A novel "signal-on" photoelectrochemical sensor for ultrasensitive detection of alkaline phosphatase activity based on a TiO2/g-C3N4 heterojunction

Ti3C2@UiO-TCPP Schottky junction photoelectrochemical sensor for detecting alkaline phosphatase through the steric hindrance effect of phosphopeptide

Alkaline phosphatase (ALP) is a major biomarker for clinical diagnosis, but detection methods of ALP are limited in sensitivity and selectivity. In this paper, a novel method for ALP determination is proposed. A photoelectrochemical (PEC) sensor was prepared by growing UiO-tetratopic tetrakis (4-carbox-yphenyl) porphyrin (TCPP) in situ between layered Ti3C2 through a one-pot hydrothermal method. The obtained Schottky heterojunction photoelectric material Ti3C2@UiO-TCPP not only has a large light absorption range but also greatly improves the efficiency of photogenerated electron hole separation and thereby enhances sensitivity for PEC detection. The phosphate group on the phosphorylated polypeptide was utilized to form a Zr-O-P bond with the zirconium ion on UiO-66, and then photocurrent decreases due to the steric hindrance effect of phosphorylated polypeptides, that is, the hindrance of electron transfer between the photoelectric material and a solution. The specific interaction between ALP and phosphorylated polypeptides shears the bond between phosphate and zirconium ion on UiO-66 in the peptides then weakens the hindrance effect and increases the photocurrent, thus realizing ALP detection. The linear range of ALP is 0.03-10,000 U·L-1, and the detection limit is 0.012 U·L-1. The method is highly sensitive and selective, and has been applied in detection of ALP in serum samples.

Preparation of high-efficiency titanium ion immobilized magnetic graphite nitride nanocomposite for phosphopeptide enrichment

BACKGROUND

Protein phosphorylation has been implicated in life processes including molecular interaction, protein structure transformation, and malignant disease. An in-depth study of protein phosphorylation may provide vital information for the discovery of early biomarkers. Mass spectrometry (MS)-based techniques have become an important method for phosphopeptide identification. Nevertheless, direct detection remains challenging because of the low ionization efficiency of phosphopeptides and serious interference from non-phosphopeptides. There is a great need for an efficient enrichment strategy to analyze protein phosphorylation prior to MS analysis.

RESULTS

In this study, a novel nanocomposite was prepared by introducing titanium ions into two-dimensional magnetic graphite nitride. The nanocomposite was combined with immobilized metal ion affinity chromatography (IMAC) and anion-exchange chromatography mechanisms for phosphoproteome research. The nanocomposite had the advantages of a large specific surface (412.9 m2 g-1), positive electricity (175.44 mV), and excellent magnetic property (35.7 emu g-1). Moreover, it presented satisfactory selectivity (α-casein:β-casein:bovine serum albumin = 1:1:5000), a low detection limit (0.02 fmol), great recyclability (10 cycles), and high recovery (92.8%). The nanocomposite demonstrated great practicability for phosphopeptides from non-fat milk, human serum, and saliva. Further, the nanocomposite was applied to enrich phosphopeptides from a more complicated specimen, A549 cell lysate. A total of 890 phosphopeptides mapping to 564 phosphoproteins were successfully detected with nano LC-MS.

SIGNIFICANCE

We successfully designed and developed an efficient analysis platform for phosphopeptides, which includes protein digestion, phosphopeptide enrichment, and MS detection. The MS-based enrichment platform was further used to analyze phosphopeptides from complicated bio-samples. This work paves the way for the design and preparation of graphite nitride-based IMAC materials for phosphoproteome analysis.

Serum-Based Detection of Liver Pathology Using a Fluorogenic Alkaline Phosphatase Probe

Development of "ultrahigh contrast" fluorogenic probes for trapping alkaline phosphatase (ALP) activities in human serum is highly desirable for clinical auxiliary diagnosis for hepatobiliary diseases. However, the intrinsic dilemma of incomplete ionization of intramolecular charge transfer (ICT)-based ALP fluorophores and autofluorescence interference of serum result in low sensitivity and accuracy. Given that unique halogen effects could lead to a drastic decrease in the pKa value and a significant enhancement in the fluorescence quantum yield, herein we report an enzyme-activatable near-infrared probe based on a difluoro-substituted dicyanomethylene-4H-chromenep for achieving fluorescent quantification of human serum ALP. Rational design strategy is demonstrated by altering the substituted halogen groups to well regulate the pKa for meeting the physiological precondition. Owing to the complete ionization at pH 7.4 with tremendous fluorescence enhancement, the difluoro-substituted DCM-2F-HP manifests a linear relationship between the emission intensity and ALP concentration in both solution and serum samples. Along with measuring 77 human serum samples, the DCM-2F-HP based fluorescence method not only exhibits significant correlations with clinical colorimetry, but also distinguishes ALP patients from healthy volunteers, as well as assessing the progress of liver disease, thus providing a potential toolbox for quantitatively detecting ALP and warning the stage of hepatopathy.

