Hydrodeoxygenation of isocyanates: snapshots of a magnesium-mediated C[double bond, length as m-dash]O bond cleavage

Gallium Hydride-Catalyzed Selective Hydroboration of Unsaturated Organic Substrates

The first examples of tetrasubstituted conjugated bis-guanidinate (CBG) supported monomeric and thermally stable gallium dihalides [LGaX2], (X=Cl (Ga-Cl), I (Ga-I)) and dihydride (Ga-H) [LGaH2] (where L={(ArHN)(ArN)-C=N-C=(NAr)(NHAr)}; Ar=2,6-Et2-C6H3) compounds are reported. The reaction of in situ generated LLi with 1.0 equiv. GaX3 (X=Cl, I) afforded compounds Ga-Cl and Ga-I. The reaction between Ga-Cl and Li[HBEt3] in benzene yielded the dihydride compound Ga-H. All reported compounds (Ga-Cl, Ga-I, and Ga-H) were characterized by NMR, HRMS, and single-crystal X-ray diffraction studies. Ga-H was probed for the hydroboration of carbodiimides (CDI), isocyanates, and isothiocyanates with HBpin. Compound Ga-H was also found effective for the catalytic hydroboration of imines, nitriles, alkynes, esters, and formates, affording the corresponding products in quantitative yields. Stoichiometric reactions with a CDI were performed to establish the catalytic cycle.

Lanthanide Mimicking by Magnesium for Oxazolidinone Synthesis

In the last decade, magnesium complexes have emerged as a viable alternative to transition-metal catalysts for the hydrofunctionalization of unsaturated bonds. However, their potential for advanced catalytic reactions has not been thoroughly investigated. To address this gap, we have developed a novel magnesium amide compound (3) using a PNP framework that is both bulky and flexible. Our research demonstrates that compound 3 can effectively catalyze the synthesis of biologically significant oxazolidinone derivatives. This synthesis involves a tandem reaction of hydroalkoxylation and cyclohydroamination of isocyanate using propargyl alcohol. Furthermore, we conducted comprehensive theoretical calculations to gain insights into the reaction mechanism. It is important to note that these types of transformations have not been reported for magnesium and would significantly enhance the catalytic portfolio of the 7th most abundant element.

Carbodiimide and Isocyanate Hydroboration by a Cyclic Carbodiphosphorane Catalyst

We report hydroboration of carbodiimide and isocyanate substrates catalyzed by a cyclic carbodiphosphorane catalyst. The cyclic carbodiphosphorane outperformed the other Lewis basic carbon species tested, including other zerovalent carbon compounds, phosphorus ylides, an N-heterocyclic carbene, and an N-heterocyclic olefin. Hydroborations of seven carbodiimides and nine isocyanates were performed at room temperature to form N-boryl formamidine and N-boryl formamide products. Intermolecular competition experiments demonstrated the selective hydroboration of alkyl isocyanates over carbodiimide and ketone substrates. DFT calculations support a proposed mechanism involving activation of pinacolborane by the carbodiphosphorane catalyst, followed by hydride transfer and B-N bond formation.

NHC-Silyliumylidene Cation-Catalyzed Hydroboration of Isocyanates with Pinacolborane

The low-oxidation-state silicon-catalyzed hydroboration of isocyanates with pinacolborane (HBpin) using the NHC-silyliumylidene cation catalyst [(IMe)2SiH]I (1, IMe = :C{N(Me)C(Me)}2) is described. In the catalysis, the Si lone pair electrons activate isocyanates, and the latter react with HBpin to form N-boryl formamides at room temperature. Catalyst 1 further activates N-boryl formamides at 70 °C, the intermediates of which react with HBpin to form N-boryl methylamines and (pinB)2O.

