On-Demand Sequential Release of Dual Drug from pH-Responsive Electrospun Janus Nanofiber Membranes toward Wound Healing and Infection Control

Drugs against bacteria and abnormal cells, such as antibiotics and anticancer drugs, may save human lives. However, drug resistance is becoming more common in the clinical world. Nowadays, a synergistic action of multiple bioactive compounds and their combination with smart nanoplatforms has been considered an alternative therapeutic strategy to fight drug resistance in multidrug-resistant cancers and microorganisms. The present study reports a one-step fabrication of innovative pH-responsive Janus nanofibers loaded with two active compounds, each in separate polymer compartments for synergistic combination therapy. By dissolving one of the compartments from the nanofibers, we could clearly demonstrate a highly yielded anisotropic Janus structure with two faces by scanning electron microscopy (SEM) analysis. To better understand the distinctive attributes of Janus nanofibers, several analytical methods, such as X-ray diffraction (XRD), FTIR spectroscopy, and contact angle goniometry, were utilized to examine and compare them to those of monolithic nanofibers. Furthermore, a drug release test was conducted in pH 7.4 and 6.0 media since the properties of Janus nanofibers correlate significantly with different environmental pH levels. This resulted in the on-demand sequential codelivery of octenidine (OCT) and curcumin (CUR) to the corresponding pH stimulus. Accordingly, the antibacterial properties of Janus fibers against Escherichia coli and Staphylococcus aureus, tested in a suspension test, were pH-dependent, i.e., greater in pH 6 due to the synergistic action of two active compounds, and Eudragit E100 (EE), and highly satisfactory. The biocompatibility of the Janus fibers was confirmed in selected tests.

Compartmentalized Polyampholyte Microgels by Depletion Flocculation and Coacervation of Nanogels in Emulsion Droplets

In pH-responsive drug carriers, the distribution of charges has been proven to affect delivery efficiency but is difficult to control and verify. Herein, we fabricate polyampholyte nanogel-in-microgel colloids (NiM-C) and show that the arrangement of the nanogels (NG) can easily be manipulated by adapting synthesis conditions. Positively and negatively charged pH-responsive NG are synthesized by precipitation polymerization and labelled with different fluorescent dyes. The obtained NG are integrated into microgel (MG) networks by subsequent inverse emulsion polymerization in droplet-based microfluidics. By confocal laser scanning microscopy (CLSM), we verify that depending on NG concentration, pH value and ionic strength, NiM-C with different NG arrangements are obtained, including Janus-like phase-separation of NG, statistical distribution of NG, and core-shell arrangements. Our approach is a major step towards uptake and release of oppositely charged (drug) molecules.

Multi-material electrospinning: from methods to biomedical applications

Electrospinning as a versatile, simple, and cost-effective method to engineer a variety of micro or nanofibrous materials, has contributed to significant developments in the biomedical field. However, the traditional electrospinning of single material only can produce homogeneous fibrous assemblies with limited functional properties, which oftentimes fails to meet the ever-increasing requirements of biomedical applications. Thus, multi-material electrospinning referring to engineering two or more kinds of materials, has been recently developed to enable the fabrication of diversified complex fibrous structures with advanced performance for greatly promoting biomedical development. This review firstly gives an overview of multi-material electrospinning modalities, with a highlight on their features and accessibility for constructing different complex fibrous structures. A perspective of how multi-material electrospinning opens up new opportunities for specific biomedical applications, i.e., tissue engineering and drug delivery, is also offered.

Distinctive Sandwich-Type Composite Film and Deuterogenic Three-Dimensional Triwall Tubes Affording Concurrent Aeolotropic Conduction, Magnetism, and Up-/Down-Conversion Luminescence

