A general method for the metal-free, regioselective, remote C-H halogenation of 8-substituted quinolines

Phase-Transfer Catalysis for Electrochemical Chlorination and Nitration of Arenes

A biphasic anodic oxidation method for aromatic halogenation process was developed, where aqueous metal salts were directly used as halogen source. Ammonium salts serve as both electrolytes and phase transfer catalysis to facilitate anion transport and oxidative transformation. This design allows for chlorination or nitration of multiple types of arenes using NaCl or KNO2.

Catalytic utility of PNN-based MnI pincer complexes in the synthesis of quinolines and transfer hydrogenation of carbonyl derivatives

This manuscript describes the synthesis of a triazolyl-pyridine-based phosphine, N-((diphenylphosphaneyl)methyl)-N-methyl-6-(1-phenyl-1H-1,2,3-triazol-4-yl)pyridin-2-amine, [2,6-{(PPh2)CH2N(Me)(C5H3N)(C2HN3C6H5)}] (1) (here onwards referred to as PNN) and its cationic and neutral MnI complexes and catalytic applications. The reaction of 1 with Mn(CO)5Br afforded a cationic complex [Mn(CO)3(PNN)]Br (2), which is highly stable in solid state, but in solution it gradually loses one of the CO groups to form a neutral complex [Mn(CO)2(PNN)Br] (3). Complex 2 on treatment with AgBF4 also yielded a cationic complex [Mn(CO)3(PNN)]BF4 (4). These complexes efficiently promoted the synthesis of quinoline derivatives via acceptor-less dehydrogenative coupling of 2-aminobenzyl alcohol and ketones, with complex 3 showing the highest activity with a very low catalyst loading (0.03 mol%) at 110 °C. Complex 3 (0.5 mol%) also showed excellent catalytic activity in the transfer hydrogenation of ketones and aldehydes to form respective secondary and primary alcohols.

Copper-promoted C5-selective bromination of 8-aminoquinoline amides with alkyl bromides

An efficient and practical method for the synthesis of C5-brominated 8-aminoquinoline amides via a copper-promoted selective bromination of 8-aminoquinoline amides with alkyl bromides was developed. The reaction proceeds smoothly in dimethyl sulfoxide (DMSO) under air, employing activated and unactivated alkyl bromides as the halogenation reagents without additional external oxidants. This method features outstanding site selectivity, broad substrate scope, and excellent yields.

Triphosgene and Triphenylphosphine Oxide-Mediated Cascade Heterocyclization of N-Acylated Anilines: One-Pot Synthesis of 2,4-Dichloroquinolines

A one-pot cascade chlorination/heterocyclization strategy has been developed for the synthesis of 2,4-dichloro-substituted quinolines from acylated anilines using triphosgene and triphenylphosphine oxide. Obviating the conventional harsh conditions of chlorination, synthetic useful quinolines with moderate to good yields were obtained through this reaction. The mechanism study exhibited that the formation of a β-enamine intermediate plays a vital role in the generation of the final product.

Exploring the antioxidant, antimicrobial, cytotoxic and biothermodynamic properties of novel morpholine derivative bioactive Mn(ii), Co(ii) and Ni(ii) complexes - combined experimental and theoretical measurements towards DNA/BSA/SARS-CoV-2 3CLPro

A novel class of bioactive complexes (1-3) [MII(L)2(bpy)], where, L = 2-(4-morpholinobenzylideneamino)phenol, bpy = 2,2'-bipyridine, MII = Mn (1), Co (2) or Ni (3), were assigned to octahedral geometry based on analytical and spectral measurements. Gel electrophoresis showed that complex (2) demonstrated significant DNA cleavage activity compared to the other complexes under the action of oxidation agent (H2O2). The DNA binding constant properties measured by various techniques were in the following sequence: (2) > (3) > (1) > (HL), which suggests that the complexes might intercalate DNA, a possibility that is also supported by their biothermodynamic characteristics. The binding constant results for BSA from electronic absorption and fluorometric titrations demonstrate that complex (2) exhibits the highest binding effectiveness among them all, which means that all the compounds could interact with BSA through a static approach, additionally supported by FRET measurements. DFT and docking calculations were employed to realize the electronic structure, reactivity, and interaction capability of all substances with DNA, BSA, and the SARS-CoV-2 main protease. These binding energies fell within the ranges -7.7 to -8.5, -8.2 to -10.1 and -6.7 to -9.3 kcal mol-1, respectively. The higher reactivity of the complexes than the ligand is supported by FMO theory. The in vitro antibacterial, cytotoxicity, and radical scavenging characteristics revealed that complexes (2-3) have better biological efficacy than the others. The cytotoxicity and binding properties also show good correlation with the partition coefficient (log P), which is encouraging because all of the experimental findings are closely correlated with the theoretical measurements.

