Vertical Alignment of Liquid Crystals on Phenylphenoxymethyl-Substituted Polystyrene—PS Derivatives Structurally Similar to LC Molecules

A series of polystyrene derivatives containing precursors of liquid crystal (LC) molecules, phenylphenoxymethyl-substituted polystyrene (PPHE#; # = 5, 15, 25, 50, 75, and 100)—where # is the molar content of 4-phenylphenol using polymer modification reactions—were prepared in order to examine the effect of the polymer film, which possess similar LC molecular structure on the LC alignment properties. It was found that the Tg values of the PPHE# were higher than 100 °C due to their aromatic structure in the biphenyl-based PHE moiety. The LC cells fabricated with PPHE5 and PPHE15 films exhibited planar LC alignment. Conversely, LC molecules showed a vertical alignment in LC cells made using the polymer films with phenylphenoxymethyl side groups in the range of 25–100 mol %. The polar surface energies on the PPHE# films can be associated with the vertical LC alignment on the PPHE# films. For example, vertical LC alignment was exhibited when the polar surface energy of the polymer films was less than approximately 4.2 mJ/m2. Aligning stability was observed at 200 °C and UV irradiation of 20 J/cm2 for LC cells made using the PPHE100 film. Therefore, it was found that biphenyl, one of the LC precursors, modified polystyrene derivatives and can produce a next-generation vertical LC alignment system.

Effect of Position and Structure of the Terminal Moieties in the Side Group on the Liquid Crystal Alignment Behavior of Polystyrene Derivatives

We synthesized a series of polystyrene derivatives containing various side groups, such as the 4-(tert-butyl)-phenoxymethyl, 3-(tert-butyl)-phenoxymethyl, 2-(tert-butyl)-phenoxymethyl, 4-cumyl-phenoxymethyl, and 4-trityl-phenoxymethyl groups, through a polymer modification reaction to examine the liquid crystal (LC) alignment of these derivatives. In general, the vertical LC alignment on polymer films can be affected by the position and structure of the terminal moiety of the polymer side group. For example, the LC cells fabricated with 4-(tert-butyl)-phenoxymethyl-substituted polystyrene having a tert-butyl moiety as a para-type attachment to the phenoxy groups of the polystyrene derivatives exhibited vertical LC alignment, whereas the LC cells prepared from 3-(tert-butyl)- and 2-(tert-butyl)-phenoxymethyl-substituted polystyrene films exhibited planar LC alignment. In addition, the LC cells fabricated from 4-cumyl- and 4-trityl-phenoxymethyl-substituted polystyrene films with additional phenyl rings in the side groups exhibited planar LC alignment, in contrast to the LC alignment of the (tert-butyl)-phenoxymethyl-substituted polystyrene series. The vertical LC orientation was well correlated with the surface energy of these polymer films. For example, vertical LC orientation, which mainly originates due to the nonpolar tertiary carbon moiety having bulky groups, was observed when the surface energy of the polymer was lower than 36.6 mJ/m2.

Vertical Orientation of Liquid Crystal on Polystyrene Substituted with n-alkylbenzoate-p-oxymethyl Pendant Group as a Liquid Crystal Precursor

We synthesized a series of polystyrene derivatives modified with precursors of liquid crystal (LC) molecules via polymer modification reactions. Thereafter, the orientation of the LC molecules on the polymer films, which possess part of the corresponding LC molecular structure, was investigated systematically. The precursors and the corresponding derivatives used in this study include ethyl-p-hydroxybenzoate (homopolymer P2BO and copolymer P2BO#, where # indicates the molar fraction of ethylbenzoate-p-oxymethyl in the side chain (# = 20, 40, 60, and 80)), n-butyl-p-hydroxybenzoate (P4BO), n-hexyl-p-hydroxybenzoate (P6BO), and n-octyl-p-hydroxybenzoate (P8BO). A stable and uniform vertical orientation of LC molecules was observed in LC cells fabricated with P2BO#, with 40 mol% or more ethylbenzoate-p-oxymethyl side groups. In addition, the LC molecules were oriented vertically in LC cells fabricated with homopolymers of P2BO, P4BO, P6BO, and P8BO. The water contact angle on the polymer films can be associated with the vertical orientation of the LC molecules in the LC cells fabricated with the polymer films. For example, vertical LC orientation was observed when the water contact angle of the polymer films was greater than ~86°. Good orientation stability was observed at 150 °C and with 20 J/cm2 of UV irradiation for LC cells fabricated with the P2BO film.

