Variations in the fuel structure control the rate of the back and forth motions of a chemically fuelled molecular switch

Transient Covalent Polymers through Carbodiimide-Driven Assembly

Biochemical systems make use of out-of-equilibrium polymers generated under kinetic control. Inspired by these systems, many abiotic supramolecular polymers driven by chemical fuel reactions have been reported. Conversely, polymers based on transient covalent bonds have received little attention, even though they have the potential to complement supramolecular systems by generating transient structures based on stronger bonds and by offering a straightforward tuning of reaction kinetics. In this study, we show that simple aqueous dicarboxylic acids give poly(anhydrides) when treated with the carbodiimide EDC. Transient covalent polymers with molecular weights exceeding 15,000 are generated which then decompose over the course of hours to weeks. Disassembly kinetics can be controlled using simple substituent effects in the monomer design. The impact of solvent polarity, carbodiimide concentration, temperature, pyridine concentration, and monomer concentration on polymer properties and lifetimes has been investigated. The results reveal substantial control over polymer assembly and disassembly kinetics, highlighting the potential for fine-tuned kinetic control in nonequilibrium polymerization systems.

Kinetic Trapping of an Out-of-Equilibrium Dynamic Library of Imines by Changing Solvent

A well-behaved dynamic library composed of two imines and corresponding amines was subjected to the action of an activated carboxylic acid (ACA), whose decarboxylation is known to be base promoted, in different solvents, namely CD2Cl2, CD3CN, and mixtures of them. Two non-equilibrium systems are consequently obtained: i) a dissipative (CD2Cl2) and ii) an out-of-equilibrium (CD3CN) dynamic library whose composition goes back to equilibrium after a given time. In the former case, the library is fully coupled with the decarboxylation of the ACA, while in the latter, an energy ratchet operates. In the mixed solvents, the library exhibits a mediated behavior. Interestingly, in the presence of an excess of added ACA, the different behavior of the imine library in the two solvents is expected to manifest only when the excess acid is consumed.

Tunable cyclic operation of dissipative molecular switches based on anion recognition

Artificial dissipative molecular switches based on anion recognition are of great importance to simulate biological functions and construct smart materials. Five activated carboxylic acids are used as chemical fuels for dissipative molecular switches, which consist of an imidazolium macrocyclic host and a carboxylate anionic guest. By choosing different types of chemical fuels and using varied fuel concentrations, the rates of cyclic operations are tunable. The operation is capable of undergoing at least three cycles.

A Doubly Dissipative System Driven by Chemical and Radiative Stimuli

The operation of a dissipative network composed of two or three different crown-ether receptors and an alkali metal cation can be temporally driven by the use (combined or not) of two orthogonal stimuli of a different nature. More specifically, irradiation with light at a proper wavelength and/or addition of an activated carboxylic acid, are used to modulate the binding capability of the above crown-ethers towards the metal ion, allowing to control over time the occupancy of the metal cation in the crown-ether moiety of a given ligand. Thus, application of either or both of the stimuli to an initially equilibrated system, where the metal cation is distributed among the crown-ether receptors depending on the different affinities, causes a programmable change in the receptor occupancies. Consequently, the system is induced to evolve to one or more out-of-equilibrium states with different distributions of the metal cation among the different receptors. When the fuel is exhausted or/and the irradiation interrupted, the system reversibly and autonomously goes back to the initial equilibrium state. Such results may contribute to the achievement of new dissipative systems that, taking advantage of multiple and orthogonal stimuli, are featured with more sophisticated operating mechanisms and time programmability.

Controlling the Conformation of 2-Dimethylaminobiphenyls by Transient Intramolecular Hydrogen Bonding

Temporal control of molecular motions is receiving increasing attention because it is central to the development of molecular switches and motors and nanoscopic materials with life-like properties. Inspired by previous studies, here, we report that acid 12 can be used to temporally control the conformational freedom around the C-C bond connecting the two aromatic rings of the ditopic bases 4 and 5. Consistent with NMR measurements and DFT calculations, before fuel addition, the conformational motion of the two aromatic rings of both 4 and 5 mainly consists of a large amplitude torsional oscillation spanning about 260° and passing for the anti conformation (the two nitrogen atoms at opposite sides). Immediately after the addition of 12, due to the protonation of one nitrogen and consequent formation of an N-H···N intramolecular hydrogen bond, the torsional oscillation in both 4H⁺ and 5H⁺ is not only restricted to a smaller range (about 100°) but explores the previously forbidden conformational space around the syn conformation (the two nitrogen atoms at the same side). However, the new state is an out-of-equilibrium state since decarboxylation of the conjugate base of 12 takes place and, at the end of the process, the system reverts to the more conformationally mobile state.