Compared to single functional materials, multifunctional materials with electrical conduction, magnetism, and luminescence are more attractive and promising, so it has become an important subject. A distinctive sandwich-type composite film (STCF) with dual-color up- and down-conversion luminescence, magnetism, and aeolotropic conduction is prepared by layer-by-layer electrospinning technology. Macroscopically, STCF is assembled by three tightly bonded layers, including a [polypyrrole (PPy)/poly(methyl methacrylate) (PMMA)]//[NaYF4:Yb3+, Er3+/PMMA] Janus nanobelt array layer as the first layer, a CoFe2O4/polyacrylonitrile (PAN) nanofiber nonarray layer as the second layer, and a Na2GeF6:Mn4+/polyvinylpyrrolidone (PVP) nanofiber nonarray layer as the third layer. This unique macropartition effectually confines conductive aeolotropy, magnetism, and luminescence in different layers. Microscopically, a Janus nanobelt is used as a construction unit to restrict the luminescent and conductive materials to their microregions, thus achieving highly conductive aeolotropy and green luminescence. The high integration of the micro-subarea and macro-subarea in the STCF can efficaciously avoid the mutual disadvantageous effects among different materials to obtain splendid polyfunctional performance. The conductive anisotropy and magnetism of the STCF can be adjusted by changing the contents of PPy and CoFe2O4. When the PPy content reaches 70%, the conductance ratio in the conductive direction to insulative direction is 108. The 2D STCF can be crimped by four different methods, and the 3D TWTs have the same excellent polyfunctional performances as 2D STCF. This unique design idea and construction technology can be applied to the preparation of other multifunctional materials to avoid harmful interference among various functions.

The High Flux of Superhydrophilic-Superhydrophobic Janus Membrane of cPVA-PVDF/PMMA/GO by Layer-by-Layer Electrospinning for High Efficiency Oil-Water Separation

A simple and novel strategy of superhydrophilic-superhydrophobic Janus membrane was provided here to deal with the increasingly serious oil-water separation problem, which has a very bad impact on environmental pollution and resource recycling. The Janus membrane of cPVA-PVDF/PMMA/GO with opposite hydrophilic and hydrophobic properties was prepared by layer-by-layer electrospinning. The structure of the Janus membrane is as follows: firstly, the mixed solution of polyvinylidene fluoride (PVDF), polymethylmethacrylate (PMMA) and graphene oxide (GO) was electrospun to form a hydrophobic layer, then polyvinyl alcohol (PVA) nanofiber was coated onto the hydrophobic membrane by layer-by-layer electrospinning to form a composite membrane, and finally, the composite membrane was crosslinked to obtain a Janus membrane. The addition of GO can significantly improve the hydrophobicity, mechanical strength and stability of the Janus membrane. In addition, the prepared Janus membrane still maintained good oil-water separation performance and its separation efficiency almost did not decrease after many oil-water separation experiments. The flux in the process of oil-water separation can reach 1909.9 L m-2 h-1, and the separation efficiency can reach 99.9%. This not only proves the separation effect of the nanocomposite membrane, but also shows its high stability and recyclability. The asymmetric Janus membrane shows good oil-water selectivity, which gives Janus membrane broad application prospects in many fields.

Tunable Spun Fiber Constructs in Biomedicine: Influence of Processing Parameters in the Fibers' Architecture

Electrospinning and wet-spinning have been recognized as two of the most efficient and promising techniques for producing polymeric fibrous constructs for a wide range of applications, including optics, electronics, food industry and biomedical applications. They have gained considerable attention in the past few decades because of their unique features and tunable architectures that can mimic desirable biological features, responding more effectively to local demands. In this review, various fiber architectures and configurations, varying from monolayer and core-shell fibers to tri-axial, porous, multilayer, side-by-side and helical fibers, are discussed, highlighting the influence of processing parameters in the final constructs. Additionally, the envisaged biomedical purposes for the examined fiber architectures, mainly focused on drug delivery and tissue engineering applications, are explored at great length.

Anisotropic Janus materials: from micro-/nanostructures to applications

Janus materials have led to great achievements in recent years owing to their unique asymmetric structures and properties. In this review, recent advances of Janus materials including Janus particles and Janus membranes are summarized, and then the microstructures and applications of Janus materials are emphasized. The asymmetric wettability of Janus materials is related to their microstructures; hence, the microstructures of Janus materials were analyzed, compared and summarized. Also presented are current and potential applications in sensing, drug delivery, oil-water separation and so on. Finally, a perspective on the research prospects and development of Janus materials in more fields is given.

