Zwitterionic copolymers bearing phosphonate or phosphonic motifs as novel metal-anchorable anti-fouling coatings

An Adhesive/Anti-Adhesive Janus Tissue Patch for Efficient Closure of Bleeding Tissue with Inhibited Postoperative Adhesion

Most of the current bioadhesives cannot perform well on bleeding tissues while postoperative adhesion is a general but serious clinical issue. Here, a three-layer biodegradable Janus tissue patch (J-TP) that is able to simultaneously enable efficient closure of bleeding wounds with significantly promoted clotting ability and suppressed postoperative adhesion of tissues is reported. A dry adhesive hydrogel bottom layer of the J-TP can form rapid (within 15 s) and strong (tensile strength up to 98 kPa) adhesion to bleeding/wet tissues with high bursting pressure (about 312.5 mmHg on a sealed porcine skin) through hydrogen binding and covalent conjugation between the carboxyl & N-hydroxy succinimide (NHS) groups of hydrogel and the primary amine groups of tissues, while the phosphonic motifs can significantly reduce blood loss (by 81% on a rat bleeding liver model) of bleeding wounds. A thin polylactic acid (PLA) middle layer can improve the tensile strength (by 132%) of the J-TP in wet conditions while the grafted zwitterionic polymers can effectively prevent postoperative tissue adhesion and inflammatory reaction. This J-TP may be a promising tissue patch to assist the clinical treatment of injured bleeding tissues with inhibited postoperative adhesion.

Zwitterionic betaines over HEPES as the new generation biocompatible pH buffers for cell culture

Good's buffers have been widely applied in cell/organ culture over the past half a century as biocompatible pH stabilizers. However, the emergence of severe adverse effects, such as cellular uptake, lysosomal autophagic activation, and visible light-induced cytotoxicity, raises serious questions over its biocompatibility while underlying mechanism was unclear. Here we report that riboflavin (RF, component of cell culture medium) generates ¹O₂, ·OH, and O₂ ^•- under visible light exposure during regular cell manipulation. These short half-life reactive oxygen species (ROS) react with tertiary amine groups of HEPES, producing 106.6 μM of H₂O₂. Orders of magnitude elevated half-life of ROS in the medium caused severe cytotoxicity and systematic disorder of normal cell functions. We have further designed and validated zwitterionic betaines as the new generation biocompatible organic pH buffers, which is able to completely avoid the adverse effects that found on HEPES and derivate Good's buffers. These findings may also open a new avenue for zwitterionic betaine based materials for biomedical applications.

Zwitterionic/phosphonate copolymer coatings endow excellent antifouling properties and robust re-mineralization ability of dentine substrates

Inhibition of biofilm formation and induction of the re-mineralization of damaged dental tissues are two major strategies to combat dental hypersensitivity (DH). However, single component synthetic materials normally cannot fulfil these two functions during the repairing of damaged dental tissues. Here, we report zwitterionic phosphorylcholine based polymers to be a new type of dual functional coating for the repairing of DH. Zwitterionic/phosphonate copolymers, p(DEMMP-co-MPC), bearing varied zwitterionic contents (95 and 75 mol%) were prepared through conventional radical copolymerization. ¹H NMR spectroscopy clearly indicated the precise preparation of the copolymers. The copolymers can be easily coated on dentine substrates based on the high affinity between the phosphonate group and the calcium phosphate minerals of the dentine substrates, as evidenced by XPS and water contact angle measurements. Antifouling evaluations indicated that zwitterionic coating can efficiently inhibit protein adsorption (BSA, egg white, and milk, by 85%) and bacterial adhesion (by 97.1%) on dentine substrates. Furthermore, in vitro and in vivo experiments consistently indicated that the zwitterionic coating could not only induce the robust re-mineralization of dentine surfaces, but also template the extensive re-mineralization of dentine tubules to a similar level of pristine dentine. Both the antifouling properties and the re-mineralization potency are positively correlated with the content of zwitterionic pMPC in the coating copolymer. These findings may provide the zwitterionic phosphorylcholine based materials to be a promising candidate to treat dental hypersensitivity and other related dental diseases.

Zwitterionic/active ester block polymers as multifunctional coating for polyurethane-based substrates

Bacterial associated infection, blood coagulation, and tissue adhesion are severe issues associated with biomedical implants & devices in clinic applications. Here, we report a general strategy to simultaneously tackle these...

