A two carbon homologation of Friedel-Crafts alkylation enabled by photochemical alkene stitching: modular assembly of cyclolignans

Herein we report an efficient two-carbon homologated variant of Friedel-Crafts alkylation via photochemical radical alkene stitching. Readily available feedstock alkenes are used as bridges between photogenerated alkyl radicals and arenes, opening a route to γ-aryl-carbonyls for chemo-divergent access to aryltetralone and γ-lactones, a gateway to 2,7'-cyclolignans.

Carboazidation of Terminal Alkenes with Trimethylsilyl Azide and Cyclic Ethers Catalyzed by Copper Powder under Oxidative Conditions

Copper-catalyzed carboazidation of alkenes with trimethylsilyl azide and cyclic ethers has been achieved. The employment of naturally abundant copper catalysts allowed cyclic ethers to be used as alkylating reagents under oxidative conditions. The use of styrene derivatives and 1,1-diaryl alkenes afforded carboazidation products. In addition, application of five- and six-membered cyclic ethers to the present reaction gave target organic molecules bearing azide and cyclic ether groups with perfect regioselectivity. Radical trapping and clock experiments revealed that the present reaction proceeded via the radical pathway. To further demonstrate the utility of this carboazidation reaction, transformations from the azide group to the related nitrogen-containing compounds were also performed.

Current Progress, Challenges and Perspectives in the Microalgal-Bacterial Aerobic Granular Sludge Process: A Review

Traditional wastewater treatment technologies have become increasingly inefficient to meet the needs of low-consumption and sustainable wastewater treatment. Researchers are committed to seeking new wastewater treatment technologies, to reduce the pressure on the environment caused by resource shortages. Recently, a microalgal-bacterial granular sludge (MBGS) technology has attracted widespread attention due to its high efficiency wastewater treatment capacity, low energy consumption, low CO₂ emissions, potentially high added values, and resource recovery capabilities. This review focused primarily on the following aspects of microalgal-bacterial granular sludge technology: (1) MBGS culture and maintenance operating parameters, (2) MBGS application in different wastewaters, (3) MBGS additional products: biofuels and bioproducts, (4) MBGS energy saving and consumption reduction: greenhouse gas emission reduction, and (5) challenges and prospects. The information in this review will help us better understand the current progress and future direction of the MBGS technology development. It is expected that this review will provide a sound theoretical basis for the practical applications of a MBGS technology in environmentally sustainable wastewater treatment, resource recovery, and system optimization.

Application for Ecological Restoration of Contaminated Soil: Phytoremediation

Nowadays, with the rapid development of industry and agriculture, heavy metal pollution is becoming more and more serious, mainly deriving from natural and man-made sources [...].

Metronidazole Degradation by UV and UV/H2O2 Advanced Oxidation Processes: Kinetics, Mechanisms, and Effects of Natural Water Matrices

Advanced oxidation technology represented by hydroxyl radicals has great potential to remove residual antibiotics. In this study, we systematically compared the metronidazole (MTZ) degradation behavior and mechanism in the UV and UV/H₂O₂ systems at pH 3.00 condition. The results show that the initial reaction rates were 0.147 and 1.47 µM min^-1 in the UV and UV/H₂O₂ systems, respectively. The main reason for the slow direct photolysis of MTZ is the relatively low molar absorption coefficient (2645.44 M^-1 cm^-1) and quantum yield (5.9 × 10^-3 mol Einstein^-1). Then, we measured kMTZ,OH • as 2.79 (±0.12) × 10⁹ M^-1 s^-1 by competitive kinetics, and calculated kMTZ,OH • and [OH •]SS as 2.43 (±0.11) × 10⁹ M^-1 s^-1 and 2.36 × 10^-13 M by establishing a kinetic model based on the steady-state hypothesis in our UV/H₂O₂ system. The contribution of direct photolysis and ^•OH to the MTZ degradation was 9.9% and 90.1%. ^•OH plays a major role in the MTZ degradation, and ^•OH was the main active material in the UV/H₂O₂ system. This result was also confirmed by MTZ degradation and radicals' identification experiments. MTZ degradation increases with H₂O₂ dosage, but excessive H₂O₂ had the opposite effect. A complex matrix has influence on MTZ degradation. Organic matter could inhibit the degradation of MTZ, and the quenching of the radical was the main reason. NO3- promoted the MTZ degradation, while SO42- and Cl^- had no effect. These results are of fundamental and practical importance in understanding the MTZ degradation, and to help select preferred processes for the optimal removal of antibiotics in natural water bodies, such as rivers, lakes, and groundwater.

