A catalytic highly enantioselective allene approach to oxazolines

Recent advances in Pd-catalyzed asymmetric cyclization reactions

Over the past few decades, there have been major developments in transition metal-catalyzed asymmetric cyclization reactions, enabling the convenient access to a wide spectrum of structurally diverse chiral carbo- and hetero-cycles, common skeletons found in fine chemicals, natural products, pharmaceuticals, agrochemicals, and materials. In particular, a plethora of enantioselective cyclization reactions have been promoted by chiral palladium catalysts owing to their outstanding features. This review aims to collect the latest advancements in enantioselective palladium-catalyzed cyclization reactions over the past eleven years, and it is organized into thirteen sections depending on the different types of transformations involved.

Pd-Catalyzed Asymmetric Three-Component Allenol Carbopalladation and Allylic Cycloaddition Cascade: A Route to Functionalized Tetrahydrofurans

The first Pd-catalyzed asymmetric three-component reaction of 2,3-allenol, aryl iodides, and 2-arylmethylenemolononitriles has been developed via an allenol carbopalladation and an allylic cycloaddition cascade. This process allows rapid access to substituted tetrahydrofurans bearing diverse functional groups in good yields with high diastereoselectivities and excellent enantioselectivities. The concise total synthesis of a lignan, (-)-2-episesaminone, has been achieved by the elaboration of a functionalized tetrahydrofuran obtained from this reaction.

Phosphorus-Based Organocatalysis for the Dehydrative Cyclization of N-(2-Hydroxyethyl)amides into 2-Oxazolines

A metal-free, biomimetic catalytic protocol for the cyclization of N-(2-hydroxyethyl)amides to the corresponding 2-oxazolines (4,5-dihydrooxazoles), promoted by the 1,3,5,2,4,6-triazatriphosphorine (TAP)-derived organocatalyst tris(o-phenylenedioxy)cyclotriphosphazene (TAP-1) has been developed. This approach requires less precatalyst compared to the reported relevant systems, with respect to the phosphorus atom (the maximum turnover number (TON) ∼ 30), and exhibits a broader substrate scope and higher functional-group tolerance, providing the functionalized 2-oxazolines with retention of the configuration at the C(4) stereogenic center of the 2-oxazolines. Widely accessible β-amino alcohols can be used in this approach, and the cyclization of N-(2-hydroxyethyl)amides provides the desired 2-oxazolines in up to 99% yield. The mechanism of the reaction was studied by monitoring the reaction using spectral and analytical methods, whereby an ¹⁸O-labeling experiment furnished valuable insights. The initial step involves a stoichiometric reaction between the substrate and TAP-1, which leads to the in situ generation of the catalyst, a catechol cyclic phosphate, as well as to a pyrocatechol phosphate and two possible active intermediates. The dehydrative cyclization was also successfully conducted on the gram scale.

Visible light bromide catalysis for oxazoline, pyrrolidine, and dihydrooxazine syntheses via Csp3-H functionalizations

A catalytic benzylic C_sp³-H functionalization protocol is described here. This visible light-mediated process is centered on the utilization of a bromide catalyst and oxidant to generate a nitrogen (N)-centered radical for a site-selective hydrogen atom transfer (HAT) process. This strategy enabled the unconventional syntheses of a number of N-heterocycles dependent on the amide identity. We also discovered a nucleophilicity-dependent kinetic resolution for stereochemical differentiation of C_sp³-H bonds that enabled the stereoselective synthesis of cis- and trans-oxazolines.

Deciphering the Chameleonic Chemistry of Allenols: Breaking the Taboo of a Onetime Esoteric Functionality

The allene functionality has participated in one of the most exciting voyages in organic chemistry, from chemical curiosities to a recurring building block in modern organic chemistry. In the last decades, a special kind of allene, namely, allenol, has emerged. Allenols, formed by an allene moiety and a hydroxyl functional group with diverse connectivity, have become common building blocks for the synthesis of a wide range of structures and frequent motif in naturally occurring systems. The synergistic effect of the allene and hydroxyl functional groups enables allenols to be considered as a unique and sole functionality exhibiting a special reactivity. This Review summarizes the most significant contributions to the chemistry of allenols that appeared during the past decade, with emphasis on their synthesis, reactivity, and occurrence in natural products.

A Facile Microwave-Assisted Synthesis of Oxazoles and Diastereoselective Oxazolines Using Aryl-Aldehydes, p-Toluenesulfonylmethyl Isocyanide under Controlled Basic Conditions

In this study, a highly efficient two-component [3 + 2] cycloaddition reaction of substituted aryl aldehydes with 4-toluenesulfonylmethyl isocyanide (TosMIC) in the presence of 2 equiv of potassium phosphate as a base to 5-substituted oxazoles were established in a isopropanol medium under microwave irradiation. However, using 1 equiv of K3PO4 as a base resulted in the diastereoselective synthesis of 4,5-disubstituted oxazolines under identical reaction conditions. The foremost benefits of these protocols are the moderate-to-excellent yields with good functional group compatibility, simple experimental procedure, inexpensive readily available starting materials, nonchromatographic purification, and high bond-forming efficiency. The synthetic manipulation reported herein represents a cleaner route to the sustainable preparation of 5-substituted oxazoles and diastereoselective 4,5-disubstituted oxazolines derivatives.