Fast and slow walking driven by chemical fuel

We demonstrate the fast forward and slow backward motion of a biped on a tetrahedral track using chemical fuel, cooperative binding and kinetic selectivity. Walking of the biped is based on its dibenzyl amine feet that bind to zinc porphyrin units and, upon protonation, to dibenzo 24-crown-8 sites affording pseudorotaxane linkages.

Dissipative Systems Driven by the Decarboxylation of Activated Carboxylic Acids

ConspectusThe achievement of artificial systems capable of being maintained in out-of-equilibrium states featuring functional properties is a main goal of current chemical research. Absorption of electromagnetic radiation or consumption of a chemical species (a "chemical fuel") are the two strategies typically employed to reach such out-of-equilibrium states, which have to persist as long as one of the above stimuli is present. For this reason such systems are often referred to as "dissipative systems". In the simplest scheme, the dissipative system is initially found in a resting, equilibrium state. The addition of a chemical fuel causes the system to shift to an out-of-equilibrium state. When the fuel is exhausted, the system reverts to the initial, equilibrium state. Thus, from a mechanistic standpoint, the dissipative system turns out to be a catalyst for the fuel consumption. It has to be noted that, although very simple, this scheme implies the chance to temporally control the dissipative system. In principle, modulating the nature and/or the amount of the chemical fuel added, one can have full control of the time spent by the system in the out-of-equilibrium state.In 2016, we found that 2-cyano-2-phenylpropanoic acid (1a), whose decarboxylation proceeds smoothly under mild basic conditions, could be used as a chemical fuel to drive the back and forth motion of a catenane-based molecular switch. The acid donates a proton to the catenane that passes from the neutral state A to the transient protonated state B. Decarboxylation of the resulting carboxylate (1acb), generates a carbanion, which, being a strong base, retakes the proton from the protonated catenane that, consequently, returns to the initial state A. The larger the amount of the added fuel, the longer the time spent by the catenane in the transient, out-of-equilibrium state. Since then, acid 1a and other activated carboxylic acids (ACAs) have been used to drive the operation of a large number of dissipative systems based on the acid-base reaction, from molecular machines to host-guest systems, from catalysts to smart materials, and so on. This Account illustrates such systems with the purpose to show the wide applicability of ACAs as chemical fuels. This generality is due to the simplicity of the idea underlying the operation principle of ACAs, which always translates into simple experimental requirements.

Autonomous Soft Robots Empowered by Chemical Reaction Networks

Hydrogel actuators are important for designing stimuli-sensitive soft robots. They generate mechanical motion by exploiting compartmentalized (de)swelling in response to a stimulus. However, classical switching methods, such as manually lowering or increasing the pH, cannot provide more complex autonomous motions. By coupling an autonomously operating pH-flip with programmable lifetimes to a hydrogel system containing pH-responsive and non-responsive compartments, autoonenomous forward and backward motion as well as more complex tasks, such as interlocking of "puzzle pieces" and collection of objects are realized. All operations are initiated by one simple trigger, and the devices operate in a "fire and forget" mode. More complex self-regulatory behavior is obtained by adding chemo-mechano-chemo feedback mechanisms. Due to its simplicity, this method shows great potential for the autonomous operation of soft grippers and metamaterials.