Study of Cyclohexane and Methylcyclohexane Functionalization Promoted by Manganese(III) Compounds

Alkane functionalization using safe and low-energy processes is of great interest to industry and academia. Aiming to contribute to the process of saturated hydrocarbon functionalization, we have studied a set of three manganese(III) complexes as catalysts for promoting the oxidation of saturated hydrocarbons (cyclohexane and methylcyclohexane) in the presence of hydrogen peroxide or trichloroisocyanuric acid (TCCA). The mononuclear manganese(III) compounds were prepared using the ligands H2LMet4 (6,6’-((1,4-diazepane-1,4-diyl)bis(methylene))bis(2,4-dimethylphenol), H2salen (2,2’-((1E,1’E)-(ethane-1,2-diylbis(azaneylylidene))bis(methaneylylidene))diphenol) and H2salan (2,2’-((ethane-1,2-diylbis(azanediyl))bis(methylene))diphenol). The catalytic processes were carried out in acetonitrile at 25 and 50 °C for 24 h. The increase in the temperature was important to get a better conversion. The compounds did not promote cyclohexane oxidation in the presence of H2O2. However, they were active in the presence of TCCA, employing a ratio of 1000:333:1 equivalents of the substrate:TCCA:catalyst. The best catalytic activity was shown by the compound [Mn(salen)Cl], reaching conversions of 14.5 ± 0.3% (25 °C) and 26.3 ± 1.1% (50 °C) (yield for chlorocyclohexane) and up to 12.1 ± 0.5% (25 °C) and 29.8 ± 2.2% (50 °C) (total yield for the mixture of the products 1-chloro-4-methylcyclohexane, 3-methylcyclohexene and 1-methylcyclohexene). The interaction of the catalysts with TCCA was studied using electron paramagnetic resonance (EPR), suggesting that the catalysts [Mn(LMet4)Cl] and [Mn(salan)Cl] act via a different mechanism from that observed for [Mn(salen)Cl].

Novel NHC-Based Au(I) Complexes as Precursors of Highly Pure Au(0) Nuggets under Oxidative Conditions

The Lewis-acidic character and robustness of NHC-Au(I) complexes enable them to catalyze a large number of reactions, and they are enthroned as the catalysts of choice for many transformations among polyunsaturated substrates. More recently, Au(I)/Au(III) catalysis has been explored either by utilizing external oxidants or by seeking oxidative addition processes with catalysts featuring pendant coordinating groups. Herein, we describe the synthesis and characterization of N-heterocyclic carbene (NHC)-based Au(I) complexes, with and without pendant coordinating groups, and their reactivity in the presence of different oxidants. We demonstrate that when using iodosylbenzene-type oxidants, the NHC ligand undergoes oxidation to afford the corresponding NHC=O azolone products concomitantly with quantitative gold recovery in the form of Au(0) nuggets ~0.5 mm in size. The latter were characterized by SEM and EDX-SEM showing purities above 90%. This study shows that NHC-Au complexes can follow decomposition pathways under certain experimental conditions, thus challenging the believed robustness of the NHC-Au bond and providing a novel methodology to produce Au(0) nuggets.

Novel Bromo and methoxy substituted Schiff base complexes of Mn(II), Fe(III), and Cr(III) for anticancer, antimicrobial, docking, and ADMET studies

