Nanosensor based approaches for quantitative detection of heparin

Heparin, being a widely employed anticoagulant in numerus clinical complications, requires strict quantification and qualitative screening to ensure the safety of patients from potential threat of thrombocytopenia. However, the intricacy of heparin's chemical structures and low abundance hinders the precise monitoring of its level and quality in clinical settings. Conventional laboratory assays have limitations in sensitivity and specificity, necessitating the development of innovative approaches. In this context, nanosensors emerged as a promising solution due to enhanced sensitivity, selectivity, and ability to detect heparin even at low concentrations. This review delves into a range of sensing approaches including colorimetric, fluorometric, surface-enhanced Raman spectroscopy, and electrochemical techniques using different types of nanomaterials, thus providing insights of its principles, capabilities, and limitations. Moreover, integration of smart-phone with nanosensors for point of care diagnostics has also been explored. Additionally, recent advances in nanopore technologies, artificial intelligence (AI) and machine learning (ML) have been discussed offering specificity against contaminants present in heparin to ensure its quality. By consolidating current knowledge and highlighting the potential of nanosensors, this review aims to contribute to the advancement of efficient, reliable, and economical heparin detection methods providing improved patient care.

Preparation of gold nanoparticles loaded MOF-199 for SERS detection of 5-hydroxyindole-3-acetic acid in serum

5-Hydroxyindole-3-acetic acid (5-HIAA) is regarded as a biomarker for diagnosis of carcinoid tumors, and it is of great significance to developing a precision assay for monitoring 5-HIAA levels. In this work, gold nanoparticles loading on the surface of MOF-199 (Au NPs/MOF-199) is prepared to propose a surface enhanced Raman scattering (SERS) assay for 5-HIAA. When 4-mercaptopyridine (4-MPy) is used as a SERS probe, on Au NPs/MOF-199, limit of detection (LOD) at 10-9 mol/L can be achieved. In addition, Au NPs/MOF-199 substrate with good preparation reproducibility shows long-term storage stability at 4 °C. Under optimal condition, the Au NPs/MOF-199-based SERS method is applied to determine 5-HIAA in serum. The concentration linear range is from 10-9 to 10-5 mol/L and LOD is of 6.40 × 10-11 mol/L. Much importantly, Au NPs/MOF-199 substrate exhibits specific response toward 5-HIAA against other metabolites in the serum due to the capturing selectivity from porous MOF-199. The recoveries obtained on spiked human serum samples locate in the span from 94.30% to 106.00% with RSD of 4.01-7.43%. Au NPs/MOF-199-based SERS sensing strategy is a promising avenue for on-field monitoring biomedical species for clinic diagnosis purpose.

Surface-enhanced Raman spectroscopy as a powerful method for the analysis of Chinese herbal medicines

Chinese herbal medicines (CHMs) derived from nature have received increasing attention and become more popular. Due to their diverse production processes, complex ingredients, and different storage conditions, it is highly desirable to develop simple, rapid, efficient and trace detection methods to ensure the drug quality. Surface-enhanced Raman spectroscopy has the advantages of being time-saving, non-destructive, usable in aqueous environments, and highly compatible with various biomolecular samples, providing a promising analytical method for CHM. In this review, we outline the major advances in the application of SERS to the identification of raw materials, detection of bioactive constituents, characterization of adulterants, and detection of contaminants. This clearly shows that SERS has strong potential in the quality control of CHM, which greatly promotes the modernization of CHM.

Concepts and principles of self-n-doping in perylene diimide chromophores for applications in biochemistry, energy harvesting, energy storage, and catalysis

Self-doping is an essential method of increasing carrier concentrations in organic electronics that eliminates the need to tailor host-dopant miscibility, a necessary step when employing molecular dopants. Self-n-doping can be accomplished using amines or ammonium counterions as an electron source, which are being incorporated into an ever-increasingly diverse range of organic materials spanning many applications. Self-n-doped materials have demonstrated exemplary and, in many cases, benchmark performances in a variety of applications. However, an in-depth review of the method is lacking. Perylene diimide (PDI) chromophores are an important mainstay in the semiconductor literature with well-known structure-function characteristics and are also one of the most widely utilized scaffolds for self-n-doping. In this review, we describe the unique properties of self-n-doped PDIs, delineate structure-function relationships, and discuss self-n-doped PDI performance in a range of applications. In particular, the impact of amine/ammonium incorporation into the PDI scaffold on doping efficiency is reviewed with regard to attachment mode, tether distance, counterion selection, and steric encumbrance. Self-n-doped PDIs are a unique set of PDI structural derivatives whose properties are amenable to a broad range of applications such as biochemistry, solar energy conversion, thermoelectric modules, batteries, and photocatalysis. Finally, we discuss challenges and the future outlook of self-n-doping principles.