Novel photosensitive dual-anisotropic conductive Janus film endued with magnetic-luminescent properties and derivative 3D structures

A new photosensitive dual-anisotropic conductive Janus film (PDCJF) is proposed for the first time. It is rationally designed and manufactured by facile electrospinning. PDCJF is firstly constructed using 2,7-dibromo-9-fluorenone (DBF) with photoconductive and luminescent properties. Janus nanofibers are respectively used as the building units to construct the top layer (T-PDCJF) and the bottom layer (B-PDCJF) of PDCJF. The two layers are tightly bonded to form PDCJF. Under light irradiation, there is photosensitive dual-anisotropic conduction in PDCJF, but there is no anisotropic conduction without light. Thus, the transition of PDCJF from mono-functional magnetism to tri-functionalities is realized under light and without light. The luminescence color of PDCJF is tunable and it emits white-light. This is made possible by modulating the amounts of luminescent substances and excitation wavelength. The microscopic Janus nanofibers used as building units and macroscopic Janus film structure ensure high photosensitive dual-anisotropic conduction and excellent fluorescence in PDCJF. The two-dimensional (2D) PDCJF is rolled to obtain three-dimensional (3D) Janus-type tubes and 2D plus 3D complete flag-like structures with exceptional multi-functionalities. The new findings can strongly guide in developing advanced multi-functional nanostructures.

Electrospinning for healthcare: recent advancements

This perspective explores recent developments and innovations in the electrospinning technique and their potential applications in biomedicine.

Structural design toward functional materials by electrospinning: A review

Electrospinning as one of the most versatile technologies have attracted a lot of scientists’ interests in past decades due to its great diversity of fabricating nanofibers featuring high aspect ratio, large specific surface area, flexibility, structural abundance, and surface functionality. Remarkable progress has been made in terms of the versatile structures of electrospun fibers and great functionalities to enable a broad spectrum of applications. In this article, the electrospun fibers with different structures and their applications are reviewed. First, several kinds of electrospun fibers with different structures are presented. Then the applications of various structural electrospun fibers in different fields, including catalysis, drug release, batteries, and supercapacitors, are reviewed. Finally, the application prospect and main challenges of electrospun fibers are discussed. We hope that this review will provide readers with a comprehensive understanding of the structural design and applications of electrospun fibers in different fields.

Utilizing modules of different functions to construct a Janus-type membrane and derivative 3D Janus-type tube displaying synchronous trifunction of conductive aeolotropism, magnetism and luminescence

The microstructures and macrostructures play a crucial role in the properties and applications of multifunctional materials. Herein, microscopic partition and macroscopic partition are combined by devising and preparing different modules that can be elaborately devised to possess specific performances. A two-dimensional (2D) 3-module Janus-type membrane multifunctionalized by conductive aeolotropism, magnetism and luminescence (defined as 3M-CML Janus-type membrane) is constructed via electro-spinning. The modular structure of 3M-CML Janus-type membrane is obtained by devising and constructing three different modules, including luminescence module (denoted as L module), conductive aeolotropism-luminescence module (marked as C-L module) and magnetism-luminescence module (named as M-L module). The results prove that almost no mutual detrimental influences exist among different modules owing to the macroscopic modular structure and Janus-type structure, which effectively avoids the negative interactions among different materials. Tb(BA)₃phen/PVP nanofiber, [PMMA/Eu(BA)₃phen]//[PMMA/PANI] Janus-type nanoribbon and [PMMA/Tb(BA)₃phen]//[PMMA/Fe₃O₄] Janus-type nanoribbon are, respectively, selected as building units of the three modules, which further prevents the negative interactions among different materials and improves the versatility of 3M-CML Janus-type membrane. The luminescence, adjustable conductive aeolotropism and variable magnetism of 3M-CML Janus-type membrane are systematically discussed. Meanwhile, novel flexible four types of brand-new three-dimensional (3D) Janus-type tubes are obtained by rolling modularly devised 2D 3M-CML Janus-type membrane with different rolling schemes. As derivatives of the 2D 3M-CML Janus-type membranes, macroscopic 3D Janus-types tubes exhibit similar performances to 2D 3M-CML Janus-type membranes. The 2D Janus-type membrane and 3D Janus-type tube will have momentous applications in flexible electronics and nanodevices in the future.