Copper-Catalyzed Enantioselective Synthesis of Oxazolines from Aminotriols via Asymmetric Desymmetrization

A copper-catalyzed enantioselective transformation of tris(hydroxymethyl)aminomethane-derived aminotriols was developed to provide multisubstituted oxazolines with a tetrasubstituted carbon center. The present transformation consisted of sequential reactions involving mono-sulfonylation of aminotriols, subsequent intramolecular cyclization to afford prochiral oxazoline diols, and sulfonylative asymmetric desymmetrization of resultant oxazoline diols. In addition, the kinetic resolution process would be involved in the sulfonylative asymmetric desymmetrization step, which would amplify the enantiopurities of the desired products. Various aminotriols were tolerated in the present reaction, affording the desired oxazolines in good to high yields with excellent enantioselectivities. The synthetic utility of the present reaction was demonstrated by the transformation of the optically active oxazoline into a chiral α-tertiary amine motif.

Asymmetric synthesis of allylic compounds via hydrofunctionalisation and difunctionalisation of dienes, allenes, and alkynes

This review article provides an overview of progress in asymmetric synthesis of allylic compounds via hydrofunctionalisation and difunctionalisation of dienes, allenes, and alkynes.

A mild catalytic synthesis of 2-oxazolines via oxetane ring-opening: rapid access to a diverse family of natural products

A new catalytic protocol for the expedient synthesis of oxazolines from oxetanes is developed.

A new catalytic protocol for the expedient synthesis of oxazolines from oxetanes is disclosed. This mild process complements the conventional oxazoline synthesis based on non-catalytic cyclization of β-hydroxy or unsaturated amides. It is also a new addition to the reactivity profile of oxetanes leading to heterocycles. In the presence of In(OTf)₃, various 3-amido oxetanes underwent smooth intramolecular cyclization to form the corresponding 2-oxazolines, including some valuable oxazoline-based bidentate ligands. This protocol also provides rapid access to various natural products and antibacterial molecules.

Allenation of Terminal Alkynes with Aldehydes and Ketones

So far, over 150 natural products and pharmaceuticals containing an allene moiety have been identified. During the last two decades, allenes have also been demonstrated as synthetically versatile starting materials in organic synthesis. In comparison to alkenes and alkynes, allenes are unique unsaturated hydrocarbons due to their axial chirality, which could be transformed to central chirality via chirality transfer to provide an irreplaceable entry to chiral molecules. Thus, methods for allene synthesis from readily available chemicals are of great interest. In 1979, Crabbé et al. reported the first CuBr-mediated allenation of terminal alkynes (ATA) reaction to form monosubstituted allenes from 1-alkynes and paraformaldehyde in the presence of diisopropylamine. During the following 30 years, the ATA reactions were limited to paraformaldehyde. This Account describes our efforts toward the development of ATA reactions in the last ten years. First, we improved the yields and scope greatly for the synthesis of monosubstituted allenes by modifying the original Crabbé recipe. Next we developed the ZnI₂-promoted or CuI-catalyzed ATA reactions for the synthesis of 1,3-disubstituted allenes from terminal alkyne and normal aldehydes. Furthermore, we first realized the CdI₂-promoted ATA reaction of ketones with pyrrolidine as the matched amine for the preparation of trisubstituted allenes. Due to the toxicity of CdI₂, we also developed two alternative approaches utilizing CuBr/ZnI₂ or CuI/ZnBr₂/Ti(OEt)₄. The asymmetric version of ATA reactions for the synthesis of optically active 1,3-disubstituted allenes has also been achieved in this group with two strategies. One is called "chiral ligand" strategy, using terminal alkynes, aldehydes, and nonchiral amine with the assistance of a proper chiral ligand. The other is the "chiral amine" strategy, applying terminal alkynes, aldehydes, and chiral amines such as ( S)- or ( R)-α,α-diphenylprolinol or ( S)- or ( R)-α,α-dimethylprolinol. Optically active 1,3-disubstituted allenes containing different synthetically useful functionalities such as alcohol, amide, sulfamide, malonate, carboxylate, and carbohydrate units could be prepared without protection with the newly developed CuBr₂-catalyzed chiral amine strategy. Recently, we have applied these enantioselective allenation of terminal alkyne (EATA) reactions to the syntheses of some natural allenes such as laballenic acid, insect pheromone, methyl ( R)-8-hydroxyocta-5,6-dienoate, phlomic acid, and lamenallenic acid, as well as some non-allene natural γ-butyrolactones such as xestospongienes (E, F, G, and H), ( R)-4-tetradecalactone, ( S)-4-tetradecalactone, ( R)-γ-palmitolactone, and ( R)-4-decalactone.

Efficient Synthesis of the N-(buta-2,3-dienyl)carboxamide of Isopimaric Acid and the Potential of This Compound towards Heterocyclic Derivatives of Diterpenoids

The N‐(2,3‐butadienyl)carboxamide of isopimaric acid, that is, compound 3, was prepared through a two‐step synthetic procedure starting from the natural diterpene isopimaric acid. The Pd‐catalyzed cross‐coupling and subsequent cyclization of terpenoid allene 3 with several aryl iodides and aryl bromides gave access to optically active diterpenoid–oxazoline derivatives in good to excellent yields. The functional group tolerance in the aryl iodides was demonstrated by several examples, including substrates with additional N‐tert‐butoxycarbonyl‐protected amino, hydroxy, and carboxy substituents in the ortho position. The cross‐coupling–cyclization reaction of those compounds with allene 3 proceeded selectively with the formation of cyclization products on the substituent in the aromatic ring. This transformation opens a potential route to the synthesis of hybrid compounds containing a tricyclic diterpenoid and several heterocycles.