Molecular mechanism of vesicle division induced by coupling between lipid geometry and membrane curvatures

Simulation of the emergence of cell-like morphologies with evolutionary potential based on virtual molecular interactions

This study explored the emergence of life using a simulation model approach. The "multiset chemical lattice model" allows the placement of virtual molecules of multiple types in each lattice cell in a two-dimensional space. This model was capable of describing a wide variety of states and interactions, such as the diffusion, chemical reaction, and polymerization of virtual molecules, in a limited number of lattice cell spaces. Moreover, this model was capable of describing a wide variety of states and interactions, even in the limited lattice cell space of 100 × 100 cells. In this study, I assumed 18 types of virtual molecules, i.e., 18 virtual numbers that do not correspond to real molecules with chemical reactions represented by transformation of the numbers that occur with a specified reaction rate probability. Furthermore, it considered the energy metabolism and energy resources in the environment, and was able to reproduce "evolution," in which a certain cell-like shape that adapted to the environment survived under conditions of decreasing amounts of energy resources in the environment. This enabled the simulation of the emergence of cell-like shapes with the four minimum cellular requirements, i.e., boundary, metabolism, replication, and evolution, based solely on the interaction of virtual molecules.

Concepts of a synthetic minimal cell: Information molecules, metabolic pathways, and vesicle reproduction

How do the living systems emerge from non-living molecular assemblies? What physical and chemical principles supported the process? To address these questions, a promising strategy is to artificially reconstruct living cells in a bottom-up way. Recently, the authors developed the "synthetic minimal cell" system showing recursive growth and division cycles, where the concepts of information molecules, metabolic pathways, and cell reproduction were artificially and concisely redesigned with the vesicle-based system. We intentionally avoided using the sophisticated molecular machinery of the biological cells and tried to redesign the cells in the simplest forms. This review focuses on the similarities and differences between the biological cells and our synthetic minimal cell concerning each concept of cells. Such comparisons between natural and artificial cells will provide insights on how the molecules should be assembled to create living systems to the wide readers in the field of synthetic biology, artificial cells, and protocells research. This review article is an extended version of the Japanese article "Growth and division of vesicles coupled with information molecules," published in SEIBUTSU-BUTSURI vol. 61, p. 378-381 (2021).

Synthesising a minimal cell with artificial metabolic pathways

A "synthetic minimal cell" is considered here as a cell-like artificial vesicle reproduction system in which a chemical and physico-chemical transformation network is regulated by information polymers. Here we synthesise such a minimal cell consisting of three units: energy production, information polymer synthesis, and vesicle reproduction. Supplied ingredients are converted to energy currencies which trigger the synthesis of an information polymer, where the vesicle membrane plays the role of a template. The information polymer promotes membrane growth. By tuning the membrane composition and permeability to osmolytes, the growing vesicles show recursive reproduction over several generations. Our "synthetic minimal cell" greatly simplifies the scheme of contemporary living cells while keeping their essence. The chemical pathways and the vesicle reproduction pathways are well described by kinetic equations and by applying the membrane elasticity model, respectively. This study provides new insights to better understand the differences and similarities between non-living forms of matter and life.

Emergence Simulation of Biological Cell-like Shapes Satisfying the Conditions of Life Using a Lattice-Type Multiset Chemical Model

Simple Summary

One of the great challenges in science is determining when, where, why, and how life first arose as well as the form taken by this life. In the present study, life was assumed to be (1) bounded, (2) replicating, (3) able to inherit information, and (4) able to metabolize energy. The various existing hypotheses provide little explanation of how these four conditions for life were established. Indeed, “how” a chemical process that simultaneously satisfies all four conditions emerged after the materials for life were in place is not always clear. In this study, a multiset chemical lattice model, which allows for virtual molecules of multiple types to be placed in each cell on a two-dimensional space, was considered. Using only the processes of molecular diffusion, reaction, and polymerization and modeling the chemical reactions of 15 types of molecules and 2 types of polymerized molecules, as well as using the morphogenesis rule of the Turing model, the process of emergence of a cell-like form with all three conditions except evolution ability was modeled and demonstrated.

