Enhancing the Photoluminescence and Electroluminescence of Graphitic Carbon Nitride via Atomic and Molecular Co-modification

Graphitic carbon nitride (g-CN) materials exhibit attractive optoelectronic physical properties; however, their low photoluminescence quantum yields (PLQYs) limit their applications in luminescent devices. Here, boron-doped aromatic carbon nitride (B-PhCNx) was synthesized for the first time via direct thermal polymerization of 2,4-diamino-6-phenyl-1,3,5-triazine and boric acid. The impact of B doping and phenyl modifying on the structural and optical characteristics of the samples was investigated in detail. The highest PLQY of 40.7% was achieved in B-PhCN20, which is 6.8 times that of pristine carbon nitride (p-CN). The B-PhCN20-based light-emitting diode demonstrates a maximum luminance of 1494 cd m-2 and a maximum external quantum efficiency of 1.03%, which are 3.5 and 4.9 times that of the p-CN-based device, respectively. Our findings will provide a reference for rationally designing low-cost and high-performance carbon-nitride-based optoelectronic devices.

Z-scheme WOx/Cu-g-C3N4 heterojunction nanoarchitectonics with promoted charge separation and transfer towards efficient full solar-spectrum photocatalysis

Construction of Z-scheme heterojunctions has been considered one superb method in promoting solar-assisted charge carrier separation of carbon-based materials to achieve efficient utilization of solar energy in hydrogen production and CO₂ reduction. One interesting concept in nanofabrication that has become trend recent years is nanoarchitectonics. A heterostructure photocatalyst constructed based on the idea of nanoarchitectonics using the combination of g-C₃N₄, metal and an additional semiconducting nanocomposite is investigated in this paper. Z-scheme tungsten oxide incorporated copper modified graphitic carbon nitride (WO_x/Cu-g-C₃N₄) heterostructures are fabricated via immobilization of WO_x on Cu nanoparticles modified superior thin g-C₃N₄ nanosheets. Mechano-chemical pre-reaction and a two-step high-temperature thermal polymerization process are the keys in attaining homogeneous distribution of Cu nanoparticles in g-C₃N₄ nanosheets. The horizontal growth of homogeneously distributed WO_x nanobelts on Cu modified g-C₃N₄ (Cu-g-C₃N₄) base via solvothermal synthesis is achieved. The photocatalytic performances of the heterostructures are evaluated through water splitting and CO₂ photoreduction measurements in full solar spectrum irradiation condition. The presence of Cu nanoparticles in the composite system improves charge transport between g-C₃N₄ and WO_x and thus enhances the photocatalytic performances (H₂ generation and CO₂ photoreduction) of the composite material, while the presence of WO_x nanocomposites enhances light absorption of the composite material in the near infrared range. The synthesized heterostructure with optimized WO_x to Cu-g-C₃N₄ ratio and in case of no co-catalyst addition exhibits enhanced photocatalytic H₂ evolution (4560 μmolg^-1h^-1) as well as excellent CO₂ reduction rate (5.89 μmolg^-1h^-1 for CO generation).

Highly fluorescent g-C3N4 nanobelts derived from bulk g-C3N4 for NO2 gas sensing

The fluorescent emission wavelengths of nanostructures derived from bulk graphitic carbon nitride were commonly lower than those of their bulk due to the quantum confinement effect, which are disadvantageous for bioimaging and sensing applications. Herein, a new strategy to engineer graphitic carbon nitride nanomaterials with tunable fluorescent wavelength and intensity was proposed via thermal treatment of bulk graphitic carbon nitride at high temperature and then hydrolysis in alkali solution. Highly fluorescent g-C₃N₄ nanobelts with emission peak at 494 nm, 19 nm higher than that of bulk graphitic carbon nitride and 23.6% quantum yield were successfully obtained by controlling the heating temperature at 750 °C for 2 h and the hydrolysis in 4 mol L^-1 NaOH solution for 8 h. Finally, a home-made portable gas sensor for reversibly sensing of toxic NO₂ gas at room temperature was designed by utilizing graphitic carbon nitride nanobelts as the fluorescent nanoprobe, which can overcome the disadvantages of high operation temperature or the interference of humidity resulting from the common chemiresistive sensors.

Pt nanoparticles embedded spine-like g-C3N4 nanostructures with superior photocatalytic activity for H2 generation and CO2 reduction

Conventional two-dimensional (2D) graphitic carbon nitride, 2D g-C₃N₄ with its layered structures and flat and smooth 2D surface possesses certain disadvantages that is affecting their photocatalytic performances. In this paper, new nanostructured spine-like three-dimensional (3D) g-C₃N₄ nanostructures are created for the first time via a new three-step synthesis method. In this method, self-assembly of layered precursors and H⁺ intercalation introduced by acid treatment play an important role for the unique nanostructure formation of 3D g-C₃N₄ nanostructures. The spine-like 3D g-C₃N₄ nanostructures show a superior photocatalytic performance for H₂ generation, achieving 4500 μmol·g^-1·h^-1, 8.2 times higher than that on conventional 2D g-C₃N₄. Remarkably spine-like 3D g-C₃N₄ nanostructures demonstrate a clear photocatalytic activity toward CO₂ reduction to CH₄ (0.71 μmol·g^-1·h^-1) in contrast to the negligible photocatalytic performance of conventional 2D g-C₃N₄ for the reaction. Adding Pt clusters as co-catalysts substantially enhance the CH₄ generation rate of the 3D g-C₃N₄ nanostructures by 4 times (2.7 μmol·g^-1·h^-1). Spine-like 3D g-C₃N₄ caged nanostructure leads to the significantly increased active sites and negatively shifted conduction band position in comparison with conventional 2D g-C₃N₄, favorable for the photocatalytic reduction reaction. This study demonstrates a new platform for the development of efficient photocatalysts based on nanostructured 3D g-C₃N₄ for H₂ generation and conversion of CO₂ to useful fuels such as CH₄.

