Spatially selective catalysis of OSA starch for preparation of Pickering emulsions with high emulsification properties

The traditional strategies of chemical catalysis and biocatalysis for producing octenyl succinic anhydride modified starch can only randomly graft hydrophobic groups on the surface of starch, resulting in unsatisfactory emulsification performance. In this work, a lipase-inorganic hybrid catalytic system with multi-scale flower like structure is designed and applied to spatially selective catalytic preparation of ocenyl succinic anhydride modified starch. With the appropriate floral morphology and petal density, lipases distributed in the "flower center" can selectively catalyze the grafting of hydrophobic groups in a spatial manner, the hydrophobic groups are concentrated on one side of starch particles. The obtaining OSA starch exhibits excellent emulsifying property, and the pickering emulsion has good protective effect on the embedded curcumin. This work provides a direction for the development of high-performance starch-based emulsifiers for the food and pharmaceutical industries, which is of great significance for improving the preparation and emulsification theory research of modified starch.

Preparation and investigation of novel endopeptidase-exopeptidase co-immobilized nanoflowers with improved cascade hydrolysis

Enzymatic hydrolysis is a promising approach for protein and food processing. However, the efficiency of this approach is constrained by the self-hydrolysis, self-agglomeration of free enzymes and the limited applicability resulted from enzymes' selectivityt. Here, novel organic-inorganic hybrid nanoflowers (AY-10@AXH-HNFs) were prepared by coordinating Cu2+ with both endopeptidase of PROTIN SD-AY10 and exopeptidase of Prote AXH. The results indicate that the AY-10@AXH-HNFs exhibited 4.1 and 9.6 times higher catalytic activity than free Prote AXH and PROTIN SD-AY10, respectively, for the enzymatic hydrolysis of N-benzoyl-L-arginine ethyl ester (BAEE). The kinetic parameters of Km, Vmax and Kcat/Km by AY-10@AXH-HNFs were determined to be 0.6 mg/mL, 6.8 mL·min/mg and 6.1 mL/(min·mg), respectively, surpassing the values obtained from free endopeptidase and exopeptidase. Furthermore, the ability of AY-10@AXH-HNFs to retain 41 % of their initial catalytic activity after undergoing 5 cycles of repeated use confirmed their stability and reusability. This study introduces a novel approach of co-immobilizing endopeptidase and exopeptidase on nanoflowers, resulting in significantly enhanced stability and reusability of the protease in catalytic applications.

Octenyl succinic anhydride modified starch with excellent emulsifying properties prepared by selective hydrolysis of supramolecular immobilized enzyme

Octenyl succinic anhydride modified starch is a common green and safe emulsifier. Although the conventional pretreatment method of free enzyme hydrolysis increases the hydroxyl content on the starch surface, thus improving the grafting degree of octenyl succinic anhydride and the amphiphilicity of the modified starch, the amylose and amylopectin structures are indiscriminately hydrolyzed, reducing the emulsion stability of modified starch. In this work, α-amylase organic-inorganic hybrid nanoflower biocatalyst is designed and synthesized for pretreatment of synthetic octenyl succinic anhydride modified starch. The α-amylase organic-inorganic hybrid nanoflower biocatalyst with a unique micro-nano spatial structure can selectively hydrolyze the amylopectin and protect the amylose of starch. The amylose ratio of starch pretreated by nanoflower biocatalyst is about twice that of starch pretreated by free enzyme, reaching 22.62 %. Meanwhile, the granular structure of starch is not damaged. The obtained octenyl succinic anhydride modified starch exhibits a high degree of substitution, up to 0.0213. The emulsion prepared with this modified starch maintains excellent emulsifying properties and stability. This study provides a novel strategy for the preparation of octenyl succinic anhydride modified starch with excellent emulsifying properties, which promote the application of octenyl succinic anhydride modified starch in food, pharmaceutical and cosmetic industries.

