Time lapse AFM on vesicle formation from mixed lipid bilayers induced by the membrane-active peptide melittin

The Functionality of Membrane-Inserting Proteins and Peptides: Curvature Sensing, Generation, and Pore Formation

Proteins and peptides with hydrophobic and amphiphilic segments are responsible for many biological functions. The sensing and generation of membrane curvature are the functions of several protein domains or motifs. While some specific membrane proteins play an essential role in controlling the curvature of distinct intracellular membranes, others participate in various cellular processes such as clathrin-mediated endocytosis, where several proteins sort themselves at the neck of the membrane bud. A few membrane-inserting proteins form nanopores that permeate selective ions and water to cross the membrane. In addition, many natural and synthetic small peptides and protein toxins disrupt the membrane by inducing nonspecific pores in the membrane. The pore formation causes cell death through the uncontrolled exchange between interior and exterior cellular contents. In this article, we discuss the insertion depth and orientation of protein/peptide helices, and their role as a sensor and inducer of membrane curvature as well as a pore former in the membrane. We anticipate that this extensive review will assist biophysicists to gain insight into curvature sensing, generation, and pore formation by membrane insertion.

Transition between Different Diffusion Modes of Individual Lipids during the Membrane-Specific Action of As-CATH4 Peptides

The cell membrane permeabilization ability of immune defense antimicrobial peptides (AMPs) is widely applied in biomedicine. Although the mechanisms of peptide-membrane interactions have been widely investigated, analyses at the molecular level are still lacking. Herein, the membrane-specific action of a native AMP, As-CATH4, is investigated using a single-lipid tracking method in combination with live cell and model membrane assays conducted at different scales. The peptide-membrane interaction process is characterized by analyzing single-lipid diffusion behaviors. As-CATH4 exhibits potent antimicrobial activity through bacterial membrane permeabilization, with moderate cytotoxicity against mammalian cells. In-plane diffusion analyses of individual lipids show that the lipid molecules exhibit non-Gaussian and heterogeneous diffusion behaviors in both pristine and peptide-treated membranes, which can be decomposed into two Gaussian subgroups corresponding to normal- and slow-diffusive lipids. Assessment of the temporal evolution of these two diffusion modes of lipids reveal that the peptide action states of As-CATH4 include surface binding, transmembrane defect formation, and dynamic equilibrium. The action mechanisms of As-CATH4 at varying concentrations and against different membranes are distinguished. This work resolves the simultaneous mixed diffusion mechanisms of single lipids in biomimetic cell membranes, especially during dynamic membrane permeabilization by AMPs.

Rational design of an anti-cancer peptide inhibiting CD147 / Cyp A interaction

The CD147 / Cyp A interaction is a critical pathway in cancer types and an essential factor in entering the COVID-19 virus into the host cell. Melittin acts as an inhibitory peptide in cancer types by blocking the CD147/ Cyp A interaction. The clinical application of Melittin is limited due to weak penetration into cancer cells. TAT is an arginine-rich peptide with high penetration ability into cells widely used in drug delivery systems. This study aimed to design a hybrid peptide derived from Melittin and TAT to inhibit CD147 /Cyp A interaction. An amino acid region with high anti-cancer activity in Melittin was selected based on the physicochemical properties. Based on the results, a truncated Melittin peptide with 15 amino acids by the GGGS linker was fused to a TAT peptide (nine amino acids) to increase the penetration rate into the cell. A new hybrid peptide analog(TM) was selected by replacing the glycine with serine based on random point mutation. Docking results indicated that the TM peptide acts as an inhibitory peptide with high binding energy when interacting with CD147 and the CypA proteins. RMSD and RMSF results confirmed the high stability of the TM peptide in interaction with CD147. Also, the coarse-grained simulation showed the penetration potential of TM peptide into the DOPS-DOPC model membrane. Our findings indicated that the designed multifunctional peptide could be an attractive therapeutic candidate to halter tumor types and COVID-19 infection.

