Macro-microporous zeolitic imidazole framework-8/cellulose aerogel for semi-automated pipette tip solid phase extraction of fluoroquinolones in water

In this study, Zeolitic Imidazole Framework-8/cellulose aerogel (ZIF-8/CA) hybrid was successfully fabricated through a simple doping method and ZIF-8 acted as the major component for adsorption. In order to elucidate the adsorption mechanism deeply, molecular simulation was adopted to the expound the interaction modes between ZIF-8 and the fluoroquinolones (FQs). ZIF-8/CA was used as the adsorbent for semi-automated pipette tip solid phase extraction (PT-SPE). In combination with high performance liquid chromatography tandem fluorescence detector (HPLC-FLD), the established method was successfully employed to determine trace amount of FQs in water samples. Extraction parameters such as the content of ZIF-8, pH of sample solution, volume of sample, flow rate of sampling, type and volume of elution solvent were investigated. Under the optimized conditions, satisfactory linearity was achieved with the correlation coefficient (R²) ranging from 0.9954 to 0.9992. The limits of detection were in the range of 0.337-1.707 ng L^-1. And the recoveries varied from 75.9% to 96.8% with RSD less than 8.0%. The established method was demonstrated to be sensitive, efficient and convenient.

Microextraction and its application for petroleum and crude oil samples

Petroleum is an extremely heterogeneous material. It consists of a wide range of aliphatic, aromatic, and compounds containing heteroatoms such as metals, sulfur, and nitrogen. The American Society for Testing and Materials (ASTM) methods are used globally as accepted analytical methods for petroleum, petrochemicals, and fuels. A major drawback of ASTM methods is that they require multistep sample preparation that consumes substantial volumes of samples. Thus, the challenge in the petrochemical analysis is to develop rapid and simpler sample preparation procedures that can be automated. An assessment based on the current literature, specifically on the sample preparation of petroleum samples, leads to the authors' conclusion that microextraction provides an excellent complement to current methods. In this review, solvent and sorbent-based microextraction techniques in the context of the consideration of petroleum and crude oil, and samples related to the petrochemical industry, are discussed.

A molecularly imprinted polymer based monolith pipette tip for solid-phase extraction of 2,4-dichlorophenoxyacetic acid in an aqueous sample

This paper presents a simple approach for fabrication of a pipette tip solid-phase extraction (PT-SPE) device, which possesses a monolith structure with low back pressure and has high selectivity to 2,4-dichlorophenoxyacetic acid (2,4-D). Pipette tips were packed with molecularly imprinted polymers (MIPs) as a selective adsorbent and high-density polyethylene (HDPE) as a co-sintering agent, and then heated to form a monolith extraction device. The key factors including the particle size and amount of packing material, and the type and volume of elution solvent, which influence PT-SPE device performance were optimized. A packing material of 40 mg/0.20 mL in a ratio of 4/6 (MIPs/HDPE) and treatment temperature of 150 °C was selected. By the determination with high-performance liquid chromatography (HPLC-SPD), the extraction device was found to have a good extraction recovery for a 2,4-D lake water sample at a low concentration (0.006 mg L-1) with an enrichment factor about 50. The proposed method provided a simple approach for the fabrication of a PT-SPE monolith device with reduced back pressure and wall effect, which are very important for improving the extraction efficiency. And the device will have promising application in the extraction of a variety of analytes in complex samples.

Preparation of porous aromatic framework modified graphene oxide for pipette-tip solid-phase extraction of theophylline in tea

A new material called as porous aromatic frameworks modified graphene oxide (PAFs-GO) was synthesized, and it was used as an adsorbent in pipette-tip SPE for the effective purification and enrichment of theophylline in tea sample by HPLC. The properties of PAFs-GO were characterized by field emission SEM, FTIR, thermogravimetry analysis and Brunauer Emmett Teller N₂ adsorption-desorption analysis. The results of static adsorption and dynamic adsorption test showed PAFs-GO had higher adsorption ability (93.25 mg/g) than graphene oxide. The LOD and LOQ of the method were 0.0141 and 0.0471 µg/mL, respectively. The acceptable method reproducibility was found as intra- and inter-day precisions, yielding the RSDs <4.62%. By introducing PAFs as support skeleton, the specific surface area of GO was effectively increased, and the penetrability was improved. Studies showed that the proposed method had been successfully applied for purification and enrichment of theophylline in complex tea matrix.

Magnetic extractant with an Fe3O4@SiO2 core and aqueous ammonia coating for microextraction of petroleum acids

Custom-made magnetic aqueous ammonia was prepared for rapid and selective extraction of petroleum acids.

Trace determination of chlorpheniramine in human plasma using magnetic dispersive solid-phase extraction based on a graphene oxide/Fe3O4@polythionine nanocomposite combined with high-performance liquid chromatography

Graphene oxide/Fe₃O₄@polythionine (GO/Fe₃O₄@PTh) nanocomposite was fabricated for magnetic dispersive solid-phase extraction and high-performance liquid chromatography-ultraviolent detection (HPLC) of chlorpheniramine in human plasma.

Magnetic graphene solid-phase extraction in the determination of polycyclic aromatic hydrocarbons in water

Magnetic graphene nanocomposite was fabricated and applied to the extraction of PAHs in water, followed by GC-MS. The method showed a good linearity. The limits of detection (S/N = 3) were in a range between 0.02–14.3 ng L⁻¹.