Immobilization of Bacillus amyloliquefaciens protease "Neutrase" as hybrid enzyme inorganic nanoflower particles: A new biocatalyst for aldol-type and multicomponent reactions

Organic-inorganic hybrid nanoflowers (hNFs) with commercial protease "Neutrase" is proposed and characterized as efficient and green biocatalysts for promiscuous catalysis in aldol-type and multicomponent reactions. Neutrase hNFs [Neutrase-(Cu/Ca/Co/Mn)₃(PO₄)₂] are straightforwardly prepared through mixing metal ion (Cu²⁺, Ca²⁺, Co²⁺ or Mn²⁺) aqueous solutions with Neutrase in phosphate buffer (pH 7.4, 10 mM) resulting in precipitation (3 days). The hNFs were characterized by various techniques including scanning electron microscopy (SEM), energy dispersive X-ray (EDX), element mapping, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). In SEM images, the metal-Neutrase complexes revealed flower-like or granular structures after hybridization. The effect of metal ions and enzyme concentrations on the morphology and enzyme activity of the Neutrase-hNFs was examined. The synthesized Neutrase-Mn hNFs showed superior activity and stability compared to free Neutrase. Traditional organic CC coupling reactions such as aldol condensation, decarboxylative aldol, Knoevenagel, Hantzsch-type reactions and synthesis of 4H-pyran derivatives were used to test the generality and scope of Neutrase promiscuity, while optimizing conditions for the Neutrase-Mn hNF biocatalyst. Briefly, Neutrase-Mn₃(PO₄)₂ hNFs showed excellent enzyme activity, stability and reusability, qualifying as effective reusable catalysts for coupling reactions under mild conditions.

Recent Advances in Electrochemical Sensing Strategies for Food Allergen Detection

Food allergy has been indicated as the most frequent adverse reaction to food ingredients over the past few years. Since the only way to avoid the occurrence of allergic phenomena is to eliminate allergenic foods, it is essential to have complete and accurate information on the components of foodstuff. In this framework, it is mandatory and crucial to provide fast, cost-effective, affordable, and reliable analysis methods for the screening of specific allergen content in food products. This review reports the research advancements concerning food allergen detection, involving electrochemical biosensors. It focuses on the sensing strategies evidencing different types of recognition elements such as antibodies, nucleic acids, and cells, among others, the nanomaterial role, the several electrochemical techniques involved and last, but not least, the ad hoc electrodic surface modification approaches. Moreover, a selection of the most recent electrochemical sensors for allergen detection are reported and critically analyzed in terms of the sensors’ analytical performances. Finally, advantages, limitations, and potentialities for practical applications of electrochemical biosensors for allergens are discussed.

1,1'-Carbonyldiimidazole-copper nanoflower enhanced collapsible laser scribed graphene engraved microgap capacitive aptasensor for the detection of milk allergen

The bovine milk allergenic protein, 'β-lactoglobulin' is one of the leading causes of milk allergic reaction. In this research, a novel label-free non-faradaic capacitive aptasensor was designed to detect β-lactoglobulin using a Laser Scribed Graphene (LSG) electrode. The graphene was directly engraved into a microgapped (~ 95 µm) capacitor-electrode pattern on a flexible polyimide (PI) film via a simple one-step CO₂ laser irradiation. The novel hybrid nanoflower (NF) was synthesized using 1,1'-carbonyldiimidazole (CDI) as the organic molecule and copper (Cu) as the inorganic molecule via one-pot biomineralization by tuning the reaction time and concentration. NF was fixed on the pre-modified PI film at the triangular junction of the LSG microgap specifically for bio-capturing β-lactoglobulin. The fine-tuned CDI-Cu NF revealed the flower-like structures was viewed through field emission scanning electron microscopy. Fourier-transform infrared spectroscopy showed the interactions with PI film, CDI-Cu NF, oligoaptamer and β-lactoglobulin. The non-faradaic sensing of milk allergen β-lactoglobulin corresponds to a higher loading of oligoaptamer on 3D-structured CDI-Cu NF, with a linear range detection from 1 ag/ml to 100 fg/ml and attomolar (1 ag/ml) detection limit (S/N = 3:1). This novel CDI-Cu NF/LSG microgap aptasensor has a great potential for the detection of milk allergen with high-specificity and sensitivity.