Electrospun Fe2C-loaded carbon nanofibers as efficient electrocatalysts for oxygen reduction reaction

Carbon-based non-precious metal catalysts have been regarded as the most promising alternatives to the state-of-art Pt/C catalyst for the oxygen reduction reaction (ORR). However, there are still some unresolved challenges such as agglomeration of nanoparticles, complex preparation process and low production efficiency, which severely hamper the large-scale production of non-precious metal catalysts. Herein, a novel carbon-based non-precious metal catalyst, i.e. iron carbide nanoparticles embedded on carbon nanofibers (Fe₂C/CNFs), prepared via the direct pyrolysis of carbon- and iron-containing Janus fibrous precursors obtained by electrospinning. The Fe₂C/CNF catalyst shows uniform dispersion and narrow size distribution of Fe₂C nanoparticles embedded on the CNFs. The obtained catalyst exhibits positive onset potential (0.87 V versus RHE), large kinetic current density (1.9 mA cm^-2), and nearly follows the effective four-electron route, suggesting an outstanding electrocatalytic activity for the ORR in 0.1 M of KOH solution. Besides, its stability is better than that of the commercial Pt/C catalyst, due to the strong binding force between Fe₂C particles and CNFs. This strategy opens new avenues for the design and efficient production of promising electrocatalysts for the ORR.

Conductive Bicomponent Fibers Containing Polyaniline Produced via Side-by-Side Electrospinning

In this study, using a barbed Y-connector as the spinneret, camphoric acid (CSA) doped polyaniline (PANI) and polyethylene oxide (PEO) were electrospun into side-by-side bicomponent fibers. Fiber mats obtained from this side-by-side spinneret were compared with those mats electrospun from blended PEO and PANI in terms of fiber morphology, electrical conductivity, thermal stability, mechanical properties, and relative resistivity under tensile strain. The influence of different content ratio of insulating PEO (3/4/5 w/v% to solvent) and conductive PANI-CSA (1.5/2.5/3.5 w/v% to solvent) on the abovementioned properties was studied as well. Results showed that this side-by-side spinning was capable of overcoming the poor spinnability of PANI to produce fibers with PEO carrying PANI on the surface of the bicomponent fibers, which demonstrated higher electrical conductivity than blends. Although the addition of PANI deteriorated mechanical properties for both side-by-side and blended fibers when compared to the pure PEO fibers, the side-by-side fibers showed much better fiber strength and elongation than blends. In addition, the superior ductility and decent relative electrical resistivity of the side-by-side fibers imparted them great potential for flexible sensor applications.

Structures, Properties, and Performances-Relationships of Polymeric Membranes for Pervaporative Desalination

For the fulfilment of increasing global demand and associated challenges related to the supply of clean-and-safe water, PV has been considered as one of the most attractive and promising areas in desalinating salty-water of varied salinities. In pervaporative desalination, the sustainability, endurance, and structural features of membrane, along with operating parameters, play the dominant roles and impart paramount impact in governing the overall PV efficiency. Indeed, polymeric- and organic-membranes suffer from several drawbacks, including inferior structural stability and durability, whereas the fabrication of purely inorganic membranes is complicated and costly. Therefore, recent development on the high-performance and cost-friendly PV membrane is mostly concentrated on synthesizing composite- and NCP-membranes possessing the advantages of both organic- and inorganic-membranes. This review reflects the insights into the physicochemical properties and fabrication approaches of different classes of PV membranes, especially composite- and NCP-membranes. The mass transport mechanisms interrelated to the specialized structural features have been discussed. Additionally, the performance potential and application prospects of these membranes in a wide spectrum of desalination and wastewater treatment have been elaborated. Finally, the challenges and future perspectives have been identified in developing and scaling up different high-performance membranes suitable for broader commercial applications.

