Ultrasonic enhancement of microdroplet-based interfacial reaction for improving the synthesis of Ag2S QDs

Ag2S quantum dots (QDs) have aroused extensive concerns in intravital imaging field due to their merits of narrow bandgap, low biological toxicity and decent fluorescence emission properties in the second near-infrared (NIR-II) window. However, low quantum yield (QY) and poor uniformity of Ag2S QDs are still main obstacles for its application. In this work, a novel strategy of utilizing ultrasonic field is presented, which can enhance the microdroplet-based interfacial synthesis of Ag2S QDs. The ultrasound increases the presence of ions at the reaction sites by enhancing the ion mobility in the microchennels. Therefore, the QY is enhanced from 2.33 % (optimal QY without ultrasound) to 8.46 %, which is the highest value of Ag2S ever reported without ion-doping. Also, the decrease of the corresponding full width at half maximum (FWHM) from 312 nm to 144 nm indicates the obvious uniformity improvement of the obtained QDs. Further mechanism exploration illustrates that ultrasonic cavitation significantly increases the interfacial reaction sites by splitting the droplets. Meanwhile, the acoustic flow field strengthens the ion renewal at the droplet interface. Consequently, the mass transfer coefficient increases by more than 500 %, which is favorable to improve both the QY and quality of Ag2S QDs. This work serves both fundamental research and practical production for the synthesis of Ag2S QDs.

Magnetic nanoparticles and clusters for magnetic hyperthermia: optimizing their heat performance and developing combinatorial therapies to tackle cancer

Magnetic hyperthermia (MHT) is a therapeutic modality for the treatment of solid tumors that has now accumulated more than 30 years of experience. In the ongoing MHT clinical trials for the treatment of brain and prostate tumors, iron oxide nanoparticles are employed as intra-tumoral MHT agents under a patient-safe 100 kHz alternating magnetic field (AMF) applicator. Although iron oxide nanoparticles are currently approved by FDA for imaging purposes and for the treatment of anemia, magnetic nanoparticles (MNPs) designed for the efficient treatment of MHT must respond to specific physical-chemical properties in terms of magneto-energy conversion, heat dose production, surface chemistry and aggregation state. Accordingly, in the past few decades, these requirements have boosted the development of a new generation of MNPs specifically aimed for MHT. In this review, we present an overview on MNPs and their assemblies produced via different synthetic routes, focusing on which MNP features have allowed unprecedented heating efficiency levels to be achieved in MHT and highlighting nanoplatforms that prevent magnetic heat loss in the intracellular environment. Moreover, we review the advances on MNP-based nanoplatforms that embrace the concept of multimodal therapy, which aims to combine MHT with chemotherapy, radiotherapy, immunotherapy, photodynamic or phototherapy. Next, for a better control of the therapeutic temperature at the tumor, we focus on the studies that have optimized MNPs to maintain gold-standard MHT performance and are also tackling MNP imaging with the aim to quantitatively assess the amount of nanoparticles accumulated at the tumor site and regulate the MHT field conditions. To conclude, future perspectives with guidance on how to advance MHT therapy will be provided.

Targeted Nanoscale 3D Thermal Imaging of Tumor Cell Surface with Functionalized Quantum Dots

Measuring the changes in tumor cell surface temperature can provide insights into cellular metabolism and pathological features, which is significant for targeted chemotherapy and hyperthermic therapy. However, conventional micro-nano scale methods are invasive and can only measure the temperature of cells across a single plane, which excludes specific organelles. In this study, fluorescence quantum dots (QDs) are functionalized with the membrane transport protein transferrin (Tf) as a thermo-sensor specific for tumor cell membrane. The covalent conjugation is optimized to maintain the relative fluorescence intensity of the Tf-QDs to >90%. In addition, the Tf-QDs undergo changes in the fluorescence spectra as a function of temperature, underscoring its thermo-sensor function. Double helix point spread function imaging optical path is designed to locate the probe at nanoscale, and 3D thermal imaging technology is proposed to measure the local temperature distribution and direction of heat flux on the tumor cell surface. This novel targeted nanoscale 3D thermometry method can be a highly promising tool for measuring the local and global temperature distribution across intracellular organelles.