Bacillus circulans MTCC 7906 aided facile development of bioconjugate nano-silica alkaline protease formulation with superlative dehairing potential

The tannery industries utilize environmentally hazardous chemicals to achieve dehairing of animal hides, which causes enormous waterbed pollution & high TDS load. Alkaline protease enzyme for dehairing can be an effective solution to resolve the environmental problems of the tannery industry waste. However, stable, cost-efficient and eco-benign formulations of alkaline protease need to be developed for commercial applications in the tannery industry. This works aimed at development of a nano-formulation of the enzyme alkaline protease (AKP) as a bioconjugate nano silica-alkaline protease enzyme (BC-SiNP-AKP). This work reports one pot green synthesis of the BC-SiNP-AKP bionanoconjugate complex which included both biotemplating and immobilization of the AKP on to the synthesized silica nanoparticles from cell-free extracts of Bacillus circulans grown in potato peel based medium. Among the cell free crude, acetone concentrated and purified sols of the enzyme AKP, acetone precipitated enzyme sol was found to be best for the biological SiNP synthesis and formation of BC-SiNP-AKP conjugate. The BC-SiNP-AKP had size ranging from 100 to 200 nm with crystalline morphologies varying from spherical, tubular to laminated crystallites. The developed bioconjugate formulation displayed 1.7-fold increase in the enzyme activity post nano-conjugation with superlative dehairing potential on goat skin. The optimized parameters for dehairing were found to be as temperature 37 °C for 24 h of incubation and with enzyme to buffer ratio (2: 50 mL). Thereafter, the dehaired skin was assessed for its histopathological effects, which were found to be safe without any deteriorative changes. The developed formulation is environmentally congenial for its use as depilating agent for animal hides in terms of being green, single pot and cost effective synthesis.

Organic-Inorganic Hybrid Nanoflower Production and Analytical Utilization: Fundamental to Cutting-Edge Technologies

Over the past decade, science has experienced a growing rise in nanotechnology with ground-breaking contributions. Through various laborious technologies, nanomaterials with different architectures from 0 D to 3 D have been synthesized. However, the 3 D flower-like organic-inorganic hybrid nanomaterial with the most direct one-pot green synthesis method has attracted widespread attention and instantly become research hotspot since its first allusion in 2012. Mild synthesis procedure, high surface-to-volume ratio, enhanced enzymatic activity and stability are the main factor for its rapid development. However, its lower mechanical strength, difficulties in recovery from the reaction system, lower loading capacity, poor reusability and accessibility of enzymes are fatal, which hinders its wide application in industry. This review first discusses the selection of non-enzymatic biomolecules for the synthesis of hybrid nanoflowers followed by the innovative advancements made in organic-inorganic hybrid nanoflowers to overcome aforementioned issues and to enhance their extensive downstream applications in transduction technologies. Besides, the role of hybrid nanoflower has been successfully utilized in many fields including, water remediation, biocatalyst, pollutant adsorption and decolourization, nanoreactor, biosensing, cellular uptake and others, accompanied with several quantification technologies, such as ELISA, electrochemical, surface plasmon resonance (SPR), colorimetric, and fluorescence were comprehensively reviewed.

Characterization and immobilization of protease secreted by the fungus Moorella speciosa

Protease was extracellularly produced in submerged fermentation by the fungus Moorella speciosa with maximum activity of 8.6 × 10³ U/mL. The optimal pH and temperature for enzyme activity were 6.78 and 60.88 °C, respectively. The enzyme was incubated in the presence of several ions at concentrations of 0.1 M and 0.01 M to address the effect on enzyme activity. Enzyme activity was increased by 56% and 130% in the presence of 0.1 M BaCl₂ and of 0.01 M Na₂SO₄, respectively. The V _max and K _m values were 0.01474 U/min/mg protein and 0.04190 mg/mL, respectively. The enzyme retained about 90% of enzymatic activity at 90 °C. Among the methods tested for enzyme immobilization, adsorption onto MAT540 carrier led to the most promising results, since after 15 reuse cycles up to 60% of the initial catalytic activity was retained. Entrapment in calcium alginate matrix allowed to retain up to 51% of the initial catalytic activity after 8 reuse cycles. This protease from M. speciosa, in either free or immobilized form, can be foreseen as a useful biocatalytic tool in process design by reducing operating costs, decreasing the use of chemical processing and, consequently, meeting the global demand for clean technologies.

Synthesis of magnetic nanoflower immobilized lipase and its continuous catalytic application

We have synthesized a kind of magnetic lipase–Cu₃(PO₄)₂ nanoflowers (lipase@MNFs), which can be separated quickly from the reaction system under the external magnetic field. Compared with free lipase, the lipase@MNFs exhibited higher enzymatic activity (∼110%) and stability.

Multiscale immobilized lipase for rapid separation and continuous catalysis

Enzyme–inorganic hybrid nanoflowers have drawn extensive research interest for enzyme immobilization owing to their enhanced enzymatic activity, high surface area, and excellent chemical stability.