Synthesis and Reactivity of Alkali Metal Hydrido-Magnesiate Complexes which Exhibit Group 1 Metal Counter-Cation Specific Stability

Reactions of the series of alkali metal amides M(HMDS) (M = Li-Cs; HMDS = [N(SiMe3)2]-) with the neutral magnesium(II) hydride compound [Mg(BDIDipp)(μ-H)]2 (BDIDipp = [CH{C(Me)NDipp}2], Dipp = 2,6-iPr2-C6H3) have been carried out. When M = Li or Na, the reactions yielded Mg(BDIDipp)(HMDS) and MH as the primary products. In the sodium amide reaction, [Na2(HMDS)][{Mg(BDIDipp)}2(H)3] was obtained as a low-yield by-product. When M = K-Cs, the reactions gave the group 1 metal hydrido-magnesiates, M2[Mg(BDIDipp)(HMDS)(H)]2·(benzene)n (n = 0 or 1), the thermal stability of which increases with the increasing molecular weight of the alkali metal involved. Reactions of Cs2[Mg(BDIDipp)(HMDS)(H)]2·(benzene) with 18-crown-6 and CO gave the first monomeric alkali metal hydrido-magnesiate [Cs(18-crown-6)][Mg(BDIDipp)(HMDS)(H)] and the ethenediolate complex Cs2[{Mg(BDIDipp)(HMDS)}2(μ-C2H2O2)], respectively. The new synthetic route to alkali metal hydrido-magnesiates described herein may facilitate further reactivity studies of this rare compound class.

Controlled reduction of isocyanates to formamides using monomeric magnesium

This work describes a transition metal-free methodology involving an efficient and controlled reduction of isocyanates to only formamide derivatives using pinacolborane (HBpin) as the hydrogenating agent and a bis(phosphino)carbazole ligand stabilized magnesium methyl complex (1) as the catalyst. A large number of substrates undergo selective hydroboration and give exclusively N-boryl formamides.

Lithium, Tin(II), and Zinc Amino-Boryloxy Complexes: Synthesis and Characterization

Analogous to the ubiquitous alkoxide ligand, metal boroxide and boryloxy complexes are an underexplored class of hard anionic O- ligand. A new series of amine-stabilized Li, Sn(II), and Zn boryloxy complexes, comprising electron-rich tetrahedral boron centers have been synthesized and characterized. All complexes have been characterized by one-dimensional (1D), two-dimensional (2D), and DOSY NMR, which are consistent with the solid-state structures unambiguously determined via single-crystal X-ray diffraction. Electron-rich μ2- (Sn and Zn) and μ3- (Li) boryloxy binding modes are observed. Compounds 6-9 are the first complexes of this class, with the chelating bis- and tris-phenol ligands providing a scaffold that can be easily functionalized and provides access to the boronic acid pro-ligand, hence allowing facile direct synthesis of the resulting compounds. Computational quantum chemical studies suggest a significant enhancement of the π-donor ability of the amine-stabilized boryloxy ligand because of electron donation from the amine functionality into the p-orbital of the boron atom.

Selective hydroboration of electron-rich isocyanates by an NHC-copper(I) alkoxide

The (IPr)CuOtBu catalysed reduction of 11 aryl and alkyl isocyanates with pinacolborane gave only the boraformamides, pinBN(R)C(O)H, in most cases. Overreduction, which hampers almost all isocyanate hydroborations, was restricted to electron poor aryl isocyanates (4-NC-C₆H₄NCO, 4-F₃C-C₆H₄NCO, 3-O₂N-C₆H₄NCO). Computational analysis showed stability of [(IPr)CuH]2, which was proposed to be the catalyst resting state, drives selectivity, suggesting an approach to prevent overreduction in future work. In the case of iPrNCO, formation of this species renders overreduction kinetically inaccessible. For 4-NC-C₆H₄NCO, however, the barrier height for the first step of over-reduction is much lower, even relative to [(IPr)CuH]2, resulting in unselective reduction.

Magnesium Pincer Complexes and Their Applications in Catalytic Semihydrogenation of Alkynes and Hydrogenation of Alkenes: Evidence for Metal-Ligand Cooperation

The development of catalysts for environmentally benign organic transformations is a very active area of research. Most of the catalysts reported so far are based on transition-metal complexes. In recent years, examples of catalysis by main-group metal compounds have been reported. Herein, we report a series of magnesium pincer complexes, which were characterized by NMR and X-ray single-crystal diffraction. Reversible activation of H₂ via aromatization/dearomatization metal-ligand cooperation was studied. Utilizing the obtained complexes, the unprecedented homogeneous main-group metal catalyzed semihydrogenation of alkynes and hydrogenation of alkenes were demonstrated under base-free conditions, affording Z-alkenes and alkanes as products, respectively, with excellent yields and selectivities. Control experiments and DFT studies reveal the involvement of metal-ligand cooperation in the hydrogenation reactions. This study not only provides a new approach for the semihydrogenation of alkynes and hydrogenation of alkenes catalyzed by magnesium but also offers opportunities for the hydrogenation of other compounds catalyzed by main-group metal complexes.

