Highly practical and efficient preparation of aldehydes and ketones from aerobic oxidation of alcohols with an inorganic-ligand supported iodine catalyst

Anderson-type polyoxometalates for catalytic applications

Anderson-type polyoxometalates have exhibited remarkable catalytic capabilities in a wide range of reactions. This discourse delves into the distinct categories of Anderson POMs and their respective catalytic reactions, which are examined in separate segments. These encompass the straightforward {XMo6} POMs, the organic grafting {XMo6} POMs, and the integration of POMs into POM cluster organic frameworks. It is important to highlight that specific catalytic functionalities can solely be accomplished via the utilization of Anderson-type POMs, thus emphasizing their indispensable role in future explorations.

Mechanistic insights into aerobic oxidative cleavage of glycol catalyzed by an Anderson-type polyoxometalate [IMo6O24]5

A computational investigation of the aerobic oxidative C-C bond cleavage reaction of glycol catalyzed by an Anderson-type heteropolyanion HPA [IMo₆O₂₄]^5- in the presence of acetonitrile as solvent has been performed at the WB97XD/6-31G(d,p)/lanl2dz level. Two reaction pathways have been identified. The catalytic cycle of each pathway consists of three steps: oxidation cleavage of a glycol molecule by the HPA, oxidation of the HPA by one dioxygen molecule, and, finally, oxidation of a second glycol and regeneration of the catalyst. These reaction pathways have been thoroughly investigated in terms of energetic, natural bond orbital (NBO), natural charges, and geometrical parameters. It is found that (i) even though the top oxygen atoms of the Anderson heteropolyanion are not the most negatively charged ones, they are more likely to react with the diol hydroxyl groups, (ii) a direct relationship between the presence of the iodine ion I(VII) and the studied oxidation reaction could not be identified, and (iii) in terms of energy, the transfer of the two hydrogen atoms is the most energetic step.

Recent Advances of Anderson-Type Polyoxometalates as Catalysts Largely for Oxidative Transformations of Organic Molecules

Anderson-type ([XM₆O₂₄]ⁿ⁻) polyoxometalates (POMs) are a class of polymetallic-oxygen cluster inorganic compounds with special structures and properties. They have been paid extensive attention by researchers now, due to their chemical modification and designability, which have been widely applied in the fields of materials, catalysis and medicine. In contemporary years, the application of Anderson-type POMs in catalytic organic oxidation reaction has gradually shown great significance for the research of green catalytic process. In this paper, we investigate the application of Anderson-type POMs in organic synthesis reaction, and these works are summarized according to the different structure of POMs. This will provide a new strategy for further investigation of the catalytic application of Anderson-type POMs and the study of green catalysis.

Insights into organic-inorganic hybrid molecular materials: organoimido functionalized polyoxomolybdates

Polyoxometalates (POMs) are polyatomic anions that comprise transition metal group 5 (V, Nb, Ta) or group 6 (Mo, W) oxyanions connected together by shared oxygen atoms. POMs are fascinating because of their exclusive and remarkable characteristics. One of the most interesting features of POMs is their capability to function as an electron relay by performing stepwise multi-electron redox reactions while maintaining their structural integrity. Functionalization of POMs with amino organic compounds results in organoimido derivatives of polyoxometalates, which have aroused interest due to augmentation of their properties. Comprehensive study has shown that the synthesis methodologies to obtain desired organoimido derivatives of POMs by employing various imido-releasing reagents have progressed drastically in recent decades, particularly the innovative DCC-dehydrating technique. These organoimido functionalized POMs have been used as major building blocks to develop unique nanostructured organic-inorganic hybrid molecular materials. Many conventional organic synthesis processes such as Pd-catalyzed carbon-carbon coupling and esterification reactions have been performed with organoimido functionalized POMs where the presence of POM triggered the reaction process. Thus, investigation of the reactivity of organoimido derivatives of POMs foreshadows the intriguing future of POMs chemistry.

Recyclable Hypervalent Iodine Reagents in Modern Organic Synthesis

Hypervalent iodine (HVI) reagents have gained much attention as versatile oxidants because of their low toxicity, mild reactivity, easy handling, and availability. Despite their unique reactivity and other advantageous properties, stoichiometric HVI reagents are associated with the disadvantage of generating non-recyclable iodoarenes as waste/co-products. To overcome these drawbacks, the syntheses and utilization of various recyclable hypervalent iodine reagents have been established in recent years. This review summarizes the development of various recyclable non-polymeric, polymer-supported, ionic-liquid-supported, and metal–organic framework (MOF)-hybridized HVI reagents.

