Mussel-Inspired Antimicrobial and Antifouling Coating Constructed by the Combination of Zwitterionic Copolymers and Silver Nanoparticles

Biofouling and bacterial infections are significant challenges in biomedical devices. In this study, a biocompatible dual-functional coating with antimicrobial and antifouling properties is developed by co-depositing the zwitterionic copolymer and silver nanoparticles via a dopamine-assisted strategy. Inspired by mussel adhesion, the coating exhibits substrate-independent adhesion as a result of the formation of irreversible covalent bonds. The zwitterionic copolymer in the dual coating plays a crucial role in improving surface wettability and reducing protein adsorption and platelet and bacterial adhesion, thereby improving its antifouling property significantly. The silver nanoparticles reduced by self-polymerized polydopamine without the addition of any chemical reductants can effectively improve the antimicrobial activity. Furthermore, as the zwitterion content in the zwitterion polymer increases, the antibacterial and antifouling properties of the coating can be further advanced. The simple and effective approach presented here provides a promising pathway for constructing potent antibacterial and antifouling surfaces, demonstrating great potential for clinical applications in implanted materials.

Effect of Codeposition of Polydopamine with Polyethylenimine or Poly(ethylene glycol) Coatings on Silver Nanoparticle Synthesis

This study investigated the effects of polydopamine (PDA), PDA/polyethylenimine (PEI), and PDA/poly(ethylene glycol) (PEG) deposition on silver nanoparticle (AgNP) formation. PEI or PEG with different molecular weights was mixed with dopamine at different concentrations to obtain various PDA/PEI or PDA/PEG codepositions. These codepositions were soaked in silver nitrate solution to observe AgNPs generated on the surface and then to examine the catalytic activity of AgNPs for the reduction of 4-nitrophenol to 4-aminophenol. Results revealed that AgNPs on PDA/PEI or PDA/PEG codepositions were smaller and more dispersed than those on PDA coatings. Codeposition with 0.5 mg/mL polymer and 2 mg/mL dopamine generated the smallest AgNPs in each codeposition system. The content of AgNPs on PDA/PEI codeposition first increased and then decreased with an increase in the PEI concentration. PEI with a molecular weight of 600 (PEI₆₀₀) generated a higher AgNP content than did PEI with a molecular weight of 10000. The AgNP content did not change with the concentration and molecular weight of PEG. Except for the codeposition with 0.5 mg/mL PEI₆₀₀, codepositions produced less silver than did the PDA coating. The catalytic activity of AgNPs on all codepositions was better than that on PDA. The catalytic activity of AgNPs on all codepositions was related to the size of AgNPs. Smaller AgNPs exhibited more satisfactory catalytic activity. The codeposition with 0.5 mg/mL PEI₆₀₀ had the highest rate constant (1.64 min^-1). The systematic study provides insight into the relationship between various codepositions and AgNP generation and demonstrates that the composition of these codepositions can be tuned to increase their applicability.

Impact of Membrane Modification and Surface Immobilization Techniques on the Hemocompatibility of Hemodialysis Membranes: A Critical Review

Despite significant research efforts, hemodialysis patients have poor survival rates and low quality of life. Ultrafiltration (UF) membranes are the core of hemodialysis treatment, acting as a barrier for metabolic waste removal and supplying vital nutrients. So, developing a durable and suitable membrane that may be employed for therapeutic purposes is crucial. Surface modificationis a useful solution to boostmembrane characteristics like roughness, charge neutrality, wettability, hemocompatibility, and functionality, which are important in dialysis efficiency. The modification techniques can be classified as follows: (i) physical modification techniques (thermal treatment, polishing and grinding, blending, and coating), (ii) chemical modification (chemical methods, ozone treatment, ultraviolet-induced grafting, plasma treatment, high energy radiation, and enzymatic treatment); and (iii) combination methods (physicochemical). Despite the fact that each strategy has its own set of benefits and drawbacks, all of these methods yielded noteworthy outcomes, even if quantifying the enhanced performance is difficult. A hemodialysis membrane with outstanding hydrophilicity and hemocompatibility can be achieved by employing the right surface modification and immobilization technique. Modified membranes pave the way for more advancement in hemodialysis membrane hemocompatibility. Therefore, this critical review focused on the impact of the modification method used on the hemocompatibility of dialysis membranes while covering some possible modifications and basic research beyond clinical applications.

