Thiol-based chemically modified carbon screen-printed electrode for simultaneous quantification of trace level Pb(II) and Cd(II)

Present work reports, the development of a novel electrochemical sensor based on a diazonium-coupling reaction and covalent attachment of the -NH2 group of cysteamine (Cyst) on screen-printed carbon electrode (SPCE), for simultaneous determination of Pb(II) and Cd(II). Initially, the in-situ generated 4-carboxyphenyl (4-CP) diazonium salt was electro-grafted to generate 4-CP/SPCE, followed by covalent bonding of terminal carboxylic group of 4-CP with -NH2 group of Cyst to give Cyst/4-CP/SPCE. The modified electrode showed an enhanced selectivity and sensitivity toward the quantification of Pb(II) and Cd(II) using square wave anodic stripping voltammetry (SWASV) without mutual interference. Under optimal experimental conditions, the newly designed sensor showed a wide linear range of 0.01 µM to 0.7 µM. The limit of detection (LOD) obtained was 0.882 nM (0.09 ppb) and 0.65 nM (0.134 ppb) for Cd(II) and Pb(II), respectively. The modified SPCE exhibited good stability, selectivity, and reproducibility. Furthermore, the sensor was successfully applied for the determination of Pb(II) and Cd(II) ions in water samples which illustrated excellent recoveries in different spiked samples and the results were in line with the standard ICP-AES analysis.

A new bodipy/pillar[5]arene functionalized magnetic sporopollenin for the detection of Cu(II) and Hg(II) ions in aqueous solution

In this study, a new bodipy/pillar[5]arene functionalized magnetic MS-Sp-P[5]-bodipy microcapsule sensor was prepared based on the use of environmentally friendly for the selective and sensitive detection of Cu(II) and Hg(II) ions in aqueous media. SEM results used in the characterization process of the materials synthesized at each stage confirmed the structural and morphological changes in the pore structure, while other characterization results (FT-IR and XRD) elucidated the role of pillar[5]arene compound and bodipy dye in the synthesis of magnetic microcapsule sensors. The colloidal solution of MS-Sp-P[5]-bodipy (water/ethanol)) showed two fluorescence bands centered at 402 and 540 nm. The detection limits of MS-Sp-P[5]-bodipy for Hg(II) and Cu(II) were calculated to be 0.06 µM and 2.27 µM, respectively (at 540 nm). The linear range of the magnetic sensor for Hg(II) and Cu(II) was found to be in the range of 1-150 µM and 10-150 µM, respectively. The experimental results (response time, pH, temperature, sensitivity and selectivity) demonstrated the applicability and potential of the prepared magnetic microcapsule sensor for the detection of Cu(II) and Hg(II) in water and tap water samples containing heavy metal ions.

A highly selective Hg2+ colorimetric sensor and antimicrobial agent based on green synthesized silver nanoparticles using Equisetum diffusum extract

Plasmonic nanoparticles such as Ag have gained great interest in the biomedical domain and chemical analysis due to their unique optical properties. Herein, we report a simple, cost-effective, and highly selective colorimetric sensor of mercury(ii) based on E. diffusum (horsetail) extract-functionalized Ag nanoparticles (ED-AgNPs). The ED-AgNPs were synthesized by exploiting the coordination of Ag+ with the various functional groups of ED extract under sunlight exposure for only tens of seconds. ED-AgNPs (63 nm) were characterized using various techniques such as UV-vis, FTIR, DLS, SEM and EDX. FTIR spectra suggested the successful encapsulation of the AgNPs surface with ED extract and XRD confirmed its crystalline nature. This ED-AgNPs colorimetric sensor revealed remarkable selectivity towards Hg2+ in aqueous solution among other transition metal ions through a redox reaction mechanism. Besides, the sensor exhibited high sensitivity with rapid response and a detection limit of 70 nM. The sensor demonstrated feasibility for Hg(ii) detection in spiked tap and river water samples. In addition, the synthesized ED-AgNPs revealed enhanced antimicrobial activity with higher efficacy against the Gram-positive bacterium (L. monocytogenes with an inhibition zone of 18 mm) than the Gram-negative bacterium (E. coli with an inhibition zone of 10 mm). The simplicity and adaptability of this colorimetric sensor render it a promising candidate for on-site and point-of-care detection of heavy metal ions in diverse conditions.