Hydroboration of isocyanates: cobalt-catalyzed vs. catalyst-free approaches

Hydroboration of isocyanates with HBPin was demonstrated using both catalytic and catalyst-free approaches. In arene solvents, the reactions employed the commercially available and bench-stable Co(acac)₂/dpephos (dpephos = bis[(2-diphenylphosphino)phenyl] ether) pre-catalyst and proved chemodivergent, showing the formation of either formamides or N-methylamines, depending on the concentration of HBPin and the reaction conditions used. Catalytic monohydroboration of isocyanates to formamides was found to be highly chemoselective, tolerating alkenes, alkynes, aryl halides, esters, carboxamides, nitriles, nitroarenes and heteroaromatic functionalities. The catalyst-free hydroboration reactions have been demonstrated in neat HBPin. Whereas monohydroboration proved less selective compared with Co(acac)₂/dpephos-catalyzed transformations, selective deoxygenative hydroboration of isocyanates to N-methylamines was observed under catalyst-free conditions.

Applications of catalysis in hydroboration of imines, nitriles, and carbodiimides

The catalytic hydroboration of imines, nitriles, and carbodiimides is a powerful method of preparing amines which are key synthetic intermediates in the synthesis of many value-added products. Imine hydroboration has perennially featured in notable reports while nitrile and carbodiimide hydroboration have gained attention recently. Initial developments in catalytic hydroboration of imines and nitriles employed precious metals and typically required harsh reaction conditions. More recent advances have shifted toward the use of base metal and main group element catalysis and milder reaction conditions. In this survey, we review metal and nonmetal catalyzed hydroboration of these unsaturated organic molecules and group them into three distinct categories: precious metals, base metals, and main group catalysts. The TON and TOF of imine hydroboration catalysts are reported and summarized with a brief overview of recent advances in the field. Mechanistic and kinetic studies of some of these protocols are also presented.

Simple silver(I)-salt catalyzed selective hydroboration of isocyanates, pyridines, and quinolines

AgSbF₆ has been established as an effective catalyst for the hydroboration of structurally and electronically diverse isocyanates under ligand- and solvent-free conditions which selectively yielded either N-boryl formamides or N-boryl methylamines under different conditions. Further, various N-heterocycles can be selectively hydroborated using this simple catalytic system; pyridine derivatives undergo preferential 1,4 hydroboration whereas the formation of tetrahydroquinoline (after hydrolysis) via complete heterocycle hydrogenation was observed for quinolines.

s-Block Metal Catalysts for the Hydroboration of Unsaturated Bonds

The addition of a B-H bond to an unsaturated bond (polarized or unpolarized) is a powerful and atom-economic tool for the synthesis of organoboranes. In recent years, s-block organometallics have appeared as alternative catalysts to transition-metal complexes, which traditionally catalyze the hydroboration of unsaturated bonds. Because of the recent and rapid development in the field of hydroboration of unsaturated bonds catalyzed by alkali (Li, Na, K) and alkaline earth (Mg, Ca, Sr, Ba) metals, we provide a detailed and updated comprehensive review that covers the synthesis, reactivity, and application of s-block metal catalysts in the hydroboration of polarized as well as unsaturated carbon-carbon bonds. Moreover, we describe the main reaction mechanisms, providing valuable insight into the reactivity of the s-block metal catalysts. Finally, we compare these s-block metal complexes with other redox-neutral catalytic systems based on p-block metals including aluminum complexes and f-block metal complexes of lanthanides and early actinides. In this review, we aim to provide a comprehensive, authoritative, and critical assessment of the state of the art within this highly interesting research area.

