Kinetics, isotherm, mechanism, and recyclability of novel nano-sized Ce4+-doped Ni-Al layered double hydroxide for defluoridation of aqueous solutions

Excessive fluoride removal from aqueous solutions is of utmost importance as it has an adverse impact on human health. This study investigates the defluoridation efficiency of a novel nano-sized Ce+4-doped Ni/Al layered double hydroxide (Ni-Al-Ce LDH) for aqueous solutions. The synthesized Ni-Al-Ce LDH exhibited a well-defined nanoscale plate-like morphology and a high surface area with an average size of 11.51 nm, which contributed to its enhanced fluoride adsorption capacity. XRD, SEM, HRTEM, and BET studies confirmed these characteristics. XPS analysis confirmed the presence of Ce4+ ions within the Ni-Al LDH. The experimental results indicated that the process of defluoridation followed a pseudo-second-order model of kinetics, suggesting a chemisorption mechanism. The fluoride adsorption isotherms demonstrated well fits to the Freundlich, Langmuir, and Jovanovic models, indicating both monolayer and multilayer fluoride adsorption on the Ce-doped Ni-Al LDH. The maximum adsorption capacity was found to be 238.27 mg/g (Langmuir) and 130.73 mg/g (Jovanovic) at pH 6.0 and 25 °C. The proposed mechanisms for fluoride adsorption on the LDH include ion exchange, surface complexation, hydrogen bonding, and ligand exchange. The Ni-Al-Ce LDH nanomaterial exhibited good recyclability, maintaining 71% of the fluoride adsorption efficiency even after four consecutive cycles. This study highlights the significant role of Ce doping in improving the performance of Ni-Al LDH as a defluoridation adsorbent.

Controllable Doping of Mn into Ni0.075-xMnxAl0.025(OH)2(CO3)0.0125·yH2O for Efficient Adsorption of Fluoride Ions

Here, the structural, optical, and adsorptive behaviors of Ni_0.075-xMn_xAl_0.025(OH)₂(CO₃)_0.0125·yH₂O (Ni-Mn/Al) layered double hydroxides (LDHs) are investigated to capture fluoride from aqueous media. The 2D mesoporous plate-like Ni-Mn/Al LDHs are successfully prepared via a co-precipitation method. The molar ratio of divalent to trivalent cations is maintained at 3:1 and the pH at 10. The X-ray diffraction (XRD) results confirm that the samples consist of pure LDH phases with a basal spacing of 7.66 to 7.72 Å, corresponding to the (003) planes at 2θ of 11.47^o and the average crystallite sizes of 4.13 to 8.67 nm. The plate-like Mn-doped Ni-Al LDH consists of many superimposed nanosheets with a size of 9.99 nm. Energy-dispersive X-ray and X-ray photoelectron spectroscopies confirm the incorporation of Mn²⁺ into the Ni-Al LDH. UV-vis diffuse reflectance spectroscopy results indicate that incorporating Mn²⁺ into LDH enhances its interaction with light. The experimental data from the batch fluoride adsorption studies are subjected to kinetic models such as pseudo-first order and pseudo-second order. The kinetics of fluoride retention on Ni-Mn/Al LDH obey the pseudo-second-order model. The Temkin equation well describes the equilibrium adsorption of fluoride. The results from the thermodynamic studies also indicate that fluoride adsorption is exothermic and spontaneous.

High-efficient and rapid removal of anionic and cationic dyes using a facile synthesized sole adsorbent NiAlFe-layered triple hydroxide (LTH)

It would be extremely momentous to familiarize a low-cost sole adsorbent NiAlFe-layered triple hydroxides (LTHs) having a strong sorption affinity towards both anionic and cationic dyes. Using the urea hydrolysis hydrothermal method LTHs were fabricated and by altering the ratio of participant metal cations the adsorbent was optimized. BET analysis revealed that the optimized LTHs possess an elevated surface area (160.04 m²/g) while TEM and FESEM analysis portrayed the stacked sheets-like 2D morphology. LTHs were employed for the amputation of anionic congo red (CR) and cationic brilliant green (BG) dye. The adsorption study showed that within 20 and 60 min, respectively, maximum adsorption capacities were achieved at 57.47 mg/g and 192.30 mg/g for CR and BG dye. Adsorption isotherm, kinetics, and thermodynamics study revealed that both chemisorptions with physisorptions were the assertive factor for the dye encapsulation. This enhanced adsorption performance of the optimized LTH for the anionic dye is attributed to its inherent anions exchange properties and new bond formation with the adsorbent skeleton. Whereas for the cationic dye, it was because of the formation of strong hydrogen bonds, and electrostatic interaction. Morphological manipulation of LTHs, formulates the optimized adsorbent LTH111, provokes the adsorbent for this elevated adsorption performance. Overall, this study revealed that LTHs have a high potential for the effectual remediation of dyes from wastewater as a sole adsorbent at a low cost.

