1
|
Shin CH, Lee HY, Gyan-Barimah C, Yu JH, Yu JS. Magnesium: properties and rich chemistry for new material synthesis and energy applications. Chem Soc Rev 2023; 52:2145-2192. [PMID: 36799134 DOI: 10.1039/d2cs00810f] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/18/2023]
Abstract
Magnesium (Mg) has many unique properties suitable for applications in the fields of energy conversion and storage. These fields presently rely on noble metals for efficient performance. However, among other challenges, noble metals have low natural abundance, which undermines their sustainability. Mg has a high negative standard reduction potential and a unique crystal structure, and its low melting point at 650 °C makes it a good candidate to replace or supplement numerous other metals in various energy applications. These attractive features are particularly helpful for improving the properties and limits of materials in energy systems. However, knowledge of Mg and its practical uses is still limited, despite recent studies which have reported Mg's key roles in synthesizing new structures and modifying the chemical properties of materials. At present, information about Mg chemistry has been rather scattered without any organized report. The present review highlights the chemistry of Mg and its uses in energy applications such as electrocatalysis, photocatalysis, and secondary batteries, among others. Future perspectives on the development of Mg-based materials are further discussed to identify the challenges that need to be addressed.
Collapse
Affiliation(s)
- Cheol-Hwan Shin
- Department of Energy Science and Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu, 42988, Republic of Korea.
| | - Ha-Young Lee
- Department of Energy Science and Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu, 42988, Republic of Korea.
| | - Caleb Gyan-Barimah
- Department of Energy Science and Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu, 42988, Republic of Korea.
| | - Jeong-Hoon Yu
- Department of Energy Science and Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu, 42988, Republic of Korea.
| | - Jong-Sung Yu
- Department of Energy Science and Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu, 42988, Republic of Korea.
| |
Collapse
|
2
|
Wang J, Guo RT, Bi ZX, Chen X, Hu X, Pan WG. A review on TiO 2-x-based materials for photocatalytic CO 2 reduction. NANOSCALE 2022; 14:11512-11528. [PMID: 35917276 DOI: 10.1039/d2nr02527b] [Citation(s) in RCA: 29] [Impact Index Per Article: 14.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Photocatalytic CO2 reduction technology has a broad potential for dealing with the issues of energy shortage and global warming. As a widely studied material used in the photocatalytic process, titanium dioxide (TiO2) has been continuously modified and tailored for more desirable application. Recently, the defective/reduced titanium dioxide (TiO2-x) catalyst has attracted broad attention due to its excellent photocatalytic performance for CO2 reduction. In this perspective review, we comprehensively present the recent progress in TiO2-x-based materials for photocatalytic CO2 reduction. In detail, the review starts with the fundamentals of CO2 photocatalytic reduction. Then, the synthesis of a defective TiO2 structure is introduced for the regulation of its photocatalytic performance, especially its optical properties and dissociative adsorption properties. In addition, the current application of TiO2-x-based photocatalysts for CO2 reduction is also highlighted, such as metal-TiO2-x, oxide-TiO2-x and TiO2-x-carbon-based photocatalysts. Finally, the existing challenges and possible scope of photocatalytic CO2 reduction over TiO2-x-based materials are discussed. We hope that this review can provide an effective reference for the development of more efficient and reasonable photocatalysts based on TiO2-x.
Collapse
Affiliation(s)
- Juan Wang
- College of Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai, China.
| | - Rui-Tang Guo
- College of Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai, China.
- Shanghai Engineering Research Center of Power Generation Environment Protection, Shanghai, China
| | - Zhe-Xu Bi
- College of Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai, China.
| | - Xin Chen
- College of Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai, China.
| | - Xing Hu
- College of Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai, China.
| | - Wei-Guo Pan
- College of Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai, China.