Pincer-Supported Gallium Complexes for the Catalytic Hydroboration of Aldehydes, Ketones and Carbon Dioxide

Gallium hydrides stabilised by primary and secondary amines are scarce due to their propensity to eliminate dihydrogen. Consequently, their reactivity has received limited attention. The synthesis of two novel gallium hydride complexes HGa(THF)[ON(H)O] and H2 Ga[μ2 -ON(H)O]Ga[ON(H)O] ([ON(H)O]2- =N,N-bis(3,5-di-tert-butyl-2-phenoxy)amine) is described and their reactivity towards aldehydes and ketones is explored. These reactions afford alkoxide-bridged dimers through 1,2-hydrogallation reactions. The gallium hydrides can be regenerated through Ga-O/B-H metathesis from the reaction of such dimers with pinacol borane (HBpin) or 9-borabicyclo[3.3.1]nonane (9-BBN). These observations allowed us to target the catalytic reduction of carbonyl substrates (aldehydes, ketones and carbon dioxide) with low catalyst loadings at room temperature.

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Catalytic hydroboration of carbonyl derivatives by using phosphinimino amide ligated magnesium complexes

Reduction of carbonyl derivatives by using Earth-abundant, cheap, and environmentally benign metal-based catalysts through an atom-efficient method is a challenging task. Herein, we report the synthesis and characterization of dinuclear magnesium complexes 1-3 chelated by a phosphinimino amide skeleton. In combination with pinacolborane (HBpin) as a reducing agent, complex 1 bearing an ortho-methyl substituent on the phenyl ring of the ligand showed excellent reduction capability for a broad range of carbonyl derivatives under mild reaction conditions. Aldehydes, ketones, and acrolein substrates were efficiently reduced to the corresponding alkoxy-borane products with a record high TOF. Besides, acrolein derivatives were exclusively reduced to 1,2-regioselective products. Using two equiv. of HBpin, ester substrates were reduced to two kinds of alkoxy-borane products. Carbonate reduction accomplished by using complex 1 and three equiv. of HBpin afforded diols and a methanol precursor, respectively. When chiral substrates such as (S)-1,2-propanediol carbonate and L-lactide or polymeric P(L-LA) were employed, the chirality was almost retained in their reductive products.

Zinc Hydride Catalyzed Chemoselective Hydroboration of Isocyanates: Amide Bond Formation and C=O Bond Cleavage

Herein, a remarkable conjugated bis-guanidinate (CBG) supported zinc hydride, [{LZnH}₂ ; L={(ArHN)(ArN)-C=N-C=(NAr)(NHAr); Ar=2,6-Et₂ -C₆ H₃ }] (I) catalyzed partial reduction of heteroallenes via hydroboration is reported. A large number of aryl and alkyl isocyanates, including electron-donating and withdrawing groups, undergo reduction to obtain selectively N-boryl formamide, bis(boryl) hemiaminal and N-boryl methyl amine products. The compound I effectively catalyzes the chemoselective reduction of various isocyanates, in which the construction of the amide bond occurs. Isocyanates undergo a deoxygenation hydroboration reaction, in which the C=O bond cleaves, leading to N-boryl methyl amines. Several functionalities such as nitro, cyano, halide, and alkene groups are well-tolerated. Furthermore, a series of kinetic, control experiments and structurally characterized intermediates suggest that the zinc hydride species are responsible for all reduction steps and breaking the C=O bond.

Direct CO2 capture and conversion to fuels on magnesium nanoparticles under ambient conditions simply using water

Converting CO₂ directly from the air to fuel under ambient conditions is a huge challenge. Thus, there is an urgent need for CO₂ conversion protocols working at room temperature and atmospheric pressure, preferentially without any external energy input. Herein, we employ magnesium (nanoparticles and bulk), an inexpensive and the eighth-most abundant element, to convert CO₂ to methane, methanol and formic acid, using water as the sole hydrogen source. The conversion of CO₂ (pure, as well as directly from the air) took place within a few minutes at 300 K and 1 bar, and no external (thermal, photo, or electric) energy was required. Hydrogen was, however, the predominant product as the reaction of water with magnesium was favored over the reaction of CO₂ and water with magnesium. A unique cooperative action of Mg, basic magnesium carbonate, CO₂, and water enabled this CO₂ transformation. If any of the four components was missing, no CO₂ conversion took place. The reaction intermediates and the reaction pathway were identified by ¹³CO₂ isotopic labeling, powder X-ray diffraction (PXRD), nuclear magnetic resonance (NMR) and in situ attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and rationalized by density-functional theory (DFT) calculations. During CO₂ conversion, Mg was converted to magnesium hydroxide and carbonate, which may be regenerated. Our low-temperature experiments also indicate the future prospect of using this CO₂-to-fuel conversion process on the surface of Mars, where CO₂, water (ice), and magnesium are abundant. Thus, even though the overall process is non-catalytic, it could serve as a step towards a sustainable CO₂ utilization strategy as well as potentially being a first step towards a magnesium-driven civilization on Mars.