Cell Temperature Measurement for Biometabolism Monitoring

Temperature is an important factor in the process of life, as thermal energy transfer participates in all biological events in organisms. Due to technical limitations, there is still a lot more information to be explored regarding the correlation between life activities and temperature changes. In recent years, the emergence of a variety of new temperature measurement methods has facilitated further research in this field. Here, we introduce the latest advances in temperature sensors for biological detection and their related applications in metabolic research. Various technologies are discussed in terms of their advantages and shortcomings, and future prospects are presented.

Tailoring the Heterostructure of Colloidal Quantum Dots for Ratiometric Optical Nanothermometry

Colloidal quantum dots (QDs) are a fascinating class of semiconducting nanocrystals, thanks to their optical properties tunable through size and composition, and simple synthesis methods. Recently, colloidal double-emission QDs have been successfully applied as competitive optical temperature sensors, since they exhibit structure-tunable double emission, temperature-dependent photoluminescence, high quantum yield, and excellent photostability. Until now, QDs have been used as nanothermometers for in vivo biological thermal imaging, and thermal mapping in complex environments at the sub-microscale to nanoscale range. In this Review, recent progress for QD-based nanothermometers is highlighted and perspectives for future work are described.

Multilayered Dual Functional SiO2@Au@SiO2@QD Nanoparticles for Simultaneous Intracellular Heating and Temperature Measurement

This paper discusses synthesis and application of dual functional SiO₂@Au@SiO₂@QD composite nanoparticles for integrated intracellular heating with temperature motoring. The particles are of multilayered concentric structure, consisting of Au nanoshells covered with quantum dots, with the former for infrared heating through localized surface plasma resonance while the later for temperature monitoring. The key to integrate plasmonic-heating/thermal-monitoring on a single composite nanoparticle is to ensure that the quantum dots be separated at a certain distance away from the Au shell surface in order to ensure a detectable quantum yield. Direct attachment of the quantum dots onto the Au shell would render the quantum dots practically functionless for temperature monitoring. To integrate quantum dots into Au nanoshells, a quantum quenching barrier of SiO₂ was created by modifying a Stöber-like process. Materials, optical and thermal characterization was made of these composite nanoparticles. Cellular uptake of the nanoparticles was discussed. Experiments were performed on simultaneous in vitro heating and temperature monitoring in a cell internalized with the dual-functional SiO₂@Au@SiO₂@QD composite nanoparticles.

Quantum 3D thermal imaging at the micro-nanoscale

Real-time and accurate measurement of three-dimensional (3D) temperature field gradient maps of cells and tissues would provide an effective experimental method for analyzing the coupled correlation between metabolism and heat, as well as exploring the thermodynamic properties of nanoparticles under complex environments. In this work, a new principle of quantum 3D thermal imaging is proposed. The photoluminescence principle of quantum dots is expounded and CdTe QDs are prepared by aqueous phase synthesis. Fluorescence spectral characteristics of QDs at different temperatures are studied. The optimized algorithm of the optical spot double helix point spread function is proposed to improve the imaging, where optimized light energy increased by 27.36%. The design scheme of a quantum 3D thermal imaging system is presented. The measurement range is (-8 mm, +8 mm). The temperature is calculated according to the temperature-heat curve of quantum dots. The double helix point spread function has converted the defocus distance of QDs into the rotation angle of the double optical spot, thereby determining its position. The experimental results reveal that real-time 3D tracking and temperature measurements of quantum dots at the micro-nanoscale are achieved. Overall, the proposed nano-scale 3D quantum thermal imaging system with high-resolution may provide a new research direction and exploration of many frontier fields.