Wearable and Stretchable Triboelectric Nanogenerator Based on Crumpled Nanofibrous Membranes

Triboelectric nanogenerator could efficaciously harvest the mechanical energy that come from the ambient environment, which has become a research hotspot in the sphere of wearable electronic technology. Here, a self-powered and highly stretchable single-electrode triboelectric nanogenerator with an undulating three-dimensional surface crumpled structure is reported. The triboelectric nanogenerator has a multilayer structure with a crumpled nanofiber membrane as the triboelectric material. Due to the materials and structural innovations, the triboelectric nanogenerator possesses outstanding electric output stability and stretchability. It could subtly transform the unstretched flexible nanofiber membrane into a stretchable material, while overcoming the deficiency that the nanofiber membrane has a tendency to be delaminated from the electrode layer during long-term operation. Utilizing the triboelectric nanogenerator directly attached to human skin could efficaciously harvest the ignored mechanical energy that come from our daily activities.

Fabrication of Electrospun Polymer Nanofibers with Diverse Morphologies

Fiber structures with nanoscale diameters offer many fascinating features, such as excellent mechanical properties and high specific surface areas, making them attractive for many applications. Among a variety of technologies for preparing nanofibers, electrospinning is rapidly evolving into a simple process, which is capable of forming diverse morphologies due to its flexibility, functionality, and simplicity. In such review, more emphasis is put on the construction of polymer nanofiber structures and their potential applications. Other issues of electrospinning device, mechanism, and prospects, are also discussed. Specifically, by carefully regulating the operating condition, modifying needle device, optimizing properties of the polymer solutions, some unique structures of core⁻shell, side-by-side, multilayer, hollow interior, and high porosity can be obtained. Taken together, these well-organized polymer nanofibers can be of great interest in biomedicine, nutrition, bioengineering, pharmaceutics, and healthcare applications.

Flexible sandwich-shaped composite film with simultaneous double electrically conductive anisotropy, magnetism and dual-color fluorescence

Flexible sandwich-shaped composite film with simultaneous double electrically conductive anisotropy, magnetism and dual-color fluorescence was successfully constructed via electrospinning.

High-performance sulfosuccinic acid cross-linked PVA composite pervaporation membrane for desalination

Pervaperation (PV), as a novel technology, has shown great promise in fresh water production from salty water. However, the low water flux of the present membranes hinders their practical applications. Here, a new type of PV composite membrane, consisting of a selective skin layer fabricated from poly(vinyl alcohol) (PVA) cross-linked by sulfosuccinic acid and a porous support layer using a commercial polyacrylonitrile (PAN) ultrafiltration membrane, was developed for applications in desalination. The separation performance of S-PVA/PAN composite PV membranes with different S-PVA layer thicknesses was tested in detail. The best result showed a water flux of 27.9 kg m^-2 h^-1 with a salt rejection of 99.8%, which was obtained at a vacuum of 100 Pa and temperature of 70°C when separating a 35,000 ppm NaCl solution. The S-PVA/PAN composite membranes could also be used for the desalination of high-concentration (100,000 ppm) NaCl solutions with a water flux of 11.2 kg m^-2 h^-1 with a salt rejection of 99.8%. Moreover, a stable desalination performance was obtained for a 120 h operation time. This study shows the possibility of using PV in desalination applications for seawater, brackish water and reverse osmosis concentrate treatment.

Janus nanofiber array pellicle: facile conjugate electrospinning construction, structure and bifunctionality of enhanced green fluorescence and adjustable magnetism

A [Fe₃O₄/polyvinyl pyrrolidone (PVP)]//[Tb(BA)₃phen/PVP] Janus nanofiber array pellicle (denoted JNAP) was successfully constructed by facile conjugate electrospinning without twisting for the first time. The JNAP offers the dual-functionality of fluorescence and magnetism. This technology entirely solves the dilemma of the magnetic spinning dope and fluorescent spinning dope being easily mixed together during the parallel electrospinning process, as it achieves complete segregation of magnetic nanoparticles and fluorescent molecules. Moreover, conjugate electrospinning without twisting has fewer requirements on the viscosity of the spinning dope compared with parallel electrospinning, in which the two spinning dopes should have the same viscosity. It was satisfactorily found that the JNAP has higher fluorescence intensity than the corresponding non-aligned Janus nanofiber pellicle. The magnetism of the JNAP could be tailored by changing the doping amount of the Fe₃O₄ NPs. The JNAP has potential applications in nanotechnology and biomedicine, etc., due to its enhanced green fluorescence and adjustable magnetism. In addition, this design concept and manufacturing process provide a facile way for preparing other one-dimensional Janus nanomaterials with multifunctionality.

