Single-system based discriminative optical sensors: different strategies and versatile applications

PBI derivatives/surfactant-based fluorescent ensembles: Sensing of multiple aminoglycoside antibiotics and interaction mechanism studies

Fluorescent aggregates and ensembles have been widely applied in fabrication of fluorescent sensors due to their capacity of encapsulating fluorophores and modulating their photophysical properties. In the present work, fluorescent ensembles based on anionic surfactant SDS assemblies and perylene derivatives (PBIs) were particularly constructed. Three newly synthesized neutral PBI derivatives with different structures, PO, PC1 and PC2, were used for the purpose to evaluate probe structure influence on constructing fluorescent ensembles. The one with hydrophilic side chains, PO, experienced distinct photophysical modulation effect by SDS assemblies. The ensemble based on PO@SDS assemblies displayed effective fluorescence variation to antibiotic aminoglycosides (AGs). To improve cross-reactivity and discrimination capability of ensembles, a second probe, coumarin, was introduced into PO@SDS assemblies. The resultant ternary sensor, CM-PO@SDS, exhibited good qualitative and quantitative detection capabilities, and achieved differentiation of eight AGs and mixed AG samples both in aqueous solution and actual biological fluid, like human serum. Sensing mechanism studies revealed that hydrogen bonding, electrostatic and hydrophobic interactions are involved in the sensing process. This surfactant-based fluorescent ensemble provides a simple and feasible method for assessing AGs levels. Meanwhile, this work may provide some insights to design reasonable probes for constructing effective single-system based discriminative fluorescent amphiphilic sensors.

Reconfigurable Optical Sensor for Metal-Ion-Mediated Label-Free Recognition of Different Biomolecular Targets

Reconfiguration of chemical sensors, intended as the capacity of the sensor to adapt to novel operational scenarios, e.g., new target analytes, is potentially game changing and would enable rapid and cost-effective reaction to dynamic changes occurring at healthcare, environmental, and industrial levels. Yet, it is still a challenge, and rare examples of sensor reconfiguration have been reported to date. Here, we report on a reconfigurable label-free optical sensor leveraging the versatile immobilization of metal ions through a chelating agent on a nanostructured porous silica (PSiO2) optical transducer for the detection of different biomolecules. First, we show the reversible grafting of different metal ions on the PSiO2 surface, namely, Ni2+, Cu2+, Zn2+, and Fe3+, which can mediate the interaction with different biomolecules and be switched under mild conditions. Then, we demonstrate reconfiguration of the sensor at two levels: 1) switching of the metal ions on the PSiO2 surface from Cu2+ to Zn2+ and testing the ability of Cu2+-functionalized and Zn2+-reconfigured devices for the sensing of the dipeptide carnosine (CAR), leveraging the well-known chelating ability of CAR toward divalent metal ions; and 2) reconfiguration of the Cu2+-functionalized PSiO2 sensor for a different target analyte, namely, the nucleotide adenosine triphosphate (ATP), switching Cu2+ with Fe3+ ions to exploit the interaction with ATP through phosphate groups. The Cu2+-functionalized and Zn2+-reconfigured sensors show effective sensing performance in CAR detection, also evaluated in tissue samples from murine brain, and so does the Fe3+-reconfigured sensor toward ATP, thus demonstrating effective reconfiguration of the sensor with the proposed surface chemistry.

A multi-wavelength cross-reactive fluorescent sensor ensemble for fingerprinting flavonoids in serum and urine

Flavonoids are a kind of natural polyphenols which are closely related to human health, and the identification of flavonoids with similar structures is an important but difficult issue. We herein easily constructed a powerful fluorescent sensor ensemble by using surfactant cetyltrimethylammoniumbromide (CTAB) encapsulating two commercially available fluorescent probes (F1 and F2) with multi-wavelength emission. Fluorescence measurements illustrate the present sensor ensemble exhibits turn-off responses to flavones and flavonols but ratiometric responses to isoflavones, owing to different FRET processes. The heat map and linear discriminant analysis (LDA) results show that this single sensor can effectively distinguish 6 flavonoids belong to three subgroups by collecting the fluorescence variation at four typical wavelengths. Moreover, it can be applied to identify different flavonoids even in biofluids like serum and urine, providing potential practical application.

Monosystem Discriminative Sensor toward Inorganic Anions via Incorporating Three Different Luminescent Channels in Metal-Organic Frameworks