Ni-Catalyzed Regio- and Stereoselective Alkylarylation of Unactivated Alkenes in γ,δ-Alkenylketimines

We disclose a Ni-catalyzed vicinal alkylarylation of unactivated alkenes in γ,δ-alkenylketimines with aryl halides and alkylzinc reagents. The reaction produces γ-C(sp3)-branched δ-arylketones with the construction of two new C(sp3)-C(sp3) and C(sp3)-C(sp2) bonds. Electron-deficient alkenes play crucial dual roles as ligands to stabilize reaction intermediates and to increase catalytic rates for the formation of C(sp3)-C(sp3) bonds. This alkene alkylarylation reaction is also effective for secondary alkylzinc reagents and internal alkenes, and proceeds with a complete regio- and stereocontrol, affording products with up to three contiguous all-carbon all-cis secondary stereocenters.

The synthesis of anticancer sulfonated indolo[2,1-a]isoquinoline and benzimidazo[2,1-a]isoquinolin-6(5H)-ones derivatives via a free radical cascade pathway

A facile CuBr₂ induced radical relay addition/cyclization of activated alkenes with substituted-thiosulfonates has been achieved, leading to a broad range of sulfonated indolo[2,1-a]isoquinolines and benzimidazo[2,1-a]isoquinolin-6(5H)-ones in moderate to good yields. In particular, some compounds exhibit bioactivity against cancer cell lines. This protocol shows advantages of low-cost, base-free, simple operation, and broad functional group tolerance.

Fe-Catalyzed Dicarbofunctionalization of Vinylarenes with Alkylsilyl Peroxides and β-Keto Carbonyl Substrates

The formation of two carbon-carbon bonds using vinylarenes with alkylsilyl peroxides and β-keto carbonyl substrates is effected by the presence of catalytic Fe(OTf)₂ under mild reaction conditions. A variety of vinylarenes with different substituents can be utilized in combination with several different alkylsilyl peroxides and β-keto carbonyl substrates.

Construction of Fluorinated Amino Acid Derivatives via Cobalt-Catalyzed Oxidative Difunctionalization of Cyclic Ethers

Via difunctionalization of the α- and β-sites of cyclic ethers, we herein demonstrate a new synthetic method for the efficient construction of novel fluorinated γ-amino acid esters by employing a CoBr₂/m-CPBA catalyst system. Several cyclic ethers were transformed in combination with a vast range of amines and ethyl trifluoropyruvate into the desired products under mild conditions, making this method a practical platform to enrich the library of fluorinated amino acid derivatives from cost-effective and readily available feedstocks.

Efficient copper(i)-catalyzed oxidative intermolecular 1,2-estersulfenylation of styrenes with peroxyesters and disulfides

A simple and practical method for the synthesis of thio-substituted esters through copper(i)-catalyzed intermolecular 1,2-estersulfenylation of styrenes with peroxyesters and disulfides was developed. In this transformation, two new C-S bond and C-O bond were constructed simultaneously under a copper catalyst system, and the transformation exhibits a broad substrate scope and good functional group compatibility. In addition, this method can also be applied to arylthiols. It should be noted that peroxyesters not only acted as nucleophilic reagents but also as oxidants.

Ni-Catalyzed Regioselective 1,2-Dialkylation of Alkenes Enabled by the Formation of Two C(sp3)-C(sp3) Bonds

We disclose a Ni-catalyzed vicinal difunctionalization of alkenes with benzyl halides and alkylzinc reagents, which produces products with two new alkyl-alkyl bonds. This alkene dialkylation is effective in combining secondary benzyl halides and secondary alkylzinc reagents with internal alkenes, which furnishes products with three contiguous all-carbon secondary stereocenters. The products can be readily elaborated to access complex tetralene, benzosuberene, and bicyclodecene cores. The reaction also features as the most efficient alkene difunctionalization process to date with catalyst loadings down to 500 ppm and the catalytic turnover number (TON) and turnover frequency (TOF) registering up to 2 × 103 and 165 h-1 at rt, respectively.