Biofouling-Resistant Ultrafiltration Membranes via Codeposition of Dopamine and Cetyltrimethylammonium Bromide with Retained Size Selectivity and Water Flux

Biofouling is a serious problem in ultrafiltration (UF) membrane applications. Modifying the surface of membranes with low molecular weight, commercially available antibacterial chemistries is an excellent strategy to mitigate biofouling. Herein, we report a new strategy to impart antibacterial and anti-biofouling behavior without changing the support membrane's size selectivity and pure water permeance (PWP). To this end, a strong antibacterial agent, cetyltrimethylammonium bromide (CTAB), was codeposited with dopamine onto commercial polyethersulfone (PES) UF membranes in the presence of nitrogen (N₂) gas backflow. The PWP and pore size of the support membrane did not change with codeposition, confirming the benefit of N₂ backflow in mitigating the solution intrusion phenomenon. X-ray photoelectron spectroscopy (XPS), surface ζ potentials, and contact angle measurements confirmed the successful codeposition of polydopamine (PDA) and CTAB onto the membrane. Among three different CTAB concentrations systematically investigated, the membrane functionalized with CTAB at the critical micelle concentration (CMC) provided the best anti-biofouling activity against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria and retained its surface ζ potential after being stored in 1 M NaCl (pH = 6.8) for 3 months. Our results demonstrate the potential of using a facile, one-step approach to modify commercial UF membranes without compromising their pore size or flux, while simultaneously endowing antibacterial activity.

Progress for Co-Incorporation of Polydopamine and Nanoparticles for Improving Membranes Performance

Incorporating polydopamine has become a viable method for membrane modification due to its universality and versatility. Fillers in their different categories have been confirmed as effective elements to improve the properties of membranes such as hydrophilicity, permeability, mechanical strength, and fouling resistance. Thus, this paper mainly highlights the recent studies that have been carried out using polydopamine and nanomaterial fillers simultaneously in modifying the performance of different membranes such as ultrafiltration, microfiltration, nanofiltration, reverse osmosis, and forward osmosis membranes according to the various modification methods. Graphene oxide nanoparticles have recently attracted a lot of attention among different nanoparticles used with polydopamine, due to their impressive characteristics impacts on enhancing membrane hydrophilicity, mechanical strength, and fouling resistance. Thus, the incorporation techniques of graphene oxide nanoparticles and polydopamine for enhancing membranes have been highlighted in this work. Moreover, different studies carried out on using polydopamine as a nanofiller for optimizing membrane performance have been discussed. Finally, perspectives, and possible paths of further research on mussel-inspired polydopamine and nanoparticles co-incorporation are stated according to the progress made in this field. It is anticipated that this review would provide benefits for the scientific community in designing a new generation of polymeric membranes for the treatment of different feed water and wastewater based on adhesive mussel inspired polydopamine polymer and nanomaterials combinations.

Mussel-Inspired Multicomponent Codeposition Strategy toward Antibacterial and Lubricating Multifunctional Coatings on Bioimplants

Bacterial infections and limited surface lubrication are the two key challenges for bioimplants in dynamic contact with tissues. However, the simultaneous lubricating and antibacterial properties of the bioimplants have rarely been investigated. In this work, we successfully developed a multifunctional coating with simultaneous antibacterial and lubricating properties for surface functionalization of bioimplant materials. The multifunctional coating was fabricated on a polyurethane (PU) substrate via polydopamine (PDA)-assisted multicomponent codeposition, containing polyethyleneimine (PEI) and trace amounts of copper (Cu) as synergistic antibacterial components and zwitterionic poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) as the lubricating component. The obtained PDA(Cu)/PEI/PMPC coating showed excellent antibacterial activity (antibacterial efficiency: ∼99%) to both Escherichia coli and Staphylococcus aureus compared with bare PU. The excellent antibacterial properties were attributed to the combined effect of anti-adhesion capability of hydrophilic PMPC and PEI and bactericidal activity of Cu in the coating. Meanwhile, the coefficient of friction of the coating was significantly decreased by ∼52% compared with bare PU owing to the high hydration feature of PMPC, suggesting the superior lubricating property. Furthermore, the PDA(Cu)/PEI/PMPC coating was highly biocompatible toward human umbilical vein endothelial cells demonstrated by in vitro cytotoxicity tests. This study not only contributes to the chemistry of PDA-assisted multicomponent codeposition but also provides a facile and practical way for rational design of multifunctional coatings for medical devices.