Specifically functionalized MTT-Ag NP/SA film sensor for the ultrasensitive detection of Hg2+ in lettuce samples

In the present study, highly efficient 5-Methyl-1,3,4-thiadiazole-2-thiol-modified silver nanoparticles (MTT-Ag NPs) were successfully synthesized and could be used for convenient and sensitive detection of Hg2+. MTT acts as a protective agent by forming Ag-S bonds with Ag NPs, meantime, MTT can also be captured Hg2+ through NN bonds. Furthermore, to improve the sustainability and stability of MTT-Ag NPs, sodium alginate (SA) was used as a substrate material for the formation of SA-MTT-Ag NPs films. As expected, SA-MTT-Ag NPs could be stored for more than 180 days at room temperature. When used SA-MTT-Ag NPs thin films as colourimetric sensors for detection of Hg2+ in lettuce, the low detection limit could be down to 0.22 μM (44 ppb) with wide linear range (0-1 µM and 1-150 µM) and good recovery (96.25 % - 98.75 %). Therefore, the method enables highly selective and efficient monitoring of Hg2+ in food samples.

Vinyl-functionalized polyphenolic-carbon dot-based fluorometric turn-off-on biosensor for the dual detection of mercury and cysteine and their in vivo sensing in zebrafish larvae

The fluorometric turn-off-on biosensor was developed for the ultra-sensitive detection of mercury (Hg²⁺) and cysteine (Cys) utilizing the highly fluorescent carbon dots (CDs). Herein, the sophisticated low-temperature reflux-mediated reaction was adopted using precursors namely citric acid (CA) and polyphenolic kaempferol (KMP) by using dimethylformamide (DMF) as a solvent. The resulting CDs (i.e., CKCDs) were in the highly negative charged groups (-OH) presented with a bright-orange fluorescence. These CKCDs were functionalized with 4-vinylaniline (4-VA) by employing EDC/NHS coupling reaction, which switched its photoluminescence (PL) towards the strong-blue colored emission and termed as V-CKCDs. The functionalized V-CKCDs can be capable enough to detect mercury via the strong electrostatic interactions between positively charged Hg²⁺ cations and negatively charged anions (-OH groups). Hence, an adequate fluorescence quenching was observed in V-CKCDs with the lowest concentrations of Hg²⁺ around 0.5 μM. Significantly, after adding the complex of V-CKCDs-Hg²⁺ to the Cys, the fluorescence enhancement was observed. This might be attributed from the strong interactions between Hg²⁺ in the fluorescence sensing system and thiol (-SH) moieties from the Cys. The developed V-CKCDs are highly sensitive for detecting Hg²⁺ and Cys, which showed detection limits of 10.6 and 42. 48 nM, respectively. Also, the in vivo studies were investigated in zebrafish larvae using V-CKCDs for the detection of Hg²⁺ and Cys. The V-CKCDs were investigated in the real water samples and human serum to detect Hg²⁺ and Cys, respectively.

Environmental monitoring of trace metal pollutants using cellulosic-paper incorporating color change of azo-chromophore