Progress in Electrochemical Immunosensors with Alkaline Phosphatase as the Signal Label

Electrochemical immunosensors have shown great potential in clinical diagnosis, food safety, environmental protection, and other fields. The feasible and innovative combination of enzyme catalysis and other signal-amplified elements has yielded exciting progress in the development of electrochemical immunosensors. Alkaline phosphatase (ALP) is one of the most popularly used enzyme reporters in bioassays. It has been widely utilized to design electrochemical immunosensors owing to its significant advantages (e.g., high catalytic activity, high turnover number, and excellent substrate specificity). In this work, we summarized the achievements of electrochemical immunosensors with ALP as the signal reporter. We mainly focused on detection principles and signal amplification strategies and briefly discussed the challenges regarding how to further improve the performance of ALP-based immunoassays.

Ultrasensitive alkaline phosphatase activity assay based on controllable signal probe production coupled with the cathodic photoelectrochemical analysis

A highly sensitive and selective split-type perovskite-based photoelectrochemical (PEC) platform was developed for measuring alkaline phosphatase (ALP) activity in milk and serum samples. ALP in the test sample hydrolyzed 2-phosphate sesquimagnesium salt hydrate (AAPS) in a 96-microwell plate to produce ascorbic acid (AA), a PEC electron donor. The resulting AA, which could preferentially annihilate the photogenerated holes, indirectly reflects ALP activity. The PEC used a cetyltrimethylammonium bromide (CTAB)-functionalized CH₃NH₃PbI₃ (CTAB@CH₃NH₃PbI₃) film as the cathode to monitor the controlled AA production. Due to the excellent photoelectric characteristics of the CH₃NH₃PbI₃ perovskite and the split-type assay, excellent sensitivity and selectivity for ALP detection were obtained. Under the optimum experimental conditions, ALP activity with a limit of detection (LOD) of 2.6 × 10^-4 U/L in a linear dynamic range of 10^-3 ∼ 10² U/L was obtained. With its sensitive, rapid, and high-throughput detection capabilities, this split-type and label-free PEC platform has great potential for use in food and biomedical analysis.

Two-Dimensional Graphitic Carbon Nitride (g-C3N4) Nanosheets and Their Derivatives for Diagnosis and Detection Applications

The early diagnosis of certain fatal diseases is vital for preventing severe consequences and contributes to a more effective treatment. Despite numerous conventional methods to realize this goal, employing nanobiosensors is a novel approach that provides a fast and precise detection. Recently, nanomaterials have been widely applied as biosensors with distinctive features. Graphite phase carbon nitride (g-C3N4) is a two-dimensional (2D) carbon-based nanostructure that has received attention in biosensing. Biocompatibility, biodegradability, semiconductivity, high photoluminescence yield, low-cost synthesis, easy production process, antimicrobial activity, and high stability are prominent properties that have rendered g-C3N4 a promising candidate to be used in electrochemical, optical, and other kinds of biosensors. This review presents the g-C3N4 unique features, synthesis methods, and g-C3N4-based nanomaterials. In addition, recent relevant studies on using g-C3N4 in biosensors in regard to improving treatment pathways are reviewed.