Multifunctional Coatings of Titanium Implants Toward Promoting Osseointegration and Preventing Infection: Recent Developments

Titanium and its alloys are dominant material for orthopedic/dental implants due to their stable chemical properties and good biocompatibility. However, aseptic loosening and peri-implant infection remain problems that may lead to implant removal eventually. The ideal orthopedic implant should possess both osteogenic and antibacterial properties and do proper assistance to in situ inflammatory cells for anti-microbe and tissue repair. Recent advances in surface modification have provided various strategies to procure the harmonious relationship between implant and its microenvironment. In this review, we provide an overview of the latest strategies to endow titanium implants with bio-function and anti-infection properties. We state the methods they use to preparing these efficient surfaces and offer further insight into the interaction between these devices and the local biological environment. Finally, we discuss the unmet needs and current challenges in the development of ideal materials for bone implantation.

Phosphonate/quaternary ammonium copolymers as high-efficiency antibacterial coating for metallic substrates

Designing a coating material with efficient bactericidal property to cope with bacterial associated infections is highly desirable for metallic implants and devices. Here, we report phosphonate/quaternary ammonium copolymers, p(DEMMP-co-TMAEMA), as the new type of metal anchorable high-efficiency antibacterial coating. Seven p(DEMMP-co-TMAEMA) polymers with varied cationic components were precisely prepared via random radical polymerization. Copolymers were constructed on titanium alloy (TC4) substrates based on strong covalent bonding between the phosphonate group and metallic substrates through a one-step process as evidenced by XPS and water contact angle tests. A robust relationship between the composition of the copolymers and the bactericidal ability endowed to TC4 substrates was established. Results showed that the copolymer, with the pDEMMP content even as low as 6.3%, was able to anchor onto TC4 substrates. With the increase of cationic pTMAEMA content from 4.0 to 93.7% in the coating copolymer, the bactericidal ability endowed to the TC4 substrates was steadily increased from 39.4 to 98.8% for S. aureus and from 70.0 to 99.4% for E. coli after 8 h's of contacting. All p(DEMMP-co-TMAEMA) coating on TC4 substrates showed limited cytotoxicity to C2C12 cells. Notably, the phosphonate/quaternary amine copolymers can be easily constructed on diverse biomedical metals such as titanium (Ti), stainless steel (SS), and Ni/Cr alloys with significantly increased antibacterial performance, demonstrating the potency of the copolymer as the general high-efficiency antibacterial coating for diverse bio-metals.

A Uniform and Robust Bioinspired Zwitterion Coating for Use in Blood-Contacting Catheters with Improved Anti-Inflammatory and Antithrombotic Properties

Inflammation and thrombosis are two major complications of blood-contacting catheters that are used as extracorporeal circuits for hemodialysis and life-support systems. In clinical applications, complications can lead to increased mortality and morbidity rates. In this work, a biomimetic erythrocyte membrane zwitterion coating based on poly(2-methacryloyloxyethyl phosphorylcholine-co-dopamine methacrylate) (pMPCDA) copolymers is uniformly and robustly modified onto a polyvinyl chloride (PVC) catheter via mussel-inspired surface chemistry. The zwitterionic pMPCDA coating exhibits excellent antifouling activity and resists bacterial adhesion, fibrinogen adsorption, and platelet adhesion/activation. The material also demonstrates great hemocompatibility, cytocompatibility, and anticoagulation properties in vitro. Additionally, this biocompatible pMPCDA coating reduces in vivo foreign-body reactions by mitigating inflammatory response and collagen capsule formation, due to its outstanding ability to resist nonspecific protein adsorption. More importantly, when compared with a bare PVC catheter, the pMPCDA coating exhibits outstanding antithrombotic properties when tested in an ex vivo rabbit perfusion model. Thus, it is envisioned that this biomimetic erythrocyte membrane surface strategy will provide a promising way to mitigate inflammation and thrombosis caused by the use of blood-contacting catheters.

An in situ-forming polyzwitterion hydrogel: Towards vitreous substitute application

Development of a biostable and biosafe vitreous substitute is highly desirable, but remains a grand challenge. Herein, we propose a novel strategy for constructing a readily administered vitreous substitute based on a thiol-acrylate clickable polyzwitterion macromonomer. A biocompatible multivinyl polycarboxybetaine (PCB-OAA) macromonomer is designed and synthesized, and mixed with dithiothreitol (DTT) via a Michael addition reaction to form a hydrogel in vitreous cavity. This resultant PCB-OAA hydrogel exhibits controllable gelation time, super anti-fouling ability against proteins and cells, excellent biocompatibility, and approximate key parameters to human vitreous body including equilibrium water content, density, optical properties, modulus. Remarkably, outperforming clinically used silicone oil in biocompatibility, this rapidly formed hydrogel in the vitreous cavity of rabbit eyes remains stable in vitreous cavity, showing an appealing ability to prevent significantly inflammatory response, fibrosis and complications such as raised intraocular pressure (IOP), and cataract formation. This zwitterionic polymer hydrogel holds great potential as a vitreous substitute.