We demonstrated the use of magnesium nanoparticles (and bulk) to convert CO₂ (pure & also from the air) to methane, methanol, formic acid and green cement without external energy within a few minutes, using only water as the sole hydrogen source.

Regiodivergent Hydroborative Ring Opening of Epoxides via Selective C-O Bond Activation

A magnesium-catalyzed regiodivergent C-O bond cleavage protocol is presented. Readily available magnesium catalysts achieve the selective hydroboration of a wide range of epoxides and oxetanes yielding secondary and tertiary alcohols in excellent yields and regioselectivities. Experimental mechanistic investigations and DFT calculations provide insight into the unexpected regiodivergence and explain the different mechanisms of the C-O bond activation and product formation.

N-Methylation and Trideuteromethylation of Amines via Magnesium-Catalyzed Reduction of Cyclic and Linear Carbamates

A new reduction of carbamates to N-methyl amines is presented. The magnesium-catalyzed reduction reaction allows the conversion of cyclic and linear carbamates, including N-Boc protected amines, into the corresponding N-methyl amines and amino alcohols which are of significant interest due to their presence in many biologically active molecules. Furthermore, the reduction can be extended to the formation of N-trideuteromethyl labeled amines.

A review of thermal homogeneous catalytic deoxygenation reactions for valuable products

To remove high oxygen content is important to make high quality oil and valuable products. In this paper, the research on homogeneous catalytic deoxygenation reactions, including decarboxylation (DCX)/decarbonylation (DCN), hydrodeoxygenation (HDO) is reviewed. Based on DCX/DCN, the classic radical reactions such as the Barton decarboxylation, Henkel, Hunsdiecker and Kochi reactions were introduced, the practice and overall performance are also discussed. In addition, the different reaction pathways and mechanisms were demonstrated and the key chemical processes have been selected from the literature as examples to elaborate the critical emphasis on the mechanistic understanding. The applications of the catalytic deoxygenation reactions for high-value products have also been highlighted. Overall, this review provides insight discussions on the DO issues and progresses in homogeneous catalytic aspects.

Borohydride intermediates pave the way for magnesium-catalysed enantioselective ketone reduction

A magnesium precatalyst for the highly enantioselective hydro-boration of C[double bond, length as m-dash]O bonds is reported. The mechanistic basis of the unprecedented selectivity of this transformation has been investi-gated experimentally by isolation of catalytic intermediates and theoretically by DFT calculations. The facile formation of a magnesium borohydride species is critical in overcoming competing pathways in the selectivity-determining insertion step.

Magnesium-catalyzed hydroboration of organic carbonates, carbon dioxide and esters

A magnesium(i) complex was employed as a highly efficient precatalyst for the hydroboration of carbonates and esters under mild conditions.

Recent advances in transition metal-free catalytic hydroelementation (E = B, Si, Ge, and Sn) of alkynes

This review describes the recent advances in the transition metal-free hydroelementation of alkynes with various metalloid hydrides.

Transition metal-free catalytic reduction of primary amides using an abnormal NHC based potassium complex: integrating nucleophilicity with Lewis acidic activation

An abnormal N-heterocyclic carbene (aNHC) based potassium complex was used as a transition metal-free catalyst for reduction of primary amides to corresponding primary amines under ambient conditions. Only 2 mol% loading of the catalyst exhibits a broad substrate scope including aromatic, aliphatic and heterocyclic primary amides with excellent functional group tolerance. This method was applicable for reduction of chiral amides and utilized for the synthesis of pharmaceutically valuable precursors on a gram scale. During mechanistic investigation, several intermediates were isolated and characterized through spectroscopic techniques and one of the catalytic intermediates was characterized through single-crystal XRD. A well-defined catalyst and isolable intermediate along with several stoichiometric experiments, in situ NMR experiments and the DFT study helped us to sketch the mechanistic pathway for this reduction process unravelling the dual role of the catalyst involving nucleophilic activation by aNHC along with Lewis acidic activation by K ions.

An abnormal N-heterocyclic carbene (aNHC) based potassium complex was used as a transition metal-free catalyst for reduction of primary amides to corresponding primary amines under ambient conditions.