Copper-promoted cyanoalkylation/ring-expansion of vinylcyclopropanes with α-C-H bonds in alkylnitriles toward 3,4-dihydronaphthalenes

A copper-promoted oxidative cyanomethylation/ring-expansion of vinylcyclopropanes with α-C(sp3)-H bonds in alkyl nitriles is established for the generation of 1-cyanoethylated 3,4-dihydronaphthalenes. This cyanomethylation/ring-expansion involves a radical pathway and proceeds via cyanomethyl radical formation, radical addition and ring-expansion. This ring-expansion strategy offers a highly atom-economical route for the construction of nitrile-containing 3,4-dihydronaphthalenes, which can be transformed into other useful products under simple conditions.

Recent Advances on Copper-Catalyzed C–C Bond Formation via C–H Functionalization

Reactions that form C–C bonds are at the heart of many important transformations, both in industry and in academia. From the myriad of catalytic approaches to achieve such transformations, those relying on C–H functionalization are gaining increasing interest due to their inherent sustainable nature. In this short review, we showcase the most recent advances in the field of C–C bond formation via C–H functionalization, but focusing only on those methodologies relying on copper catalysts. This coinage metal has gained increased popularity in recent years, not only because it is cheaper and more abundant than precious metals, but also thanks to its rich and versatile chemistry.

1 Introduction

2 Cross-Dehydrogenative Coupling under Thermal Conditions

2.1 C(sp3)–C(sp3) Bond Formation

2.2 C(sp3)–C(sp2) Bond Formation

2.3 C(sp2)–C(sp2) Bond Formation

2.4 C(sp3)–C(sp) Bond Formation

3 Cross-Dehydrogenative Coupling under Photochemical Conditions

3.1 C(sp3)–C(sp3) Bond Formation

3.2 C(sp3)–C(sp2) and C(sp3)–C(sp) Bond Formation

4 Conclusion and Perspective

Additions of Aldehyde-Derived Radicals and Nucleophilic N-Alkylindoles to Styrenes by Photoredox Catalysis

The consecutive addition of acyl radicals and N-alkylindole nucleophiles to styrenes was established, as well as some additional radical–nucleophile combinations. Both aryl and aliphatic aldehydes give reasonable yields. The reaction proceeds best for α-substituted styrenes, effectively creating a quaternary all-carbon center. Some iridium-based photoredox systems are catalytically active; furthermore, a base is needed in this transformation. Radicals are formed by reductive perester cleavage and hydrogen atom transfer.

Alkylarylation of N-allylbenzamides and N-allylanilines with simple ethers for the direct construction of ether substituted dihydroisoquinolinones and indolines

A radical-initiated cascade addition and cyclization of N-allylbenzamides with simple ethers to construct ether-substituted dihydroisoquinolinones was performed in the presence of CuI. The cleavage of the sp³ C-H bond in ether and the sp² C-H bond in phenyl was involved in this reaction. Moreover, the arylalkylation of N-allylanilines was also realized under similar reaction conditions, providing ether-functionalized indolines in good to moderate yields.

Acid promoted radical-chain difunctionalization of styrenes with stabilized radicals and (N,O)-nucleophiles

A radical chain difunctionalization of styrenes does not require a catalyst, but activation of benzoyl peroxide by a strong acid.

Base-promoted domino radical cyclization of 1,6-enynes

A good regioselective, high atom-economical and transition-metal-free method for the synthesis of α-functionalized ether derivatives via the domino radical cyclization of 1,6-enynes is described. A series of α-functionalized ether derivatives could be easily obtained in good yields with wide functional group tolerance by using less toxic and inexpensive Cs₂CO₃ as the base. The control experiment results show that the reaction involves a radical process. This strategy provides a regioselective way toward the formation of dual C-C bonds in one step.