Poly(hexamethylene biguanide) (PHMB) as high-efficiency antibacterial coating for titanium substrates

Bacterial associated infection is a remaining urgent challenge in clinic application of metallic implants and devices. Here, we developed a new strategy to combat the bacterial associated infection of titanium alloy (TC4). Novel phosphonate/active ester block polymers (pDEMMP-b-pNHSMA) with identical phosphonate segments (DP = 29) as the metal anchorable ligand but varied active ester segments (DPs = 7, 29, and 64) as the conjugation site for poly(hexamethylene biguanide) (PHMB) were precisely prepared. Through a facile two-step process, the polymeric coating were successfully constructed on TC4 substrates as evidenced by water contact angle and XPS measurements. Through systematical in vitro antibacterial evaluations, robust relationship between the chemical structure of coating polymer and the antibacterial property endowed to the TC4 substrates has been established. Results showed that the block polymer, bearing an active ester segment of 64 repeat units, enabled dense packing of PHMB coating on the TC4 surface, which is able to kill 100% of both S. aureus and E. coli. that seeded without compromising the cytocompatibility of TC4 substrates. Furthermore, PHMB coating could significantly inhibit the colony of the bacteria and consequently reduce the bacterial associated inflammatory reaction as verified by a subcutaneous infection model on rat.

Phosphonate/zwitterionic/cationic terpolymers as high-efficiency bactericidal and antifouling coatings for metallic substrates

Bacteria associated infection is a critical challenge for metallic implants and devices in biomedical applications. Here, we report phosphonate/zwitterionic/quaternary amine terpolymers as a new type of antifouling and bactericidal coating for metallic substrates. Through reversible-addition fragmentation chain transfer polymerization (RAFT) and quaternization, well-controlled phosphonate/zwitterionic/cationic terpolymers with identical phosphonate segments (repeat units of 15) and varied zwitterionic and cationic components (nSBMA : nTMAEMA = 64 : 0, 54 : 18, 18 : 32, 9 : 52, and 0 : 70) were precisely prepared. The polymers can be coated on TC4 substrates based on the strong coordination between phosphonate groups and metallic substrates, as evidenced by water contact angle and XPS tests. Bactericidal evaluation revealed that the antibacterial efficiency was enhanced with the increase of cationic content in the coating polymers. TC4 substrates coated with the polymer coating with a cationic segment of 70 repeat units were able to kill 97.5 and 94.0% of S. aureus and E. coli, respectively. By virtue of the antifouling ability of the zwitterionic component and the bactericidal ability of the cationic component, the antibacterial efficiency was increased to 99.5% without significant compromising of the cytocompatibility. Meanwhile, the dual functional terpolymers could be easily applied on other metallic substrates, such as titanium, stainless steel, and Ni/Cr alloy, which were able to kill up to 97.9% of S. aureus and 99.9% of E. coli, respectively, endowing the excellent antibacterial properties to general bio-metals. The high-efficiency antibacterial modification strategy demonstrated here may find many applications on metallic implants and devices to combat bacterial associated infections.

Superhydrophilicity and strong salt-affinity: Zwitterionic polymer grafted surfaces with significant potentials particularly in biological systems

In recent years, zwitterionic polymers have been frequently reported to modify various surfaces to enhance hydrophilicity, antifouling and antibacterial properties, which show significant potentials particularly in biological systems. This review focuses on the fabrication, properties and various applications of zwitterionic polymer grafted surfaces. The "graft-from" and "graft-to" strategies, surface grafting copolymerization and post zwitterionization methods were adopted to graft lots type of the zwitterionic polymers on different inorganic/organic surfaces. The inherent hydrophilicity and salt affinity of the zwitterionic polymers endow the modified surfaces with antifouling, antibacterial and lubricating properties, thus the obtained zwitterionic surfaces show potential applications in biosystems. The zwitterionic polymer grafted membranes or stationary phases can effectively separate plasma, water/oil, ions, biomolecules and polar substrates. The nanomedicines with zwitterionic polymer shells have "stealth" effect in the delivery of encapsulated drugs, siRNA or therapeutic proteins. Moreover, the zwitterionic surfaces can be utilized as wound dressing, self-healing or oil extraction materials. The zwitterionic surfaces are expected as excellent support materials for biosensors, they are facing the severe challenges in the surface protection of marine facilities, and the dense ion pair layers may take unexpected role in shielding the grafted surfaces from strong electromagnetic field.

