From Biowaste to Lab-Bench: Low-Cost Magnetic Iron Oxide Nanoparticles for RNA Extraction and SARS-CoV-2 Diagnostics

The gold standard for diagnostics of SARS-CoV-2 (COVID-19) virus is based on real-time polymerase chain reaction (RT-PCR) using centralized PCR facilities and commercial viral RNA extraction kits. One of the key components of these kits are magnetic beads composed of silica coated magnetic iron oxide (Fe₂O₃ or Fe₃O₄) nanoparticles, needed for the selective extraction of RNA. At the beginning of the pandemic in 2019, due to a high demand across the world there were severe shortages of many reagents and consumables, including these magnetic beads required for testing for SARS-CoV-2. Laboratories needed to source these products elsewhere, preferably at a comparable or lower cost. Here, we describe the development of a simple, low-cost and scalable preparation of magnetic nanoparticles (MNPs) from biowaste and demonstrate their successful application in viral RNA extraction and the detection of COVID-19. These MNPs have a unique nanoplatelet shape with a high surface area, which are beneficial features, expected to provide improved RNA adsorption, better dispersion and processing ability compared with commercial spherical magnetic beads. Their performance in COVID-19 RNA extraction was evaluated in comparison with commercial magnetic beads and the results presented here showed comparable results for high throughput PCR analysis. The presented magnetic nanoplatelets generated from biomass waste are safe, low-cost, simple to produce in large scale and could provide a significantly reduced cost of nucleic acid extraction for SARS-CoV-2 and other DNA and RNA viruses.

Novel Drug and Gene Delivery System and Imaging Agent Based on Marine Diatom Biosilica Nanoparticles

Mesoporous silica nanoparticles (MSNs) have great potential for applications as a drug delivery system (DDS) due to their unique properties such as large pore size, high surface area, biocompatibility, biodegradability, and stable aqueous dispersion. The MSN-mediated DDS can carry chemotherapeutic agents, optical sensors, photothermal agents, short interfering RNA (siRNA), and gene therapeutic agents. The MSN-assisted imaging techniques are applicable in cancer diagnosis. However, their synthesis via a chemical route requires toxic chemicals and is challenging, time-consuming, and energy-intensive, making the process expensive and non-viable. Fortunately, nature has provided a viable alternative material in the form of biosilica from marine resources. In this review, the applications of biosilica nanoparticles synthesized from marine diatoms in the field of drug delivery, biosensing, imaging agents, and regenerative medicine, are highlighted. Insights into the use of biosilica in the field of DDSs are elaborated, with a focus on different strategies to improve the physico-chemical properties with regards to drug loading and release efficiency, targeted delivery, and site-specific binding capacity by surface functionalization. The limitations, as well as the future scope to develop them as potential drug delivery vehicles and imaging agents, in the overall therapeutic management, are discussed.

Microfluidic chips: recent advances, critical strategies in design, applications and future perspectives

Microfluidic chip technology is an emerging tool in the field of biomedical application. Microfluidic chip includes a set of groves or microchannels that are engraved on different materials (glass, silicon, or polymers such as polydimethylsiloxane or PDMS, polymethylmethacrylate or PMMA). The microchannels forming the microfluidic chip are interconnected with each other for desired results. This organization of microchannels trapped into the microfluidic chip is associated with the outside by inputs and outputs penetrating through the chip, as an interface between the macro- and miniature world. With the help of a pump and a chip, microfluidic chip helps to determine the behavioral change of the microfluids. Inside the chip, there are microfluidic channels that permit the processing of the fluid, for example, blending and physicochemical responses. Microfluidic chip has numerous points of interest including lesser time and reagent utilization and alongside this, it can execute numerous activities simultaneously. The miniatured size of the chip fastens the reaction as the surface area increases. It is utilized in different biomedical applications such as food safety sensing, peptide analysis, tissue engineering, medical diagnosis, DNA purification, PCR activity, pregnancy, and glucose estimation. In the present study, the design of various microfluidic chips has been discussed along with their biomedical applications.

