Dye-doped cellulose nanocrystals as novel dusting powders for visualizing latent fingerprints

Powder-dusting method based on the visual contrast between the background surface and powder-covered ridges of a fingerprint is widely used to develop the invisible latent fingerprints (LFPs) left at crime scenes. Recently, the development of nano-sized powders with excellent optical performances has been extensively explored. In this work, we employed environmentally friendly and low-toxicity cellulose nanocrystals as the novel support. Using dye-doped cellulose nanocrystals as novel dusting powders, two dyes (phenylfluorone and curcumin) were adsorbed on the cellulose nanocrystals by a simple batch adsorption method. The dye-doped cellulose nanocrystals (namely, phenylfluorone-doped cellulose nanocrystals (PDCN) and curcumin-doped cellulose nanocrystals (CDCN)) containing 2% of the loaded mass of both the dyes with bright green fluorescence were developed to visualize LFPs on the surfaces of various substrates (such as glass slide, printing paper, orange plastic card, tile, stainless steel, compact disc, red plastic packing, copper foil and aluminum foil). Images of the LFPs can been obtained by both the dye-doped cellulose nanocrystals with sufficient affinity to the ridges of LFPs. High-quality ridge details with features at the second and third level can be detected by CDCN, whereas PDCN only display the secondary-level features of ridge details. Compared with PDCN, CDCN illustrate higher sensitivity, higher selectivity, and better contrast, especially for detecting fresh and non-fresh LFPs on porous and non-porous substrates, and has the potential for practical use in forensic science.

Greening the pathways: a comprehensive review of sustainable synthesis strategies for silica nanoparticles and their diverse applications

Silica nanoparticles (SiNPs) have emerged as a multipurpose solution with wide-ranging applications in various industries such as medicine, agriculture, construction, cosmetics, and food production. In 1961, Stöber introduced a ground-breaking sol-gel method for synthesizing SiNPs, which carried a new era of exploration both in academia and industry, uncovering numerous possibilities for these simple yet multifaceted particles. Inspite of numerous reported literature with wide applicability, the synthesis of these nanoparticles with the desired size and functionalities poses considerable challenges. Over time, researchers have strived to optimize the synthetic route, particularly by developing greener approaches that minimize environmental impact. By reducing hazardous chemicals, energy consumption, and waste generation, these greener synthesis methods have become an important focus in the field. This review aims to provide a comprehensive analysis of the various synthetic approaches available for different types of SiNPs. Starting from the Stöber' method, we analyze other methods as well to synthesis different types of SiNPs including mesoporous, core-shell and functionalized nanoparticles. With increasing concerns with the chemical methods associated for environmental issues, we aim to assist readers in identifying suitable greener synthesis methods tailored to their specific requirements. By highlighting the advancements in reaction time optimization, waste reduction, and environmentally friendly precursors, we offer insights into the latest techniques that contribute to greener and more sustainable SiNPs synthesis. Additionally, we briefly discuss the diverse applications of SiNPs, demonstrating their relevance and potential impact in fields such as medicine, agriculture, and cosmetics. By emphasizing the greener synthesis methods and economical aspects, this review aims to inspire researchers and industry professionals to adopt environmentally conscious practices while harnessing the immense capabilities of SiNPs.

Lab-on-a-Fiber Wearable Multi-Sensor for Monitoring Wound Healing

Chronic wounds are regarded as a silent epidemic, affecting 1-2% of the population and representing 2-4% of healthcare expenses. The current methods used to assess the wound healing process are based on the visual evaluation of physical parameters. This work aims to design a wearable non-invasive device capable of evaluating three parameters simultaneously: the pH and the levels of glucose and matrix metalloproteinase (MMP) present in the wound exudate. The device is composed of three independent polymer optical fibers functionalized with fluorescent-based sensing chemistries specific to the targeted analytes. Each fiber is characterized in terms of detection sensitivity and selectivity confirming their suitability for monitoring the targeted parameters in ranges relevant to the wound environment. The selectivity and robustness of the multi-sensing device are confirmed with analyses using complex solutions with different pH levels (5, 6, and 7), different concentrations of glucose (1.25, 2.5, and 5 mm), and MMP (1.25, 2.5, and 5 µg mL-1 ). Given the simple set-up, the affordability of the materials used and the possibility of detecting additional parameters relevant to wound healing, such multi-sensing fiber-based devices could pave the way for novel non-invasive wearable tools enabling the assessment of wound healing from the molecular perspective.