- Shanghai Engineering Research Center of Power Generation Environment Protection, Shanghai, China
| |
Collapse
|
3
|
Fang C, Luo Y, Zhang X, Zhang H, Nolan A, Naidu R. Identification and visualisation of microplastics via PCA to decode Raman spectrum matrix towards imaging. CHEMOSPHERE 2022; 286:131736. [PMID: 34352542 DOI: 10.1016/j.chemosphere.2021.131736] [Citation(s) in RCA: 31] [Impact Index Per Article: 15.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/03/2021] [Revised: 07/22/2021] [Accepted: 07/28/2021] [Indexed: 06/13/2023]
Abstract
To visualise microplastics and nanoplastics via Raman imaging, we need to scan the sample surface over a pixel array to collect Raman spectra as a matrix. The challenge is how to decode this spectrum matrix to map accurate and meaningful Raman images. This study compares two decoding approaches. The first approach is used when the sample contains several known types of microplastics whose standard spectra are available. We can map the Raman intensity at selected characteristic peaks as images. In order to increase the image certainty, we employ a logic-based algorithm to merge several images that are simultaneously mapped at several characteristic peaks to one image. However, the rest of the signals other than the selected peaks are ignored, meaning a low signal-noise ratio. The second approach for decoding is used when samples are complicated and standard spectra are not available. We employ principal component analysis (PCA) to decode the spectrum matrix. By selecting principal components (PC) and generating PC score curves to mimic the Raman spectrum, we can justify and assign the suspected items to microplastics and other materials. By mapping the PC loadings as images, microplastics and other materials can be simultaneously visualised. We analyse a sample containing two known microplastics to validate the effectiveness of the PCA-based algorithm. We then apply this method to analyse "unknown" microplastics printed on paper to extract Raman spectra from the complicated background and individually assign the images to paper fabric/additive, black carbon and microplastics, etc. Overall, the PCA-based algorithm shows some advantages and suggests a further step to decode Raman spectrum matrices towards machine learning.
Collapse
Affiliation(s)
- Cheng Fang
- Global Centre for Environmental Remediation (GCER), University of Newcastle, Callaghan, NSW, 2308, Australia; Cooperative Research Centre for Contamination Assessment and Remediation of the Environment (CRC CARE), University of Newcastle, Callaghan, NSW, 2308, Australia.
| | - Yunlong Luo
- Global Centre for Environmental Remediation (GCER), University of Newcastle, Callaghan, NSW, 2308, Australia; Cooperative Research Centre for Contamination Assessment and Remediation of the Environment (CRC CARE), University of Newcastle, Callaghan, NSW, 2308, Australia
| | - Xian Zhang
- Key Lab of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen, 361021, China
| | - Hongping Zhang
- State Key Laboratory of Environmental Friendly Energy Materials, Engineering Research Centre of Biomass Materials, Ministry of Education, School of Materials Science and Engineering, Southwest University of Science and Technology, Sichuan, 621010, China
| | - Annette Nolan
- Ramboll Australia, The Junction, NSW, 2291, Australia
| | - Ravi Naidu
- Global Centre for Environmental Remediation (GCER), University of Newcastle, Callaghan, NSW, 2308, Australia; Cooperative Research Centre for Contamination Assessment and Remediation of the Environment (CRC CARE), University of Newcastle, Callaghan, NSW, 2308, Australia
| |
Collapse
|
4
|
Kim S, Kim S, Lee S. Renewable Activated Carbon Filters Bearing Photocatalytic Particles for Volatile Organic Compound Removal. Chempluschem 2022; 87:e202100486. [PMID: 34984862 DOI: 10.1002/cplu.202100486] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/01/2021] [Revised: 12/16/2021] [Indexed: 11/07/2022]
Abstract
As interest in improving indoor air quality has increased, the development of long-lasting adsorbents that effectively and economically remove volatile organic compounds (VOCs) has become critical. In this study, TiO2-bearing activated carbon is introduced as a photocatalytic adsorbent in a renewable VOC filter. The activated carbon filter bearing TiO2 particles is prepared using the sol-gel method, followed by a spraying method. VOC adsorption and photocatalytic activity of the TiO2-bearing activated carbon are analyzed using a Tedlar bag sampling technique, using toluene and acetaldehyde as sample of VOC gas. Under ultraviolet-C (UV-C) irradiation for 22 h, the photocatalytic activity of TiO2 regenerates the VOC filters by 99 %. In addition, under UV-A and light-emitting diode, the TiO2-bearing activated carbon filters are regenerated by 60 % and 58 %, respectively, after 22 h. This result establishes its practical applicability as a renewable indoor VOC filter.