Recent Advances of Microfluidic Platforms for Controlled Drug Delivery in Nanomedicine

Nanomedicine drug delivery systems hold great potential for the therapy of many diseases, especially cancer. However, the controlled drug delivery systems of nanomedicine bring many challenges to clinical practice. These difficulties can be attributed to the high batch-to-batch variations and insufficient production rate of traditional preparation methods, as well as a lack of technology for fast screening of nanoparticulate drug delivery structures with high correlation to in vivo tests. These problems may be addressed through microfluidic technology. Microfluidics, for example, can not only produce nanoparticles in a well-controlled, reproducible, and high-throughput manner, but it can also continuously create three-dimensional environments to mimic physiological and/or pathological processes. This overview gives a top-level view of the microfluidic devices advanced to put together nanoparticulate drug delivery systems, including drug nanosuspensions, polymer nanoparticles, polyplexes, structured nanoparticles and therapeutic nanoparticles. Additionally, highlighting the current advances of microfluidic systems in fabricating the more and more practical fashions of the in vitro milieus for fast screening of nanoparticles was reviewed. Overall, microfluidic technology provides a promising technique to boost the scientific delivery of nanomedicine and nanoparticulate drug delivery systems. Nonetheless, digital microfluidics with droplets and liquid marbles is the answer to the problems of cumbersome external structures, in addition to the rather big pattern volume. As the latest work is best at the proof-of-idea of liquid-marble-primarily based on totally virtual microfluidics, computerized structures for developing liquid marble, and the controlled manipulation of liquid marble, including coalescence and splitting, are areas of interest for bringing this platform toward realistic use.

Microfluidics for Drug Development: From Synthesis to Evaluation

Drug development is a long process whose main content includes drug synthesis, drug delivery, and drug evaluation. Compared with conventional drug development procedures, microfluidics has emerged as a revolutionary technology in that it offers a miniaturized and highly controllable environment for bio(chemical) reactions to take place. It is also compatible with analytical strategies to implement integrated and high-throughput screening and evaluations. In this review, we provide a comprehensive summary of the entire microfluidics-based drug development system, from drug synthesis to drug evaluation. The challenges in the current status and the prospects for future development are also discussed. We believe that this review will promote communications throughout diversified scientific and engineering communities that will continue contributing to this burgeoning field.

Microfluidic Synthesis, Control, and Sensing of Magnetic Nanoparticles: A Review

Magnetic nanoparticles have attracted significant attention in various disciplines, including engineering and medicine. Microfluidic chips and lab-on-a-chip devices, with precise control over small volumes of fluids and tiny particles, are appropriate tools for the synthesis, manipulation, and evaluation of nanoparticles. Moreover, the controllability and automation offered by the microfluidic chips in combination with the unique capabilities of the magnetic nanoparticles and their ability to be remotely controlled and detected, have recently provided tremendous advances in biotechnology. In particular, microfluidic chips with magnetic nanoparticles serve as sensitive, high throughput, and portable devices for contactless detecting and manipulating DNAs, RNAs, living cells, and viruses. In this work, we review recent fundamental advances in the field with a focus on biomedical applications. First, we study novel microfluidic-based methods in synthesizing magnetic nanoparticles as well as microparticles encapsulating them. We review both continues-flow and droplet-based microreactors, including the ones based on the cross-flow, co-flow, and flow-focusing methods. Then, we investigate the microfluidic-based methods for manipulating tiny magnetic particles. These manipulation techniques include the ones based on external magnets, embedded micro-coils, and magnetic thin films. Finally, we review techniques invented for the detection and magnetic measurement of magnetic nanoparticles and magnetically labeled bioparticles. We include the advances in anisotropic magnetoresistive, giant magnetoresistive, tunneling magnetoresistive, and magnetorelaxometry sensors. Overall, this review covers a wide range of the field uniquely and provides essential information for designing "lab-on-a-chip" systems for synthesizing magnetic nanoparticles, labeling bioparticles with them, and sorting and detecting them on a single chip.