Vertical Orientation of Liquid Crystal on Comb-Like 4-(trans-4-alkylcyclohexyl)phenoxymethyl-substituted Polystyrene Containing Liquid Crystal Precursor

We synthesized a series of polystyrene derivatives modified with precursors of liquid crystal (LC) molecules, including 4-(trans-4-ethylcyclohexyl)phenol (homopolymer PECH and copolymer PECH#; # = 5, 10, 15, 20, 40, 60, and 80, where # indicates the molar fraction of 4-(trans-4-ethylcyclohexyl)phenoxymethyl in the side chain), 4-(trans-4-propylcyclohexyl)phenol (PPCH), 4-(trans-4-butylcyclohexyl)phenol (PBCH), and 4-(trans-4-amylcyclohexyl)phenol (PAmCH) via polymer modification reactions in order to investigate the orientation of LC molecules on polymer films exhibiting part of the LC molecular structure. A stable and uniform vertical orientation of LC molecules was observed in LC cells fabricated with PECH#, having 15 mol% or more of 4-(trans-4-ethylcyclohexyl)phenoxymethyl side groups. In addition, the vertical orientation of LC molecules was observed in LC cells fabricated with homopolymers of PECH, PPCH, PBCH, and PAmCH. The water contact angle on the polymer films could be associated with the vertical orientation of the LC molecules in the LC cells fabricated with polymer films. For example, a vertical LC orientation was observed when the water contact angle of the polymer films was higher than ~81°. Good orientation stability was observed at 200 °C and 15 mW/cm2 of UV irradiation for LC cells fabricated with PECH films.

Alignment Layer of Liquid Crystal Using Plant-Based Isoeugenol-Substituted Polystyrene

We synthesized a series of renewable and plant-based isoeugenol-substituted polystyrenes (PIEU#, # = 100, 80, 60, 40, and 20, where # is the molar percent content of isoeugenol moiety), using polymer modification reactions to study their liquid crystal (LC) alignment behavior. In general, the LC cells fabricated using polymer film with a higher molar content of isoeugenol side groups showed vertical LC alignment behavior. This alignment behavior was well related to the surface energy value of the polymer layer. For example, vertical alignments were observed when the polar surface energy value of the polymer was smaller than approximately 3.59 mJ/m2, generated by the nonpolar isoeugenol moiety with long and bulky carbon groups. Good alignment stability at 100 °C and under ultraviolet (UV) irradiation of 15 J/cm2 was observed for the LC cells fabricated using PIEU100 as a LC alignment layer. Therefore, renewable isoeugenol-based materials can be used to produce an eco-friendly vertical LC alignment system.

Decreasing the Residual DC Voltage by Neutralizing the Charged Mobile Ions in Liquid Crystals

The decrease of the residual direct current (DC) voltage (Vrdc) of the anti-parallel liquid crystal (LC) cell using silver (Ag)-doped Polyimide (Ag-d-PI) alignment layers is presented in this manuscript. A series of Ag/PI composite thin layers are prepared by spurting or doping PI thin layers with Ag nano-particles, and Ag/PI composite thin layers are highly transparent and resistive. LC are homogeneously aligned between 2.0 mg/ml Ag-d-PI alignment layers, and the Vrdc of the cell that assembled with Ag-d-PI alignment layers decreases about 82%. The decrease of Vrdc is attributed to the trapping and neutralizing of mobile ions by Ag nano-particles. Regardless of the effect of Ag nano-particles on the conductivity of Ag-d-PI alignment layers, the voltage holding ratio (VHR) of the cells is maintained surprisingly. The experiment results reveal a simple design for a low Vrdc LC cell.

Renewable, Eugenol-Modified Polystyrene Layer for Liquid Crystal Orientation

We synthesized a series of plant-based and renewable, eugenol-modified polystyrene (PEUG#) (# = 20, 40, 60, 80, and 100, in which # is the molar content of the eugenol moiety in the side group). Eugenol is extracted from clove oil. We used polymer modification reactions to determine the liquid crystal (LC) orientation properties of the polymer films. In general, the LC cells fabricated using the polymer films with a higher molar content of eugenol side groups exhibited vertical LC orientation behavior. The vertical orientation behavior was well correlated with the surface energy value of the polymer films. The vertical LC orientation could be formed due to the low polar surface energy value on the polymer film generated by the nonpolar carbon group. Electro-optical performances (e.g., voltage holding ratio (VHR), residual DC voltage (R-DC), and thermal orientation stabilities) were good enough to be observed for LC cells using PEUG100 polymer as an eco-friendly LC orientation material.