Durable Surfaces from Film-Forming Silver Assemblies for Long-Term Zero Bacterial Adhesion without Toxicity

The long-term prevention of biofilm formation on the surface of indwelling medical devices remains a challenge. Silver has been reutilized in recent years for combating biofilm formation due to its indisputable bactericidal potency; however, the toxicity, low stability, and short-term activity of the current silver coatings have limited their use. Here, we report the development of silver-based film-forming antibacterial engineered (SAFE) assemblies for the generation of durable lubricous antibiofilm surface long-term activity without silver toxicity that was applicable to diverse materials via a highly scalable dip/spray/solution-skinning process. The SAFE coating was obtained through a large-scale screening, resulting in effective incorporation of silver nanoparticles (∼10 nm) into a stable nonsticky coating with high surface hierarchy and coverage, which guaranteed sustained silver release. The lead coating showed zero bacterial adhesion over a 1 month experiment in the presence of a high load of diverse bacteria, including difficult-to-kill and stone-forming strains. The SAFE coating showed high biocompatibility and excellent antibiofilm activity in vivo.

Rational design of dual-functional surfaces on polypropylene with antifouling and antibacterial performances via a micropatterning strategy

The hydrophobicity and inertness of the polypropylene (PP) material surface usually lead to serious biofouling and bacterial infections, which hamper its potential application as a biomedical polymer. Many strategies have been developed to improve its antifouling or antibacterial properties, yet designing a surface to achieve both antifouling and antibacterial performances simultaneously remains a challenge. Herein, we construct a dual-function micropatterned PP surface with antifouling and antibacterial properties through plasma activation, photomask technology and ultraviolet light-induced graft polymerization. Based on the antifouling agent poly(2-methacryloyloxyethyl phosphate choline) (PMPC) and the antibacterial agent quaternized poly(N,N-dimethylamino)ethyl methacrylate (QPDMAEMA), two different micropatterning structures have been successfully prepared: PP-PMPC-QPDMAEMA in which QPDMAEMA is the micropattern and PMPC is the coating polymer, and PP-QPDMAEMA-PMPC in which PMPC is the micropattern and QPDMAEMA is the coating polymer. The composition, elemental distribution and surface morphology of PP-PMPC-QPDMAEMA and PP-QPDMAEMA-PMPC have been thoroughly characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM), respectively. Compared with pristine PP, the two types of micropatterned PP films exhibit good surface hydrophilicity as characterized by water contact angle measurements. The results of anti-protein adsorption, platelet adhesion and antibacterial evaluation showed that PP-PMPC-QPDMAEMA and PP-QPDMAEMA-PMPC had good anti-protein adsorption properties, especially for lysozyme (Lyz). They can effectively prevent platelet adhesion, and the anti-platelet adhesion performance of PP-QPDMAEMA-PMPC is slightly better than that of the PP-PMPC-QPDMAEMA sample. The sterilization rate of S. aureus and E. coli is as high as 95% for the two types of micropatterned PP films. Due to the rational design of micropatterns on the PP surface, the two classes of dual-functional PP materials realize both the resistance of protein and platelet adhesion, and the killing of bacteria at the same time. We anticipate that this work could provide a design strategy for the construction of multifunctional biomedical polymer materials.

Zwitterionic hydrogel modified reduced graphene oxide/ZnO nanocomposite blended membrane with high antifouling and antibiofouling performances

Membrane fouling and biofouling are major challenges in the application of membrane technology for wastewater treatment. The synthesis of antifouling and antibiofouling dual functionality membranes is a promising approach to tackling these problems. In this work, we fabricated a high-efficiency dual functionality polyethersulfone (PES) ultrafiltration membrane by blending an antibacterial reduced graphene oxide-ZnO nanocomposite into a PES matrix (rGO/ZnO-PES) followed by surface grafting of a low-fouling polyampholyte hydrogel (rGO/ZnO-z-PES). The antibacterial activity of the blended membrane was optimized by changing the nanocomposite fraction in the PES dope solution. Surface characterizations (SEM-EDS, XPS, ATR-FTIR, contact angle, and Zeta potential) confirmed the successful grafting of the zwitterionic hydrogel on the rGO/ZnO-PES membrane surface. Contact killing assays revealed that the polyampholyte hydrogel grafting did not affect the high antibacterial activity of the rGO/ZnO-PES membrane. Dynamic filtration experiments demonstrated the very high antifouling and antibiofouling of the rGO/ZnO-z-PES membrane, and significantly higher than those of the rGO/ZnO-PES and pristine PES membranes. The measured concentration of zinc ions in the permeate was low. Overall, our results demonstrate that the rGO/ZnO-z-PES membrane has excellent antifouling and antibiofouling performance and is stable and safe, and therefore very promising for wastewater treatment.