1 Introduction

2 Polymer-Supported Hypervalent Iodine Reagents

2.1 Polymer-Supported Hypervalent Iodine(III) Reagents

2.2 Polymer-Supported Hypervalent Iodine(V) Reagents

3 Non-Polymeric Recyclable Hypervalent Iodine Reagents

3.1 Non-Polymeric Recyclable Hypervalent Iodine(III) Reagents

3.2 Recyclable Non-Polymeric Hypervalent Iodine(V) Reagents

3.3 Fluorous Hypervalent Iodine Reagents

4 Ionic-Liquid/Ion-Supported Hypervalent Iodine Reagents

5 Metal–Organic Framework (MOF)-Hybridized Hypervalent Iodine Reagents

6 Conclusion

Atom-economic amide synthesis by using an iron-substituted polyoxometalate catalyst

We report an efficient and economical amidation strategy by using a polyoxometalate-based iron catalyst that affords the corresponding amide products in good yields. All of the aliphatic, aromatic and heterocyclic substrates are produced in high yields without additional base or organic ligands. Most importantly, the first example of heterogeneous iron(III)-catalyzed formation of the diamides is developed.

Highly efficient synthesis of diselenides and ditellurides catalyzed by polyoxomolybdate-based copper

A polyoxomolybdate-based copper-catalyzed synthesis of diselenides and ditellurides from organic iodides and elemental selenium or tellurium in moderate to excellent yields is developed.

Porphyrins and Polyoxometalate Scaffolds

Polyoxometalates (POMs) can act as unique reservoirs for multiple electron transfers. As POMs display only weak absorption in the visible spectrum, they can be associated with chromophores such as porphyrins and porphyrin antennae. In this Minireview, the research dedicated to the combination of porphyrins and polyoxometalates is put in context and the state of the art identifying the challenges addressed in the optimization of hybrid materials for applications is detailed.

Selective oxidation of alcohol-d 1 to aldehyde-d 1 using MnO2

The selective oxidation of alcohol-d₁ to prepare aldehyde-d₁ was newly developed by means of NaBD₄ reduction/activated MnO₂ oxidation. Various aldehyde-d₁ derivatives including aromatic and unsaturated aldehyde-d₁ can be prepared with a high deuterium incorporation ratio (up to 98% D). Halogens (chloride, bromide, and iodide), alkene, alkyne, ester, nitro, and cyano groups in the substrates are tolerated under the mild conditions.

A facile method for deutrium incorporation into aldehydes by mild reduction of NaBD₄ of aldehydes and MnO₂ oxidation (98% D) is disclosed.

An efficient chromium(III)-catalyzed aerobic oxidation of methylarenes in water for the green preparation of corresponding acids

A highly efficient method to oxidize methylarenes to their corresponding acids with a reusable Cr catalyst was developed. The reaction can be carried out in water with 1 atm oxygen and K2S2O8 as cooxidants, proceeds under green and mild conditions, and is suitable for the oxidation of both electron-deficient and electron-rich methylarenes, including heteroaryl methylarenes, even at the gram level. The excellent result, together with its simplicity of operation and the ability to continuously reuse the catalyst, makes this new methodology environmentally benign and cost-effective. The generality of this methodology gives it the potential for use on an industrial scale. Differing from the accepted oxidation mechanism of toluene, GC-MS studies and DFT calculations have revealed that the key benzyl alcohol intermediate is formed under the synergetic effect of the chromium and molybdenum in the Cr catalyst, which can be further oxidized to afford benzaldehyde and finally benzoic acid.

Oxidative dehydrogenation of hydrazines and diarylamines using a polyoxomolybdate-based iron catalyst

We report an efficient method for the oxidative dehydrogenation of hydrazines and diarylamines in aqueous ethanol using Anderson-type polyoxomolybdate-based iron(iii) as a catalyst and hydrogen peroxide as an oxidant. A series of azo compounds and tetraarylhydrazines were obtained in moderate to excellent yields. The reaction conditions and substrate scopes are complementary or superior to those of more established protocols. In addition, the catalyst shows good stability and reusability in water. The preliminary mechanistic studies suggest that a radical process is involved in the reaction.

Anderson-type polyoxometalates: from structures to functions

Anderson-type polyoxometalates (POMs) are one of the most important groups of the POM family. In the past decade, the functionalization of Anderson-type POMs has achieved significant progress and these materials have already shown unique charm in catalysis, molecular devices, energy materials, and inorganic biochemical drugs. In particular, their highly flexible topological structure and diverse functionalization methods make them the most convenient and universal platforms for rational design and controllable synthesis. This review provides a deep discussion on the recent progress in the synthetic methodology, structural exploration, and promising applications of Anderson-type POMs. It also summarizes the latest research directions and provides future prospects.

