Rotational and steric effects in water dissociative chemisorption on Ni(111)

Multilayer Multiconfiguration Time-Dependent Hartree Study on the Mode-/Bond-Specific Quantum Dynamics of Water Dissociation on Cu(111)

In this work, full-dimensional (9D) quantum dynamics calculations on mode-/bond-specific surface scattering of a water molecule on a copper (111) rigid surface are performed through the multilayer multiconfiguration time-dependent Hartree (ML-MCTDH) method. To easily perform the ML-MCTDH calculations on such a triatomic molecule-surface system, we first choose specific Jacobi coordinates as a set of coordinates of water. Next, to efficiently perform the 9D ML-MCTDH wavepacket propagation, the potential energy surface is transferred to a canonical polyadic decomposition form with the aid of a Monte Carlo-based method. Excitation-specific dissociation probabilities of H₂O on Cu(111) are computed, and mode-/bond-specific dynamics are demonstrated by comparison with a probability curve computed for a water molecule in the ground state. The dependence of the dissociation probability of the initial state of H₂O is studied, and it is found that the excitation-specific dissociation probabilities can be divided into three groups. We find that the vibrationally excited states enhance the dissociation reactivity of H₂O, while the rotationally excited states hardly influence it.

Stereodynamics of adiabatic and non-adiabatic energy transfer in a molecule surface encounter

Molecular energy transfer and reactions at solid surfaces depend on the molecular orientation relative to the surface. While such steric effects have been largely understood in electronically adiabatic processes, the orientation-dependent energy transfer in NO scattering from Au(111) was complicated by electron-mediated nonadiabatic effects, thus lacking a clear interpretation and posing a great challenge for theories. Herein, we investigate the stereodynamics of adiabatic and nonadiabatic energy transfer via molecular dynamics simulations of NO(v = 3) scattering from Au(111) using realistic initial orientation distributions based on accurate neural network fitted adiabatic potential energy surface and electronic friction tensor. Our results reproduce the observed stronger vibrational relaxation for N-first orientation and enhanced rotational rainbow for O-first orientation, and demonstrate how adiabatic anisotropic interactions steer molecules into the more attractive N-first orientation to experience more significant energy transfer. Remaining disagreements with experiment suggest the direction for further developments of nonadiabatic theories for gas-surface scattering.

First-Principles Insights into Adiabatic and Nonadiabatic Vibrational Energy-Transfer Dynamics during Molecular Scattering from Metal Surfaces: The Importance of Surface Reactivity

Energy transfer is ubiquitous during molecular collisions and reactions at gas-surface interfaces. Of particular importance is vibrational energy transfer because of its relevance to bond forming and breaking. In this Perspective, we review recent first-principles studies on vibrational energy-transfer dynamics during molecular scattering from metal surfaces at the state-to-state level. Taking several representative systems as examples, we highlight the intrinsic correlation between vibrational energy transfer in nonreactive scattering and surface reactivity and how it operates in both electronically adiabatic and nonadiabatic pathways. Adiabatically, the presence of a dissociation barrier softens a bond in the impinging molecule and increases its couplings with other molecular modes and surface phonons. In the meantime, the stronger interaction between the molecule and the surface also changes the electronic structure at the barrier, resulting in an increase of nonadiabatic effects. We further discuss future prospects toward a more quantitative understanding of this important surface dynamical process.

Mode Selective Chemistry for the Dissociation of Methane on Efficient Ni/Pt-Bimetallic Alloy Catalysts

The mode selectivity of methane dissociation is studied on three different Ni/Pt-bimetallic alloy surfaces using a fully quantum approach based on reaction path Hamiltonian. Dissociative sticking probability depends on the...

Computational approaches to dissociative chemisorption on metals: towards chemical accuracy