An essential requirement for colorimetric paper-sensor is to allow the target analytes (heavy metal ions) to access the chromophore while maintaining strong chromophore immobilization on the porous substrate surface. This work evaluates the selection of sensitive chromophores (dithizone, 1-(2-pyridylazo) 2-naphthol and 4-(2-pyridylazo)-resorcinol) and their immobilization strategies on paper sensors. Dithizone (DTz) are capable of producing a significant color transition at unadjusted pH, observed by UV-Vis absorption spectroscopy and visible recognition. After immobilizing DTz on a paper substrate (cellulose acetate/chitosan substrate), the DTz-paper sensor showed a distinctive color change from blue-green to peach-pink upon reaction with Pb²⁺ ions, and the color intensity was proportional to the metal concentration. Quantitative analysis using RGB (R:Red; G:Green; B:Blue) plots showed that increasing DTz concentration on the CA/CS paper sensor increases the difference in total color intensity (∆I_T) and the difference in red code intensity (∆I_R). This is due to the formation of more DTz-Pb²⁺ complexes on the CA/CS paper substrate. The CA/CS paper strips immobilized with 100 ppm DTz showed practical potential for rapid detection of heavy metal ions. The DTz-CA/CS paper sensor showed significant color change when detecting spiked heavy metals ions (0.1 ppm Pb²⁺, 2.0 ppm Zn²⁺, and 0.2 ppm Cu²⁺) in river water samples that prepared at the maximum permissible limit for industrial effluent in Malaysia.

Optical chemosensors for environmental monitoring of toxic metals related to Alzheimer's disease

Alzheimer's disease (AD) is the most common type of dementia and progresses from mild memory loss to severe decline in thinking, behavioral and social skills, which dramatically impairs a person's ability to function independently. Genetics, some health disorders and lifestyle have all been connected to AD. Also, environmental factors are reported as contributors to this illness. The presence of heavy metals in air, water, food, soil and commercial products has increased tremendously. Accumulation of heavy metals in the body leads to serious malfunctioning of bodily organs, specifically the brain. For AD, a wide range of heavy metals have been reported to contribute to its onset and progression and the manifestation of its hallmarks. In this review, we focus on detection of highly toxic heavy metals such as mercury, cadmium, lead and arsenic in water. The presence of heavy metals in water is very troubling and regular monitoring is warranted. Optical chemosensors were designed and fabricated for determination of ultra-trace quantities of heavy metals in water. They have shown advantages when compared to other sensors, such as selectivity, low-detection limit, fast response time, and wide-range determination under optimal sensing conditions. Therefore, implementing optical chemosensors for monitoring levels of toxic metals in water represents an important contribution in fighting AD.

This review briefly summarizes evidence that links toxic metals to onset and progression of Alzheimer's disease. It discusses the structure and fabrication of optical chemosensors, and their use for monitoring toxic metals in water.

Au nanoparticle-hydrogel nanozyme-based colorimetric detection for on-site monitoring of mercury in river water

A sensitive on-site mercury sensing platform was developed for simple and effective monitoring of mercury levels in the field. The simple and practical mercury detection system was designed by integrating an Au nanoparticle-PEG hydrogel block nanozyme (Au-HBNz) into a polymer film-based colorimetric device. Upon addition of Hg²⁺ ions, Au-HBNz exhibited excellent peroxidase-like activity, catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine into a blue-colored product, which has a maximum absorbance at 652 nm. The resulting color intensity change was evaluated using a smartphone for simple and rapid Hg²⁺ detection with a broad detection range (0.008-20 μg∙mL^-1) and a linear concentration-response relationship (R² = 0.96). The detection limit (1.10 ng∙mL^-1) was lower than the maximum permissible Hg²⁺ levels in drinking water set by the World Health Organization (6 ng∙mL^-1) and U.S. Environmental Protection Agency (2 ng∙mL^-1). The recoveries of Hg²⁺ determination in river water by spiking Hg²⁺ samples ranged from 92 to 106%, which indicated high validity and applicability of the Hg²⁺ detection system for field measurements. Thus, the developed sensor enables highly selective and efficient real-time monitoring of Hg²⁺.