Poly(levodopa)-modified β-glucan as a candidate for wound dressings

Levodopa (biological precursor of dopamine) is sometimes used instead of dopamine for synthesis of highly adhesive polycatecholamine coatings on different materials. However, in comparison of polydopamine, little is known about biological safety of poly(levodopa) coatings and their efficacy in binding of therapeutically active substances. Therefore, thermally polymerized curdlan hydrogel was modified via two different modes using levodopa instead of commonly used dopamine and then coupled with gentamicin - aminoglycoside antibiotic. Physicochemical properties, biological safety and antibacterial potential of the hydrogels were evaluated. Poly(levodopa) deposited on curdlan exhibited high stability in wide pH range and blood or plasma, were nontoxic in zebrafish model and favored blood clot formation. Simultaneously, one of hydrogel modification modes allowed to observe high gentamicin binding capacity, antibacterial activity, relatively high nontoxicity for fibroblasts and was unfavorable for fibroblasts adhesion. Such modified poly(levodopa)-modified curdlan showed therefore high potential as wound dressing biomaterial.

Bioinspired dopamine and zwitterionic polymers for non-fouling surface engineering

Biofouling is a serious problem in the medical, marine, and all other industrial fields as it poses significant health risks and financial losses. Therefore, there is a great demand for endowing surfaces with antifouling properties to mitigate biofouling. Zwitterionic polymers (containing an equimolar number of homogeneously distributed anionic and cationic groups on the polymer chains) have been used extensively as one of the best antifouling materials for surface modification. Being a superhydrophilic polymer, zwitterionic polymers need a strong binding agent to continue to remain attached to the surface for long-term applications. The use of a mussel-inspired dopamine adhesive functional layer is one of the most widely exploited approaches for the attachment of a zwitterion layer on the surface via thiol and amine chemistry. Based on recent studies, we have categorized this dopamine and zwitterion conjugation into four different approaches: (1) conjugation of dopamine with zwitterions by direct modification of zwitterions with the dopamine functional moiety; (2) co-deposition of dopamine with zwitterionic polymers; (3) zwitterionic post modification of the polydopamine (PDA) coated surface; and (4) surface-initiated polymerization of zwitterionic polymers using dopamine modified initiators. In this review, we have briefly discussed about all the possible conjugation mechanisms and reactions for this promising dopamine and zwitterion conjugation and how this conjugated system significantly contributes to the development of non-fouling surfaces along with the other applications.

Mussel-inspired surface functionalization of polyamide microfiltration membrane with zwitterionic silver nanoparticles for efficient anti-biofouling water disinfection

Mature microfiltration (MF) membrane is a low-cost, effective, and promising technology to provide affordable purified water for people living in developing countries. However, the lack of disinfection ability and inherent membrane fouling problems have seriously restricted the large-scale application of conventional MF treatment system in producing safe drinking water. In this work, zwitterionic silver nanoparticles (AgNPs) with surface modification of poly(carboxybetaine acrylate-co-dopamine methacryamide) (PCBDA) copolymers were robustly immobilized onto commercial polyamide MF membrane via mussel-inspired chemistry for water disinfection. The designed microfiltration membrane, named as PCBDA@AgNPs-MF, exhibited integrated properties of high and stable payload of AgNPs, broad-spectrum anti-adhesive and antimicrobial activities, and easy removal of inactivated microbial cells from membrane surface. Ascribing to the synergetic effect of anti-adhesive and antimicrobial features brought by zwitterionic PCBDA@AgNPs, the biofilms growth on polyamide membrane surface was significantly inhibited, which showed potential access to achieve long-term biofouling resistance and maintain water flux for conventional MF membrane. As water disinfection device, these attributes enabled PCBDA@AgNPs-MF to effectively disinfect the model and natural bacteria-contaminated water.