Microwave-Assisted Synthesis of Tris-Anderson Polyoxometalates for Facile CO2 Cycloaddition

Four new tris-Anderson polyoxometalates (POMs), (NH₄)₄[ZnMo₆O₁₈(C₄H₈NO₃)(OH)₃]·4H₂O (1), (NH₄)₄[CuMo₆O₁₈(C₄H₈NO₃)(OH)₃]·4H₂O (2), (TBA)₃(NH₄)[ZnMo₆O₁₇(C₅H₉O₃)₂(OH)]·10H₂O (3) (TBA = n-C₁₆H₃₆N), and (NH₄)₄[CuMo₆O₁₈(C₅H₉O₃)₂]·16H₂O (4), were synthesized by a microwave-assisted method. Single-crystal X-ray diffraction revealed that 1 and 2 contained a tris (trihydroxyl organic compounds) ligand grafted on one side, while two tris ligands were grafted on two sides to form χ/δ and δ/δ isomers in 3 and 4, respectively. ¹H and ¹³C NMR spectra of the χ/δ isomer 3 were obtained for the first time, with six methylenes showing six peaks in the ¹H NMR spectrum and only four peaks in the ¹³C NMR spectrum. Mass spectrometry monitoring revealed that during the microwave-assistant process the tris ligand can graft onto POMs to form 1, while tris directly coordinates with metallic heteroatoms to form isopolymolybdates during the conventional reflux synthesis process. In addition, 1-4 can catalyze CO₂ with epoxides into cyclic carbonates with high selectivity and yields at an atmospheric pressure of CO₂, which is lower than the pressure of CO₂ in other catalysis using POMs as catalysts. Furthermore, 1-4 showed good catalytic stability and cycling properties. Mechanism studies substantiated POMs cocatalyzed with Br^- to improve the catalytic yields.

A micro-environment tuning approach for enhancing the catalytic capabilities of lanthanide containing polyoxometalate in the cyanosilylation of ketones

The as-synthesized (TBA)8H5[Nd(SiW11O39)2] manifested high catalytic activity for cyanosilylation of ketones, and its catalytic activity could be improved further through rational design of the reaction micro-environment beyond the molecular level, and the corresponding mechanism has been systematically studied.

Additive-Mediated Selective Oxidation of Alcohols to Esters via Synergistic Effect Using Single Cation Cobalt Catalyst Stabilized with Inorganic Ligand

The direct catalytic oxidation of alcohols to esters is very appealing, but the economical-friendly catalysis systems are not yet well established. Herein, we show that a pure inorganic ligand-supported single-atomic cobalt compound, (NH₄)₃[CoMo₆O₁₈(OH)₆] (simplified as CoMo₆), could be used as a heterogeneous catalyst and effectively promote this type of reaction in the presence of 30% H₂O₂ using KCl as an additive. The oxidative cross-esterification of various alcohols (aromatic and aliphatic) could be achieved under mild conditions in nearly all cases, affording the corresponding esters in high yields, including several drug molecules and natural products. Detailed studies have revealed that chloride ion is able to bind to the CoMo₆ to form a supramolecular dimer 2(CoMo₆∙Cl), which can effectively catalyze the reaction via a synergistic effect from chloride ion and CoMo₆. Mechanism studies and control reactions demonstrate that the esterification proceeds via the key oxidative immediate of aldehydes.

Pt-Substituted polyoxometalate modification on the surface of low-cost TiO2 with highly efficient H2 evolution performance

In this study, Pt-substituted polyoxometalate was first modified on the surface of commercially available TiO₂, forming an efficient photocatalyst with high reactivity for hydrogen evolution. During the photocatalytic process, Pt-polyoxometalates not only increase the mobility rate of electrons but also improve the separation efficiency of photoinduced electrons and holes. After photoreduction, the in situ generated Pt⁰ species are anchored on the surface of polyoxometalate anion, which prevents further agglomeration. Then, the in situ formed Pt⁰ species and polyoxometalates synergistically promote the efficiency of photoinduced electron transfer from TiO₂ to the protons adsorbed on the Pt⁰ surface. Although the content of Pt⁰ in the nanocomposite is only 0.6%, the photocatalytic hydrogen production rate reaches 5.6 mmol g^-1 h^-1 and remains stable at 4.5 mmol g^-1 h^-1 after the continuous catalytic process. Due to the modification of TiO₂ by Pt-substituted polyoxometalate, this nanocomposite represents a practical model that possesses highly efficient photoelectric conversion performance. The presented work not only extends the family of new TiO₂-polyoxometalate-based materials but also takes a further step toward the practical application of commercial TiO₂ in photocatalytic hydrogen production.