Cu3(PO4)2/BiVO4 photoelectrochemical sensor for sensitive and selective determination of synthetic antioxidant propyl gallate

Propyl gallate (PG) as one of the most important additives has been widely used to prevent or slow the oxidation of foods in the food industry. In this work, Cu₃(PO₄)₂/BiVO₄ composite is synthesized through two hydrothermal processes. With visible light irradiation, the Cu₃(PO₄)₂/BiVO₄ composites modified PEC platform displays a superior anode photocurrent signal. The PEC sensor showed a wide linear range from 1 × 10^-10 to 1 × 10^-3 mol L^-1 with a detection limit as low as 0.05 × 10^-10 mol L^-1. The Cu₃(PO₄)₂/BiVO₄ photoelectrochemical (PEC) sensor is designed and characterized by electrochemical impedance. Compared with GCE/BiVO₄ and GCE/Cu₃(PO₄)₂, the GCE/Cu₃(PO₄)₂/BiVO₄ has a higher photocurrent response. In addition, the sensor is highly selective for samples containing other antioxidants. Furthermore, the sensor can be used to detect PG in edible oil samples with satisfactory results. The recoveries of propyl gallate in edible oil ranged from 95.5 to 101.8%. The results show that Cu₃(PO₄)₂/BiVO₄ composites can be used to analyze PG in different edible oil samples, which are beneficial for food quality monitoring and reduce the risk of PG overuse in food.

A colorimetric and ratiometric photometric sequential assay for ascorbic acid and alkaline phosphatase in serum based on valence states modulation

The photometric method is widely used in real clinical tests due to its simple operation, low cost and convenient. Many of the reported colorimetric ALP assays so far are non- ratiometric because the detection was based on changes in absorbance at a single wavelength. The development of novel colorimetric and ratiometric assay is of importance for quantitatively measuring target with high accuracy. The challenge in the design of ratiometric photometric assay is that the chromophore must have a significant spectral shift before and after binding to the target. Here, we report a colorimetric and ratiometric photometric sequential assay of AA and ALP based on the complexation between ARS and Cu²⁺ and redox reaction between AA and Cu²⁺. The absorption band of ARS centered at 425 nm (yellow color), which could be shifted to 510 nm (red color) upon Cu²⁺ binding. However, as far as we know, this classic color reaction has not been used to develop a ratiometric photometric method to sequentially detect AA and ALP, although photometric methods based on the regulation of other color reagents with oxidizing metal ions have been reported. The proposed sensing system shows a limit of detection for ALP at 0.24 U L^-1 and could be applied for detecting ALP in newborn calf serum. The established sensing system makes a useful contribution to the detection of ALP in complex clinical samples.

ZIF-8@GMP-Tb nanocomplex for ratiometric fluorescent detection of alkaline phosphatase activity

Luminescent metal-organic frameworks (LMOFs) and their functional materials with unique characteristics can provide the basis for the construction of new analytical techniques, which can meet the continuous demand for various fields. In this work, guanosine monophosphate (GMP), terbium ion (Tb³⁺) and zeolitic imidazolate framework-8 (ZIF-8) are self-assembled to form a ZIF-8@GMP-Tb nanocomplex, which can be utilized as a ratiometric fluorescent probe to monitor alkaline phosphatase (ALP) activity. Specifically, with adding ALP, the fluorescence intensity at 547 nm (one of the characteristic emission peaks of Tb³⁺) obviously decreased. Meanwhile, the conjugated structure of GMP increased the fluorescence of ZIF-8 (located at 330 nm). The possible mechanism was proposed through the characterization of the materials. Based on the variation of the emission peaks at 330 and 547 nm, the ratiometric fluorescent sensor of ALP has a linear range of 0.25-20 U/L. Moreover, applying this sensing system to the detection of ALP in the human serum sample and ALP inhibitor investigation possesses satisfactory results. This work provides a new perspective for the utilization of ZIF-8 and lanthanide ions in manufacturing simple and sensitive sensors.

A photoelectrochemical sensor for glutathione based on Bi2S3-modified TiO2 nanotube arrays

A novel photoelectrochemical sensor for the determination of glutathione based on Bi2S3-modified TiO2 nanotube arrays. Under the excitation of visible light, glutathione can be oxidized by the holes created by the Bi2S3/TiO2 NTAs.