Abstract

Although numerous reports using methods such as molecular dynamics, cellular automata, and artificial chemistry have clarified the process connecting non-life and life on protocell simulations, none of the models could simultaneously explain the emergence of cell shape, continuous self-replication, and replication control solely from molecular reactions and diffusion. Herein, we developed a model to generate all three conditions, except evolution ability, from hypothetical chains of chemical and molecular polymerization reactions. The present model considers a 2D lattice cell space, where virtual molecules are placed in each cell, and molecular reactions in each cell are based on a multiset rewriting rule, indicating stochastic transition of molecular species. The reaction paths of virtual molecules were implemented by replacing the rules of cellular automata that generate Turing patterns with molecular reactions. The emergence of a cell-like form with all three conditions except evolution ability was modeled and demonstrated using only molecular diffusion, reaction, and polymerization for modeling the chemical reactions of 15 types of molecules and 2 types of polymerized molecules. Furthermore, controlling self-replication is possible by changing the initial arrangement of a specific molecule. In summary, the present model is capable of investigating and refining existing hypotheses on the emergence of life.

From vesicles toward protocells and minimal cells

In contrast to ordinary condensed matter systems, "living systems" are unique. They are based on molecular compartments that reproduce themselves through (i) an uptake of ingredients and energy from the environment, and (ii) spatially and timely coordinated internal chemical transformations. These occur on the basis of instructions encoded in information molecules (DNAs). Life originated on Earth about 4 billion years ago as self-organised systems of inorganic compounds and organic molecules including macromolecules (e.g. nucleic acids and proteins) and low molar mass amphiphiles (lipids). Before the first living systems emerged from non-living forms of matter, functional molecules and dynamic molecular assemblies must have been formed as prebiotic soft matter systems. These hypothetical cell-like compartment systems often are called "protocells". Other systems that are considered as bridging units between non-living and living systems are called "minimal cells". They are synthetic, autonomous and sustainable reproducing compartment systems, but their constituents are not limited to prebiotic substances. In this review, we focus on both membrane-bounded (vesicular) protocells and minimal cells, and provide a membrane physics background which helps to understand how morphological transformations of vesicle systems might have happened and how vesicle reproduction might be coupled with metabolic reactions and information molecules. This research, which bridges matter and life, is a great challenge in which soft matter physics, systems chemistry, and synthetic biology must take joined efforts to better understand how the transformation of protocells into living systems might have occurred at the origin of life.

Protocells: Milestones and Recent Advances

The origin of life is still one of humankind's great mysteries. At the transition between nonliving and living matter, protocells, initially featureless aggregates of abiotic matter, gain the structure and functions necessary to fulfill the criteria of life. Research addressing protocells as a central element in this transition is diverse and increasingly interdisciplinary. The authors review current protocell concepts and research directions, address milestones, challenges and existing hypotheses in the context of conditions on the early Earth, and provide a concise overview of current protocell research methods.

Role of Negatively Charged Lipids Achieving Rapid Accumulation of Water-Soluble Molecules and Macromolecules into Cell-Sized Liposomes against a Concentration Gradient

Liposomes, molecular self-assemblies resembling biological membranes, are a promising scaffold to investigate the physicochemical logic behind the complexity of living cells. Despite elaborate synthetic studies constructing cell-like chemical systems using liposomes, less attention has been paid to the proactive role of the membrane emerging as dynamics of the molecular self-assembly. This study investigated the liposomes containing anionic phospholipids by exposing them to steady flow conditions using a newly constructed automatic microfluidic observation platform. We demonstrated that the liposomes accumulated even macromolecules under the microfluidic condition without pore formation. By investigating the effect of composition of liposomes and visualizing negatively charged phospholipids upon the flow, we presumed that the external flow caused a compositional asymmetry of anionic phospholipids between the inner/outer leaflets, and the asymmetry enabled a rapid accumulation of those molecules against the concentration gradient. The current study opens new research interests regarding the nature of biological membranes under steady flow conditions.

Non-equilibrium conditions inside rock pores drive fission, maintenance and selection of coacervate protocells

Key requirements for the first cells on Earth include the ability to compartmentalize and evolve. Compartmentalization spatially localizes biomolecules from a dilute pool and an evolving cell, which, as it grows and divides, permits mixing and propagation of information to daughter cells. Complex coacervate microdroplets are excellent candidates as primordial cells with the ability to partition and concentrate molecules into their core and support primitive and complex biochemical reactions. However, the evolution of coacervate protocells by fusion, growth and fission has not yet been demonstrated. In this work, a primordial environment initiated the evolution of coacervate-based protocells. Gas bubbles inside heated rock pores perturb the coacervate protocell distribution and drive the growth, fusion, division and selection of coacervate microdroplets. Our findings provide a compelling scenario for the evolution of membrane-free coacervate microdroplets on the early Earth, induced by common gas bubbles within heated rock pores.