Heterogeneous Structural Disturbance of Cell Membrane by Peptides with Modulated Hydrophobic Properties

Extensive effort has been devoted to developing new clinical therapies based on membrane-active peptides (MAPs). Previous models on the membrane action mechanisms of these peptides mostly focused on the MAP−membrane interactions in a local region, while the influence of the spatial heterogeneity of the MAP distribution on the membrane was much ignored. Herein, three types of natural peptide variants, AS4-1, AS4-5, and AS4-9, with similar amphiphilic α-helical structures but distinct hydrophobic degrees (AS4-1 < AS4-5 < AS4-9) and net charges (+9 vs. +7 vs. +5), were used to interact with a mixed phosphatidylcholine (PC) and phosphatidylglycerol (PG) membrane. A combination of giant unilamellar vesicle (GUV) leakage assays, atomic force microscopy (AFM) characterizations, and molecular dynamics (MD) simulations demonstrated the coexistence of multiple action mechanisms of peptides on a membrane, probably due to the spatially heterogeneous distribution of peptides on the membrane surface. Specifically, the most hydrophobic peptide (i.e., AS4-9) had the strongest membrane binding, perturbation, and permeabilization effects, leading to the formation of large peptide−lipid aggregates (10 ± 5 nm in height and 150 ± 50 nm in size), as well as continuous fragments and ridges on the supported membrane surface. The AS4-5 peptides, with a half-hydrophilic and half-hydrophobic structure, induced membrane lysis in addition to reconstruction. The most hydrophilic peptide AS4-1 only exhibited unstable binding on the supported membrane surface. These results demonstrate the heterogeneous structural disturbance of model cell membranes by amphiphilic α-helical peptides, which could be significantly strengthened by increasing the degree of hydrophobicity and/or local number density of peptides. This work provides support for the modulation of the membrane activity of MAPs by adjusting their hydrophobicity and local concentration.

Molecular packing of lipid membranes and action mechanisms of membrane-active peptides

Biomembranes are involved in diverse cellular activities. How membranes and proteins interact in the activities might hinge on the former's physical characteristics, which in turn are influenced by packing of lipid molecules. Yet, the validity of this understanding and its mechanism are unclear. By varying chain saturation of membranes, we explored correlations between lipid packing and peptide-mediated membrane disruption for the antimicrobial peptide, melittin, and amyloidogenic peptide, β-amyloid (1-42). Remarkably, reducing molecular packing flexibility enhanced the membrane disruption, possibly due to a shift from membrane perforation to micellization. A theoretical analysis suggested the energetic basis of this shift. This mechanistically shows that a peptide's mechanism might be dictated not only by its intrinsic properties but also by physical characteristics of membranes.

Real-time monitoring the interfacial dynamic processes at model cell membranes: Taking cell penetrating peptide TAT as an example

A real-time and molecule-level monitoring of the interfacial dynamic interactions between molecules and a cell membrane is of vital importance. Herein, taking TAT, one of the most representative cell penetrating peptides, as an example, a photo-voltage transient technique and a dynamic giant bistratal vesicle (GBV) leakage method were combined with the traditional giant unilamellar vesicle (GUV) leakage assays, to provide a molecule-level understanding of the dynamic membrane interaction process performed in a low ionic strength and neutral pH condition. The photo-voltage test based on supported phospholipid bilayers showed a quick disturbance (<1 min) followed by a continuous reconstruction of the membrane by peptides, leading to a slight destruction (at TAT concentrations lower than 1 μg mL^-1, i.e., 0.64 μM) or strong damage (e.g. at 10 μg mL^-1, i.e., 6.4 μM) of the bilayer structure. The GUV/GBV leakage assays further demonstrated the TAT-induced membrane deformation and transmembrane diffusion of dyes, which occurred in an immediate, linear, and TAT-concentration dependent manner. Moreover, the flux of dye across the substrate-immobilized membranes was approximately three times of that across the substrate-free ones. This work gives information on time and molecular mechanism of the TAT-membrane interactions, demonstrates the different permeabilizing effects of TAT on immobilized and free membranes. Overall, it provides useful strategies to investigate the nano-bio interfacial interactions in a simple, global and real-time way.

Estimation of pore dimensions in lipid membranes induced by peptides and other biomolecules: A review

The cytoplasmic membrane is one of the most frequent cell targets of antimicrobial peptides (AMPs) and other biomolecules. Understanding the mechanism of action of AMPs at the molecular level is of utmost importance for designing of new membrane-specific molecules. In particular, the formation of pores, the structure and size of these pores are of great interest and require nanoscale resolution approaches, therefore, biophysical strategies are essential to achieve an understanding of these processes at this scale. In the case of membrane active peptides, pore formation or general membrane disruption is usually the last step before cell death, and so, pore size is generally directly associated to pore structure and stability and loss of cellular homeostasis, implicated in overall peptide activity. Up to date, there has not been a critical review discussing the methods that can be used specifically for estimating the pore dimensions induced by membrane active peptides. In this review we discuss the scope, relevance and popularity of the different biophysical techniques such as liposome leakage experiments, advanced microscopy, neutron or X-ray scattering, electrophysiological techniques and molecular dynamics studies, all of them useful for determining pore structure and dimension.

