Multifunctional monomers based on vinyl sulfonates and vinyl sulfonamides for crosslinking thiol-Michael polymerizations: monomer reactivity and mechanical behavior

Vinyl sulfonyl chemistry-driven unidirectional transport of a macrocycle through a [2]rotaxane

The pH- and chemically-driven unidirectional transport of a macrocycle through a [2]rotaxane based on the vinyl sulfonyl groups is reported.

Hydrolytically Stable Maleimide-End-Functionalized Polymers for Site-Specific Protein Conjugation

Site-specific conjugation to cysteines of proteins often uses ester groups to link maleimide or alkene groups to polymers. However, the ester group is susceptible to hydrolysis, potentially losing the benefits gained through bioconjugation. Here, we present a simple conjugation strategy that utilizes the amide bond stability of traditional 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide/N-hydroxysuccinimide coupling while introducing site specificity. Hydrolytically stable maleimide-end-functionalized polymers for site-specific conjugation to free cysteines of proteins were synthesized using reversible addition-fragmentation chain-transfer (RAFT) polymerization. The alpha terminus of the polymers was amidated with a furan-protected aminoethyl maleimide using carbodiimide-based chemistry. Finally, the maleimide was exposed by a retro Diels-Alder reaction to yield the maleimide group, allowing for thiol-maleimide click chemistry for bioconjugation. A thermophilic cellulase from Fervidobacterium nodosum (FnCel5a) was conjugated using various strategies, including random 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC)/N-hydroxysuccinimide (NHS) coupling, site-specific hydroxyethyl maleimide (HEMI) end-functionalized coupling, hydroxyethyl acrylate (HEA) end-functionalized coupling, and amidoethyl maleimide (AEMI) end-functionalized coupling. Only the polymers conjugated by EDC and AEMI remained conjugated a week after attachment. This indicates that hydrolytically stable amide-based maleimides are an important bioconjugation strategy for conjugates that require long-term stability, while esters are better suited for systems that require debonding of polymers over time.

Determining Michael Acceptor Reactivity from Kinetic, Mechanistic, and Computational Analysis for the Base-catalyzed Thiol-Michael Reaction

A combined experimental and computational study of the reactivities of seven commonly used Michael acceptors paired with two thiols within the framework of photobase-catalyzed thiol-Michael reactions is reported. The rate coefficients of the propagation (kP), reverse propagation (k-P), chain-transfer (kCT), and overall reaction (koverall) were experimentally determined and compared with the well-accepted electrophilicity parameters of Mayr and Parr, and DFT-calculated energetics. Both Mayr's and Parr's electrophilicity parameters predict the reactivities of these structurally varying vinyl functional groups well, covering a range of overall reaction rate coefficients from 0.5 to 6.2 s-1. To gain insight into the individual steps, the relative energies have been calculated using DFT for each of the stationary points along this step-growth reaction between ethanethiol and the seven alkenes. The free energies of the individual steps reveal the underlying factors that control the reaction barriers for propagation and chain transfer. Both the propagation and chain transfer steps are under kinetic control. These results serve as a useful guide for Michael acceptor selection to design and predict thiol-Michael-based materials with appropriate kinetic and material properties.

Heat- and Light-Responsive Materials Through Pairing Dynamic Thiol-Michael and Coumarin Chemistry

Covalent adaptable networks (CANs) based on the thiol-Michael (TM) linkages can be thermal and pH responsive. Here, a new vinyl-sulfone-based thiol-Michael crosslinker is synthesized and incorporated into acrylate-based CANs to achieve stable materials with dynamic properties. Because of the reversible TM linkages, excellent temperature-responsive re-healing and malleability properties are achieved. In addition, for the first time, a photoresponsive coumarin moiety is incorporated with TM-based CANs to introduce light-mediated reconfigureability and postpolymerization crosslinking. Overall, these materials can be on demand dynamic in response to heat and light but can retain mechanical stability at ambient condition.

Photocatalytic decarboxylative amidosulfonation enables direct transformation of carboxylic acids to sulfonamides

Sulfonamides feature prominently in organic synthesis, materials science and medicinal chemistry, where they play important roles as bioisosteric replacements of carboxylic acids and other carbonyls. Yet, a general synthetic platform for the direct conversion of carboxylic acids to a range of functionalized sulfonamides has remained elusive. Herein, we present a visible light-induced, dual catalytic platform that for the first time allows for a one-step access to sulfonamides and sulfonyl azides directly from carboxylic acids. The broad scope of the direct decarboxylative amidosulfonation (DDAS) platform is enabled by the efficient direct conversion of carboxylic acids to sulfinic acids that is catalyzed by acridine photocatalysts and interfaced with copper-catalyzed sulfur-nitrogen bond-forming cross-couplings with both electrophilic and nucleophilic reagents.

Sequence-defined oligoampholytes using hydrolytically stable vinyl sulfonamides: design and UCST behaviour

Water soluble sequence-defined oligoampholytes with precisely positioned charges were synthesised via an iterative solid-phase synthesis protocol using vinyl sulfonamide and acrylate building blocks.