Construction of transient supramolecular polymers controlled by mass transfer in biphasic systems

Inspired by life assembly systems, the construction of transient assembly systems with spatiotemporal control is crucial for developing intelligent materials. A widely adopted strategy is to couple the self-assembly with chemical reaction networks. However, orchestrating the kinetics of multiple reactions and assembly/disassembly processes without crosstalk in homogeneous solutions is not an easy task. To address this challenge, we propose a generic strategy by separating components into different phases, therefore, the evolution process of the system could be easily regulated by controlling the transport of components through different phases. Interference of multiple components that are troublesome in homogeneous systems could be diminished. Meanwhile, limited experimental parameters are involved in tuning the mass transfer instead of the complex kinetic matching and harsh reaction selectivity requirements. As a proof of concept, a transient metallo-supramolecular polymer (MSP) with dynamic luminescent color was constructed in an oil-water biphasic system by controlling the diffusion of the deactivator (water molecules) from the water phase into the oil phase. The lifetime of transient MSP could be precisely regulated not only by the content of chemical fuel, but also factors that affect the efficiency of mass transfer in between phases, such as the volume of the water phase, the stirring rate, and the temperature. We believe this strategy can be further extended to multi-compartment systems with passive diffusion or active transport of components, towards life-like complex assembly systems.

Following a Silent Metal Ion: A Combined X-ray Absorption and Nuclear Magnetic Resonance Spectroscopic Study of the Zn2+ Cation Dissipative Translocation between Two Different Ligands

The dissipative translocation of the Zn2+ ion between two prototypical coordination complexes has been investigated by combining X-ray absorption and 1H NMR spectroscopy. An integrated experimental and theoretical approach, based on state-of-the-art Multivariate Curve Resolution and DFT based theoretical analyses, is presented as a means to understand the concentration time evolution of all relevant Zn and organic species in the investigated processes, and accurately characterize the solution structures of the key metal coordination complexes. Specifically, we investigate the dissipative translocation of the Zn2+ cation from hexaaza-18-crown-6 to two terpyridine moieties and back again to hexaaza-18-crown-6 using 2-cyano-2-phenylpropanoic acid and its para-chloro derivative as fuels. Our interdisciplinary approach has been proven to be a valuable tool to shed light on reactive systems containing metal ions that are silent to other spectroscopic methods. These combined experimental approaches will enable future applications to chemical and biological systems in a predictive manner.

Heteroleptic metallosupramolecular aggregates/complexation for supramolecular catalysis

Supramolecular catalysis is reviewed with an eye on heteroleptic aggregates/complexation. Since most of the current metallosupramolecular catalytic systems are homoleptic in nature, the idea of breaking/reducing symmetry has ignited a vivid search for heteroleptic aggregates that are made up by different components. Their higher degree of functional diversity and structural heterogeneity allows, as demonstrated by Nature by the multicomponent ATP synthase motor, a more detailed and refined configuration of purposeful machinery. Furthermore, (metallo)supramolecular catalysis is shown to extend beyond the single "supramolecular unit" and to reach far into the field and concepts of systems chemistry and information science.

Distinctive features and challenges in catenane chemistry

From being an aesthetic molecular object to a building block for the construction of molecular machines, catenanes and related mechanically interlocked molecules (MIMs) continue to attract immense interest in many research areas. Catenane chemistry is closely tied to that of rotaxanes and knots, and involves concepts like mechanical bonds, chemical topology and co-conformation that are unique to these molecules. Yet, because of their different topological structures and mechanical bond properties, there are some fundamental differences between the chemistry of catenanes and that of rotaxanes and knots although the boundary is sometimes blurred. Clearly distinguishing these differences, in aspects of bonding, structure, synthesis and properties, between catenanes and other MIMs is therefore of fundamental importance to understand their chemistry and explore the new opportunities from mechanical bonds.

Temporal Control of the Host-Guest Properties of a Calix[6]arene Receptor by the Use of a Chemical Fuel

The host–guest interaction of a 1,3,5-trisaminocalix[6]arene receptor with N-methylisoquinolinium trifluoromethanesulfonate (K_ass of 500 ± 30 M^–1 in CD₂Cl₂) can be dissipatively driven by means of 2-cyano-2-(4′-chloro)phenylpropanoic acid used as a convenient chemical fuel. When the fuel is added to a dichloromethane solution containing the above complex, the host is induced to immediately release the guest in the bulk solution. Consumption of the fuel allows the guest to be re-uptaken by the host. The operation can be satisfactorily reiterated with four subsequent additions of fuel, producing four successive release–reuptake cycles. The percentage of the guest temporarily released in the bulk solution by the host and the time required for the reuptake process can be finely regulated by varying the quantities of added fuel.