Midas Touch: Engineering Activity of Metal-Organic Frameworks via Coordination for Biosensing

The ever-increasing attention on the highly sensitive biosensors pushes people to explore functional nanomaterials for signal amplification. To endow inert metal-organic frameworks (MOFs) with enzyme mimicking activity, a simple strategy of introducing Cu²⁺ via coordination with 2,2'-bipyridine ligands of Zr-MOF, just like "Midas touch," is proposed. More details on the coordination environment of Cu active sites in Zr-MOF-Cu are disclosed via electron paramagnetic resonance and synchrotron-radiation-based X-ray absorption fine structure analyses. The as-prepared Zr-MOF-Cu exhibits unparalleled catalytic ability, which can catalyze ascorbic acid (AA) to dehydroascorbic acid and further stimulate the reaction with o-phenylenediamine to produce fluorescent signal probes with 8-fold signal amplification. On the basis of catalyzing the dephosphorylation process of l-ascorbic acid-2-phosphate to yield AA via alkaline phosphatase (ALP) and AA-dependent signal responses, a universal fluorescent system has been successfully constructed for quantitative measurement of the activity of ALP and the ALP-related enzyme-linked immunosorbent assay with carcinoembryonic antigen as a model. Moreover, the stable loading of Cu active sites endows the sensing platform with anti-inference capacity and enables its reuse without loss of catalytic activity after 6 months.

Visible light-activated self-powered photoelectrochemical aptasensor for ultrasensitive chloramphenicol detection based on DFT-proved Z-scheme Ag2CrO4/g-C3N4/graphene oxide

A visible light self-powered photoelectrochemical (PEC) aptasensor based on silver chromate particles, graphitic carbon nitride nanosheets and graphene oxide sheets (Ag₂CrO₄/g-C₃N₄/GO) for the ultrasensitive detection of chloramphenicol (CAP) was reported in this work. g-C₃N₄ was considered to be the fundamental photoelectric material because of its great oxidation ability of photogenerated hole as well as excellent biocompatibility and low toxicity. However, the narrow light absorption range and rapid carrier recombination rate limit the application of pure g-C₃N₄. Herein, Ag₂CrO₄ and GO as photosensitizer were introduced to improve the photoelectric properties of g-C₃N₄. The photocurrent of the developed ternary composite was about 3 times higher than that of pristine g-C₃N₄, which proves it can be used as a suitable photoelectric active material. Moreover, the mechanism of Z-scheme electron transfer path was proved by density functional theory (DFT) calculation. The fabricated PEC aptasensor exhibited high sensitivity toward CAP with a wide liner response of 0.5 pM to 50 nM and a detection limit of 0.29 pM. The specific recognition mechanism and excellent sensing performance indicated this aptasensor could serve as a useful tool for selective and ultrasensitive CAP detection in practical analysis.

Gold Nanocluster-catalyzed Luminol Chemiluminescent Sensing Method for Sensitive and Selective Detection of Alkaline Phosphatase

A sensitive sensing method was developed for the determination of alkaline phosphatase (ALP) activity based on gold nanocluster (Au NC)-catalyzed luminol-H2O2 chemiluminescent (CL) reaction. The CL signal of luminol-H2O2-Au NCs can be quenched by ascorbic acid, which was the product of magnesium ascorbyl phosphate (MAP) hydrolysis reaction catalyzed by ALP. The proposed sensing platform showed convenient, sensitive and selective detection of ALP in the range of 0.0027 - 1.3890 U L-1, with the detection limit of 0.0026 U L-1. The broad detection linear range and ultra-high sensitivity were inherited from the efficient free radical scavenging capability of ascorbic acid on the luminol-H2O2-Au NCs CL reaction. The CL sensing platform was applied to the detection of ALP activity in serum samples. We believe that this sensing platform is a universal CL strategy for ALP detection because ascorbic acid is an efficient CL quencher for many CL reactions.

Recent progress of heterostructure-based photoelectrodes in photoelectrochemical biosensing: a mini review

The heterostructure photoelectrodes have witted the rapid development to improve the performance of PEC biosensors recently.

Mimicking biological process to detect alkaline phosphatase activity using the vitamin B6 cofactor conjugated bovine serum albumin capped CdS quantum dots

This manuscript presents a novel bioanalytical approach for the selective ratiometric fluorescent sensing of enzymatic activity of the alkaline phosphatase (ALP) in the biological samples. The probe was designed by conjugating the pyridoxal 5'-phosphate (PLP) over the surface of bovine serum albumin (BSA) stabilized CdS quantum dots (QDs) through the interaction of free amine present in BSA with the aldehyde group of PLP. The conjugation of PLP quenched the emission of QDs. Upon addition of the ALP, the emission of QDs was restored due to the dephosphorylation and the conversion of the functionalized PLP in to pyridoxal. With this probe, the ALP activity can be detected down to 0.05 U/L and also successfully applied for the detection of ALP activity in biological samples such as human serum and plasma.