A [Fe₃O₄/PVP]//[Tb(BA)₃phen/PVP] Janus nanofiber array pellicle with enhanced green fluorescence and adjustable magnetism dual-functionality was constructed via facile conjugate electrospinning.

Electrospun Janus-like pellicle displays coinstantaneous tri-function of aeolotropic conduction, magnetism and luminescence

A new Janus-like pellicle with top-bottom structure, functionalized by conductive aeolotropism, magnetism and luminescence (defined as a CML Janus-like pellicle), is conceived and constructed via electrospinning by combining microcosmic with macroscopic partitions. [PANI/PMMA]//[Eu(BA)₃phen/PMMA] and [Fe₃O₄/PMMA]//[Tb(BA)₃phen/PMMA] Janus-like microribbons are selected as building units to construct a conductive aeolotropism-luminescence layer (CL layer) and magnetism-luminescence layer (ML layer), and the two layers are combined to form a CML Janus-like pellicle. Macroscopic partition is achieved by designing the Janus-like structure of the pellicle, while Janus-like microribbons are used for the microcosmic partition by separating rare earth luminescent compounds from dark-colored magnetic Fe₃O₄ NPs and conductive PANI. The CML Janus-like pellicle has stronger luminescence compared to the contrast samples. The magnetism of the CML Janus-like pellicle can be adjusted by changing the doping amount of Fe₃O₄ NPs. The CML Janus-like pellicle can achieve a strong and variable conductive aeolotropism via changing the doping amount of PANI and the highest conductive aeolotropism ratio can reach ca. 10⁸ times when the PANI content is 70%. Microcosmic and macroscopic partitions are simultaneously integrated into the CML Janus-like pellicle, which results in almost no detrimental mutual influences between the two layers, and the overall performances of the CML Janus-like pellicle are greatly improved.

Janus-like pellicle with conductive aeolotropism, magnetism and luminescence is designed and constructed via electrospinning by combining microcosmic with macroscopic partitions.

An NIR-triggered drug release and highly efficient photodynamic therapy from PCL/PNIPAm/porphyrin modified graphene oxide nanoparticles with the Janus morphology

This project aimed to investigate the synthesis and characteristics of stimuli-responsive nanoparticles with different morphologies. In the first step, graphene oxide was synthesized based on the improved Hummers' method. Then, thermo-responsive poly(N-isopropylacrylamide-co-N-(hydroxymethyl)acrylamide), an amphiphilic copolymer, and poly(caprolactone) (PCL), a hydrophobic polymer, were used to prepare Janus and mixed graphene oxide-based nanoparticles. Fluorescence microscopy was utilized to confirm the Janus structure by labeling the mixed and Janus NPs with fluorescent hydrophobic and hydrophilic dyes via a solvent-evaporation method. Then, terminally modified carboxyl porphyrin (TPPC3-COOH), used as the second generation photosensitizer, was grafted to the copolymer surrounding the mixed and Janus NPs. Next, quercetin, a hydrophobic anti-cancer drug, was loaded onto both NPs to accomplish NIR-triggered photodynamic- and chemo-therapy. Finally, the drug loading, encapsulation efficiency, and in vitro release of thermo-responsive NPs were investigated at temperatures of 37 °C and 40 °C as well as under laser irradiation (808 nm).

This project aimed to investigate the synthesis and characteristics of stimuli-responsive nanoparticles with different morphologies.

Engineering of Nanofibrous Amorphous and Crystalline Solid Dispersions for Oral Drug Delivery

Poor aqueous solubility (<0.1 mg/mL) affects a significant number of drugs currently on the market or under development. Several formulation strategies including salt formation, particle size reduction, and solid dispersion approaches have been employed with varied success. In this review, we focus primarily on the emerging trends in the generation of amorphous and micro/nano-crystalline solid dispersions using electrospinning to improve the dissolution rate and in turn the bioavailability of poorly water-soluble drugs. Electrospinning is a simple but versatile process that utilizes electrostatic forces to generate polymeric fibers and has been used for over 100 years to generate synthetic fibers. We discuss the various electrospinning studies and spinneret types that have been used to generate amorphous and crystalline solid dispersions.