Infusion of Silver-Polydopamine Particles into Polyethersulfone Matrix to Improve the Membrane's Dye Desalination Performance and Antibacterial Property

The advancement in membrane science and technology, particularly in nanofiltration applications, involves the blending of functional nanocomposites into the membranes to improve the membrane property. In this study, Ag-polydopamine (Ag-PDA) particles were synthesized through in situ PDA-mediated reduction of AgNO₃ to silver. Infusing Ag-PDA particles into polyethersulfone (PES) matrix affects the membrane property and performance. X-ray photoelectron spectroscopy (XPS) analyses confirmed the presence of Ag-PDA particles on the membrane surface. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) describe the morphology of the membranes. At an optimum concentration of Ag-PDA particles (0.3 wt % based on the concentration of PES), the modified membrane exhibited high water flux 13.33 L∙m⁻²∙h⁻¹ at 4 bar with high rejection for various dyes of >99%. The PES_Ag-PDA0.3 membrane had a pure water flux more than 5.4 times higher than that of a pristine membrane. Furthermore, in bacterial attachment using Escherichia coli, the modified membrane displayed less bacterial attachment compared with the pristine membrane. Therefore, immobilizing Ag-PDA particles into the PES matrix enhanced the membrane performance and antibacterial property.

Antifouling and Antibacterial Polymer-Coated Surfaces Based on the Combined Effect of Zwitterions and the Natural Borneol

The development and application of natural antibacterial materials have always been the focus of biomedical research. Borneol as a natural antibacterial compound has received extensive attention. However, the hydrophobicity caused by its unique structure limits its application range to a certain extent. In this study, we combine zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) with a complex bicyclic monoterpene structure borneol compound and prepare an excellent antifouling and antibacterial surface via the Schiff-base bond. The prepared coating has excellent hydrophilicity verified by the contact angle (CA), and its polymer layer is confirmed by X-ray photoelectron spectroscopy (XPS). The zwitterion MPC and borneol moieties in the copolymer play a coordinating role, relying on super hydration and the special stereochemical structure to prevent protein adsorption and inhibit bacterial adhesion, respectively, which are demonstrated by bovine serum albumin (BSA) adsorption and antibacterial activity test. Moreover, the water-soluble borneol derivative as the antibacterial surfaces we designed here was biocompatible toward MRC-5 (lung fibroblasts), as showed by in vitro cytotoxicity assays. Such results indicate the potential application of the as-prepared hydrophilic surfaces in the biomedical materials.

A mussel-bioinspired multi-functional hyperbranched polymeric coating with integrated antibacterial and antifouling activities for implant interface modification

On the basis of a function integrating strategy, a mussel-inspired hyperbranched polymeric coating with antibacterial and antifouling properties was ingeniously designed and synthesized for the interface modification of implants.

Combined strategy of blending and surface modification as an effective route to prepare antifouling ultrafiltration membranes

Ultrafiltration (UF) membranes blended with hydrophilic nanomaterials usually exhibit preferable overall performance including the membrane permeability and antifouling capability. However, the improvement in antifouling performance may be not outstanding due to the small amount of nanomaterial distributed near the membrane surface and the limited improvement in membrane hydrophilicity. Notably, excess addition of nanomaterials may lead to the decline in membrane permeability. In order to solve the above problem, we integrated the strategy of blending and surface modification to construct novel hybrid UF membranes. Novel nanohybrid was prepared via tannic acid (TA) coating on hydroxyapatite nanotubes (HANTs) and the subsequent grafting of zwitterionic polyethylenimine (ZPEI). The prepared nanohybrid (HANTs@TA-ZPEI) was incorporated with the polysulfone containing tertiary amine groups to fabricate hybrid membranes via the solution blending and the subsequent immersion-precipitation phase inversion process. Then the matrix was modified with zwitterions via the reaction of tertiary amine group with 1, 3-propane sultone. UF tests were conducted using the bovine serum albumin (BSA) and humic acid (HA) as the representative foulants. Results showed that both the permeability and the antifouling performance of the membranes achieved favorable promotion. Thereinto, the water flux of M-B0.4-Z membrane (pre blended with 0.4 wt% HANTs@TA-ZPEI in the casting solution and post-surface modified) exhibited 2.6 times that of the pristine membrane and the flux recovery ratio (FRR) for BSA and HA attained 93.4% and 96.1%, respectively. By the combination of blending and surface modification, both the membrane permeability and fouling resistant properties could attain remarkable promotion, which exerted the advantages of two methods and made up the deficiency of single blending method.