Remodeling of Membrane Shape and Topology by Curvature Elasticity and Membrane Tension

Cellular membranes exhibit a fascinating variety of different morphologies, which are continuously remodeled by transformations of membrane shape and topology. This remodeling is essential for important biological processes (cell division, intracellular vesicle trafficking, endocytosis) and can be elucidated in a systematic and quantitative manner using synthetic membrane systems. Here, recent insights obtained from such synthetic systems are reviewed, integrating experimental observations and molecular dynamics simulations with the theory of membrane elasticity. The study starts from the polymorphism of biomembranes as observed for giant vesicles by optical microscopy and small nanovesicles in simulations. This polymorphism reflects the unusual elasticity of fluid membranes and includes the formation of membrane necks or fluid 'worm holes'. The proliferation of membrane necks generates stable multi-spherical shapes, which can form tubules and tubular junctions. Membrane necks are also essential for the remodeling of membrane topology via membrane fission and fusion. Neck fission can be induced by fine-tuning of membrane curvature, which leads to the controlled division of giant vesicles, and by adhesion-induced membrane tension as observed for small nanovesicles. Challenges for future research include the interplay of curvature elasticity and membrane tension during membrane fusion and the localization of fission and fusion processes within intramembrane domains.

Molecular Transformation for Self-reproducing Vesicles and Underlying Analysis Methods

Closed bilayer membranes of amphiphiles in water, termed vesicles, represent one of the promising models of primitive cellular compartments. Herein, we reviewed studies on the design and construction of vesicle-based cell models capable of sequential growth and division and their underlying analysis methods. We discussed the potential contribution of these studies to the universal understanding of the chemical/physical logics behind the steady reproduction of cellular membranes.

Vesicle deformation and division induced by flip-flops of lipid molecules

We investigated the deformation of small unilamellar vesicles (SUVs) induced by flip-flops of lipids using coarse-grained molecular dynamics simulations. In the case of single-component SUVs composed of zero spontaneous curvature lipids (ZLs), the flip-flop of ZLs deformed stomatocyte-shaped SUVs into an oblate shape, whereas pear-shaped SUVs were deformed into a prolate shape. These two equilibrium shapes comply with the local minima of elastic energy. In the case of binary vesicles composed of ZLs and negative spontaneous curvature lipids (NLs), the vesicle deformation pathway depended on the initial NL distribution in the bilayer. If the initial difference in the NL concentration between the outer and inner leaflets was small, the flip-flop of ZLs and NLs rapidly deformed pear-shaped SUVs into an equilibrium prolate shape. On the other hand, when NLs were localised in the inner leaflet, the flip-flop of ZLs and NLs deformed pear-shaped SUVs into a limiting shape and then induced vesicle division. Because the flip-flop rate of NLs is much faster than that of ZLs, the total free energy was first relaxed by the flip-flop of NLs and then by that of ZLs. This kinetic effect is responsible for the observed vesicle division induced by flip-flops.

Population-Level Membrane Diversity Triggers Growth and Division of Protocells

To date, multiple mechanisms have been described for the growth and division of model protocells, all of which exploit the lipid dynamics of fatty acids. In some examples, the more heterogeneous aggregate consisting of fatty acid and diacyl phospholipid or fatty acid and peptide grows at the expense of the more homogeneous aggregate containing a restricted set of lipids with similar dynamics. Imbalances between surface area and volume during growth can generate filamentous vesicles, which are typically divided by shear forces. Here, we describe another pathway for growth and division that depends simply on differences in the compositions of fatty acid membranes without additional components. Growth is driven by the thermodynamically favorable mixing of lipids between two populations, i.e., the system as a whole proceeds toward equilibrium. Division is the result of growth-induced curvature. Importantly, growth and division do not require a specific composition of lipids. For example, vesicles made from one type of lipid, e.g., short-chain fatty acids, grow and divide when fed with vesicles consisting of another type of lipid, e.g., long-chain fatty acids, and vice versa. After equilibration, additional rounds of growth and division could potentially proceed by the introduction of compositionally distinct aggregates. Since prebiotic synthesis likely gave rise to mixtures of lipids, the data are consistent with the presence of growing and dividing protocells on the prebiotic Earth.