Electrochemically activated carbon-halogen bond cleavage and C-C coupling monitored by in situ shell-isolated nanoparticle-enhanced Raman spectroscopy

The electroreductive cleavage of carbon-halogen bonds has attracted increasing attention in both electrosynthesis and pollution remediation. Herein, by employing the in situ electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) technique, we have successfully investigated the electroreductive dehalogenation process of aryl halides with the thiol group on a smooth Au electrode in aqueous solution at different pH values. The obtained potential-dependent Raman spectra directly reveal a mixture of the reduction products 4,4'-biphenyldithiol (BPDT) and thiophenol (TP). The conversion ratios of the C-Cl and C-Br bonds at pH = 7 are 37% and 55%, respectively. Furthermore, quantitative analysis of the intensity variations of ν(C-Cl), ν(C-Br) and aromatic ν(CC) stretching modes suggests electroreductive dehalogenation via both direct electron transfer reduction and electrocatalytic hydrodehalogenation. Molecular evidence for the C-C cross coupling process through TP reaction with benzene free radical intermediates is found at negative potentials, which leads to the increasing selectivity of biphenyl products.

A fiber optic photoacoustic sensor for real-time heparin monitoring

Heparin is a common anticoagulant, but heparin overdose is a common intensive care unit (ICU) medication error due to the narrow therapeutic window of heparin. Conventional methods to monitoring heparin suffer from long turnaround time, the need for skilled personnel, and low frequency of sampling. To overcome these issues, we describe here a fiber optic photoacoustic (PA) sensor for real-time heparin monitoring. The proposed sensor was validated with in vitro testing and in a simulated in vivo model using the following samples: (1) phosphate-buffered saline (PBS), (2) spiked human plasma, (3) spiked whole human blood, and (4) clinical samples from patients treated with heparin. Samples were validated by comparing the PA signal to the activated partial thromboplastin time (aPTT) as well as the activated clotting time (ACT). Importantly, the proposed sensor has a short turnaround time (3 min) and a limit of detection of 0.18 U/ml in whole human blood. The PA signal is linear with heparin dose and correlates with the aPTT value (Pearson's r = 0.99). The PA signal from 32 clinical samples collected from eight patients linearly correlated with ACT values (Pearson's r = 0.89, in vitro; Pearson's r = 0.93, simulated in vivo). The PA signal was also validated against the cumulative heparin dose (Pearson's r = 0.94, in vitro; Pearson's r = 0.96, simulated in vivo). This approach could have applications in both in vitro and real-time in vivo heparin monitoring.

An electrostatically regulated organic self-assembly for rapid and sensitive detection of heparin in serum

Heparin (Hep) is a highly negatively charged linear glycosaminoglycan involved in various physiological processes, especially blood coagulation. Hep is also a first-line drug for anticoagulation and prevention of thromboembolism, but its overdose will cause serious side effects. Herein, we designed a long-wavelength double-charged cationic fluorescent probe PYPN, and studied its aggregation state and detection performance for Hep. PYPN was readily synthesized through a one-step reaction without complicated purification. In aqueous medium, PYPN molecules with an amphiphilic structure spontaneously form nano-assemblies, which can be immediately decomposed by Hep due to the formation of a PYPN-Hep complex based on electrostatic attraction. The assembly shows a fast, sensitive and ratiometric fluorescence response to Hep, without being obviously interfered by other compounds. In various serum matrices, the fluorescence intensity ratio F₆₁₀/F₄₇₀ has a good linearity with Hep concentration (0-12 μg mL^-1), and the detection limit (0.11-0.12 U mL^-1) is lower than the minimum concentration (0.2 U mL^-1) used in clinical treatment. Our study provides an easy-to-prepare and feasible tool for the selective and sensitive quantification of Hep in serum.