We review the state-of-the-art in the theory of dissociative chemisorption (DC) of small gas phase molecules on metal surfaces, which is important to modeling heterogeneous catalysis for practical reasons, and for achieving an understanding of the wealth of experimental information that exists for this topic, for fundamental reasons. We first give a quick overview of the experimental state of the field. Turning to the theory, we address the challenge that barrier heights (E_b, which are not observables) for DC on metals cannot yet be calculated with chemical accuracy, although embedded correlated wave function theory and diffusion Monte-Carlo are moving in this direction. For benchmarking, at present chemically accurate E_b can only be derived from dynamics calculations based on a semi-empirically derived density functional (DF), by computing a sticking curve and demonstrating that it is shifted from the curve measured in a supersonic beam experiment by no more than 1 kcal mol^-1. The approach capable of delivering this accuracy is called the specific reaction parameter (SRP) approach to density functional theory (DFT). SRP-DFT relies on DFT and on dynamics calculations, which are most efficiently performed if a potential energy surface (PES) is available. We therefore present a brief review of the DFs that now exist, also considering their performance on databases for E_b for gas phase reactions and DC on metals, and for adsorption to metals. We also consider expressions for SRP-DFs and briefly discuss other electronic structure methods that have addressed the interaction of molecules with metal surfaces. An overview is presented of dynamical models, which make a distinction as to whether or not, and which dissipative channels are modeled, the dissipative channels being surface phonons and electronically non-adiabatic channels such as electron-hole pair excitation. We also discuss the dynamical methods that have been used, such as the quasi-classical trajectory method and quantum dynamical methods like the time-dependent wave packet method and the reaction path Hamiltonian method. Limits on the accuracy of these methods are discussed for DC of diatomic and polyatomic molecules on metal surfaces, paying particular attention to reduced dimensionality approximations that still have to be invoked in wave packet calculations on polyatomic molecules like CH₄. We also address the accuracy of fitting methods, such as recent machine learning methods (like neural network methods) and the corrugation reducing procedure. In discussing the calculation of observables we emphasize the importance of modeling the properties of the supersonic beams in simulating the sticking probability curves measured in the associated experiments. We show that chemically accurate barrier heights have now been extracted for DC in 11 molecule-metal surface systems, some of which form the most accurate core of the only existing database of E_b for DC reactions on metal surfaces (SBH10). The SRP-DFs (or candidate SRP-DFs) that have been derived show transferability in many cases, i.e., they have been shown also to yield chemically accurate E_b for chemically related systems. This can in principle be exploited in simulating rates of catalyzed reactions on nano-particles containing facets and edges, as SRP-DFs may be transferable among systems in which a molecule dissociates on low index and stepped surfaces of the same metal. In many instances SRP-DFs have allowed important conclusions regarding the mechanisms underlying observed experimental trends. An important recent observation is that SRP-DFT based on semi-local exchange DFs has so far only been successful for systems for which the difference of the metal work function and the molecule's electron affinity exceeds 7 eV. A main challenge to SRP-DFT is to extend its applicability to the other systems, which involve a range of important DC reactions of e.g. O₂, H₂O, NH₃, CO₂, and CH₃OH. Recent calculations employing a PES based on a screened hybrid exchange functional suggest that the road to success may be based on using exchange functionals of this category.

Physisorbed State Regulates the Dissociation Mechanism of H2O on Ni(100)

Water dissociation is a key step in many industrial catalytic processes. The dissociation of H₂O on a rigid Ni(100) surface was investigated by the quantum instanton method with a full-dimensional potential energy surface. The calculated free-energy barrier maps showed that the free-energy barrier varied dramatically with the surface site. The free-energy well map demonstrated that the physisorption well of H₂O was existent at all of the surface sites, and H₂O could be dissociated by both the direct and steady-state processes. The calculated direct dissociation rate constants at different surface sites decreased rapidly in the order transition state (TS) > bridge > top > hollow. The steady-state dissociation rate constants had the same trend as that of the direct process but the steady-state dissociation rate constant at the top site became the largest at high temperatures. The direct dissociation rate constants were always larger than those of the steady-state process at a given temperature. The calculated kinetic isotope effects for the direct and steady-state processes were extremely large at low temperatures, which was caused by the zero-point energy correction and remarkable quantum tunneling. From low temperature to high temperature, H₂O would undergo stable molecular adsorption at the top site, steady-state dissociation at the TS site, direct rupture at the TS site, and direct decomposition at the impact site.

Ring Polymer Molecular Dynamics in Gas-Surface Reactions: Inclusion of Quantum Effects Made Simple

Accurately modeling gas-surface collision dynamics presents a great challenge for theory, especially in the low-energy (or temperature) regime where quantum effects are important. Here, a path integral-based nonequilibrium ring polymer molecular dynamics (NE-RPMD) approach is adapted to calculate dissociative initial sticking probabilities (S₀) of H₂ on Cu(111) and D₂O on Ni(111), revealing the distinct quantum nature in the two benchmark surface reactions. NE-RPMD successfully captures quantum tunneling in H₂ dissociation at very low energies, where the quasi-classical trajectory (QCT) method suddenly fails. Additionally, QCT substantially overestimates S₀ of D₂O because of severe zero point energy (ZPE) leakage, even at collision energies greater than the ZPE-corrected barrier. Instead, NE-RPMD predicts S₀ values of D₂O in much improved agreement with reference results obtained by the quantum wavepacket method with reasonable corrections of the thermal contribution. Our results suggest NE-RPMD as a promising approach to model quantum effects in gas-surface reactions.

