Mechanic-Driven Biodegradable Polyglycolic Acid/Silk Fibroin Nanofibrous Scaffolds Containing Deferoxamine Accelerate Diabetic Wound Healing

The extracellular matrix (ECM), comprising of hundreds of proteins, mainly collagen, provides physical, mechanical support for various cells and guides cell behavior as an interactive scaffold. However, deposition of ECM, especially collagen content, is seriously impaired in diabetic wounds, which cause inferior mechanical properties of the wound and further delay chronic wound healing. Thus, it is critical to develop ECM/collagen alternatives to remodel the mechanical properties of diabetic wounds and thus accelerate diabetic wound healing. Here, we firstly prepared mechanic-driven biodegradable PGA/SF nanofibrous scaffolds containing DFO for diabetic wound healing. In our study, the results in vitro showed that the PGA/SF-DFO scaffolds had porous three-dimensional nanofibrous structures, excellent mechanical properties, biodegradability, and biocompatibility, which would provide beneficial microenvironments for cell adhesion, growth, and migration as an ECM/collagen alternative. Furthermore, the data in vivo showed PGA/SF-DFO scaffolds can adhere well to the wound and have excellent biodegradability, which is helpful to avoid secondary damage by omitting the removal process of scaffolds. The finite element analysis results showed that the application of silk fibroin-based scaffolds could significantly reduce the maximum stress around the wound. Besides, PGA/SF-DFO scaffolds induced collagen deposition, re-vascularization, recovered impaired mechanical properties up to about 70%, and ultimately accelerated diabetic wound healing within 14 days. Thus, our work provides a promising therapeutic strategy for clinically chronic wound healing.

Modified Alginate-Based Hydrogel as a Carrier of the CB2 Agonist JWH133 for Bone Engineering

Alginate hydrogels have been widely used as excellent scaffold materials for implantation in biological systems because of their good biocompatibility. However, it is difficult to repair bone defects with these materials because of their poor mechanical properties. The aim of the present study was to fabricate a novel degradable alginate/palygorskite (PAL) composite hydrogel with good mechanical properties and investigate its potential for application in bone defect repair. The modified alginate-based hydrogel with increasing PAL content exhibited better mechanical properties than the original alginate hydrogel. In addition, the resulting composite hydrogel was thoroughly characterized by scanning electron microscopy (SEM). With increasing PAL content, the swelling ratio of the hydrogel increased in PBS (pH = 7.4). In vitro cytocompatibility was evaluated using bone marrow-derived mesenchymal stem cells (BMSCs) to confirm that the developed composite hydrogel was cytocompatible after 1, 3, and 7 days. All these results suggest that the developed composite hydrogel has great potential for bone tissue engineering applications. JWH133 is a selective agonist of cannabinoid receptor type 2 (CB2), which exerts dual anti-inflammatory and anti-osteoclastogenic effects. We co-cultured BMSCs with composite hydrogels loaded with JWH133, and analysis of proliferation and osteogenic differentiation indicated that the composite hydrogel loaded with JWH133 may enhance the osteogenic differentiation of rat BMSCs. Furthermore, we found that the composite hydrogel loaded with JWH133 inhibited osteoclast formation and the mRNA expression of osteoclast-specific markers. In summary, the developed composite hydrogel has a high drug-loading capacity, good biocompatibility, and strong potential as a drug carrier for treating osteoporosis by promoting osteoblast and inhibiting osteoclast formation and function.

Electrodeposition of calcium phosphate onto polyethylene terephthalate artificial ligament enhances graft-bone integration

It is a big challenge to develop a polyethylene terephthalate (PET) artificial ligament with excellent osteogenetic activity to enhance graft-bone integration for ligament reconstruction. Herein, we evaluated the effect of biomineralization (BM) and electrodeposition (ED) method for depositing calcium-phosphate (CaP) on the PET artificial ligament in vitro and in vivo. Scanning electron microscopy and energy-dispersive X-Ray spectrometer mapping analysis revealed that the ED-CaP had more uniform particles and element distribution (Ca, P and O), and thermogravimetric analysis showed there were more CaP on the PET/ED-CaP than the PET/BM-CaP scaffold. Moreover, the hydrophilicity of PET scaffolds was significantly improved after CaP deposition. In vitro study showed that CaP coating via BM or ED method could improve the attachment and proliferation of MC3T3-E1 cells, and ED-CaP coating significantly increased osteogenic differentiation of the cells, in which the Wnt/β-catenin signaling pathway might be involved. In addition, radiological, histological and immunohistochemical results of in vivo study in a rabbit anterior cruciate ligament (ACL) reconstruction model demonstrated that the PET/BM-CaP and PET/ED-CaP scaffolds significantly improved graft-bone integration process compared to the PET scaffold. More importantly, larger areas of new bone ingrowth and the formation of fibrocartilage tissue were observed at 12 weeks in the PET/ED-CaP group, and the biomechanical tests showed increased ultimate failure load and stiffness in PET/ED-CaP group compared to PET/BM-CaP and PET group. Therefore, ED of CaP is an effective strategy for the modification of PET artificial ligament and can enhance graft-bone integration both in vitro and in vivo.