Cobalt-Free Layered LiNi0.8Mn0.15Al0.05O2/Graphene Aerogel Composite Electrode for Next-Generation Li-Ion Batteries

In this work, we introduce LiNi_0.8Mn_0.15Al_0.05O₂ (NMA), which is cobalt-free and has a high nickel content, and a conductive composite material to NMA by supporting it with a three-dimensional (3D) graphene aerogel (GA). With an easy freeze-drying approach, NMA nanoparticles are properly dispersed on graphene sheets, and GA creates a strong and conductive framework, significantly improving the structure and conductivity. The structure of the pure NMA and NMA/graphene aerogel (NMA/GA) composite was investigated by X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). XRD and FE-SEM analyses clearly indicated that ultrapure NMA structures are homogeneously dispersed among the GAs. In addition, the composite structure was examined using transmission electron microscopy (TEM) to determine the dispersion mechanisms. The electrochemical cycling performance of the pure NMA and NMA/GA composite was evaluated by rate capacitance, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The synthesized NMA/GA was able to provide 89.81% specific capacity retention after the 500th cycle at C/2. The average charge/discharge rates of the obtained cathode show good electrochemical results and exhibit capacities of 190.2,186.3, 185.2, 176.2, 161.2,142.6, and 188.5 mAh g^-1 at C/20, C/10, C/5, C, 3C, 5C, and C/20, respectively. EIS data showed an improvement in the impedance of the composite containing GA. According to the results of the electrochemical tests, NMA nanoparticles formed a conductive network with its porous structure thanks to GA, formed a protective layer on the surface, prevented the side reactions between the cathode and the electrolyte, decreased the impedance of the cathode, and increased the redox kinetics. In addition, the changes in the structure were investigated in the NMA/GA composite cathode by XRD, FE-SEM, and Raman analyses at the end of the 50th, 250th, and 500th cycles. In summary, the NMA/GA cathode is expected to play an important role in lithium-ion batteries (LIBs) by taking advantage of its easy synthesis and excellent cycle stability.

Application of functionalized layered double hydroxides for heavy metal removal: A review

Layered double hydroxides (LDHs) are ionic laminar composites composed of positively charged brucite-like layers with an interlayered region containing charged compensating anions and solvation molecules. Such functional LDHs materials present a strong potential for heavy metal treatment especially for wastewater and soil, due to the large surface area and layered structure. This paper started with the background of techniques for heavy metals treatment and then discussed the potential environmental toxic effects, feasibility, stability of LDH composites. The preparation strategies of LDHs composites, and their application were summarized, followed by main mechanisms involving chelation, complexation, surface precipitation, ion exchange. This work also presented the potential environmental toxic effects, feasibility, stability of LDHs composites, reuse of waste liquid and the ratio adjustment of M²⁺ and N³⁺ for LDHs synthesis. While most efforts focused on improving the absorption capacity of LDHs by composites construction, ignoring the toxicity effects and detailed mechanism investigation. Based on a thorough review of the latest development, the challenges and perspectives would be proposed, offering promising insights on environmental purification via LDHs based materials.

Silkworm Protein-Derived Nitrogen-Doped Carbon-Coated Li[Ni0.8Co0.15Al0.05]O2 for Lithium-Ion Batteries

Li[Ni0.8Co0.15Al0.05]O2 (NCA) is a cathode material for lithium-ion batteries and has high power density and capacity. However, this material has disadvantages such as structural instability and short lifespan. To address these issues, herein, we explore the impact of N-doped carbon wrapping on NCA. Sericin, an easily obtained carbon- and nitrogen-rich component of silk cocoons, is utilized as the precursor material. The electrochemical performance evaluation of N-doped carbon-coated NCA shows that the capacity retention of 0.3 NC@NCA at 1C current density is 69.83% after 200 cycles, which is about 19% higher than the 50.65% capacity retention of bare NCA. The results reveal that the sericin-resultant N-doped carbon surface wrapping improves the cycling stability of NC@NCA.