Concurrent base and silver(I) catalysis pulsed by fuel acid

Treatment of a crown-ether receptor and a silver(I)-loaded cyclam derivative (NetState-I) with a fuel acid reversibly afforded the protonated cyclam and the silver(I)-loaded crown ether (NetState-II). While NetState-I was catalytically OFF, a base-catalysed Michael addition and a silver(I)-catalysed oxime cyclisation reaction was pulsed under dissipative conditions in NetState-II.

Dissipative control of the fluorescence of a 1,3-dipyrenyl calix[4]arene in the cone conformation

The temporal control (ON/OFF/ON) of the fluorescence of a dichloromethane/acetonitrile 1 : 1 solution of calixarene 3 decorated with two pyrenyl moieties at the upper rim is attained by the addition of CCl₃CO₂H used as a convenient chemical fuel.

Two Faces of the Same Coin: Coupling X-Ray Absorption and NMR Spectroscopies to Investigate the Exchange Reaction Between Prototypical Cu Coordination Complexes

The satisfactory rationalization of complex reactive pathways in solution chemistry may greatly benefit from the combined use of advanced experimental and theoretical complementary methods of analysis. In this work, we combine X-Ray Absorption and ¹ H NMR spectroscopies with state-of-the-art Multivariate Curve Resolution and theoretical analyses to gain a comprehensive view on a prototypical reaction involving the variation of the oxidation state and local structure environment of a selected metal ion coordinated by organic ligands. Specifically, we investigate the 2-cyano-2-phenylpropanoic acid reduction of the octahedral complex established by the Cu²⁺ ion with terpyridine to the tetrahedral complex formed by Cu⁺ and neocuproine. Through our interdisciplinary approach we gain insights into the nature, concentration time evolution and structures of the key metal (XAS measurements) and organic (¹ H NMR measurements) species under reaction. We believe our method may prove to be useful in the toolbox necessary to understand the mechanisms of reactive processes of interest in solution.

Dissipative operation of pH-responsive DNA-based nanodevices

We demonstrate here the use of 2-(4-chlorophenyl)-2-cyanopropanoic acid (CPA) and nitroacetic acid (NAA) as convenient chemical fuels to drive the dissipative operation of DNA-based nanodevices. Addition of either of the fuel acids to a water solution initially causes a rapid transient pH decrease, which is then followed by a slower pH increase. We have employed such low-to-high pH cycles to control in a dissipative way the operation of two model DNA-based nanodevices: a DNA nanoswitch undergoing time-programmable open–close–open cycles of motion, and a DNA-based receptor able to release-uptake a DNA cargo strand. The kinetics of the transient operation of both systems can be easily modulated by varying the concentration of the acid fuel added to the solution and both acid fuels show an efficient reversibility which further supports their versatility.

We demonstrate here the use of 2-(4-chlorophenyl)-2-cyanopropanoic acid (CPA) and nitroacetic acid (NAA) as convenient chemical fuels to drive the dissipative operation of DNA-based nanodevices.

Off-Equilibrium Speed Control of a Multistage Molecular Rotor: 2-Fold Chemical Fueling by Acid or Silver(I)

Driving conformational motion in defined off-equilibrium oscillations can be achieved using chemical fuels. When the ultrafast turnstile 1 (k₂₉₈> 10¹² Hz) was fueled with 2-cyano-2-phenylpropanoic acid (Fuel 1), the diprotonated rotor [H₂(1)]²⁺ (k₂₉₈ = 84.0 kHz) formed as a transient regaining the dynamics of the initial turnstile after consumption of the fuel (135 min). Upon addition of silver(I) (Fuel 2) to turnstile 1, the metastable rotor [Ag₂(1)]²⁺ (k₂₉₈ = 1.57 Hz) was initially furnished, but due to a consequentially triggered S_N2 reaction, the Ag⁺ ions were consumed as insoluble AgBr along with regeneration of 1 (within 3 h). The off-equilibrium fast ⇆ slow rotor conversions fueled by acid and silver(I) were directly monitored by fluorescence and ¹H NMR. In addition, metal ion exchange was fueled enabling off-equilibrium oscillations between rotors [Li₂(1)]²⁺ ⇆ [Ag₂(1)]²⁺. In the end, both sustainability and efficiency of the process were increased in unison by using the interfering proton waste in the formation of a [2]pseudorotaxane.