Development of PVDF Ultrafiltration Membrane with Zwitterionic Block Copolymer Micelles as a Selective Layer

In recent years, block copolymer micellar assemblies with the formation of structured nanoparticles have been considered as an emerging technology in membrane science. In this work, the poly(methyl methacrylate)-block-poly(sulfobetaine methacrylate) copolymer was directly synthesized using Reversible Addition-Fragmentation chain Transfer (RAFT) polymerization and self-assembled in a selective medium (2,2,2-trifluroethanol/water). Then, poly(methyl methacrylate)-block-poly(sulfobetaine methacrylate) copolymers were casted onto a commercial PVDF membrane to form a thin porous selective layer. The prepared nanoparticles and the resulting membranes were fully characterized using microscopy methods (SEM and AFM), whereas the membrane performance was evaluated in terms of permeability and the molecular weight cut off. The results from this study demonstrate the preparation of an ultrafiltration membrane made from the assembly of poly(methyl methacrylate)-block-poly(sulfobetaine methacrylate) copolymer micelles on the top of a PVDF membrane in the form of thin film. The copolymer chain orientation leads to a membrane surface enriched in hydrophilic PSBMA, which confers a suitable behavior for aqueous solution filtration on the membrane, while preserving the high chemical and mechanical resistance of the PVDF.

Rational design of a zwitterionic–phosphonic copolymer for the surface antifouling modification of multiple biomedical metals

The relationship between the composition of the copolymer and the antifouling ability conferred to the metallic substrates has been established.

Antibacterial activity, cell toxicity, and mechanical property of ultra-high molecular weight polyethylene/chlorhexidine acetate–montmorillonite nanocomposite

Nanocomposites have been extensively used in many fields. Their properties can be improved or enhanced by the components in the nanocomposites. In this study, we reported the antibacterial activity, cell toxicity, and mechanical property of a three-component nanocomposite which consisted of ultra-high molecular weight polyethylene (UHMWPE), chlorhexidine acetate (CA), and montmorillonite (MMT). This nanocomposite (UHMWPE/CA-MMT) maintained good short-term resistance to bacterial adhesion, and its long-term resistance to bacterial adhesion was significantly improved as the interlayer space in montmorillonite prevented effectively the agglomeration and precipitation of chlorhexidine acetate after the intercalation of chlorhexidine acetate into montmorillonite. Also, its cell toxicity was reduced as the interlayer space in montmorillonite inhibited the release rate of chlorhexidine acetate. In addition, the mechanical property of UHMWPE/CA-MMT was improved because of the synergistic optimization of these three components. These findings suggested that this three-component nanocomposite UHMWPE/CA-MMT may be a promising biomaterial.

Antifouling Super Water Absorbent Supramolecular Polymer Hydrogel as an Artificial Vitreous Body

Recently, there has been a high expectation that high water absorbent hydrogels can be developed as an artificial vitreous body. However, the drawbacks associated with in vivo instability, biofouling, uncontrollable in situ reaction time, and injection-induced precrosslinked fragmentation preclude their genuine use as vitreous substitutes. Here, a supramolecular binary copolymer hydrogel termed as PNAGA-PCBAA by copolymerization of N-acryloyl glycinamide (NAGA) and carboxybetaine acrylamide (CBAA) is prepared. This PNAGA-PCBAA hydrogel physically crosslinked by dual amide hydrogen bonds of NAGA exhibits an ultralow solid content (1.6, 98.4 wt% water content), and shear-thinning behavior, body temperature extrudability/self-healability, rapid network recoverability, and very close key parameters (modulus, antifouling/antifibrosis, light transmittance, refractive index, ultrastability) to human vitreous body. It is demonstrated that the hydrogel can be readily injected by a 22G needle into the rabbits' eyes where the gelling network is rapidly recovered. After 16 weeks postoperation, the hydrogel acts as a very stable vitreous substitute without affecting the structure of soft tissues in eye, or eliciting adverse effects. This supramolecular binary copolymer hydrogel finds a broad application in ophthalmic fields as not only a self-recoverable permanent vitreous substitute, but also transient intraocular filling for prevention of inner tissues in postsurgical eyes.