Efficient Vibrational Energy Redistribution between Stretching Modes: State-to-State Quantum Scattering of H_{2}O from Cu(111)

State-to-state scattering dynamics of H_{2}O from Cu(111) has been studied by a fully coupled quantum mechanical model which explicitly accounts for the most important molecular degrees of freedom, based on a first-principles determined potential energy surface. When H_{2}O in its antisymmetric O-H stretching vibration (ν_{3}) collides with the surface, we find that the intramolecular vibrational energy redistribution (IVR) is predominant from ν_{3} to the symmetric stretching mode (ν_{1}), while rather inefficient to the bending mode (ν_{2}). This mode-specific IVR results from the strong couplings between stretching modes, which equally dispose the initial energy in ν_{3} into local stretching modes differing by a phase factor. Given the number of stretching modes in H_{2}O and CH_{4}, this mechanism naturally explains why the product ν_{1}/ν_{3} ratio calculated here is ∼3 times over that recently measured for CH_{4} scattering on Ni(111), suggesting that the nonstatistical IVR is more general than expected in polyatomic molecules.

Dynamics in reactions on metal surfaces: A theoretical perspective

Recent advances in theoretical characterization of reaction dynamics on metal surfaces are reviewed. It is shown that the widely available density functional theory of metals and their interactions with molecules have enabled first principles theoretical models for treating surface reaction dynamics. The new theoretical tools include methods to construct high-dimensional adiabatic potential energy surfaces, to characterize nonadiabatic processes within the electronic friction models, and to describe dynamics both quantum mechanically and classically. Three prototypical surface reactions, namely, dissociative chemisorption, Eley-Rideal reactions, and recombinative desorption, are surveyed with a focus on some representative examples. While principles governing gas phase reaction dynamics may still be applicable, the presence of the surface introduces a higher level of complexity due to strong interaction between the molecular species and metal substrate. Furthermore, most of these reactive processes are impacted by energy exchange with surface phonons and/or electron-hole pair excitations. These theoretical studies help to interpret and rationalize experimental observations and, in some cases, guide experimental explorations. Knowledge acquired in these fundamental studies is expected to impact many practical problems in a wide range of interfacial processes.

Vibrational control of selective bond cleavage in dissociative chemisorption of methanol on Cu(111)

Controlling product branching ratios in a chemical reaction represents a desired but difficult achievement in chemistry. In this work, we demonstrate the first example of altering the branching ratios in a multichannel reaction, i.e., methanol dissociative chemisorption on Cu(111), via selectively exciting specific vibrational modes. To this end, we develop a globally accurate full-dimensional potential energy surface for the CH3OH/Cu(111) system and perform extensive vibrational state-selected molecular dynamics simulations. Our results show that O-H/C-H/C-O stretching vibrational excitations substantially enhance the respective bond scission processes, representing extraordinary bond selectivity. At a given total energy, the branching ratio of C-O/C-H dissociation can increase by as large as 100 times by exciting the C-O stretching mode which possesses an unprecedentedly strong vibrational efficacy on reactivity. This vibrational control can be realized by the well-designed experiment using a linearly polarized laser.

Water dissociating on rigid Ni(100): A quantum dynamics study on a full-dimensional potential energy surface

We constructed a nine-dimensional (9D) potential energy surface (PES) for the dissociative chemisorption of H₂O on a rigid Ni(100) surface using the neural network method based on roughly 110 000 energies obtained from extensive density functional theory (DFT) calculations. The resulting PES is accurate and smooth, based on the small fitting errors and the good agreement between the fitted PES and the direct DFT calculations. Time dependent wave packet calculations also showed that the PES is very well converged with respect to the fitting procedure. The dissociation probabilities of H₂O initially in the ground rovibrational state from 9D quantum dynamics calculations are quite different from the site-specific results from the seven-dimensional (7D) calculations, indicating the importance of full-dimensional quantum dynamics to quantitatively characterize this gas-surface reaction. It is found that the validity of the site-averaging approximation with exact potential holds well, where the site-averaging dissociation probability over 15 fixed impact sites obtained from 7D quantum dynamics calculations can accurately approximate the 9D dissociation probability for H₂O in the ground rovibrational state.