Magnesium hydride alkene insertion and catalytic hydrosilylation

The β-diketiminato magnesium hydride, [(BDI)MgH]]₂, reacts with alkenes and catalyses their hydrosilylation with PhSiH₃.

The dimeric β-diketiminato magnesium hydride, [(BDI)MgH]₂, reacts at 80 °C with the terminal alkenes, 1-hexene, 1-octene, 3-phenyl-1-propene and 3,3-dimethyl-butene to provide the respective n-hexyl, n-octyl, 3-phenylpropyl and 3,3-dimethyl-butyl magnesium organometallics. The facility for and the regiodiscrimination of these reactions are profoundly affected by the steric demands of the alkene reagent. Reactions with the phenyl-substituted alkenes, styrene and 1,1-diphenylethene, require a more elevated temperature of 100 °C with styrene providing a mixture of the 2-phenylethyl and 1-phenylethyl products over 7 days. Although the reaction with 1,1-diphenylethene yields the magnesium 1,1-diphenylethyl derivative as the sole reaction product, only 64% conversion was achieved over a 21 day timeframe. Reactions with the α,ω-dienes, 1,5-hexadiene and 1,7-octadiene, provided divergent results. The initial 5-alkenyl magnesium reaction product of the shorter chain diene undergoes 5-exo-trig cyclisation via intramolecular carbomagnesiation to provide a cyclopentylmethyl derivative, which was shown by X-ray diffraction analysis to exist as a three-coordinate monomer. In contrast, 1,7-octadiene provided a mixture of two compounds, a magnesium oct-7-en-1-yl derivative and a dimagnesium-octane-1,4-diide, as a result of single or two-fold activation of the terminal C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> C double bonds. The magnesium hydride was unreactive towards internal alkenes apart from the strained bicycle, norbornene, allowing the characterisation of the resultant three-coordinate magnesium norbornyl derivative by X-ray diffraction analysis. Computational analysis of the reaction between [(BDI)MgH]₂ and 1-hexene using density functional theory (DFT) indicated that the initial Mg–H/C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> C insertion process is rate determining and takes place at the intact magnesium hydride dimer. This exothermic reaction (ΔH = –14.1 kcal mol^–1) traverses a barrier of 18.9 kcal mol^–1 and results in the rupture of the dinuclear structure into magnesium alkyl and hydride species. Although the latter three-coordinate hydride derivative may be prone to redimerisation, it can also provide a further pathway to magnesium alkyl species through its direct reaction with a further equivalent of 1-hexene, which occurs via a lower barrier of 15.1 kcal mol^–1. This Mg–H/C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> C insertion reactivity provides the basis for the catalytic hydrosilylation of terminal alkenes with PhSiH₃, which proceeds with a preference for the formation of the anti-Markovnikov organosilane product. Further DFT calculations reveal that the catalytic reaction is predicated on a sequence of Mg–H/C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> C insertion and classical Si–H/Mg–C σ-bond metathesis reactions, the latter of which, with a barrier height of 24.9 kcal mol^–1, is found to be rate determining.

Snapshots of magnesium-centred diborane heterolysis by an outer sphere SN2 process

Reactions of a magnesium diboranate as a source of [Bpin]^– anions are initiated by ‘outer sphere’ attack of C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> N bonded substrates.