Diatoms with Invaluable Applications in Nanotechnology, Biotechnology, and Biomedicine: Recent Advances

Diatoms are unicellular microalga found in soil and almost every aquatic environment (marine and fresh water). Biogenic silica and diatoms are attractive for biotechnological and industrial applications, especially in the field of biomedicine, industrial/synthetic manufacturing processes, and biomedical/pharmaceutical sciences. Deposition of silica by diatoms allows them to create micro- or nanoscale structures which may be utilized in nanomedicine and especially in drug/gene delivery. Diatoms with their unique architectures, good thermal stability, suitable surface area, simple chemical functionalization/modification procedures, ease of genetic manipulations, optical/photonic characteristics, mechanical resistance, and eco-friendliness, can be utilized as smart delivery platforms. The micro- to nanoscale properties of the diatom frustules have garnered a great deal of attention for their application in diverse areas of nanotechnology and biotechnology, such as bioimaging/biosensing, biosensors, drug/gene delivery, photodynamic therapy, microfluidics, biophotonics, solar cells, and molecular filtrations. Additionally, the genetically engineered diatom microalgae-derived nanoporous biosilica have enabled the targeted anticancer drug delivery to neuroblastoma and B-lymphoma cells as well as the mouse xenograft model of neuroblastoma. In this perspective, current trends and recent advances related to the applications of diatoms for the synthesis of nanoparticles, gene/drug delivery, biosensing determinations, biofuel production, and remediation of heavy metals are deliberated, including the underlying significant challenges and future perspectives.

Mini-Review: Potential of Diatom-Derived Silica for Biomedical Applications

Diatoms are unicellular eukaryotic microalgae widely distributed in aquatic environments, possessing a porous silica cell wall known as frustule. Diatom frustules are considered as a sustainable source for several industrial applications because of their high biocompatibility and the easiness of surface functionalisation, which make frustules suitable for regenerative medicine and as drug carriers. Frustules are made of hydrated silica, and can be extracted and purified both from living and fossil diatoms using acid treatments or high temperatures. Biosilica frustules have proved to be suitable for biomedical applications, but, unfortunately, they are not officially recognised as safe by governmental food and medical agencies yet. In the present review, we highlight the frustule formation process, the most common purification techniques, as well as advantages and bottlenecks related to the employment of diatom-derived silica for medical purposes, suggesting possible solutions for a large-scale biosilica production.

Microbial Fabricated Nanosystems: Applications in Drug Delivery and Targeting

The emergence of nanosystems for different biomedical and drug delivery applications has drawn the attention of researchers worldwide. The likeness of microorganisms including bacteria, yeast, algae, fungi, and even viruses toward metals is well-known. Higher tolerance to toxic metals has opened up new avenues of designing microbial fabricated nanomaterials. Their synthesis, characterization and applications in bioremediation, biomineralization, and as a chelating agent has been well-documented and reviewed. Further, these materials, due to their ability to get functionalized, can also be used as theranostics i.e., both therapeutic as well as diagnostic agents in a single unit. Current article attempts to focus particularly on the application of such microbially derived nanoformulations as a drug delivery and targeting agent. Besides metal-based nanoparticles, there is enough evidence wherein nanoparticles have been formulated using only the organic component of microorganisms. Enzymes, peptides, polysaccharides, polyhydroxyalkanoate (PHA), poly-(amino acids) are amongst the most used biomolecules for guiding crystal growth and as a capping/reducing agent in the fabrication of nanoparticles. This has promulgated the idea of complete green chemistry biosynthesis of nano-organics that are most sought after in terms of their biocompatibility and bioavailability.

Microfluidic assembly of pomegranate-like hierarchical microspheres for efflux regulation in oral drug delivery