Green Fabrication of Tannic Acid-Inspired Magnetic Composite Nanoparticles toward Cationic Dye Capture and Selective Degradation

An environmental strategy for developing sustainable materials presents an attractive prospect for wastewater remediation. Herein, a facile, green, and economical strategy is proposed to fabricate magnetic composite nanoparticles (NPs) toward cationic dye adsorption and selective degradation. To prepare the composite TiO2-PEI-TA@Fe3O4 NPs, tannic acid (TA) and polyethyleneimine (PEI) were first used to decorate Fe3O4 NPs at aqueous solution, and then TiO2 NPs were anchored onto the surfaces of Fe3O4 NPs based on the catecholamine chemistry. The chemical composition and microstructure of the obtained NPs were systematically characterized. The NPs not only exhibited adsorption ability for the cationic dye of methylene blue (MB) but also responded to ultraviolet light to selectively degrade the adsorbed MB, and the removal (adsorption and/or degradation) ratio for MB could reach 95%. In addition, cyclic experiments showed that the removal ratio of the composite NPs for MB could still be maintained more than 85% even after five cycles. Given by the above-mentioned advantages, such a green and facile strategy for combining the adsorption and degradation methods to construct magnetic nanocomposites exhibits potential applications in cationic dye selective removal and sustainable wastewater remediation.

Highly Dual Antifouling and Antibacterial Ultrafiltration Membranes Modified with Silane Coupling Agent and Capsaicin-Mimic Moieties

Dual antifouling and antibacterial polysulfone(PSf)/polyethersulfone(PES) hybrid membranes were developed by the synergy of capsaicin-mimic N-(5-methyl acrylamide-2,3,4 hydroxy benzyl) acrylamide (AMTHBA) and vinyl triethylene (b-methoxy ethoxy) silane (VTMES). First, AMTHBA as a natural antimicrobial agent was incorporated into a casting solution via "microwave-assistance (MWA) in situ polymerization-blending" process to construct a hydroxyl-rich environment. Then, VTMES crosslinked to a hydroxyl-rich polymer matrix via hydrolytic condensation, and the influence of VTMES content on the hybrid membrane properties was systematically investigated. When the VTMES added amount was 1.0 wt %, the hybrid membrane achieved an optimal separation performance including a steady-state humic acid (HA) (5 mg/L) permeation flux of 326 L·m-2·h-1 and a rejection percentage of 97%. The antibacterial tests revealed that the hybrid membranes exhibited sustained bactericidal activity and effective inhibition of bacterial adhesion. Besides, the dual-functional membranes were clean as new after two-cycles filtration (with a cleaning efficiency of ~90%), indicating that the network silicone film on the surface benefits the foulant repellence. Hopefully, the dual-functional membranes constructed in this study can be applicable to the pretreatment stage of water treatment.

Nonadherent Zwitterionic Composite Nanofibrous Membrane with a Halloysite Nanocarrier for Sustained Wound Anti-Infection and Cutaneous Regeneration

Wound dressing synechia and sustained postoperative bacterial infection would cause serious secondary damage to nascent cutaneous tissue and impede normal regeneration of injured wound. Endowing wound dressings with nonadherent capability and long-lasting antibacterial property could optimize the postoperative wound healing conditions and promote wound tissue neogenesis, which have important clinical application value and demand. In this study, novel nanocarrier-embedded zwitterionic composite nanofibrous membranes are fabricated using the co-electrospinning/photo-cross-linking method for the purpose of painless removal and eliminating long-lasting antibacterial infection during postoperative wound therapy. The prepared membranes possess good biocompatibility, excellent antibiofouling ability against both bacteria and plasma proteins, and platelet and L929 cell adhesion. Furthermore, in vitro and in vivo antibacterial evaluations exhibit that the composite nanofibrous membranes with a sustained drug release profile could effectively inhibit bacterial proliferation for at least 16 days. Additionally, in vivo wound regeneration assessment indicates that the obtained membranes could better enhance skin regeneration than the commercial 3M Tegaderm film, which highlights the application prospect of such novel zwitterionic composite nanofibrous membranes for sustained postoperative wound anti-infection and cutaneous regeneration.

Recent advancements in polyethyleneimine-based materials and their biomedical, biotechnology, and biomaterial applications

Precise-synthesis strategies and integration approaches of bioinspired PEI-based systems, and their biomedical, biotechnology and biomaterial applications.

Intelligent antibacterial surface based on ionic liquid molecular brushes for bacterial killing and release

The prevention of bacteria-induced infections has been increasing in importance in both clinical surgery and biomedical engineering. Although great attention has been paid to designing intelligent antibacterial surfaces, the fabrication processes are still not facile and universal enough, and the antibacterial efficiencies of these surfaces are also not ideal. Herein, ionic liquid (IL) molecules of 3-(12-mercaptododecyl)-1-methyl-1H-imidazol-3-ium bromide (IL(Br)) were synthesized with the minimum inhibitory concentrations as low as 4 and 8 μg mL-1 against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), respectively. By simply immersing a polymeric substrate into the IL(Br) solution, an antibacterial surface with high killing efficiency of 99% against S. aureus (94% against E. coli) was achieved via a mussel-inspired approach. Subsequently, 97% S. aureus and 95% E. coli on the substrate could be released by simple ion-exchange of Br- with (CF3SO2)2N- due to the ion sensitivity of the IL molecular brushes. Thus, the proposed facile strategy towards a superior efficiency surface could be potentially used in intelligent antibacterial fields.