Collapse
Affiliation(s)
- Seongjin Kim
- Department of Chemical Engineering, Konkuk University, 120 Neungdong-ro, Gwangjin-gu, 05029, Seoul, Republic of Korea
| | - Semun Kim
- Department of Chemical Engineering, Konkuk University, 120 Neungdong-ro, Gwangjin-gu, 05029, Seoul, Republic of Korea
| | - Seungae Lee
- Department of Chemical Engineering, Konkuk University, 120 Neungdong-ro, Gwangjin-gu, 05029, Seoul, Republic of Korea
| |
Collapse
|
5
|
Rodríguez-González V, Sasaki M, Ishii J, Khan S, Terashima C, Suzuki N, Fujishima A. Indoor gas phase photoactivity of yttrium modified titanate films for fast acetaldehyde oxidation. CHEMOSPHERE 2021; 275:129992. [PMID: 33662721 DOI: 10.1016/j.chemosphere.2021.129992] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/05/2020] [Revised: 02/01/2021] [Accepted: 02/09/2021] [Indexed: 06/12/2023]
Abstract
Photoactive materials hold structural and catalytic features that make them particularly suitable for environmental applications and in the present work, protonated H3Ti3O7-Y nanofiber-like materials were prepared via the microwave assisted hydrothermal technique. The as-prepared nanofibers exhibited high surface area with titanate structure. The nanofibers, before and after yttrium incorporation, were well-distributed and the fibrous morphology could be observed clearly; as the yttrium loading increased, ribbons and the anatase phase were formed. Practical films of these nanofibers confirmed their likely UV-photoactive properties with 200 ppm of acetaldehyde degradation within 25 min in the presence of 50% of humidity. Activity retention was achieved, keeping stability for 2 consecutive cycles at room temperature. Nowadays, the increase in home office work sets human health at risk, for the exposure to toxic volatile organic compounds and microorganisms such as viruses and bacteria is more frequent indoors. In this context, the synthesized photoactive yttrium-titanate films stand as upcoming practical UV-driven materials for cleaning pollution that concentrated urban activity and indoor environments.
Collapse
Affiliation(s)
- Vicente Rodríguez-González
- Instituto Potosino de Investigación Científica y Tecnológica (IPICyT), División de Materiales Avanzados, Camino a La Presa San José 2055, Lomas 4a. Sección 78216, San Luis Potosí, Mexico; Photocatalysis International Research Center, Research Institute for Science & Technology, And Faculty of Science and Technology, Tokyo University of Science, 2641 Yamazaki, Noda, Chiba, 278-8510, Japan.
| | - Mao Sasaki
- Photocatalysis International Research Center, Research Institute for Science & Technology, And Faculty of Science and Technology, Tokyo University of Science, 2641 Yamazaki, Noda, Chiba, 278-8510, Japan.
| | - Junki Ishii
- Photocatalysis International Research Center, Research Institute for Science & Technology, And Faculty of Science and Technology, Tokyo University of Science, 2641 Yamazaki, Noda, Chiba, 278-8510, Japan.
| | - Sovann Khan
- Photocatalysis International Research Center, Research Institute for Science & Technology, And Faculty of Science and Technology, Tokyo University of Science, 2641 Yamazaki, Noda, Chiba, 278-8510, Japan.
| | - Chiaki Terashima
- Photocatalysis International Research Center, Research Institute for Science & Technology, And Faculty of Science and Technology, Tokyo University of Science, 2641 Yamazaki, Noda, Chiba, 278-8510, Japan; Research Center for Space Colony, Tokyo University of Science, 2641 Yamazaki, Noda-shi, Chiba, 278-8510, Japan; Research Initiative for Supra-Materials, Shinshu University, Wakasato, Nagano, 380-8553, Japan.
| | - Norihiro Suzuki
- Photocatalysis International Research Center, Research Institute for Science & Technology, And Faculty of Science and Technology, Tokyo University of Science, 2641 Yamazaki, Noda, Chiba, 278-8510, Japan; Research Center for Space Colony, Tokyo University of Science, 2641 Yamazaki, Noda-shi, Chiba, 278-8510, Japan.
| | - Akira Fujishima
- Photocatalysis International Research Center, Research Institute for Science & Technology, And Faculty of Science and Technology, Tokyo University of Science, 2641 Yamazaki, Noda, Chiba, 278-8510, Japan.
| |
Collapse
|
6
|
Lekshmi MV, Shiva Nagendra SM, Maiya MP. Heterogeneous Photocatalysis for Indoor Air Purification: Recent Advances in Technology from Material to Reactor Modeling. LECTURE NOTES IN CIVIL ENGINEERING 2020. [DOI: 10.1007/978-981-15-1334-3_16] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/28/2023]
|
7
|
Composite photocatalysts based on TiO2 – carbon for air pollutant removal: Aspects of adsorption. Catal Today 2020. [DOI: 10.1016/j.cattod.2018.09.027] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|