Time-programmable pH: decarboxylation of nitroacetic acid allows the time-controlled rising of pH to a definite value

In this report it is shown that nitroacetic acid 1 (O2NCH2CO2H) can be conveniently used to control the pH of a water solution over time. Time-programmable sequences of the kind pH1(high)-pH2(low)-pH3(high) can be achieved, where both the extent of the initial pH jump (pH1(high)-pH2(low)) and the time required for the subsequent pH rising (pH2(low)-pH3(high)) can be predictably controlled by a judicious choice of the absolute and relative concentrations of the reagents (acid 1 and NaOH). Successive pH1(high)-pH2(low)-pH3(high) sequences can be obtained by subsequent additions of acid 1. As a proof of concept, the method is applied to control over time the pH-dependent host-guest interaction between alpha-cyclodextrin and p-aminobenzoic acid.

Fine-tuning of the optical output in a dual responsive catenane switch

A [2]catenane switch where the intramolecular pyrene excimer emission can be controlled by orthogonal cation binding and solvent polarity change in various amplitudes and dynamic ranges is reported.

The Transient Covalent Bond in Abiotic Nonequilibrium Systems

Biochemical systems accomplish many critical functions with by operating out-of-equilibrium using the energy of chemical fuels. The formation of a transient covalent bond is a simple but very effective tool in designing analogous reaction networks. This Minireview focuses on the fuel chemistries that have been used to generate transient bonds in recent demonstrations of abiotic nonequilibrium systems (i.e., systems that do not make use of biological components). Fuel reactions are divided into two fundamental classifications depending on whether the fuel contributes structural elements to the activated state, a distinction that dictates how they can be used. Reported systems are further categorized by overall fuel reaction (e.g., hydrolysis of alkylating agents, carbodiimide hydration) and illustrate how similar chemistry can be used to effect a wide range of nonequilibrium behavior, ranging from self-assembly to the operation of molecular machines.

Trace mild acid-catalysed Z → E isomerization of norbornene-fused stilbene derivatives: intelligent chiral molecular photoswitches with controllable self-recovery

Stilbene derivatives have long been known to undergo "acid-catalyzed" Z → E isomerization, where a strong mineral acid at high concentration is practically necessary. Such severe reaction conditions often cause undesired by-reactions and limit their potential application. Herein, we present a trace mild acid-catalyzed Z → E isomerization found with stilbene derivatives fused with a norbornene moiety. By-reactions, such as the migration of the C[double bond, length as m-dash]C double bond and electrophilic addition reactions, were completely inhibited because of the ring strain caused by the fused norbornene component. Direct photolysis of the E isomers at selected wavelengths led to the E → Z photoisomerization of these stilbene derivatives and thus constituted a unique class of molecular switches orthogonally controllable by light and acid. The catalytic amount of acid could be readily removed, and the Z → E isomerization could be controlled by turning on/off the irradiation of a photoacid, which allowed repeated isomerization in a non-invasive manner. Moreover, the Z isomer produced by photoisomerization could spontaneously self-recover to the E isomer in the presence of a catalytic amount of acid. The kinetics of Z → E isomerization were adjustable by manipulating catalytic factors and, therefore, unprecedented molecular photoswitches with adjustable self-recovery were realized.

Time Programmable Locking/Unlocking of the Calix[4]arene Scaffold by Means of Chemical Fuels

In this work, we report that 2-cyano-2-phenylpropanoic acid and its p-Cl, p-CH₃ and p-OCH₃ derivatives can be used as chemical fuels to control the geometry of the calix[4]arene scaffold in its cone conformation. It is shown that, under the action of the fuel, the cone calix[4]arene platform assumes a "locked" shape with two opposite aromatic rings strongly convergent and the other two strongly divergent ("pinched cone" conformation). Only when the fuel is exhausted, the cone calix[4]arene scaffold returns to its resting, "unlocked" shape. Remarkably, the duration of the "locked" state can be controlled at will by varying the fuel structure or amount. A kinetic study of the process shows that the consume of the fuel is catalyzed by the "unlocked" calixarene that behaves as an autocatalyst for its own production. A mechanism is proposed for the reaction of fuel consumption.