Herein, a multi-functional nano-in-micro hierarchical microsphere system is demonstrated for controlling the intestinal efflux pumps that affect the oral bioavailability of many therapeutic drugs. The hierarchical particles were generated by a co-flow microfluidic device and consisted of porous silica nanoparticles packed in Eudragit® polymeric matrix. Meropenem (MER), a last-resort antibacterial drug, was loaded into porous silica (MCM-48) with a loading capacity of 34.3 wt%. In this unique materials combination, MCM-48 enables ultrahigh loading of a hydrophilic MER, while the Eudragit® polymers not only protect MER from gastric pH but also act as an antagonist for p-glycoprotein protein efflux pumps to reduce the efflux of MER back into the gastrointestinal lumen. We investigated the in-vitro temporal MER release and bidirectional (absorptive and secretory) drug permeation model across the Caco-2 monolayer. The bioavailability of MER was significantly improved by all of the prepared formulations (i.e. increased absorptive transport and reduced secretory transport). The Eudragit® RSPO formulated MER-MCM showed the best performance with an efflux ratio (i.e. secretory transport/absorptive transport) of 0.35, which is 7.4 folds less than pure MER (2.62). Lastly, the prepared formulations were able to retain the antibacterial activity of MER against Staphylococcus aureus and Pseudomonas aeruginosa. STATEMENT OF SIGNIFICANCE: Meropenem (MER) is a last resort antibiotic used for the treatment of drug-resistant and acute infections and only available as intravenous injectable dosage due to its poor chemical and thermal stability, and ultra-poor oral bioavailability because of the efflux action of P-glycoprotein (P-gp) pumps. Multifunctional colloidal micro/nanoparticles can help to solve these issues. Herein, we designed pomegranate-like hierarchical microspheres comprised of porous silica nanoparticles and enteric Eudragit® polymers (Eudragit®S100, Eudragit®RSPO, and Eudragit®RS100) using a co-flow microfluidic device. Our formulations allow for ultrahigh loading of hydrophilic MER, protects MER from gastric pH, and also block P-gp efflux pumps for enhanced MER permeation/retention with Eudragit®RSPO - showing 13.9-folds higher permeation and 7.4-folds reduction in efflux ratio in a bi-directional Caco-2 monolayer culture system.

Recent advances in the design of microfluidic technologies for the manufacture of drug releasing particles

Drug releasing particles are valued for their ability to deliver therapeutics to targeted locations and for their controllable release patterns. The development of microfluidic technologies, which are designed specifically to manipulate small amounts of fluids, to manufacture particles for drug delivery applications reflects a recent trend due to the advantages they confer in terms of control over particle size and material composition. This review takes a comprehensive look at the different types of microfluidic devices used to fabricate such particles from different types of biomaterials, and at how the on-chip features enable the production of particles with different types of properties. The review concludes by suggesting avenues for future work that will enable these technologies to fulfill their potential and be used in industrial settings for the manufacture of drug releasing particles with unique capabilities.

Anticancer Compounds Derived from Marine Diatoms

Cancer is the main cause of death worldwide, so the discovery of new and effective therapeutic agents must be urgently addressed. Diatoms are rich in minerals and secondary metabolites such as saturated and unsaturated fatty acids, esters, acyl lipids, sterols, proteins, and flavonoids. These bioactive compounds have been reported as potent anti-cancer, anti-oxidant and anti-bacterial agents. Diatoms are unicellular photosynthetic organisms, which are important in the biogeochemical circulation of silica, nitrogen, and carbon, attributable to their short growth-cycle and high yield. The biosilica of diatoms is potentially effective as a carrier for targeted drug delivery in cancer therapy due to its high surface area, nano-porosity, bio-compatibility, and bio-degradability. In vivo studies have shown no significant symptoms of tissue damage in animal models, suggesting the suitability of a diatoms-based system as a safe nanocarrier in nano-medicine applications. This review presents an overview of diatoms' microalgae possessing anti-cancer activities and the potential role of the diatoms and biosilica in the delivery of anticancer drugs. Diatoms-based antibodies and vitamin B12 as drug carriers are also elaborated.

Efficient photoacoustic imaging using indocyanine green (ICG) loaded functionalized mesoporous silica nanoparticles