The edge-epitaxial growth of yellow g-C3N4 on red g-C3N4 nanosheets with superior photocatalytic activities

g-C₃N₄ has been used as a photocatalyst to overcome the issues of environmental crises and energy shortages. Here, red g-C₃N₄ nanosheets (E_g: ∼ 1.89 eV) were used as seeds for the edge-epitaxial growth of yellow g-C₃N₄ (E_g: ∼ 2.59 eV) to form type II heterostructures. The heterostructures revealed superior photocatalytic activity for enhanced H₂ (3996 μmol g^-1 h^-1), CO (3.8 μmol g^-1 h^-1), and CH₄ (1.8 μmol g^-1 h^-1) evolution.

Biuret-A Crucial Reaction Intermediate for Understanding Urea Pyrolysis To Form Carbon Nitrides: Crystal-Structure Elucidation and In Situ Diffractometric, Vibrational and Thermal Characterisation

The crystal structure of biuret was elucidated by means of XRD analysis of single crystals grown through slow evaporation from a solution in ethanol. It crystallises in its own structure type in space group C2/c (a=15.4135(8) Å, b=6.6042(3) Å, c=9.3055(4) Å, Z=8). Biuret decomposition was studied in situ by means of temperature-programmed powder XRD and FTIR spectroscopy, to identify a co-crystalline biuret-cyanuric acid phase as a previously unrecognised reaction intermediate. Extensive thermogravimetric studies of varying crucible geometry, heating rate and initial sample mass reveal that the concentration of reactive gases at the interface to the condensed sample residues is a crucial parameter for the prevailing decomposition pathway. Taking these findings into consideration, a study on the optimisation of carbon nitride synthesis from urea on the gram scale, with standard solid-state laboratory techniques, is presented. Finally, a serendipitously encountered self-coating of the crucible inner walls by graphite during repeated synthetic cycles, which prove to be highly beneficial for the obtained yields, is reported.

Fusiform-Shaped g-C3 N4 Capsules with Superior Photocatalytic Activity

Carbon nitride (g-C₃ N₄ ) nanostructure rebuilding is an effective means to modify its photocatalytic properties, especially the hollow micron-nanostructure. The increased scattering in the body effectively improves the light utilization efficiency and improves catalytic properties. In this work, fusiform-shaped g-C₃ N₄ capsules are created by controlling the nucleation kinetics of supramolecular assemblies. The fusiform-shaped capsule micron-nanostructure is synthesized with ultrathin wall thickness and adjusted carbon/nitride ratios which decrease the recombination rate of photo-generated carriers. The hollow nanostructure and relatively higher specific surface area of the fusiform-shaped capsule effectively enhance light scattering inside body and lead to an enhanced carrier utilization efficiency. Moreover, the decrease of bandgap and relatively negative conduction band position affect the response of hollow fusiform-shaped g-C₃ N₄ capsules (Hf-g-C₃ N₄ ) in visible light region and improve the photo-reducing performance. In term of H₂ evolution property, Hf-g-C₃ N₄ has been improved to 7052 µmol g^-1 h^-1 , which is 10.9 times higher compared with bulk structure. More importantly, Hf-g-C₃ N₄ can produce CH₄ at the rate of 1.63 µmol g^-1 h^-1 without help of co-catalyst and hole sacrificial agent in the photocatalytic reduction reaction of CO₂ to CH₄ . At same time, the selective photocatalytic reduction of CO₂ is another advantage of Hf-g-C₃ N₄ .

Facile assembly of a graphitic carbon nitride film at an air/water interface for photoelectrochemical NADH regeneration

A graphitic carbon nitride film electrode could be assembled at an air/water interface from nanosheets which exhibits improved photoelectrochemical coenzyme regeneration by further coupling with graphene during the interfacial self-assembly.

Ultra-high quantum yield ultraviolet fluorescence of graphitic carbon nitride nanosheets

Graphitic carbon nitride (g-CN) nanosheets (CNNs) with an ultra-high quantum yield (80.1%) ultraviolet fluorescence (FL) were prepared. The effects of the lateral size and the polymerization temperature on the optical properties of CNNs have been studied. The ultraviolet FL was proved to have originated from the isolated melem units according to the density functional theory calculation and mass spectra. The obtained CNNs are further used as a pH probe due to the dependence of the FL signal on the pH of the solution.

Metalated carbon nitrides as base catalysts for efficient catalytic hydrolysis of carbonyl sulfide

A new type of base catalyst was designed and prepared by metalation of carbon nitrides with alkali metal ions. The as-prepared metalated carbon nitride composites showed enhanced basicity and efficient catalytic hydrolysis of carbonyl sulfide. The results of this study demonstrate that the metalation of carbon nitrides holds great promise for base catalysis applications.

One-step synthesis of novel phosphorus nitride dots for two-photon imaging in living cells

Novel phosphorus nitride dots mainly consisting of N and P with strong fluorescence, excellent dispersibility and outstanding biocompatibility were prepared via a solvothermal method. The phosphorus nitride dots demonstrated great two-photon imaging capability in living cells under 800 nm excitation.

Construction of 2D g-C3N4 lateral-like homostructures and their photo- and electro-catalytic activities

New g-C₃N₄ crystalline/amorphous lateral-like homostructures show excellent photocatalytic activity due to the effective separation of photogenerated carriers.