Dissipative Assembly of Macrocycles Comprising Multiple Transient Bonds

Dissipative assembly has great potential for the creation of new adaptive chemical systems. However, while molecular assembly at equilibrium is routinely used to prepare complex architectures from polyfunctional monomers, species formed out of equilibrium have, to this point, been structurally very simple. In most examples the fuel simply effects the formation of a single short-lived covalent bond. Herein, we show that chemical fuels can assemble bifunctional components into macrocycles containing multiple transient bonds. Specifically, dicarboxylic acids give aqueous dianhydride macrocycles on treatment with a carbodiimide. The macrocycles are assembled efficiently as a consequence of both fuel-dependent and fuel-independent mechanisms; they undergo slower decomposition, building up as the fuel recycles the components, and are a favored product of the dynamic exchange of the anhydride bonds. These results create new possibilities for generating structurally sophisticated out-of-equilibrium species.

Controlling the liberation rate of the in situ release of a chemical fuel for the operationally autonomous motions of molecular machines

Second-order rate constants of the aminolysis of 2-cyano-2-phenylpropanoic anhydride 3 by a series of N-methylanilines differently substituted in the aromatic moiety (4a-d) were measured in dichloromethane. The common reaction product of aminolysis is 2-cyano-2-phenylpropanoic acid 1, which is known to be an effective fuel for acid-base driven molecular machines, but cannot be used in molar excess with respect to the machine. The motivation behind the kinetic study has been the prospect of using the aminolysis of 3 to supply the machine with fuel at a rate that is never so high as to overfeed the system, thus avoiding the malfunction of the machine with concomitant waste of fuel. Knowledge of the kinetic parameters dictated the choice of 4c as the best nucleophile in the lot for feeding acid 1 into a catenane-based molecular machine at a rate that ensured a correct operation.

Simplicity in the Design, Operation, and Applications of Mechanically Interlocked Molecular Machines

Mechanically interlocked molecules are perhaps best known as components of molecular machines, a view further reinforced by the Nobel Prize in 2016 to Stoddart and Sauvage. Despite amazing progress since these pioneers of the field reported the first examples of molecular shuttles, genuine applications of interlocked molecular machines remain elusive, and many barriers remain to be overcome before such molecular devices make the transition from impressive prototypes on the laboratory bench to useful products. Here, we discuss simplicity as a design principle that could be applied in the development of the next generation of molecular machines with a view to moving toward real-world applications of these intriguing systems in the longer term.

Structure-Property Effects in the Generation of Transient Aqueous Benzoic Acid Anhydrides by Carbodiimide Fuels

The design of dissipative systems, which operate out-of-equilibrium by consuming chemical fuels, is challenging. As yet, there are a few examples of privileged fuel chemistries that can be broadly applied in abiotic systems in the same way that ATP hydrolysis is exploited throughout biochemistry. The key issue is that designing nonequilibrium systems is inherently about balancing the relative rates of coupled reactions. The use of carbodiimides as fuels to generate transient aqueous carboxylic anhydrides has recently been used in examples of new nonequilibrium materials and supramolecular assemblies. Here, we explore the kinetics of formation and decomposition of a series of benzoic anhydrides generated from the corresponding acids and EDC under typical conditions (EDC = N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride). The reactions can be described by a simple mechanism that merges known behavior for the two processes independently. Structure-property effects in these systems are dominated by differences in the anhydride decomposition rate. The kinetic parameters allow trends in concentration-dependent properties to be simulated, such as reaction lifetimes, peak anhydride concentrations, and yields. For key properties, there are diminishing returns with the addition of increasing amounts of fuel. These results should provide useful guidelines for the design of functional systems making use of this chemistry.

2-Cyano-2-phenylpropanoic Acid Triggers the Back and Forth Motions of an Acid-Base-Operated Paramagnetic Molecular Switch

The back and forth motions of a crown-ether based wheel along the axis of a bistable rotaxane are triggered by the decarboxylation of 2-cyano-2-phenylpropanoic acid and detected by the oscillation of the EPR nitrogen splitting of a dialkyl nitroxide function mounted within the macrocyclic ring. When the p-Cl derivative of the acid is used, back and forth motions are accelerated. Conversely, with p-CH₃ and p-OCH₃ derivatives, the back motion is strongly inhibited by the insurgence of collateral radical reactions.