Silica nanoparticle accumulation in plants: current state and future perspectives

With their excellent biocompatibility, adjustable size, and high specific surface area, silica nanoparticles (SiO2 NPs) offer an alternative to traditional bulk fertilizers as a means to promote sustainable agriculture. SiO2 NPs have been shown to promote the growth of plants and to reduce the negative effects of biotic and abiotic stresses, but their bioaccumulation is a crucial factor that has been overlooked in studies of their biological effects. In this review, the techniques to quantify and visualize SiO2 NPs in plants were examined first. We then provide a summary of the current state of knowledge on the accumulation, translocation, and transformation of SiO2 NPs in plants and of the factors (e.g., the physicochemical properties of SiO2 NPs, plant species, application mode, and environmental conditions) that influence SiO2 NP bioaccumulation. The challenges in analyzing NP-plant interactions are considered as well. We conclude by identifying areas for further research that will advance our understanding of NP-plant interactions and thus contribute to more sustainable, eco-friendly, nano-enabled approaches to improving crop nutrient supplies. The information presented herein is important to improve the delivery efficiency of SiO2 NPs for precision and sustainable agriculture and to assess the safety of SiO2 NPs during their application in agriculture.

Survival, growth, behavior, hematology and serum biochemistry of mice under different concentrations of orally administered amorphous silica nanoparticle

Silica nanoparticles (SiNPs) are used extensively in consumer products and biomedical research basically due to ease of production and low cost. However, insufficient literature is reported regarding the toxicity and biocompatibility of SiNPs. The present study aimed to investigate the potential role of amorphous SiNPs on survival, growth, behavioral alterations, hematology and serum biochemistry of mice at four concentrations (control, 50, 100 and 150 mg/kg/day) of an oral supplementation for a period of 3 months. Signs of toxicity (lethargy, nausea, coma, tremors, vomiting and diarrhea, etc.) were noted at 9:00 am and 9:00 pm (twice a day) and the body weight of each of these mice was measured every week. The data were subjected to mean, standard deviation (S.D). Moreover, One-Way Analysis of Variance (ANOVA) and Dunnett's test were applied for analysis of statistical significance between groups by using SPSS software, version 20. All the mice survived with minor alterations in behavior and no significant weight changes were observed during the stipulated time period. Complete blood count (CBC) analysis indicated non-significant (P ≥ 0.05) systemic dysfunctions of organ systems. However, there was elevation in the level of AST and ALT in the analysis of serum biochemistry, while the values of all other examined parameters were not-significant (P ≥ 0.05). The study concluded that orally administered large silica nanoparticles up to the dose level of 150 mg/kg/day are nontoxic for the in vivo use in mice.

pH-responsive silica nanoparticles for the treatment of skin wound infections

Chronic wounds are not only a burden for patients but also challenging for clinic treatment due to biofilm formation. Here, we utilized the phenomenon that chronic wounds possess an elevated local pH of 8.9 and developed pH-sensitive silica nanoparticles (SiNPs) to achieve a targeted drug release on alkaline wounds and optimized drug utility. Chlorhexidine (CHX), a disinfectant and antiseptic, was loaded into SiNPs as the model drug. The loaded CHX displayed a release 4 - 5 fold higher at pH 8.0 and 8.5 than at pH 6.5, 7.0 and 7.4. CHX-SiNPs furthermore exhibited a distinctive antibacterial activity at pH 8.0 and 8.5 against both Gram-negative and -positive bacterial pathogens, while no cytotoxicity was found according to cell viability analysis. The CHX-SiNPs were further formulated into alginate hydrogels to allow ease of use. The antibacterial efficacy of CHX-SiNPs was then studied with artificial wounds on ex vivo human skin. Treatment with CHX-SiNPs enabled nearly a 4-lg reduction of the viable bacterial cells, and the alginate formulated CHX-SiNPs led to almost a 3-lg reduction compared to the negative controls. The obtained results demonstrated that CHX-SiNPs are capable of efficient pH-triggered drug release, leading to high antibacterial efficacy. Moreover, CHX-SiNPs enlighten clinic potential towards the treatment of chronic wound infections. STATEMENT OF SIGNIFICANCE: A platform for controlled drug release at a relatively high pH value i.e., over 8, was established by tuning the physical structures of silica nanoparticles (SiNPs). Incorporation of chlorhexidine, an antimicrobial agent, into the fabricated SiNPs allowed a distinctive inhibition of bacterial growth at alkaline pHs, but not at acidic pHs. The efficacy of the SiNPs loaded with chlorhexidine in treating wound infections was further validated by utilizing ex vivo human skin samples. The presented work demonstrates clinic potential of employing alkaline pH as a non-invasive stimulus to achieve on-demand delivery of antimicrobials through SiNPs, showcasing a valuable approach to treating bacterial infections on chronic wounds.