Organochalcogen ligands in catalysis of oxidation of alcohols and transfer hydrogenation

Organochalcogen compounds have been used as the building blocks for the development of a variety of catalysts that have been studied comprehensively during the last two decades for several chemical transformations. Transfer hydrogenation (reduction of carbonyl compounds to alcohols) and oxidation of alcohols (conversion of alcohols to their respective ketones and aldehydes) are also among such chemical transformations. Some compilations are available in the literature on the development of catalysts, based on organochalcogen ligands, and their applications in Heck reaction, Suzuki reaction, and other related aspects. Some review articles have also been published on different aspects of oxidation of alcohols and transfer hydrogenation. However, no such article is available in the literature on the syntheses and use of organochalcogen ligated catalysts for these two reactions. In this perspective, a survey of developments pertaining to the synthetic aspects of such organochalcogen (S/Se/Te) based catalysts for the two reactions has been made. In addition to covering the syntheses of chalcogen ligands, their metal complexes and nanoparticles (NPs), emphasis has also been placed on the efficient conversion of different substrates during catalytic reactions, diversity in catalytic potential and mechanistic aspects of catalysis. It also includes the analysis of comparison (in terms of efficiency) between this unique class of catalysts and efficient catalysts without a chalcogen donor. The future scope of this area has also been highlighted.

Two organic–inorganic hybrid polyoxotungstogermanates containing organic ligand chelated Fe–Dy heterometallic clusters and frequency dependent magnetic properties

Two organic–inorganic hybrid polyoxotungstogermanates are constructed from organic ligand chelated Fe–Dy heterometallic clusters and [B-α-GeW₉O₃₄]¹⁰⁻ units with frequency dependent magnetic properties.

Discovery of a New Family of Polyoxometalate-Based Hybrids with Improved Catalytic Performances for Selective Sulfoxidation: The Synergy between Classic Heptamolybdate Anions and Complex Cations

A series of functional cation-regulated isopolymolybdate-based organic-inorganic hybrid compounds, Na₂H₂[Mo₄O₁₂(C₈H₁₇O₅N)₂]·10H₂O (1), Na₂[M(Bis-tris)(H₂O)]₂[Mo₇O₂₄]·10H₂O [M = Cu, 2; Ni, 3; Co, 4; Zn, 5; Bis-tris = 2,2-Bis(hydroxymethyl)-2,2',2″-nitrilotriethanol], and (NH₄)₂[M(Bis-tris)(H₂O)]₂[Mo₇O₂₄]·6H₂O (M = Zn, 6; Cu, 7), were synthesized and characterized toward advanced molecular catalyst design. Compound 1 is a covalently bonded adduct, and its self-assembly process can be probed by electrospray ionization mass spectrometry (ESI-MS). Compounds 2-7 are polyoxometalate (POM)-based hybrids containing classic heptamolybdate anions and complex cations with Bis-tris ligands. All of these compounds showed remarkable catalytic effects for selective sulfide oxidation. To the best of our knowledge, compound 5 presents the best catalytic activity so far among the reported hybrid materials with common easily synthesized small-molecule POM clusters and also exhibits outstanding reliability. The conclusion of the catalytic effect is drawn from the results that Zn-based compounds have better catalytic effects than other transition-metal-containing compounds and the compound constructed by Na⁺ has higher catalytic activity than that constructed by NH₄⁺. The mechanism studies show that the improvements of the catalytic performance are caused by the synergy between classic heptamolybdate anions and complex cations. ESI-MS data and UV-vis spectra revealed that the POM anions can form intermediate peroxomolybdenum units during catalytic reaction. Further, the combination of the substrate thioanisole with complex cations was characterized by NMR experiments and UV-vis spectra. Thus, a new synergistic mechanism of anions and cations is proposed in which the activated thioanisole is used as a nucleophile to attack the peroxomolybdenum bonds, and this provides a new strategy in the design of reliable POM-based catalysts.

Total Synthesis of Marine Natural Products Serinolamide A and Columbamide D

In this report, an expeditious synthesis of two new biologically active marine natural products serinolamide A and columbamide D is documented. This convergent approach involves the key steps such as hydrolytic kinetic resolution, cross metathesis, Grignard reaction, Johnson-Claisen rearrangement, Mitsunobu, and so forth. Both of the target molecules were obtained from a common precursor (R)-7 with high enantioselectivity, less synthetic steps, and in good overall yields (serinolamide A 66% and columbamide D 62%).

Iron-catalyzed oxidative functionalization of C(sp3)–H bonds under bromide-synergized mild conditions

A bromide-synergized iron catalysis which can effectively catalyze the oxidative functionalization of various C–H bonds with high yield and good selectivity.