Vinyl sulfonamide based thermosetting composites via thiol-Michael polymerization

OBJECTIVE

To assess the performance of thiol Michael photocurable composites based on ester-free thiols and vinyl sulfonamides of varying monomer structures and varied filler loadings and to contrast the properties of the prototype composites with conventional BisGMA-TEGDMA methacrylate composite.

METHODS

Synthetic divinyl sulfonamides and ester-free tetrafunctional thiol monomers were utilized for thiol-Michael composite development with the incorporation of thiolated microfiller. Polymerization kinetics was investigated using FTIR spectroscopy. Resin viscosities were assessed with rheometry. Water uptake properties were assessed according to standardized methods. Thermomechanical properties were analyzed by dynamic mechanical analysis. Flexural modulus/strength and flexural toughness were measured on a universal testing machine in three-point bending testing mode.

RESULTS

The vinyl sulfonamide-based thiol-Michael resin formulation demonstrated a wide range of viscosities with a significant increase in the functional group conversion when compared to the BisGMA-TEGDMA system. The two different types of vinyl sulfonamide under investigation demonstrated significant differences towards the water sorption. Tertiary vinyl sulfonamide did not undergo visible swelling whereas the secondary vinyl sulfonamide composite swelled extensively in water. With the introduction of rigid monomer into the polymer matrix the glass transition temperature increased and so increased the toughness. Glassy thiol-Michael composites were obtained by ambient curing.

SIGNIFICANCE

Employing the newly developed step-growth thiol-Michael resins in dental composites will provide structural uniformity, improved stability and lower water sorption.

In Situ Cyclization of Proteins (INCYPRO): Cross-Link Derivatization Modulates Protein Stability

Protein macrocyclization represents a very efficient strategy to increase the stability of protein tertiary structures. Here, we describe a panel of novel C3-symmetric tris-electrophilic agents and their use for the cyclization of proteins. These electrophiles are reacted with a protein domain harboring three solvent-exposed cysteine residues, resulting in the in situ cyclization of the protein (INCYPRO). We observe a clear dependency of cross-linking rates on the electrophilicity. All nine obtained cross-linked protein versions show considerably increased thermal stability (up to 29 °C increased melting temperature) when compared to that of the linear precursor. Most interestingly, the degree of stabilization correlates with the hydrophilicity of the cross-link. These results will support the development of novel cross-linked proteins and enable a more rational design process.

[2]Rotaxane End-Capping Synthesis by Click Michael-Type Addition to the Vinyl Sulfonyl Group

We report the application of the click Michael-type addition reaction to vinyl sulfone or vinyl sulfonate groups in the synthesis of rotaxanes through the threading-and-capping method. This methodology has proven to be efficient and versatile as it allowed the preparation of rotaxanes using template approaches based on different noncovalent interactions (i.e., donor-acceptor π-π interactions or hydrogen bonding) in yields of generally 60-80 % and up to 91 % aided by the mild conditions required (room temperature or 0 °C and a mild base such as Et₃ N or 4-(N,N-dimethylamino)pyridine (DMAP)). Furthermore, the use of vinyl sulfonate moieties, which are suitable motifs for coupling-and-decoupling (CAD) chemistry, implies another advantage because it allows the controlled chemical disassembly of the rotaxanes into their components through nucleophilic substitution of the sulfonates resulting from the capping step with a thiol under mild conditions (Cs₂ CO₃ and room temperature).

Vinyl sulfonamide synthesis for irreversible tethering via a novel α-selenoether protection strategy

Vinyl sulfonamides are valuable electrophiles for targeted protein modification and inhibition. We describe a novel approach to the synthesis of terminal vinyl sulfonamides which uses mild oxidative conditions to induce elimination of an α-selenoether masking group. The method complements traditional synthetic approaches and typically yields vinyl sulfonamides in high purity after aqueous work-up without requiring column chromatography of the final electrophilic product. The methodology is applied to the synthesis of covalent fragments for use in irreversible protein tethering and crucially enables the attachment of diverse fragments to the vinyl sulfonamide warhead via a chemical linker. Using thymidylate synthase as a model system, ethylene glycol is identified as an effective linker for irreversible protein tethering.

On-Resin Macrocyclization of Peptides Using Vinyl Sulfonamides as a Thiol-Michael "Click" Acceptor

Macrocyclization of linear peptides imparts improved stability to enzymatic degradation and increases potency of function. Many successful macrocyclization of peptides both in solution and on-resin have been achieved but are limited in scope as they lack selectivity, require long reaction times, or necessitate heat. To overcome these drawbacks a robust and facile strategy was developed employing thiol-Michael click chemistry via an N-methyl vinyl sulfonamide. We demonstrate its balance of reactivity and high stability through FTIR model kinetic studies, reaching 88% conversion over 30 min, and NMR stability studies, revealing no apparent degradation over an 8 day period in basic conditions. Using a commercially available reagent, 2-chloroethane sulfonyl chloride, the cell adhesion peptide, RGDS, was functionalized and macrocyclized on-resin with a relative efficiency of over 95%. The simplistic nature of this process demonstrates the effectiveness of vinyl sulfonamides as a thiol-Michael click acceptor and its applicability to many other bioconjugation applications.