Versatile Polydopamine Platforms: Synthesis and Promising Applications for Surface Modification and Advanced Nanomedicine

As a mussel-inspired material, polydopamine (PDA), possesses many properties, such as a simple preparation process, good biocompatibility, strong adhesive property, easy functionalization, outstanding photothermal conversion efficiency, and strong quenching effect. PDA has attracted increasingly considerable attention because it provides a simple and versatile approach to functionalize material surfaces for obtaining a variety of multifunctional nanomaterials. In this review, recent significant research developments of PDA including its synthesis and polymerization mechanism, physicochemical properties, different nano/microstructures, and diverse applications are summarized and discussed. For the sections of its applications in surface modification and biomedicine, we mainly highlight the achievements in the past few years (2016-2019). The remaining challenges and future perspectives of PDA-based nanoplatforms are discussed rationally at the end. This timely and overall review should be desirable for a wide range of scientists and facilitate further development of surface coating methods and the production of PDA-based materials.

Fabrication of PMPC/PTM/PEGDA micropatterns onto polypropylene films behaving with dual functions of antifouling and antimicrobial activities

Polymer materials with high biocompatibility and versatile functions are urgently required in the biomedical field. The hydrophobic surface and inert traits of polymer materials usually encounter severe biofouling and bacterial infection which hinder the potential application of polymers as biomedical materials. Although many antifouling or antimicrobial coatings have been developed for modification of biomedical devices/implants, few can simultaneously fulfill the requirements for antimicrobial and antifouling activities. Herein, we constructed bifunctional micropatterns with antifouling and antimicrobial properties onto polypropylene (PP) films using argon plasma activation treatment, photomask technique and UV-initiated graft polymerization method. Different sizes of PMPC/PTM/PEGDA micropatterns were fabricated on PP films to yield patterned PP-PMPC/PTM/PEGDA as evidenced by infrared (IR) spectroscopy, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), where PMPC is poly(2-methacryloyloxyethyl phosphorylcholine) for enhancement of hydrophilicity and biocompatibility, PTM is poly(methacryloyloxyethyltrimethylammonium chloride) for contribution to antimicrobial activity and PEGDA is poly(ethylene glycol diacrylate) as the crosslinker. The surface hydrophilicity of patterned PP-PMPC/PTM/PEGDA was characterized by the static water contact angle test. The results showed that the PP sample with a micropattern with the size of 5 μm exhibited the best hydrophilicity. For biological assays of patterned PP-PMPC/PTM/PEGDA, the micropattern size at 5 μm performed the best for both antiplatelet adhesion and antimicrobial activities. We anticipate that this work could provide a new method for building bifunctional biomedical materials to promote the application of PP in biomedical fields.

Antifouling Properties of Silver-Zinc Oxide Polyamide Thin Film Composite Membrane and Rejection of 2-Chlorophenol and 2,4-Dichlorophenol

The silver-zinc oxide (Ag-ZnO) polyamide thin film composite (PA-TFC) membrane was prepared by interfacial polymerization. The Ag-ZnO/PA-TFC membrane was characterized by attenuated total reflectance fourier-transform infrared spectroscopy (ATR-FTIR) for polyamide functional groups and contact angle for surface hydrophilicity. The Ag-ZnO/PA-TFC membrane was further characterized by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) for morphology and surface roughness, respectively. The performance of the fabricated membrane was investigated using pure water flux, permeability, rejection, flux recovery, and fouling resistance using low molecular weight organic pollutants, 2-chlorophenol (2-CP) and 2,4-dichlorophenol (2,4-DCP). The results were compared to the neat (PA-TFC) membrane. It was observed that incorporation of Ag-ZnO nanocomposites into the PA-TFC membrane improved hydrophilicity, permeation, rejection, and fouling resistance properties of the membrane. The contact angle decreased from 62.8° to 54° for PA-TFC and the Ag-ZnO/PA-TFC membrane, respectively. The presence of Ag-ZnO enhanced permeability of the membrane from 0.9 (Lm-2h-1bar-1) to 1.9 (Lm-2h-1bar-1). Modification of the membrane with Ag-ZnO further showed an enhanced rejection of 2-CP and 2,4-DCP from 43% to 80% and 58% to 85%, respectively. The 2,4-DCP molecules were rejected more than 2-CP due to enhanced repulsive forces from the extra Cl ion. A high flux recovery of about 95% was achieved for the modified membrane compared to 64% for the neat membrane. The improved flux recovery was an indication of enhanced antifouling propensity.