Multifunctional superparamagnetic nanoparticles with a fluorescent silica shell for the in vitro study of bio-nano interactions at the subcellular scale

Despite the high level of interest in bio-nano interactions, detailed intracellular mechanisms that govern nanoscale recognition and signalling still need to be unravelled. Magnetic nanoparticles (NPs) are valuable tools for elucidating complex intracellular bio-nano interactions. Using magnetic NPs, it is possible to isolate cell compartments that the particles interact with during intracellular trafficking. Studies at the subcellular scale rely heavily on optical microscopy; therefore, combining the advantages of magnetic recovery with excellent imaging properties to allow intracellular NP tracking is of utmost interest for the nanoscience field. However, it is a challenge to prepare highly magnetic NPs with a suitable fluorescence for the fluorescence imaging techniques typically used for biological studies. Here we present the synthesis of biocompatible multifunctional superparamagnetic multicore NPs with a bright fluorescent silica shell. The incorporation of an organic fluorophore in the silica surrounding the magnetic multicore was optimised to enable the particles to be tracked with the most common imaging techniques. To prevent dye loss resulting from silica dissolution in biological environments, which would reduce the time that the particles could be tracked, we added a thin dense encapsulating silica layer to the NPs which is highly stable in biological media. The synthesised multifunctional nanoparticles were evaluated in cell uptake experiments in which their intracellular location could be clearly identified using fluorescence imaging microscopy, even after 3 days. The magnetic properties of the iron oxide core enabled both efficient recovery of the NPs from the intracellular environment and the extraction of cell compartments involved in their intracellular trafficking. Thus, the NPs reported here provide a promising tool for the study of the processes regulating bio-nano interactions.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Rapid Fluorescence Quenching Detection of Escherichia coli Using Natural Silica-Based Nanoparticles

The development of fluorescent silica nanoparticles (SNP-RB) from natural amorphous silica and its performance as an Escherichia coli (E. coli) biosensor is described in this paper. SNP-RB was derived from silica recovered from geothermal installation precipitation and modified with the dye, Rhodamine B. The Fourier Infrared (FTIR) confirms the incorporation of Rhodamine B in the silica matrix. Transmission Electron Microscopy (TEM) micrographs show that the SNP-RB had an irregular structure with a particle diameter of about 20-30 nm. The maximum fluorescence spectrum of SNP-RB was recorded at 580 nm, which was further applied to observe the detection performance of the fluorescent nanoparticles towards E. coli. The sensing principle was based on the fluorescence-quenching mechanism of SNP-RB and this provided a wide linear E. coli concentration range of 10-10⁵ CFU/mL with a limit detection of 8 CFU/mL. A rapid response time was observed after only 15 min of incubation of SNP-RB with E. coli. The selectivity of the biosensor was demonstrated and showed that the SNP-RB only gave quenching response only to live E. coli bacteria. The use of SNP-RB as a sensing platform reduced the response time significantly compared to conventional 3-day bacterial assays, as well having excellent analytical performance in terms of sensitivity and selectivity.

Light-Sheet Skew Ray-Enhanced Localized Surface Plasmon Resonance-Based Chemical Sensing

A stronger absorption of pump/probe light is desirable for maximizing the sensitivity to enable accurate measurements of trace chemical elements. We introduce a new sensing technique built on light-sheet excitation of skew rays in a multimode fiber with an additional enhancement of localized surface plasmon resonance (LSPR) and its evanescent-field hotspots between gold nanospheres on the coated fiber. A skewed light-sheet (i.e., a thin plane of light) can exploit the optimum ray group, producing enhanced and uniform interactions between light and matter for higher absorption/sensitivity and higher power threshold. The heightened evanescent field couples to the localized surface plasmon resonant modes to attain even greater sensitivity. We compared this excitation method with the previously demonstrated light-sheet skew ray-based sensor without LSPR and observed an enhancement in normalized attenuation of pump light up to seven orders of magnitude for low-concentration rhodamine B. The improvement in the normalized detection limit is almost three orders of magnitude. This new sensing technique uses a functionalized fiber rather than pairing a passive fiber with added functional particles in the analyte, which offers better area-selectivity. The potentially low-cost chemical sensors can be used on a range of sensing mechanisms such as pump/probe light absorption.