In this study, four new Mn(II), Fe(III), and Cr(III) complexes with two Schiff base ligands namely, 4-bromo-2-[(E)-{[4-(2-hydroxyethyl)phenyl]imino}methyl]phenol (HL1) and 2-[(E)-{[4-(2-hydroxyethyl)phenyl]imino}methyl]-4-methoxy phenol (HL2) have been synthesized and characterized. Different analytical and spectral methods have been used to characterize the ligands and their complexes. General formulas of [M(L)Cl₂(H₂O)₂] for FeL1, CrL1 and CrL2, and [M(L)Cl(H₂O)₃] for MnL2 were proposed. HOMO and LUMO energies, as well as the electrical characteristics, have been calculated using DFT/B3LYP calculations with Gaussian 09 program. The optimized lowest energy configurations of the complexes are proven. The disc diffusion technique was used to test the pharmacological activities' antibacterial efficacy against diverse bacterial and fungus species. The MTT technique was used to assess the in vitro cytotoxicity of the ligands and their metal complexes on the Hep-G2 human liver carcinoma cell line and the MCF-7 human breast cancer cell line. All compounds displayed better activity compared to the free ligands. MnL2 complex showed predominant activity when compared to the other complexes with an IC₅₀ value of 2.6 ± 0.11 μg/ml against Hep-G2, and against MCF-7 the IC₅₀ value was 3.0 ± 0.2 μg/ml which is less than the standard drug cisplatin (4.0 μg/ml). UV-vis electronic spectrum and gel electrophoresis techniques have been used to investigate the compounds' affinity to bind and cleavage CT-DNA. The interaction's binding constants, or Kb, have been identified, and it was discovered that the new complexes' binding affinities are in the order of FeL1 > MnL2 > CrL2 > CrL1, and the binding mechanism has been suggested. To assess the kind of binding and binding affinity of the investigated drugs with human DNA, a molecular docking study was carried out (PDB:1bna). The acquired results supported the intercalation binding mechanism proposed in the experimental part and revealed that complexes may be inserted into the DNA molecule to stop DNA replication. According to ADMET data, the synthesized compounds have a high bioavailability profile and their physicochemical and pharmacological features remained within Lipinski's RO5 predicted limitations.

Copper-catalyzed selective C5-H bromination and difluoromethylation of 8-aminoquinoline amides using ethyl bromodifluoroacetate as the bifunctional reagent

A simple and effective method for the copper-catalyzed selective C5-H bromination and difluoromethylation of 8-aminoquinoline amides with ethyl bromodifluoroacetate as the bifunctional reagent was developed. The combination of cupric catalyst and alkaline additive results in a C5-bromination reaction, whereas cuprous catalyst combined with silver additive results in the C5-difluoromethylation reaction. This method has a broad substrate scope and allows for easy and convenient access to desired C5-functionalized quinolones with good to excellent yields.

An Integrated Analysis of Mechanistic Insights into Biomolecular Interactions and Molecular Dynamics of Bio-Inspired Cu(II) and Zn(II) Complexes towards DNA/BSA/SARS-CoV-2 3CLpro by Molecular Docking-Based Virtual Screening and FRET Detection

Novel constructed bioactive mixed-ligand complexes (1b) [Cu^II(L)₂(phen)] and (2b) [Zn^II(L)₂(phen)] {where, L = 2-(4-morpholinobenzylideneamino)phenol), phen = 1,10-phenanthroline} have been structurally analysed by various analytical and spectroscopic techniques, including, magnetic moments, thermogravimetric analysis, and X-ray crystallography. Various analytical and spectral measurements assigned showed that all complexes appear to have an octahedral geometry. Agar gel electrophoresis's output demonstrated that the Cu(II) complex (1b) had efficient deoxyribonucleic cleavage and complex (2b) demonstrated the partial cleavage accomplished with an oxidation agent, which generates spreadable OH^● through the Fenton type mechanism. The DNA binding constants observed from viscosity, UV-Vis spectral, fluorometric, and electrochemical titrations were in the following sequence: (1b) > (2b) > (HL), which suggests that the complexes (1b-2b) might intercalate DNA, a possibility that is supported by the biothermodynamic measurements. In addition, the observed binding constant results of BSA by electronic absorption and fluorometric titrations indicate that complex (1b) revealed the best binding efficacy as compared to complex (2b) and free ligand. Interestingly, all compounds are found to interact with BSA through a static approach, as further attested by FRET detection. The DFT and molecular docking calculations were also performed to realize the electronic structure, reactivity, and binding capability of all test samples with CT-DNA, BSA, and the SARS-CoV-2 3CL^Pro, which revealed the binding energies were in a range of -8.1 to -8.9, -7.5 to -10.5 and -6.7--8.8 kcal/mol, respectively. The higher reactivity of the complexes than the free ligand is supported by the FMO theory. Among all the observed data for antioxidant properties against DPPH^᛫, ^᛫OH, O₂^-• and NO^᛫ free radicals, complex (1a) had the best biological efficacy. The antimicrobial and cytotoxic characteristics of all test compounds have been studied by screening against certain selected microorganisms as well as against A549, HepG2, MCF-7, and NHDF cell lines, respectively. The observed findings revealed that the activity enhances coordination as compared to free ligand via Overtone's and Tweedy's chelation mechanisms. This is especially encouraging given that in every case, the experimental findings and theoretical detections were in perfect accord.