Photoacoustic (PA) imaging is gaining momentum due to its greater depth of field, low background, and 3D imaging capabilities. However, traditional PA imaging agents (e.g. dyes, quantum dots, etc.) are usually unstable in plasma and bind to serum proteins, and thus cleared rapidly. Because of this, the nanoparticle encapsulation of PA imaging agents is becoming increasingly popular. Therefore, the rational design of carrier nanoparticles for this purpose is necessary for strong imaging signal intensity, high biosafety, and precise targeting. Herein, we systematically evaluate the influence of the chemical and physical surface functionalization of mesoporous silica nanoparticles (MSNs) on the photo-stability, loading, release, and photoacoustic (PA) signal strength of the FDA approved small molecule contrast agent, indocyanine green (ICG). Chemical functionalization involved the modification of MSNs with silanes having amine (NH2) or phosphonate (PO3) terminal groups, whereas physical modifications were performed by capping the ICG loaded MSNs with lipid bilayer (LB) or layer-by-layer (LBL) polyelectrolyte coatings. The NH2-MSNs display the highest ICG mass loading capacity (16.5 wt%) with a limited release of ICG (5%) in PBS over 48 h, while PO3-MSNs only loaded ICG around 3.5 wt%. The physically modified MSNs (i.e. LBMSNs and LBLMSNs) were vacuum loaded resulting in approximately 9 wt% loading and less than 10% ICG release in 48 h. Pure ICG was highly photo-unstable and showed 20% reduction in photoluminescence (PL) within 3 h of exposure to 800 nm, while the ICG loaded onto functionalized MSNs did not photo-degrade. Among the tested formulations, NH2-MSNs and LBLMSNs presented 4-fold in vitro PA signal intensity enhancement at a 200 μg mL-1 equivalent ICG dose. Similar to the in vitro PA imaging, NH2-MSNs and LBLMSNs performed the best when subcutaneously injected into mouse cadavers with 1.29- and 1.43-fold PA signal enhancement in comparison to the pure ICG, respectively.

Microfluidic-Assisted Preparation of 5-Fluorouracil-Loaded PLGA Nanoparticles as a Potential System for Colorectal Cancer Therapy

This work aims at fabricating 5-fluorouracil (5-FU)-loaded poly (lactic-co-glycolic) acid nanoparticles (PLGA NPs) using a microfluidic (MF) technique, with potential for use in colorectal cancer therapy. In order to achieve 5-FU-loaded NPs with an average diameter of approximately 119 nm, the parameters of MF process with fork-shaped patterns were adjusted as follows: the ratio of polymer to drug solutions flow rates was equal to 10 and the solution concentrations of PLGA as carrier, 5-FU as anti-cancer drug and poly (vinyl alcohol) (PVA) as surfactant were 0.2 (% w/v), 0.01 (% w/v) and 0.15 (% w/v), respectively. In this way, a drug encapsulation efficiency of approximately 95% into the PLGA NPs was obtained, due to the formation of a hydrodynamic flow focusing phenomenon through the MF chip. A performance evaluation of the NP samples in terms of the drug release, cytotoxicity and cell death was carried out. Finally, by analyzing the results after induction of cell death and 4', 6-diamidino-2-phenylin-dole (DAPI) staining, MF-fabricated NPs containing 5-FU [0.2 (% w/v) of PLGA] revealed the dead cell amounts of 10 and 1.5-fold higher than the control sample for Caco2 and SW-480, respectively.

Recent developments on zinc(ii) metal-organic framework nanocarriers for physiological pH-responsive drug delivery

The high storage capacities and excellent biocompatibilities of zinc(ii) metal-organic frameworks (Zn-MOFs) have made them outstanding candidates as drug delivery carriers. Recent studies on the pH-responsive processes based on carrier-drug interactions have proven them to be the most efficient and effective way to control the release profiles of drugs. To satisfy the ever-growing demand in cancer therapy, great efforts are being devoted to the development of methods to precisely control drug release and achieve targeted use of an active substance at the right time and place. In this review article, we discuss the diverse stimuli based on Zn-MOFs carriers that have been achieved upon external activation from single pH-stimulus-responsive or/and multiple pH-stimuli-responsive viewpoints. Also, the perspectives and future challenges in this type of carrier system are discussed.

Selective drug-free cancer apoptosis by three-dimensional self-targeting magnetic nickel oxide nanomatrix

AIM

To develop a drug-free strategy addressing limitations of current cancer therapy.

MATERIALS & METHODS

A 3D self-assembled magnetic nickel oxide (NiO) nanomatrix is synthesized using femtosecond pulsed laser to mimic extracellular matrix.