Enhanced photoelectrochemical sensing based on novel synthesized Bi2S3@Bi2O3 nanosheet heterostructure for ultrasensitive determination of L-cysteine

The design of a low-cost and highly efficient photoactive heterojunction material for sensing is still a challenging issue. On the basis of the formation of sheet-like Bi₂O₃ via coating Bi₂S₃, a novel Bi₂O₃@Bi₂S₃ heterostructure is controllably synthesized via a facile water bath approach. The prepared Bi₂O₃@Bi₂S₃ nanosheets show a superior photoelectrochemical (PEC) performance for the detection of L-cysteine (L-Cys), and the photocurrent signal is three and four times higher than those of Bi₂S₃ and Bi₂O₃ under visible irradiation, respectively. Also, the heterostructure presents an outstanding linear range for the detection of L-Cys: 0.1-10,000 μM. In addition, the mechanism of improved PEC response of Bi₂O₃@Bi₂S₃ nanosheets is investigated according to the estimated energy band positions. Thus, the integration of the novel heterostructure and the photoelectrochemical technique demonstrates a rapid photocurrent response, showing a great effect on the performance of the sensing system and a new PEC method for highly selective and sensitive chemical detection. Graphical abstract.

A surface plasmon resonance enhanced photoelectrochemical immunoassay based on perovskite metal oxide@gold nanoparticle heterostructures

A visible light-driven photoelectrochemical immunoassay was designed for PSA detection by using perovskite metal oxide@gold nanoparticle heterostructures.

Unlocking the hidden talent of DNA: Unexpected catalytic activity for colorimetric assay of alkaline phosphatase

Carboxylic acids have been efficiently used to activate H₂O₂ to form even more potent oxidant-peroxy acids through enzyme-catalyzed processes. By employing acetic acid as the activator, herein we report for the first time that cofactor-free DNA displays unexpected activity in H₂O₂-mediated oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) under mild conditions. A series of 10-nt oligonucleotides were rationally designed with various combinations of double nucleotides including TG, AG, CG, TA and AC respectively, which demonstrates that the catalytic performance of DNA is highly dependent upon the sequence composition, strand length and continuous nucleotides. Inspired by phosphate-induced inhibition effects on the formation of peracetic acid, an ultrasensitive assay was well-established for monitoring alkaline phosphatase (ALP) on the basis of double terminal-phosphorylated G-rich oligonucleotides. Phosphorylated DNA not only serves as the substrate for ALP-catalyzed hydrolysis, but also acts as the enzyme-like catalyst for signal amplification. Quantitative determination of ALP is realized in a linear range from 0.05 to 15 mU/mL, resulting in the limit of detection of 0.01 mU/mL. The rapid and reliable test also has great potential in analyzing serum samples for practical disease diagnosis.

Photoelectrochemical biosensor for protein kinase A detection based on carbon microspheres, peptide functionalized Au-ZIF-8 and TiO2/g-C3N4

In this work, a novel and sensitive photoelectrochemical (PEC) strategy was designed for protein kinase A (PKA) detection, comprising carbon microsphere (CMS) modified ITO electrode, TiO₂ as the phosphate group recognition material and graphite-carbon nitride (g-C₃N₄) as photoactive material. For the first time, gold nanoparticle decorated zeolitic imidazolate frameworks (Au-ZIF-8) was employed to fabricate biosensor for PKA activity assay with the function of substrate peptide immobilization and signal amplification. Firstly, substrate peptides were assembled on the Au-ZIF-8/CMS/ITO surface through the covalent bonding between the gold nanoparticles (AuNPs) and sulfydryl groups of the peptides. Then, in the presence of ATP, phosphorylation of the substrate peptide was achieved under PKA catalysis. Finally, TiO₂-g-C₃N₄ composites were further modified on the electrode surface based on bonding between TiO₂ and phosphate groups created via phosphorylation of the peptide (yielding TiO₂-g-C₃N₄/P-peptide/Au-ZIF-8/CMS/ITO), which is different with our previous work by directly immobilizing g-C₃N₄ composite on electrode surface. The developed method showed a wide linear range from 0.05-50 U mL^-1. The detection limit was 0.02 U mL^-1 (S/N = 3). The constructed biosensor exhibited high detection specificity for PKA. In addition, the wide applicability of this biosensor was demonstrated by evaluating the inhibition ability of ellagic acid towards PKA.