Comprehensive Assessment of Biomolecular Interactions of Morpholine-Based Mixed Ligand Cu(II) and Zn(II) Complexes of 2,2'-Bipyridine as Potential Anticancer and SARS-CoV-2 Agents: A Synergistic Experimental and Structure-Based Virtual Screening

A new class of pharmacologically active mixed-ligand complexes (1a-2a) [M^II(L)₂ (bpy)], where L = 2-(4-morpholinobenzylideneamino)phenol), bpy = 2,2'-bipyridine, M^II = Cu (1a), and Zn (2a), were assigned an octahedral geometry by analytical and spectral measurements. Gel electrophoresis showed that complex (1a) demonstrated the complete DNA cleavage mediated by H₂O₂. The overall DNA-binding constants observed from UV-vis, fluorometric, hydrodynamic, and electrochemical titrations were in the following sequence: (1a) > (2a) > (HL), which suggests that the complexes might intercalate DNA, a possibility that is further supported by the biothermodynamic characteristics. The binding constant results of BSA by electronic absorption and fluorometric titration demonstrate that complex (1a) exhibits the highest binding effectiveness among others, which means that all compounds could interact with BSA through a static approach, additionally supported by FRET measurements. Density FunctionalTheory (DFT) and molecular docking calculations were relied on to unveil the electronic structure, reactivity, and interacting capability of all substances with DNA, BSA, and SARS-CoV-2 main protease (Mpro). These observed binding energies fell within the following ranges: -7.7 to -8.6, -7.2 to -10.2, and -6.7 to -8.2 kcal/mol, respectively. The higher reactivity of the complexes compared to free ligand is supported by the Frontier MolecularOrbital (FMO) theory. The in vitro antibacterial, cytotoxic, and radical scavenging characteristics revealed that complex (1a) has the best biological efficacy compared to others. This is encouraged because all experimental findings are closely correlated with the theoretical measurements.

Practical Synthesis of B(9)-Halogenated Carboranes with N-Haloamides in Hexafluoroisopropanol

The B(9)-H halogenation of o-carborane and m-carborane was achieved with excellent selectivities in hexafluoroisopropanol (HFIP) under simple reaction conditions: single reagent [trichloroisocyanuric acid (TCCA), tribromoisocyanuric acid (TBCA) or N-iodosuccinimide (NIS)], catalyst-free, air-/moisture-tolerant, and convenient work-up. With this method, a variety of 9-halogenated o-carboranes and m-carboranes were obtained in good to excellent yields with broad tolerance of functional groups.

Photoinduced Metal-Free Borylation of Aryl Halides Catalysed by in situ Formed Donor-Acceptor Complex

Organoboron compounds are very important building blocks which can be applied in medicinal, biological and industrial fields. However, direct borylation in a metal free manner has been very rarely reported. Herein, we described the successful direct borylation of haloarenes under mild, operationally simple, catalyst-free conditions, promoted by irradiation with visible light. Mechanistic experiments and computational investigations indicate the formation of an excited donor–acceptor complex with a −3.12 V reduction potential, which is a highly active reductant and can facilitate single-electron-transfer (SET) with aryl halides to produce aryl radical intermediates. A two-step one-pot method was developed for site selective aromatic C–H bond borylation. The protocol's good functional group tolerance enables the functionalization of a variety of biologically relevant compounds, representing a new application of aryl radicals merged with photochemistry.

We reported a facile metal-free conversion of aryl halides to the corresponding boronic esters catalysed by an in situ formed donor–acceptor complex. A two-step one-pot method was also developed for site selective aromatic C–H bond borylation.

Remote Selective Decarboxylative Difluoroarylmethylation of 8-Aminoquinolines under Transition Metal-Free Conditions

A facile transition metal-free decarboxylative C4 selective C-H difluoroarylmethylation of 8-aminoquinolines has been developed. This strategy proceeds under simple aqueous conditions and displays a broad substrate scope and excellent functional...