Budding and Fission of Nanovesicles Induced by Membrane Adsorption of Small Solutes

Membrane budding and fission are essential cellular processes that produce new membrane compartments during cell and organelle division, for intracellular vesicle trafficking as well as during endo- and exocytosis. Such morphological transformations have also been observed for giant lipid vesicles with a size of many micrometers. Here, we report budding and fission processes of lipid nanovesicles with a size below 50 nm. We use coarse-grained molecular dynamics simulations, by which we can visualize the morphological transformations of individual vesicles. The budding and fission processes are induced by low concentrations of small solutes that absorb onto the outer leaflets of the vesicle membranes. In addition to the solute concentration, we identify the solvent conditions as a second key parameter for these processes. For good solvent conditions, the budding of a nanovesicle can be controlled by reducing the vesicle volume for constant solute concentration or by increasing the solute concentration for constant vesicle volume. After the budding process is completed, the budded vesicle consists of two membrane subcompartments which are connected by a closed membrane neck. The budding process is reversible as we demonstrate explicitly by reopening the closed neck. For poor solvent conditions, on the other hand, we observe two unexpected morphological transformations of nanovesicles. Close to the binodal line, at which the aqueous solution undergoes phase separation, the vesicle exhibits recurrent shape changes with closed and open membrane necks, reminiscent of flickering fusion pores (kiss-and-run) as observed for synaptic vesicles. As we approach the binodal line even closer, the recurrent shape changes are truncated by the fission of the membrane neck which leads to the division of the nanovesicle into two daughter vesicles. In this way, our simulations reveal a nanoscale mechanism for the budding and fission of nanovesicles, a mechanism that arises from the interplay between membrane elasticity and solute-mediated membrane adhesion.

The requirement of cellularity for abiogenesis

The history of modern biochemistry started with the cellular theory of life. By putting aside the holistic protoplasmic theory, scientists of the XX century were able to advance the functional classification of cellular components significantly. The cell became the unit of the living. Current theories on the abiogenesis of life must account for a moment in evolution (chemical or biological) when this was not the case. Investigating the role of compartments and membranes along chemical and biotic evolution can lead a more generalised idea of living organisms that is fundamental to advance our efforts in astrobiology, origin of life and artificial life studies. Furthermore, it may provide insights in unexplained evolutionary features such as the lipid divide between Archaea and Eubacteria. By surveying our current understanding of the involvement of compartments in abiogenesis and evolution, the idea of cells as atomistic units of a general theory of biology will be discussed. The aim is not to undermine the validity of the cellular theory of life, but rather to elucidate possible biases with regards to cellularity and the origin of life. An open discussion in these regards could show the inherent limitations of non-cellular compartmentalization that may lead to the necessity of cellular structures to support complex life.

Shape changes and budding of giant vesicles induced by an internal chemical trigger: an interplay between osmosis and pH change

Shape transformation and budding of phospholipid/fatty acid giant hybrid vesicles can be induced by an internal chemical stimulus (pH change) when coupled with an osmotic shock. In particular, an autocatalytic enzymatic reaction set (urea-urease system), confined in the lumen of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/oleic acid (HOA) vesicles, can force the budding of the hosting vesicle, when properly fed by a trans-membrane substrate infusion. Herein, we elucidate the budding mechanism by simulating the shape changes of a vesicle during the enzymatic reaction. The area-difference-elasticity (ADE) theory is thus implemented to minimize the surface elastic energy and obtain the equilibrium shape at different values of the reduced volume and different values of the reduced preferred area difference (Δa0). Simulations, together with control experiments, unambiguously show that to obtain an effective vesicle shape transformation, the osmotic stress and the pH change in the lumen of the vesicle must act in synergy at the same timescale. Osmotic pressure induces a vesicle deflation (volume loss), while the pH change affects the preferred area difference between the outer and the inner membrane leaflets.

Perfusion Chamber for Observing a Liposome-Based Cell Model Prepared by a Water-in-Oil Emulsion Transfer Method

For the construction of a chemical model of contemporary living cells, the so-called water-in-oil emulsion transfer (WOET) method has drawn much attention as one of the promising preparation protocols for cell-sized liposomes encapsulating macromolecules and even micrometer-sized colloidal particles in high yields. Combining the throughput and accuracy of the observation is the key to developing a synthetic approach based on the liposomes prepared by the WOET method. Recent advances in microfluidic technology can provide a solution. By means of surface modification of a poly(dimethylsiloxane)-type microfluidic device integrating size-sorting and trapping modules, here, we enabled a simultaneous direct observation of the liposomes with a narrow size distribution, which were prepared by the WOET method. As a demonstration, we evaluated the variance of encapsulation of polystyrene colloidal particles and water permeability of the cell-sized liposomes prepared by the WOET method in the device. Since the liposomes prepared by the WOET method are useful for constructing cell models with an easy protocol, the current system will lead to a critical development of not only supramolecular chemistry and soft matter physics but also synthetic biology.