Dye-doped silica nanoparticles: synthesis, surface chemistry and bioapplications

Background

Fluorescent silica nanoparticles have been extensively utilised in a broad range of biological applications and are facilitated by their predictable, well-understood, flexible chemistry and apparent biocompatibility. The ability to couple various siloxane precursors with fluorescent dyes and to be subsequently incorporated into silica nanoparticles has made it possible to engineer these fluorophores-doped nanomaterials to specific optical requirements in biological experimentation. Consequently, this class of nanomaterial has been used in applications across immunodiagnostics, drug delivery and human-trial bioimaging in cancer research.

Main body

This review summarises the state-of-the-art of the use of dye-doped silica nanoparticles in bioapplications and firstly accounts for the common nanoparticle synthesis methods, surface modification approaches and different bioconjugation strategies employed to generate biomolecule-coated nanoparticles. The use of dye-doped silica nanoparticles in immunoassays/biosensing, bioimaging and drug delivery is then provided and possible future directions in the field are highlighted. Other non-cancer-related applications involving silica nanoparticles are also briefly discussed. Importantly, the impact of how the protein corona has changed our understanding of NP interactions with biological systems is described, as well as demonstrations of its capacity to be favourably manipulated.

Conclusions

Dye-doped silica nanoparticles have found success in the immunodiagnostics domain and have also shown promise as bioimaging agents in human clinical trials. Their use in cancer delivery has been restricted to murine models, as has been the case for the vast majority of nanomaterials intended for cancer therapy. This is hampered by the need for more human-like disease models and the lack of standardisation towards assessing nanoparticle toxicity. However, developments in the manipulation of the protein corona have improved the understanding of fundamental bio–nano interactions, and will undoubtedly assist in the translation of silica nanoparticles for disease treatment to the clinic.

Polycarboxylated Dextran as a Multivalent Linker: Synthesis and Target Recognition of the Antibody-Nanoparticle Bioconjugates in PBS and Serum

Nanoparticles (NPs) functionalized with antibodies on their surface are used in a wide range of research applications. However, the bioconjugation chemistry between the antibodies and the surface of nanoparticles can be very challenging, often accompanied by several undesired effects such as nanoparticle aggregation, antibody denaturation, or poor target recognition of the surface-bound antibodies. Here, we report on a synthesis of fluorescent silica nanoparticle-antibody (NP-Ab) conjugates, in which polycarboxylated dextran is used as the multivalent linker. First, we present a synthetic methodology to prepare polycarboxylated dextrans with molecular weights of 6, 40, and 70 kDa. Second, we used water-soluble, polycarboxylated dextrans as a multivalent spacers/linkers to immobilize antibodies onto fluorescent silica nanoparticles. The prepared NP-Ab conjugates were tested in a direct binding assay format in both phosphate-buffered saline buffer and whole serum to investigate the role of the spacer/linker in the capacity of the NP-Ab to specifically recognize their target in "clean" and also in complex media. We have compared the dextran conjugates with two standards: (a) NP-Ab with antibodies attached on the surface of nanoparticles through the classical physical adsorption method and (b) NP-Ab where an established poly(amidoamine) (PAMAM) dendrimer was used as the linker. Our results showed that the polycarboxylated 6 kDa dextran facilitates antibody immobilization efficiency of nearly 92%. This was directly translated into the improved molecular recognition of the NP-Ab, which was measured by a direct binding assay. The signal-to-noise ratio in buffered solution for the 6 kDa dextran NP-Ab conjugates was 81, nearly 3 times higher than that of PAMAM G4.5 conjugates and 9 times higher than the physically adsorbed NP-Ab sample. In whole serum, the effect of 6 kDa dextran was more hindered due to the formation of protein corona but the signal-to-noise ratio was at least double that of the physically adsorbed NP-Ab conjugates.

Designed Strategies for Fluorescence-Based Biosensors for the Detection of Mycotoxins

Small molecule toxins such as mycotoxins with low molecular weight are the most widely studied biological toxins. These biological toxins are responsible for food poisoning and have the potential to be used as biological warfare agents at the toxic dose. Due to the poisonous nature of mycotoxins, effective analysis techniques for quantifying their toxicity are indispensable. In this context, biosensors have been emerged as a powerful tool to monitors toxins at extremely low level. Recently, biosensors based on fluorescence detection have attained special interest with the incorporation of nanomaterials. This review paper will focus on the development of fluorescence-based biosensors for mycotoxin detection, with particular emphasis on their design as well as properties such as sensitivity and specificity. A number of these fluorescent biosensors have shown promising results in food samples for the detection of mycotoxins, suggesting their future potential for food applications.