A New Series of 1,3,4-Oxadiazole Linked Quinolinyl-Pyrazole/Isoxazole Derivatives: Synthesis and Biological Activity Evaluation

A series of 1,3,4-oxadiazole bridged pyrazole/isoxazole bearing quinoline derivatives has been designed and synthesized by a clean and convenient method. Structures of the newly synthesized compounds have been confirmed by FTIR, 1H and 13C NMR, and HRMS spectral data. The titled compounds have been evaluated for their molecular docking guided antimicrobial and anti-inflammatory activity. One of 1,3,4-oxadiazole bridged quinolinyl-pyrazole derivatives has interacted efficiently with E. Coli protein (PDB file: 1KZN), and has been characterized by good antimicrobial activity against the majority of the tested pathogens. Another product has exhibited excellent anti-inflammatory activity.

Metal-free C8-H functionalization of quinoline N-oxides with ynamides

The metal-free C8-H functionalization of quinoline N-oxides with ynamides is unveiled for the first time by the intramolecular Friedel-Crafts-type reaction of quinolyl enolonium intermediates generated from Brønsted acid-catalyzed addition of quinoline N-oxides to ynamides. Various quinoline N-oxides and terminal ynamides prove to be suitable substrates for this method. A one-pot protocol was then developed for the metal-free direct C8-H functionalization of quinolines.

C-5 selective chlorination of 8-aminoquinoline amides using dichloromethane

An oxidant-free electrochemical regioselective chlorination of 8-aminoquinoline amides at ambient temperature in batch and continuous-flow was achieved. Inert DCM was used as the chlorinating reagent. Owing to the continuous-flow setup, the reaction scale up can be achieved conveniently with higher productivity. Moreover, this method has good position-control, and water and air tolerance. Costly quaternary ammonium salts were avoided. Radical-trapping, H/D exchange, KIE and cyclic voltammetry experiments were conducted to gain insight into the reaction mechanism.

Recent advances in the synthesis of organic chloramines and their insights into health care

Organic nitrogen–chlorine compounds and their derivatives are important heterocyclic motifs, exhibiting applications such as N-chlorinating agents, analytical reagents, disinfectants, antipathogens, and as synthetic intermediates for drugs, polymers, and natural products.

Recent developments in the synthesis of azaindoles from pyridine and pyrrole building blocks

The azaindole framework is ubiquitous in bioactive natural products and pharmaceuticals. This review highlights the synthetic approaches to azaindoles with advantages and limitations, mechanistic pathways and biological importance.

Metal-free regioselective C5-cyanoalkylation of the 8-aminoquinolineamides/sulfonamides via oxidative cross-dehydrogenative coupling with alkylnitriles

A practical, versatile and Metal-free regioselective C5-cyanoalkylation of the 8-aminoquinolineamides/sulfonamides with acetonitrile has been described.

Synthesis and Photophysical Properties of a Series of Dimeric Indium Quinolinates

A novel class of quinolinol-based dimeric indium complexes (1-6) was synthesized and characterized using ¹H and ¹³C(¹H) NMR spectroscopy and elemental analysis. Compounds 1-6 exhibited typical low-energy absorption bands assignable to quinolinol-centered π-π* charge transfer (CT) transition. The emission spectra of 1-6 exhibited slight bathochromic shifts with increasing solvent polarity (p-xylene < tetrahydrofuran (THF) < dichloromethane (DCM)). The emission bands also showed a gradual redshift, with an increase in the electron-donating effect of substituents at the C5 position of the quinoline groups. The absolute emission quantum yields (Φ_PL) of compounds 1 (11.2% in THF and 17.2% in film) and 4 (17.8% in THF and 36.2% in film) with methyl substituents at the C5 position of the quinoline moieties were higher than those of the indium complexes with other substituents.

Three-component ruthenium-catalyzed remote C-H functionalization of 8-aminoquinoline amides

Multicomponent reactions can efficiently construct complex molecular structures from simple precursors. Herein, a novel ruthenium-catalyzed three-component highly selective remote C-H functionalization of 8-aminoquinoline amides has been described. The reaction tolerates a wide range of functional groups, producing arylation/difluoroalkylation products of olefins with potential biological activity and pharmaceutical value. Radical scavenging and radical clock experiments show that a free radical process is involved and a H/D exchange experiment suggests that the reaction might involve ortho-C-H activation of the aromatic ring. A possible mechanism is proposed.