Electrostatic Adsorption Behavior of Zwitterionic Copolymers on Negatively Charged Surfaces

To investigate the effect of the surface properties and the coating layer properties on surface modification via electrostatic adsorption, the electrostatic adsorption behavior of zwitterionic copolymers on negatively charged surfaces was studied. A series of positively charged zwitterionic copolymers and a series of negatively charged surfaces, including porous substrates and dense films, were fabricated. The electrostatic adsorption behavior of the zwitterionic copolymers on the negatively charged porous substrates was confirmed using the contact angles and fluorescently labeled protein adsorption experiments. The adsorption behavior of the zwitterionic copolymers on the negatively charged dense films was confirmed using quartz crystal microbalance determination and a fluorescently labeled protein adsorption experiment. The results indicated that a lower charge density on the zwitterionic copolymer brings about a higher adsorption mass on the charged surface, whereas an extremely low charge density on the coating layer results in a lower adsorption mass on the charged surface, due to weak interaction. A high density of the film surface charge is beneficial for surface adsorption, whereas an extremely high density of the film surface charge leads to low surface adsorption due to steric hindrance of the negatively charged sites. This work provides an insight into the best strategy for surface modification via electrostatic adsorption.

Mussel-Inspired Surface Functionalization of AEM for Simultaneously Improved Monovalent Anion Selectivity and Antibacterial Property

A facile membrane surface modification process for improving permselectivity and antimicrobial property was proposed. A polydopamine (PDA) coating was firstly fabricated on pristine anion exchange membrane (AEM), followed by in situ reduction of Ag without adding any extra reductant. Finally, 2,5-diaminobenzene sulfonic acid (DSA) was grafted onto PDA layer via Michael addition reaction. The as-prepared AEM exhibited improved permselectivity (from 0.60 to 1.43) and effective inhibition of bacterial growth. In addition, the result of the long-term (90-h continuous electrodialysis) test expressed the excellent durability of the modified layer on membrane surface, because the concentration of Cl- and SO₄²- in diluted chamber fluctuated ~0.024 and 0.030 mol·L-1 with no distinct decline. The method described in this work makes the full use of multifunctional PDA layer (polymer-like coating, in situ reduction and post-organic reaction), and a rational design of functional AEM was established for better practical application.

Codeposition of Polydopamine and Zwitterionic Polymer on Membrane Surface with Enhanced Stability and Antibiofouling Property

Although abundant works have been developed in mussel-inspired antifouling coatings, most of them suffer from poor chemical stability, especially in a strongly alkaline environment. Herein, we report a robust one-step mussel-inspired method to construct a highly chemical stable and excellent antibiofouling membrane surface coating with a highly efficient codeposition of polydopamine (PDA) with zwitterionic polymer. In the study, PDA and polyethylenimine-quaternized derivative (PEI-S) are codeposited on the surface of poly(ether sulfone) (PES) ultrafiltration membrane in water at room temperature. In contrast to individual PDA coating, the obtained PDA/PEI-S coating exhibits excellent chemical stability even in a strongly alkaline environment owing to the cross-linking and unexpected cation-π interaction between the PEI-S and PDA. Thanks to the introduction of PEI-S, systematic protein adsorption tests and bacteria adhesion experiments demonstrated that the surfaces could prevent bovine serum fibrinogen and lysozyme adsorption and could reduce Gram-positive bacteria S. aureus and Gram-negative bacteria E. coli adhesion. Benefiting from the versatile functionality of PDA, the proposed strategy is not limited to PES membrane surface but also others such as poly(ethylene terephthalate) sheets and commercial polypropylene microfiltration membranes. Overall, this work enriches the exploration of a remarkable coating with enhanced stability and excellent antifouling property via a facile, robust, and material-independent approach to modifying the membrane surface.

A novel nanofiltration membrane with simultaneously enhanced antifouling and antibacterial properties

A novel nanofiltration membrane is prepared by using polydopamine (PDA) and hydroxyl propyl trimethyl ammonium chloride chitosan (HACC) mixed with chitosan (CN) and chelated silver (Ag) nanoparticles.