Ordered gold-coated glass nano-sting array with large density tips as highly SERS-active chips for detection of trace organophosphorous toxicant

A simple and cost-effective route to fabricating gold-coated glass nano-stings' arrays is presented for highly efficient surface enhanced Raman spectroscopy (SERS) chips via reactive ion etching of the glass slide covered with polystyrene (PS) colloidal monolayer and sputtering deposition of gold on it. The as-fabricated SERS chips consist of the nearly-hemispherical particles with submicron-size, which are hexagonally arranged into the ordered arrays. There are many short and long Au-coated glass nano-stings standing vertically on the hemispherical particles, showing high density tips (up to 7.0 × 10³ μm^-2). The formation of such gold-coated glass hierarchically structured array is attributed to the geometry of PS colloidal monolayer and the nanoscale roughness of glass slide's surface. Further, it has been demonstrated that such gold-coated glass array chip is highly SERS-active and can be utilized to detect trace organophosphorous toxicant with the limit below ppt level and good reproducibility in measurements. The intensity of the Raman peak shows the linear relation, in logarithmic scale, with the organophosphorous concentration from ppt to ppm level, exhibiting the possibility of quantitative detection in a large concentration range. This work has demonstrated the cost-effective method to fabricate the high performance SERS chips for trace detection of toxic molecules.

Au nanoparticles as label-free competitive reporters for sensitivity enhanced fiber-optic SPR heparin sensor

A label-free Au NPs-enhanced surface plasmon resonance (SPR) sensor was developed for the ultrasensitive detection of heparin based on competitive adsorption behavior of heparin and Au NPs on the poly (dimethyl-diallylammonium chloride) (PDDA)-modified optical fiber surface and the corresponding change in the resonance wavelength of SPR. Due to the high affinity between heparin and PDDA, the present senor shows good analytical performance with respect to heparin detection. Two obvious advantages of the proposed heparin sensor over other reported methods are: its much wider linear concentration range (10^-6-10^-10 g/mL) and lower limit of detection (0.0257 ng/mL). The analysis of heparin in serum demonstrated that the present sensor exhibited high sensitivity and selectivity. It should be noted that the sensing strategy takes advantage of a portable fiber-optic SPR sensing system and avoids the need for complex processes for labeled-Au NPs, and thus the present sensor promises to be a practical tool for the point-of-care monitoring of heparin.

Lost in (Clinical) Translation: Recent Advances in Heparin Neutralization and Monitoring

The heparin family, which includes unfractionated heparin, low-molecular heparin, and fondaparinux, is a class of drugs clinically used as intravenous blood thinners. To date, issues related to both the reversal of anticoagulation and the blood level determination of the anticoagulant at the point-of-care remain: while the only U.S. Food and Drug Administration (FDA) approved antidote for heparin displays serious efficacy and safety drawbacks, the current assays for heparin monitoring are indirect measurements subject to their own limitations and variations. Herein, we provide an update on the numerous recent chemical approaches to tackle these issues, from which it is clear that some new antidotes and sensors for heparin certainly have the potential to exceed current clinical standards. This review aims to review a field that requires close collaborations between physicians, biologists, and chemists in order to foster advances toward clinical translation.

Colorimetric sensing strategy for heparin assay based on PDDA-induced aggregation of gold nanoparticles

Herein, we report a highly sensitive colorimetric sensor for the detection of heparin based on its anti-aggregation effect of the PDDA-gold nanoparticle colloidal system. PDDA-induced non-crosslinking aggregation of gold nanoparticles is firstly investigated and the phenomenon of heparin mediated color recovery is then observed, which can be used to indicate the concentration of heparin. This method is proved to be highly sensitive and selective. Moreover, it has been successfully applied to determine human blood serum samples, the results of which demonstrate great potential practical utility with simple operations.

CTAB-triggered Ag aggregates for reproducible SERS analysis of urinary polycyclic aromatic hydrocarbon metabolites

We have demonstrated a simple SERS assay for urinary hydroxylated polycyclic aromatic hydrocarbons (OH-PAHs) with high sensitivity and reproducibility.