Layered double hydroxide based materials applied in persulfate based advanced oxidation processes: Property, mechanism, application and perspectives

Recently, persulfate-based advanced oxidation processes (persulfate-AOPs) are booming rapidly due to their promising potential in treating refractory contaminants. As a type of popular two-dimensional material, layered double hydroxides (LDHs) are widely used in energy conversion, medicine, environment remediation and other fields for the advantages of high specific surface area (SSA), good tunability, biocompatibility and facile fabrication. These excellent physicochemical characteristics may enable LDH-based materials to be promising catalysts in persulfate-AOPs. In this work, we make a summary of LDHs and their composites in persulfate-AOPs from different aspects. Firstly, we introduce different structure and important properties of LDH-based materials briefly. Secondly, various LDH-based materials are classified according to the type of foreign materials (metal or carbonaceous materials, mainly). Latterly, we discuss the mechanisms of persulfate activation (including radical pathway and nonradical pathway) by these catalysts in detail, which involve (i) bimetallic synergism for radical generation, (ii) the role of carbonaceous materials in radical generation, (iii) singlet oxygen (¹O₂) production and several special nonradical mechanisms. In addition, the catalytic performance of LDH-based catalysts for contaminants are also summarized. Finally, challenges and future prospects of LDH-based composites in environmental remediation are proposed. We expect this review could bring new insights for the development of LDH-based catalyst and exploration of reaction mechanism.

Spray-dried assembly of 3D N,P-Co-doped graphene microspheres embedded with core-shell CoP/MoP@C nanoparticles for enhanced lithium-ion storage

The advancement of novel synthetic approaches for micro/nanostructural manipulation of transition metal phosphide (TMP) materials with precisely controlled engineering is crucial to realize their practical use in batteries. Here, we develop a novel spray-drying strategy to construct three-dimensional (3D) N,P co-doped graphene (G-NP) microspheres embedded with core-shell CoP@C and MoP@C nanoparticles (CoP@C⊂G-NP, MoP@⊂G-NP). This intentional design shows a close correlation between the microstructural G-NP and chemistry of the core-shell CoP@C/MoP@C nanoparticle system that contributes towards their anode performance in lithium-ion batteries (LIBs). The obtained structure features a conformal porous G-NP framework prepared via the co-doping of heteroatoms (N,P) that features a 3D conductive highway that allows rapid ion and electron passage and maintains the overall structural integrity of the material. The interior carbon shell can efficiently restrain volume evolution and prevent CoP/MoP nanoparticle aggregation, providing excellent mechanical stability. As a result, the CoP@C⊂G-NP and MoP@⊂G-NP composites deliver high specific capacities of 823.6 and 602.9 mA h g^-1 at a current density of 0.1 A g^-1 and exhibit excellent cycling stabilities of 438 and 301 mA h g^-1 after 500 and 800 cycles at 1 A g^-1. The present work details a novel approach to fabricate core-shell TMPs@C⊂G-NP-based electrode materials for use in next-generation LIBs and can be expanded to other potential energy storage applications.

Recent advances in the application of layered double hydroxides in analytical chemistry: A review

In recent years, layered double hydroxides (LDHs) have garnered a lot of attention in analytical chemistry, due to their advantages such as relatively simple synthesis, low cost, possession of large specific surface area and high catalytic activity, and biocompatibility. The most common applications of LDH in analytical chemistry such as sorbents in sample extraction, electrode materials in electrochemical sensing and color indicators in colorimetric detection have been well reported. Generally, the LDHs are prepared as composites with nanomaterials, or constructed with specific three-dimensional structures, befitting the applications desired for them. However, the applications of LDHs (as extraction sorbents, color indicators and in electrochemical sensing) are usually limited in these scenarios. To help address these challenges, future trends and developmental prospects of LDHs materials in analytical chemistry are discussed in this article. Besides, the strategies associated with the design of LDHs, including the structural aspects, for potential analytical applications are presented and reviewed.

Application of micro-impinging stream reactors in the preparation of Co and Al co-doped Ni(OH)2 nanocomposites for supercapacitors and their modification with reduced graphene oxide

High performance Ni–Co–Al(OH)_n nanocomposites as supercapacitors were prepared and modified with reduced graphene oxide within a novel micro-impinging stream reactor.

Sustainable Synthesis and Characterization of Ni-Al-Containing Double-Layered Nanocatalysts and Their Catalytic Activity

Sustainable synthesis of Ni-Al double-layered catalysts by the coprecipitation method is described. Synthesized double-layered catalysts have been characterized by X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared, and thermogravimetric analyses, which confirmed a hydrotalcite-like structure. In addition, the impact of aging time and temperature on the activity of catalyst has been investigated. Furthermore, it has been confirmed by SEM and TEM analyses that the recovered catalyst has retained its structure. It has also been observed that the prepared material has potency to catalyze the reaction without loss in the yield. To explore the reactivity of the material, the catalyst has been examined in the synthesis of N-(2-hydroxyphenyl)benzamide under solvent-free conditions. The overall process afforded the product with high purity and high yields within short time.