RESULTS

The tunable laser pulse-interaction time and repetition rate aided in generating programmable NiO nanomatrix chemistry. The nanomatrix mimicked extracellular matrix in physical configuration and properties presenting favorable cues to cancerous HeLa cell and fibroblast cell adhesion and proliferation without cytotoxicity. The 3D nanomatrix structure altered HeLa cell behavior and induced apoptosis cancer apoptosis with an evidence of increased endocytosis when compared with fibroblast cells.

CONCLUSION

The results demonstrate the availability of new potential avenues for magnetic drug-free cancer therapeutics.

Diatom Silica for Biomedical Applications: Recent Progress and Advances

Diatoms are unicellular photosynthetic algae enclosed in porous 3D nanopatterned silica enclosures called "frustules." The diatom frustules are made from biosilica self-assembled into intricate porous shells that feature unique properties including high specific surface area, biocompatibility, tailorable surface chemistry, thermal stability, and high mechanical and chemical resistance. The ability to cultivate diatoms in artificial environments and their abundant availability of diatom frustules as mineable fossilized mineral deposits (diatomite or diatomaceous earth; DE) make diatom silica a promising natural alternative to synthetic porous silica for a broad range of biomedical, environmental, agricultural, and energy applications. This review article provides a comprehensive and current account of the use of natural DE silica materials in biomedical applications focused mainly on drug delivery with some highlights on biosensing, tissue engineering, and clotting agents. The article also covers some basic physical and chemical aspects of DE material such as purification, surface chemical functionalization, biocompatibility, and cellular uptake that are critical for the development of an efficient drug carrier.

Microfluidic fabrication of microparticles for biomedical applications

Droplet microfluidics offers exquisite control over the flows of multiple fluids in microscale, enabling fabrication of advanced microparticles with precisely tunable structures and compositions in a high throughput manner. The combination of these remarkable features with proper materials and fabrication methods has enabled high efficiency, direct encapsulation of actives in microparticles whose features and functionalities can be well controlled. These microparticles have great potential in a wide range of bio-related applications including drug delivery, cell-laden matrices, biosensors and even as artificial cells. In this review, we briefly summarize the materials, fabrication methods, and microparticle structures produced with droplet microfluidics. We also provide a comprehensive overview of their recent uses in biomedical applications. Finally, we discuss the existing challenges and perspectives to promote the future development of these engineered microparticles.

Morphology- and size-controlled synthesis of a metal-organic framework under ultrasound irradiation: An efficient carrier for pH responsive release of anti-cancer drugs and their applicability for adsorption of amoxicillin from aqueous solution

In this study, we have reported a biocompatible metal-organic framework (MOF) with ultra-high surface area, which we have shown to have uses as both a cancer treatment delivery system and for environmental applications. Using a sonochemical approach, highly flexible organic H₃BTCTB and ditopic 4,4'-BPDC ligands, along with modulators of acetic acid and pyridine were combined to prepare a Zn(II)-based metal-organic framework, DUT-32, [Zn₄O(BPDC)(BTCTB)_4/3(DEF)_39.7(H₂O)_11.3]. Powder X-ray diffraction (PXRD), field-emission scanning electron microscopy (FE-SEM), and Fourier transform infrared spectroscopy (FTIR) were used to characterize, the particle size, shape, and structure of the DUT-32. To show the effects of shape and size of DUT-32 micro/nano-structures on doxorubicin (DOX) drug release and amoxicillin (AMX) adsorption, time of sonication, initial reagent concentrations, irradiation frequency, and acetic acid to pyridine molar ratios were optimized. The drug-loaded DUT-32 was soaked in simulated body fluid (SBF) and the drug release ratio was monitored through release time to perform in vitro drug release test. A slow and sustained release was observed for DUT-32 micro/nano-structures, having a considerable drug loading capacity. At the pH values 7.4-4.5, various profiles of pH-responsive release were achieved. Also, the prepared DUT-32 micro/nano-structures are found to be biocompatible with PC3 (prostate cancer) and HeLa (cervical cancer) cell lines, when tested by MTT assay. Moreover, DUT-32 micro/nano-structures were studied to show AMX adsorption from aqueous solution. Finally, kinetic studies indicated that AMX adsorption and drug release of DOX via this MOF are of first-order kinetics.