Reproduction of vesicles coupled with a vesicle surface-confined enzymatic polymerisation

Molecular assembly systems that have autonomous reproduction and Darwinian evolution abilities can be considered as minimal cell-like systems. Here we demonstrate the reproduction of cell-sized vesicles composed of AOT, i.e., sodium bis-(2-ethylhexyl) sulfosuccinate, coupled with an enzymatic polymerisation reaction occurring on the surface of the vesicles. The particular reaction used is the horseradish peroxidase-catalysed polymerisation of aniline with hydrogen peroxide as oxidant, which yields polyaniline in its emeraldine salt form (PANI-ES). If AOT micelles are added during this polymerisation reaction, the AOT - PANI-ES vesicles interact with the AOT molecules in the external solution and selectively incorporate them in their membrane, which leads to a growth of the vesicles. If the AOT vesicles also contain cholesterol, the vesicles not only show growth, but also reproduction. An important characteristic of this reproduction system is that the AOT-based vesicles encourage the synthesis of PANI-ES and PANI-ES promotes the growth of AOT vesicles.

Preparation of Monodisperse Giant Unilamellar Anchored Vesicles Using Micropatterned Hydrogel Substrates

Giant unilamellar vesicles (GUVs) are model membrane systems consisting of a single lipid bilayer separating an inner lumen from the outer solution, with dimensions comparable to that of eukaryotic cells. The importance of these biomimetic systems has recently grown with the development of easy and safe methods to assemble GUVs from complex biorelevant compositions. However, size and position control is still a key challenge for GUV formation and manipulation. Here, a gel-assisted formation method is introduced, able to produce arrays of giant unilamellar anchored vesicles (GUAVs) with a predetermined narrow size distribution. The approach based on micropatterned gel substrates of cross-linked poly(N-isopropylacrylamide) allows performing parallel measurements on thousands of immobile unilamellar vesicles. Such power and flexibility will respond to the growing need for developing platforms of biomimetic constructs from cell-sized single bilayers.

Computational Modeling of Realistic Cell Membranes

Cell membranes contain a large variety of lipid types and are crowded with proteins, endowing them with the plasticity needed to fulfill their key roles in cell functioning. The compositional complexity of cellular membranes gives rise to a heterogeneous lateral organization, which is still poorly understood. Computational models, in particular molecular dynamics simulations and related techniques, have provided important insight into the organizational principles of cell membranes over the past decades. Now, we are witnessing a transition from simulations of simpler membrane models to multicomponent systems, culminating in realistic models of an increasing variety of cell types and organelles. Here, we review the state of the art in the field of realistic membrane simulations and discuss the current limitations and challenges ahead.

Different bending models predict different dynamics of sedimenting elastic trumbbells

The main goal of this paper is to examine theoretically and numerically the impact of a chosen bending model on the dynamics of elastic filaments settling in a viscous fluid under gravity at low-Reynolds-number. We use the bead-spring approximation of a filament and the Rotne-Prager mobility matrix to describe hydrodynamic interactions between the beads. We analyze the dynamics of trumbbells, for which bending angles are typically larger than for thin and long filaments. Each trumbbell is made of three beads connected by springs and it exhibits a bending resistance, described by the harmonic or - alternatively - by the 'cosine' (also called the Kratky-Porod) bending models, both often used in the literature. Using the harmonic bending potential, and coupling it to the spring potential by the Young's modulus, we find simple benchmark solutions: stable stationary configurations of a single elastic trumbbell and attraction of two elastic trumbbells towards a periodic long-lasting orbit. As the most significant result of this paper, we show that for very elastic trumbbells at the same initial conditions, the Kratky-Porod bending potential can lead to qualitatively and quantitatively different spurious dynamics, with artificially large bending angles and unrealistic shapes. We point out that for the bead models of an elastic filament, the range of applicability of the Kratky-Porod model might not go beyond bending angles smaller than π/2 for touching beads and beyond an even much lower value for beads well-separated from each other. The existence of stable stationary configurations of elastic trumbbells and a family of periodic oscillations of two elastic trumbbells are very important findings on their own.