Highly selective simultaneous determination of Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii) in water samples using microfluidic paper-based analytical devices

A new paper-based analytical device design was fabricated by a wax printing method for simultaneous determination of Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii). Colorimetry was used to quantify these heavy metal ions using bathocuproine (Bc), dimethylglyoxime (DMG), dithizone (DTZ), and 4-(2-pyridylazo) resorcinol (PAR) as complexing agents. The affinity of complexing agents to heavy metal ions is dependent on the formation constant (Kf). To enhance the selectivity for heavy metal ion determination, the new device was designed with two pretreatment zones, where masking agents remove the interfering ions. It was found that two pretreatment zones worked better than a single pretreatment zone at removing interferences. The reaction time, sample and complexing agent volumes, and complexing agent concentrations were optimized. The analytical results were achieved with the lowest detectable concentrations of 0.32, 0.59, 5.87, 0.20, and 0.11 mg L-1 for Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii), respectively. The linear ranges were found to be 0.32-63.55 mg L-1 (Cu(ii)), 0.59-4.71 mg L-1 (Co(ii)), 5.87-352.16 mg L-1 (Ni(ii)), 0.20-12.04 mg L-1 (Hg(ii)), and 0.11-0.55 mg L-1 (Mn(ii)). The lowest detectable concentration and linearity for the five metal ions allow the application of this device for the determination of heavy metal ions in various water samples. The sensor showed high selectivity and efficiency for simultaneous determination of Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii) in drinking, tap, and pond water samples on a single device and detection with the naked eye. The results illustrated that the proposed sensor showed good accuracy and precision agreement with the standard ICP-OES method.

Reduced texaphyrin: A ratiometric optical sensor for heavy metals in aqueous solution

We report here a water-soluble metal cation sensor system based on the as-prepared or reduced form of an expanded porphyrin, texaphyrin. Upon metal complexation, a change in the redox state of the ligand occurs that is accompanied by a color change from red to green. Although long employed for synthesis in organic media, we have now found that this complexation-driven redox behavior may be used to achieve the naked eye detectable colorimetric sensing of several number of less-common metal ions in aqueous media. Exposure to In(III), Hg(II), Cd(II), Mn(II), Bi(III), Co(II), and Pb(II) cations leads to a colorimetric response within 10 min. This process is selective for Hg(II) under conditions of competitive analysis. Furthermore, among the subset of response-producing cations, In(III) proved unique in giving rise to a ratiometric change in the ligand-based fluorescence features, including an overall increase in intensity. The cation selectivity observed in aqueous media stands in contrast to what is seen in organic solvents, where a wide range of texaphyrin metal complexes may be prepared. The formation of metal cation complexes under the present aqueous conditions was confirmed by reversed phase high-performance liquid chromatography, ultra-violet-visible absorption and fluorescence spectroscopies, and high-resolution mass spectrometry.

A natural cyanobacterial protein C-phycoerythrin as an Hg2+ selective fluorescent probe in aqueous systems

C-phycoerythrin (CPE) as a natural protein-based fluorescence ‘turn off’ probe for Hg²⁺ in aqueous systems.

Long-Term Stability Monitoring of Printed Proteins on Paper-Based Membranes

Monitoring of long-term stability of proteins on paper-based membranes is important as it is directly related to paper-based sensor fabrication. By using a simple piezo printhead inkjet printer, recombinant proteins and antibodies were printed on paper-based membranes to test their stability and sensitivity under varying lengths of storage and temperature conditions. Our data show that a printed IgG-HRP antibody on simple printing paper maintains >50% functionality up to ∼2 months under 4 and -20 °C storage. Antibodies printed on polyvinylidene difluoride (PVDF) and nitrocellulose showed 5.3 and 9.7% decreases, respectively, in initial signal intensities compared to printing paper. Prostate-specific membrane antigen and tumor necrosis factor alpha recombinant proteins printed on paper-based membranes can be detected by antibodies, and antibody signal intensities can be detected up to 28 days after storage at 4 and -20 °C when printed on PVDF membrane or printing paper. These data suggest that printed proteins on simple printing paper and PVDF membrane can maintain their functionality up to few months when stored at 4 °C or lower and can be potentially applied in paper-based sensor development.

Environmentally friendly synthesis of photoluminescent biochar dots from waste soy residues for rapid monitoring of potentially toxic elements

Waste biomass was used as a carbon precursor to prepare photoluminescent biochar dots for economical and eco-friendly monitoring of Hg²⁺ and Fe³⁺ ions.