Atomic force microscopy to elucidate how peptides disrupt membranes

Atomic force microscopy is an increasingly attractive tool to study how peptides disrupt membranes. Often performed on reconstituted lipid bilayers, it provides access to time and length scales that allow dynamic investigations with nanometre resolution. Over the last decade, AFM studies have enabled visualisation of membrane disruption mechanisms by antimicrobial or host defence peptides, including peptides that target malignant cells and biofilms. Moreover, the emergence of high-speed modalities of the technique broadens the scope of investigations to antimicrobial kinetics as well as the imaging of peptide action on live cells in real time. This review describes how methodological advances in AFM facilitate new insights into membrane disruption mechanisms.

Membrane morphology effects in quartz crystal microbalance characterization of antimicrobial peptide activity

The mechanism of action of membrane disrupting antimicrobial peptides (AMPs) and the basis of their specificity and selectivity to pathogens are often studied by using biomimetic model membranes. It is often assumed that all model membrane morphologies, e.g. liposomes, supported bilayers, tethered bilayers etc. are equivalent. In this work the validity of this assumption was assessed. Melittin was used as the reference AMP as it can disrupt both bacterial and mammalian-mimetic membranes. Quartz crystal microbalance (QCM) viscoelastic fingerprints show characteristic differences between the three model morphologies: single bilayer membranes, multilamellar membrane stacks and unilamellar liposomes. In the second and third case, initial trends show material removal instead of material addition as in the single bilayer case, consistent with dissolution of some bilayers, and bursting liposomes, respectively. The latter is accompanied by a characteristic drop in the dissipation signal as the liposomes collapse. The results also highlight an important limitation of the QCM method, the need for a well established reference system for qualitative analysis of the viscoelastic fingerprints, and thus the importance of using the right model system, i.e. single bilayer membrane, for studies of the mechanism of action of AMPs.

Design and use of model membranes to study biomolecular interactions using complementary surface-sensitive techniques

Cellular membranes are complex structures and simplified analogues in the form of model membranes or biomembranes are used as platforms to understand fundamental properties of the membrane itself as well as interactions with various biomolecules such as drugs, peptides and proteins. Model membranes at the air-liquid and solid-liquid interfaces can be studied using a range of complementary surface-sensitive techniques to give a detailed picture of both the structure and physicochemical properties of the membrane and its resulting interactions. In this review, we will present the main planar model membranes used in the field to date with a focus on monolayers at the air-liquid interface, supported lipid bilayers at the solid-liquid interface and advanced membrane models such as tethered and floating membranes. We will then briefly present the principles as well as the main type of information on molecular interactions at model membranes accessible using a Langmuir trough, quartz crystal microbalance with dissipation monitoring, ellipsometry, atomic force microscopy, Brewster angle microscopy, Infrared spectroscopy, and neutron and X-ray reflectometry. A consistent example for following biomolecular interactions at model membranes is used across many of the techniques in terms of the well-studied antimicrobial peptide Melittin. The overall objective is to establish an understanding of the information accessible from each technique, their respective advantages and limitations, and their complementarity.

The Effect of Charge on Melittin-Induced Changes in Membrane Structure and Morphology

The binding of melittin to a range of phospholipid bilayers was studied using dual polarisation interferometry and atomic force microscopy. The phospholipid model membranes included zwitterionic dimyristylphosphatidylcholine (DMPC), together with mixtures of DMPC/dimyristylphosphatidylglycerol (DMPG) and DMPC/DMPG/cholesterol. Melittin caused significant disruption on all bilayers, but differences in morphological changes during binding were different on each membrane. Overall, the results demonstrate that the process of membrane disruption follows distinct structural changes for different lipid mixtures irrespective of the strength of binding to the membrane surface.

Visualization and measurement of the local absorption coefficients of single bilayer phospholipid membranes using scanning near-field optical microscopy

Here we report the results of shear-mode thicknesses and absorption coefficient measurements made on neat membranes using scanning near-field optical microscopy (SNOM). Biomimic neat membranes composed of two different types of phoshpholipid molecules: 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2- dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) were found to exhibit different absorption coefficients under the SNOM. The localization of the lipids could be identified and correlated to the morphology of the membrane domains indicating that SNOM can be an effective and accurate approach for the label-free characterization of the structure-function relationships in cell membranes.