Transition-Metal-Free Site-Selective γ-C(sp2)-H Monoiodination of Arenes Directed by an Aliphatic Keto Group

A general γ-C(sp²)-H iodination method directed by an aliphatic keto group has been developed under transition-metal-free conditions for the first time, generating iodoarenes in good to excellent yields with excellent site selectivity. This protocol features a wide range of aryl-substituted ketones, short reaction times, mild reaction conditions, and scalable synthetic procedures. A possible reaction mechanism was also proposed based on several control experiments.

Preparation and Uses of Chlorinated Glycerol Derivatives

Crude glycerol (C3H8O3) is a major by-product of biodiesel production from vegetable oils and animal fats. The increased biodiesel production in the last two decades has forced glycerol production up and prices down. However, crude glycerol from biodiesel production is not of adequate purity for industrial uses, including food, cosmetics and pharmaceuticals. The purification process of crude glycerol to reach the quality standards required by industry is expensive and dificult. Novel uses for crude glycerol can reduce the price of biodiesel and make it an economical alternative to diesel. Moreover, novel uses may improve environmental impact, since crude glycerol disposal is expensive and dificult. Glycerol is a versatile molecule with many potential applications in fermentation processes and synthetic chemistry. It serves as a glucose substitute in microbial growth media and as a precursor in the synthesis of a number of commercial intermediates or fine chemicals. Chlorinated derivatives of glycerol are an important class of such chemicals. The main focus of this review is the conversion of glycerol to chlorinated derivatives, such as epichlorohydrin and chlorohydrins, and their further use in the synthesis of additional downstream products. Downstream products include non-cyclic compounds with allyl, nitrile, azide and other functional groups, as well as oxazolidinones and triazoles, which are cyclic compounds derived from ephichlorohydrin and chlorohydrins. The polymers and ionic liquids, which use glycerol as an initial building block, are highlighted, as well.

A review on quinoline derivatives as anti-methicillin resistant Staphylococcus aureus (MRSA) agents

Methicillin Resistant Staphylococcus aureus (MRSA) consists of strains of S. aureus which are resistant to methicillin. The resistance is due to the acquisition of mecA gene which encodes PBP2a unlike of any PBPs normally produced by S. aureus. PBP2a shows unusually low β-Lactam affinity and remains active to allow cell wall synthesis at normally lethal β-Lactam concentrations. MRSA can cause different types of infections like Healthcare associated MRSA, Community associated MRSA and Livestock associated MRSA infections. It causes skin lesions, osteomyelitis, endocarditis and furunculosis. To treat MRSA infections, only a few options are available like vancomycin, clindamycin, co-trimoxazole, fluoroquinolones or minocycline and there is a dire need of discovering new antibacterial agents that can effectively treat MRSA infections. In the current review, an attempt has been made to compile the data of quinoline derivatives possessing anti-MRSA potential reported to date.

Differential formation of nitrogen-centered radicals leading to unprecedented, regioselective bromination of N,N′-(1,2-phenylene)bisamides and 2-amidophenols

A highly efficient, site-selective, visible light-accelerated, remote C–H halogenation of unsymmetrical aromatic bisamides/amidoesters has been developed.

Indole bearing thiadiazole analogs: synthesis, β-glucuronidase inhibition and molecular docking study

Indole based thiadiazole derivatives (1-22) have synthesized, characterized by NMR and HREI-MS and evaluated for β-Glucuronidase inhibition. All compounds showed outstanding β-glucuronidase activity with IC50 values ranging between 0.5 ± 0.08 to 38.9 ± 0.8 µM when compared with standard d-saccharic acid 1,4 lactone (IC50 value of 48.1 ± 1.2 µM). The compound 6, a 2,3-dihydroxy analog was found the most potent among the series with IC50 value 0.5 ± 0.08 µM. Structure activity relationship has been established for all compounds. To confirm the binding interactions of these newly synthesized compounds, molecular docking study have been carried out which reveal that these compounds established stronger hydrogen bonding networks with active site residues.

Iron-Catalyzed Regioselective Remote C(sp2)-H Carboxylation of Naphthyl and Quinoline Amides

Iron(III)-catalyzed regioselective direct remote C-H carboxylation of naphthyl and quinoline amides was developed using CBr₄ and alcohol. The reaction involves a radical pathway using a coordination activation strategy and single electron transfer process. The use of sustainable iron catalysis, selectivity, and the substrate scope are the important practical features.