Novel ZnO/NiO Janus-like nanofibers for effective photocatalytic degradation

In recent years, Janus materials have become a research hotspot in the field of materials science; however, fabricating inorganic Janus-like nanofibers (NFs) is still a challenge. Herein, we report novel ZnO/NiO Janus-like NFs with efficient photocatalytic performance via an electrospinning method followed by calcination treatment. The morphology, structure, chemical composition and crystallinity of ZnO/NiO Janus-like NFs were studied in detail via SEM, TEM, HRTEM, EDS, FT-IR, XPS and XRD, indicating that the NFs had a perfect Janus-like structure composed of ZnO and NiO. A series of photocatalytic experiments were carried out in aqueous organic dye solutions under 365 nm UV radiation for 1 h, with the degradation rate of malachite green able to reach 96%, proving that the NFs have great potential in the field of organic dye degradation. Furthermore, a reasonable catalytic mechanism for the ZnO/NiO Janus-like NFs was proposed, which was discussed from the view of electron-hole pairs and p-n junctions. In short, the method in our work is expected to become a new way of effectively preparing functional inorganic Janus-like NFs.

Novel magnetic-fluorescent bifunctional Janus nanofiber membrane

Magnetic-fluorescent bifunctional materials have received global attention owing to their potential in many fields. Herein, we reported a novel magnetic-fluorescent bifunctional Janus nanofiber membrane (NFM) by adding the as-prepared magnetic CoFe₂O₄ nanoparticles into the polyacrylonitrile (PAN) side (m-PAN) and the fluorescent molecules of 1,8-naphthalene anhydride (1,8-NAD) into the polyvinylpyrrolidone (PVP) side (f-PVP) via electrospinning method. The obtained m-PAN/f-PVP Janus NFM exhibited excellent magnetic performance and high fluorescent properties due to the unique structure. Compared with the m-PAN/f-PVP composite NFM, the Janus NFM showed higher fluorescent performance because the fluorescent molecules were isolated from the magnetic nanoparticles. In addition, the Janus NFM not only maintain the good self-supporting state in water but also realize a directional movement attracted by a magnet. The unique structure of Janus nanofiber is of great importance and demonstrates great potential applications.

Novel double anisotropic conductive flexible composite film endued with improved luminescence

Brand-new double anisotropic conductive flexible composite films (ACFs) were firstly put forward, devised and fabricated. The flexible array composite films were constructed via electrospinning using highly aligned Janus nanoribbons as conductive and constitutive units. The Janus nanoribbon consists of two parts, which are respectively conducting side and insulating-luminescent side. The Janus nanoribbons array composite film has two layers, and the two layers are combined tightly to form a top-to-bottom structure. In the composite film, the length direction of the Janus nanoribbons (namely conducting direction) in the two layers is perpendicular, so that a composite film with double electrically conductive anisotropy is achieved. In addition, by adjusting the content of PANI, conductive anisotropy of each layer of the composite film can be tuned, and the conductance in the conducting direction is about 10⁸ times stronger than that in the insulating direction. The Janus nanoribbon array composite films also have tunable and improved luminescent properties, achieving bi-functionality of double anisotropically electrical conduction and luminescence. The proposed design concept and preparation technology will provide theoretical and technical support for the design and fabrication of novel multifunctional ACFs.

Brand-new double anisotropic conductive flexible composite films endued with tuned electrically conductive anisotropy and improved luminescence were prepared by electrospinning.

Assembling exceptionally-structured Janus nanoribbons into a highly anisotropic electrically conductive array film that exhibits red fluorescence and superparamagnetism

Exceptive-structured Janus nanoribbons and their array films demonstrating high conductive anisotropism, improved red fluorescence and superparamagnetism were constructed via electrospinning.

Luminescence carbon dot-based nanofibers for a water-insoluble drug release system and their monitoring of drug release

Drug release systems with fluorescence detection have emerged as a potential application for the biological area of diagnosis and therapy.