Because there are great demands of distinguishing multiple chemically similar analytes, chemical sensors for multivariate analyses have been developed rapidly in the past few decades. However, designing luminescent discriminative sensors based on a monosystem has been a challenge until now. In this work, we first develop a triemitting luminescent discriminative platform named RGB@TLU-2 with three different emission centers: blue-emitting center (BDC-NH₂), green-emitting (Tb@BDC-SO₃^-), and red-emitting center (rhodamine B, RhB). The different luminescent mechanisms (ligand emission, LMET emission, guest emission) in these emission centers endow RGB@TLU-2 with high cross-reactivity, which is essential for discriminating applications. To balance the three luminescent centers, all variables in the synthesis process are optimized carefully. Surprisingly, the RGB@TLU-2 shows a variety of luminescent response patterns when immersed into 12 inorganic anions. Two unsupervised multidimensional analysis methods, (principal component analysis and hierarchical cluster analysis), are used to explore the relationship between these anions. On the basis of the luminescent response of analytes, 5 response modes are obtained and 12 inorganic anions are classified into 6 groups. The sensing mechanisms are discussed in detail. Detection limits of typical anions Cr₂O₇^2-, PO₄^3-, ClO^-, and NO₂^- are calculated as 2.895 × 10^-8, 6.353 × 10^-6, 1.134 × 10^-5, and 4.56 × 10^-4 mol/L, respectively. Furthermore, the RGB@TLU-2 also shows the ability to distinguish 4 (Fe³⁺, Fe²⁺, Cu²⁺ and Cr³⁺) of 12 metal ions and 3 (Trp, Pro, and Arg) of 11 amino acids.

Metal-Based G-Quadruplex Binders for Cancer Theranostics

The ability of fluorescent small molecules, such as metal complexes, to selectively recognize G-quadruplex (G4) structures has opened a route to develop new probes for the visualization of these DNA structures in cells. The main goal of this review is to update the most recent research efforts towards the development of novel cancer theranostic agents using this type of metal-based probes that specifically recognize G4 structures. This encompassed a comprehensive overview of the most significant progress in the field, namely based on complexes with Cu, Pt, and Ru that are among the most studied metals to obtain this class of molecules. It is also discussed the potential interest of obtaining G4-binders with medical radiometals (e.g., 99mTc, 111In, 64Cu, 195mPt) suitable for diagnostic and/or therapeutic applications within nuclear medicine modalities, in order to enable their theranostic potential.

Fluorescent Ensemble Sensors and Arrays Based on Surfactant Aggregates Encapsulating Pyrene-Derived Fluorophores for Differentiation Applications

Surfactant assemblies have drawn great attention in fabricating fluorescent sensors as they can provide advantages such as easy preparation, low cost, aqueous detection, high fluorescence stability, high sensitivity to external stimuli, etc. We have devoted the past few years to fluorescent cross-reactive sensors and arrays that are advantageous in differentiating similar analytes and analyzing mixed samples. In this Spotlight on Applications, we introduce our recent advances in developing surfactant assembly-based fluorescent sensors and arrays for discrimination applications. Besides using surfactant assemblies encapsulating fluorophores to fabricate multiple-element-based sensor arrays, we particularly proposed to take advantage of modulation effect of dynamic surfactant assemblies on the photophysical properties of encapsulated fluorophores to construct single-system-based discriminative sensors, which have been successfully applied in differentiation of multiple metal ions and various proteins. The applications of surfactant assembly-based sensors for the detection and discrimination of thiols, amino acids, and explosives are also introduced. Finally, the prospects of further efforts for improving surfactant ensemble sensors and their challenges are discussed.

Array-Based Discriminative Optical Biosensors for Identifying Multiple Proteins in Aqueous Solution and Biofluids

Identification of proteins is an important issue both in medical research and in clinical practice as a large number of proteins are closely related to various diseases. Optical sensor arrays with recognition ability have been flourished to apply for distinguishing multiple chemically or structurally similar analytes and analyzing unknown or mixed samples. This review gives an overview of the recent development of array-based discriminative optical biosensors for recognizing proteins and their applications in real samples. Based on the number of sensor elements and the complexity of constructing array-based discriminative systems, these biosensors can be divided into three categories, which include multi-element-based sensor arrays, environment-sensitive sensor arrays and multi-wavelength-based single sensing systems. For each strategy, the construction of sensing platform and detection mechanism are particularly introduced. Meanwhile, the differences and connections between different strategies were discussed. An understanding of these aspects may help to facilitate the development of novel discriminative biosensors and expand their application prospects.

Multistage Signals Based on Cyclic Chemiluminescence for Decoding Complex Samples

Identification of complex samples presents a difficult challenge for modern analytical techniques, and the differentiation among closely similar mixtures often remains indeterminate. In this article, we designed a simplified cyclic chemiluminescence (CCL) system that is able to measure multistage signals in a single sample injection. The system was used to investigate the CCL reactions of the binary, ternary, and multicomponent mixtures. Results showed that each mixture has a unique exponential decay equation (EDE) with a constant decay coefficient (k-value) to describe the change law of its multistage signals. Further studies found that different brands of liquor, beer, toner, and baby powder have different k-values, and the same brand of the commodities between different batches have the same k-values, which allows facile identification of these complex samples. We then used different catalysts to design digital codes of the k-value for further improving the identifying ability of CCL. Moreover, the multistage signals are like fingerprints and could be used for linear discriminate analysis, which provides another complementary approach for identification of complex samples. Finally, we demonstrated that CCL shows potential applications in certification and quality assurance according to the change of the k-values of the sample. This work demonstrates that excellent discrimination ability of CCL for the identification of complex samples and provides a promising technology for quality assurance.

Pattern recognition of toxic metal ions using a single-probe thiocoumarin array

A thiocoumarin that exhibits varying fluorescence responses to metal ions in different solvents can be used in a single-probe multiple-solvent array for distinguishing metal ions.