Dissipative Catalysis with a Molecular Machine

We report on catalysis by a fuel-induced transient state of a synthetic molecular machine. A [2]rotaxane molecular shuttle containing secondary ammonium/amine and thiourea stations is converted between catalytically inactive and active states by pulses of a chemical fuel (trichloroacetic acid), which is itself decomposed by the machine and/or the presence of additional base. The ON-state of the rotaxane catalyzes the reduction of a nitrostyrene by transfer hydrogenation. By varying the amount of fuel added, the lifetime of the rotaxane ON-state can be regulated and temporal control of catalysis achieved. The system can be pulsed with chemical fuel several times in succession, with each pulse activating catalysis for a time period determined by the amount of fuel added. Dissipative catalysis by synthetic molecular machines has implications for the future design of networks that feature communication and signaling between the components.

Step-by-step reaction-powered mechanical motion triggered by a chemical fuel pulse

Natural molecular machines perform important tasks in organisms under a reasonable energy supply strategy: a series of step-by-step biochemical reactions after the intake of a fuel such as glucose. As analogues of biomolecular machines, most artificial molecular machines and shuttles are still powered by two opposite stimuli, such as acid and base or oxidation and reduction. This inconvenient stimulus method for artificial molecular machines and shuttles creates great obstacles for realizing more functions of artificial molecular machines and shuttles owing to low energy utilization efficiency and troublesome operation. In this work, we report a new step-by-step reaction system combining two known reactions: (1) the formation of [bis(trifluoroacetoxy)iodo]benzene from the reaction of iodosylbenzene and trifluoroacetic acid; and (2) the catalytic oxidation of alcohols by [bis(trifluoroacetoxy)iodo]benzene in the presence of TEMPO. Owing to the acid absorption features of the first reaction and the acid releasing characteristics of the second reaction, the new step-by-step reaction obtains a pH oscillation feature. Taking advantage of the pH oscillation feature, the new reaction cycle triggered by iodosylbenzene was coupled with an acid-base switchable helicarene-based molecular shuttle. Benefitting from the reaction rate difference of the two known reactions (the reaction rate of the first reaction is faster than that of the second reaction), the movement of the helicarene on the axle could be controlled automatically by the reaction system through adding iodosylbenzene to a solution of alcohol, TEMPO and protonated rotaxane, and the manual addition of another opposite stimulus could be avoided.

Photoinduced Release of a Chemical Fuel for Acid-Base-Operated Molecular Machines

Back and forth motions of the acid-base-operated molecular switch 1 are photo-controlled by irradiation of a solution, which also contains the photolabile pre-fuel 4. The photo-stimulated deprotection of the pre-fuel produces controlled amounts of acid 2, the base-promoted decarboxylation of which fuels the back and forth motions of the Sauvage-type [2]-catenane-based molecular switch. Because switch 1 and pre-fuel 4 do not interact in the absence of irradiation, an excess of the latter with respect to 1 can be added to the solution from the beginning. In principle, photocontrol of the back and forth motions of any molecular machine, the operation of which is guided by protonation/deprotonation, could be attained by use of pre-fuel 4, or of any other protected acid that undergoes deprotection by irradiation with light at a proper wavelength, followed by decarboxylation under conveniently mild conditions.

Oscillating Emission of [2]Rotaxane Driven by Chemical Fuel

A molecular shuttle consisting of a dibenzo-24-crown-8 macrocycle and an axle with two degenerate peripheral triazolium stations, a central dibenzyl ammonium station, and two anthracenes stoppers was exposed to 2-cyano-2-phenylpropanoic acid as a chemical fuel. Protonation/deprotonation of the amine reversibly switches the rotaxane from a static and little emissive to a dynamic fluorescent shuttling device, the latter exhibiting rapid motion (15 kHz at 25 °C). Four fuel cycles were run.

Making and Operating Molecular Machines: A Multidisciplinary Challenge

Movement is one of the central attributes of life, and a key feature in many technological processes. While artificial motion is typically provided by macroscopic engines powered by internal combustion or electrical energy, movement in living organisms is produced by machines and motors of molecular size that typically exploit the energy of chemical fuels at ambient temperature to generate forces and ultimately execute functions. The progress in several areas of chemistry, together with an improved understanding of biomolecular machines, has led to the development of a large variety of wholly synthetic molecular machines. These systems have the potential to bring about radical innovations in several areas of technology and medicine. In this Minireview, we discuss, with the help of a few examples, the multidisciplinary aspects of research on artificial molecular machines and highlight its translational character.