Reactions of the β-diketiminato magnesium diboranate derivative, [(BDI)Mg{pinB(n-Bu)Bpin}] (BDI = HC{(Me)CNDipp}₂; Dipp = 2,6-i-Pr₂C₆H₃), with N,N′-dialkyl and N,N′-diaryl carbodiimides provided the corresponding C-borylated magnesium borylamidinates. This reactivity occurs with the displacement of n-BuBpin and with the apparent addition of a nucleophilic {Bpin} anion to the electrophilic unsaturated carbodiimide carbon centres. In contrast, while analogous reactions of [(BDI)Mg{pinB(n-Bu)Bpin}] with N-alkyl or N-aryl aldimines and ketimines also resulted in facile displacement of n-BuBpin, they provided the organomagnesium products of {Bpin} addition to the imine nitrogen atom rather than the more electrophilic trigonal imine carbon. Computational assessment by density functional theory (DFT) indicated that, although the energetic differences are marginal, the organomagnesium products may be considered as the kinetic outcome of these reactions with respect to the generation of alternative amidomagnesium regioisomers. This latter deduction was borne out by the thermally-induced conversion of two such organomagnesium species to their C-borylated amidomagnesium isomers, both of which occur with negligible entropies of activation indicative of purely intramolecular processes. Detailed analysis by DFT of the reaction of [(BDI)Mg{pinB(n-Bu)Bpin}] with PhN Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CHPh indicated that B–N bond formation is initiated by attack of the imine nitrogen at the three-coordinate boron atom of the diboranate anion rather than the more crowded magnesium centre. Consistent with an effectively spontaneous reaction, the resultant cleavage of the B–B bond of the diboranate unit is accomplished via the traversal of two very modest barriers of only 8.3 and 6.7 kcal mol^–1. This analysis was also supportive of a subsequent intramolecular B–N to B–C isomerisation process. Of greater general significance, however, the addition of the {Bpin}^– anion to the reducible aldimine is best rationalised as a consequence of the electrophilic character of this three-coordinate boron centre rather than any intrinsic nucleophilicity associated with the B–B bond of the [pinBB(n-Bu)pin]^– anion.

Reactivity of a β-diketiminate-supported magnesium alkyl complex toward small molecules

The reactivity of the magnesium alkyl {[HC(C(Me)N-2,6-iPr2C6H3)2]Mg(nBu)}2 (1) toward various small molecules provides access to a variety of magnesium derivatives. For example, the insertion of elemental chalcogens (S8 and Se8) into the Mg-C bond of complex 1 gives the dimeric magnesium thiolate {[HC(C(Me)N-2,6-iPr2C6H3)2]Mg(μ-SnBu)}2 (2), magnesium selenolate [HC(C(Me)N-2,6-iPr2C6H3)2]Mg(SenBu)(THF) (3), and magnesium diselenolate [HC(C(Me)N-2,6-iPr2C6H3)2]Mg(Se2nBu)(THF) (4). Meanwhile, compound 4 can be readily obtained by further insertion of one selenium atom into complex 3. Moreover, the reactions of complex 1 with diphenyl dichalcogenides (PhSSPh and PhSeSePh) by σ bond metathesis afford the corresponding magnesium phenyl chalcogenolates [HC(C(Me)N-2,6-iPr2C6H3)2]Mg(EPh)(THF) (E = S 5, Se 6) concomitant with PhEnBu release. Furthermore, the treatment of complex 1 with benzonitrile and phenyl isothiocyanate produces the serendipitous magnesium-1-azaallyl complex [HC(C(Me)N-2,6-iPr2C6H3)2]Mg(N(H)C(Ph)[double bond, length as m-dash]CHC3H7)(DME) (7) and the diimino-thioamidato magnesium compound {κ3-N,N',N''-(ArNCMe)2[N(Ph)CS]CH}Mg[(Ph)NC(nBu)S] (8) (Ar = 2,6-iPr2C6H3). In addition, deprotonation occurs between compound 1 and 1-methylimidazole to generate the imidazolyl complex {[HC(C(Me)N-2,6-iPr2C6H3)2]Mg(μ-Im)}2 (9) (Im = 2-N-methylimidazolyl). These results indicated that the butylmagnesium complex 1 possesses high activity toward small molecules and revealed several unusual transformations. All the new compounds were characterized by various spectroscopic methods, and their solid-state structures were further confirmed by single-crystal X-ray diffraction analyses.

The complex reactivity of β-diketiminato magnesium(i) dimers towards pinacolborane: implications for catalysis

Reactions of magnesium(i) dimers with pinacolborane are complex, yielding many products (e.g. see picture). The results of this study bring into question mechanisms proposed for the magnesium(i) catalysed hydroboration of unsaturated substrates.

Cationic magnesium hydride [MgH]+ stabilized by an NNNN-type macrocycle

A magnesium hydride cation [(L)MgH]⁺ supported by a macrocyclic ligand (L = Me₄TACD; 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane) has been shown to react with Lewis acids as well as with unsaturated substrates including pyridine.

Unsymmetrical β-diketiminate magnesium(i) complexes: syntheses and application in catalytic hydroboration of alkyne, nitrile and carbonyl compounds

A series of unsymmetrical magnesium(i) complexes have been synthesized and used as highly active pre-catalysts for various hydroboration reactions.