ZnO-assisted coating of tetracalcium phosphate/ gelatin on the polyethylene terephthalate woven nets by atomic layer deposition

A new kind of coating consisting of zinc oxide (ZnO)/tetracalcium phosphate (TTCP)/gelatin (Gel) on the PET woven nets is prepared chemically by the method of atomic layer deposition (ALD) and hydrothermal method. The prepared materials are confirmed by XRD and SEM. XRD results show that ZnO and TTCP are well coated on the surface of PET woven nets and ALD-assisted ZnO leads to a surprising coating adhesion of about 8 MPa. Furthermore, SEM results indicate the diameter and morphology of ZnO, TTCP and Gel of PET woven nets. And the water contact angles of PET’s surface are decreased with ZnO, TTCP and Gel of PET woven nets. Moreover, the confocal imaging of NIH3T3 cells shows that the obtained product could promote the cells proliferation, which indicates that the good biocompatibility of the prepared PET/ZnO/TTCP/ Gel woven builds a foundation for their future application. The results aim to obtain an efficient method to modify PET for fabricating an ideal artificial implant meeting the clinical needs, and imply a positive effect in promoting the compatibility of PET for enhancing graft-bone healing after implantation.

Natural Fibrous Protein for Advanced Tissue Engineering Applications: Focusing on Silk Fibroin and Keratin

As one of the important branches of natural biopolymer, natural fibrous protein has a lot of advantages including good mechanical properties, excellent biocompatibility, controllable biodegradability, renewability, abundant sources, and so on. Moreover, natural fibrous protein is also a protein that could only be used for structure supporting without any bioactivities, which attracts a lot of attentions in the field of tissue engineering scaffold. This chapter is taking silk fibroin and keratin as model materials of natural fibrous protein, focusing on their protein structure, chemical compositions, processing and extraction methods, chemical modification methods, and their applications in tissue engineering through advanced manufacturing.

Silk fibroin coating through EDC/NHS crosslink is an effective method to promote graft remodeling of a polyethylene terephthalate artificial ligament

Anterior cruciate ligament reconstruction using polyethylene terephthalate artificial ligaments is one of the research hotspots in sports medicine but it is still challenging to achieve biological healing. The purpose of this study was to modify polyethylene terephthalate ligament with silk fibroin through ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC)/N-hydroxysuccinimide (NHS) crosslink and to investigate the performance of graft remodeling in vitro and in vivo. After silk fibroin coating, changes in the surface properties of ligament were characterized by scanning electron microscopy, attenuated total reflectance-Fourier transform infrared spectroscopy and water contact angle measurements. The compatibility of polyethylene terephthalate ligament with silk fibroin coating was investigated in vitro. The results showed the silk fibroin coating significantly improved adhesion, proliferation and extracellular matrix secretion of fibroblast cells. Moreover, a rabbit anterior cruciate ligament reconstruction model was established to evaluate the effect of ligament with silk fibroin coating in vivo. The gross observation and histological results showed that the silk fibroin coating significantly inhibited inflammation response and promoted new tissue regeneration with fusiform cells infiltration in and around the graft. Furthermore, the expressions of collagen I protein and mRNA in the silk fibroin-coated polyethylene terephthalate group were much higher than those in the control group according to the immunohistochemical and real-time polymerase chain reaction results. Therefore, silk fibroin coating through EDC/NHS crosslink promotes the biocompatibility and remodeling process of polyethylene terephthalate artificial ligament in vitro and in vivo. It can be considered as a potential solution to the problem of poor remodeling of artificial ligaments after anterior cruciate ligament reconstruction in the clinical applications.

Silk fibroin and hydroxyapatite segmented coating enhances graft ligamentization and osseointegration processes of the polyethylene terephthalate artificial ligament in vitro and in vivo

A silk fibroin and hydroxyapatite segmented coating ligament is fabricated to enhances graft ligamentization and osseointegration processes successfully.