Ratiometric luminescent simultaneous sensing of aristolochic acids (I-IV) by a novel metal-organic framework and its nanowire

Aristolochic acids (AAs), which are a group of nitrophenanthrene carboxylic acids formed by Aristolochia plant, have become an increasing serious threat to humans due to their nephrotoxicity and carcinogenicity. Fast and accurate approaches capable of simultaneous sensing of aristolochic acids (I-IV) are vital to avoid intake of such compounds. In this research, the novel ratiometric fluorescence zinc metal-organic framework and its nanowire have been prepared. The two different coordination modes (tetrahedral configuration and twisted triangular bipyramidal configuration) within zinc metal-organic framework lead to the significant double emissions. The ratiometric fluorescence approach based on nanowire provides a broader concentration range (3.00 × 10-7~1.00 × 10-4 M) and lower limit of detection (3.70 × 10-8 M) than that based on zinc metal-organic framework (1.00 × 10-6~1.00 × 10-4 M, 5.91 × 10-7 M). The RSDs of the results are in the range 1.4-3.5% (nanowire). The density functional theory calculations and UV-Vis absorption verify that the sensing mechanism is due to charge transfer and energy transfer. Excellent spiked recoveries for AAs(I-IV) in soil and water support that nanowire is competent to simultaneously detect these targets in real samples, and the proposed approach has potential as a fluorescence sensing platform for the simultaneous detection of AAs (I-IV) in complex systems.

Synthesis and proton-conductive behaviour of two MOFs with covalently bonded imidazoles in the channels

Immobilization of imidazole molecules as proton carriers into MOFs to facilitate proton conduction is a general strategy for developing high proton conductive materials. Herein, we designed two imidazole substituted phthalic acid ligands and constructed two novel MOFs, {[Zr6(OH)16(H3L1)4]Cl8·20H2O}n [Zr-MOF; H3L1 = 2-(1H-imidazol-4-yl) methylaminoterephthalic acid] and {Gd(HCOO)(H2L2)2}n [Gd-MOF; H3L2 = 5-(1H-imidazol-4-yl)methylaminoisophthalic acid] and fully studied their porous nature, stability and water-assisted proton conduction. The resulting Zr-MOF exhibits a high proton conductivity of 1.82 × 10-2 S cm-1 at 98% RH and 80 °C, while Gd-MOF has a proton conductivity of 3.01 × 10-3 S cm-1 at 98% RH and 60 °C.

Comparative Analysis of Proton Conductivity in Two Zn-Based MOFs Featuring Sulfate and Sulfonate Functional Groups

Metal-organic frameworks (MOFs) have shown promising potential as proton-conducting materials due to their tunable structures and high porosity. In this study, two novel MOFs had been successfully synthesized, one containing sulfate groups (MOF-1; [Zn4(TIPE)2(SO4)4(H2O)]·5H2O) and the other containing sulfonate groups (MOF-2; [Zn2(TIPE)(5-sip)(NO3)0.66]·0.34NO3·17.5H2O) (TIPE = 1,1,2,2-tetrakis(4-(1H-imidazole-1-yl)phenyl)ethene, H35-sip = 5-sulfoisophthalicacid), and the effect of the two groups on the proton conductivity of Zn-based MOFs had been investigated and compared for the first time. The proton conductivity of these MOFs was systematically measured at different temperatures and humidity conditions. Remarkably, the results revealed significant differences in proton conductivity between the two sets of MOFs. At 90 °C and 98% RH, MOF-1 and MOF-2 achieved optimal proton conductivity of 4.48 × 10-3 and 5.69 × 10-2 S·cm-1, respectively. This was due to the structural differences arising from the presence of different functional groups, which subsequently affected the porosity and hydrophilicity, thereby influencing the proton conductivity. Overall, this comparative study revealed the influence of sulfate and sulfonate groups on the proton conductivity of Zn-based MOFs. This research provided a feasible idea for the development of advanced MOF materials with enhanced proton conductivity and opened up new possibilities for their application in proton devices.

Photomodulation of Proton Conductivity by Nitro-Nitroso Transformation in a Metal-Organic Framework

The design of a highly and photomodulated proton conductor is important for advanced potential applications in chemical sensors and bioionic functions. In this work, a metal-organic framework (MOF; Gd-NO2) with high proton conductivity is synthesized with a photosensitive ligand of 5-nitroisophthalic acid (BDC-NO2), and it provides remote-control photomodulated proton-conducting behavior. The proton conduction of Gd-NO2 reaches 3.66 × 10-2 S cm-1 at 98% relative humidity (RH) and 25 °C, while it decreases by ∼400 times after irradiation with a 355 nm laser. The newly generated and disappearing FT-IR characteristic peaks reveal that this photomodulated process is realized by the photoinduced transformation from BDC-NO2 to 5-nitroso-isophthalic acid (BDC-NO). According to density functional theory, the smaller electronegativity of the -NO group, the longer distance of the hydrogen bond between BDC-NO and H2O molecules, and the lower water adsorption energy of BDC-NO indicate that the irradiated sample possesses a poorer hydrophilicity and has difficulty forming rich hydrogen-bonded networks, which results in the remarkable decrease of proton conductivity.

Synthesis and performance analysis of zeolitic imidazolate frameworks for CO2 sensing applications

In this paper, we investigate the potential use of Zeolitic Imidazolate Frameworks (ZIF-8) as a sensing material for CO2 detection. Three synthesis techniques are considered for the preparation of ZIF-8, namely room temperature, microwave-assisted, and ball milling. The latter is a green and facile alternative for synthesis with its solvent-free, room-temperature operation. In addition, ball milling produces ZIF-8 samples with superior CO2 adsorption and detection characteristics, as concluded from fluorescence measurements. Characterization tests including X-ray diffraction (XRD), Fourier transform infrared (FTIR), Thermogravimetric analysis (TGA), Field emission scanning electron microscopy (FE-SEM) and Energy-dispersive X-ray spectroscopy (EDS) are conducted to inspect the structural morphology, the thermal stability, and elements content of the ZIF-8 samples obtained from the different aforementioned synthesis techniques. The characterization tests revealed the appearance of a new phase of ZIF-8 which is ZIF-L when deploying the ball milling technique with different structure, morphology, response to CO2 exposure and thermal stability when compared to its counterparts. Fluorescence measurements are carried out to evaluate the limit of detection (LOD), selectivity, and recyclability of the different ZIF-8 samples. The LOD of the ZIF-8 sample synthesized based on ball milling synthesis technique is 815.2 ppm, while LODs of the samples obtained from microwave and room temperature-based synthesis techniques are 1780.6 ppm and 723.8 ppm, respectively. This indicates that the room temperature and ball milling produced MOFs have comparable LODs. However, the room temperature procedure requires the use of a harmful solvent. The range of LOD demonstrates the suitable use of ZIF-8 for indoor air quality monitoring and other industrial applications.

Ultrahigh Proton Conductivities of Postmodified Hf(IV) Metal-Organic Frameworks and Related Chitosan-Based Composite Membranes

Recently, researchers have focused on preparing and studying proton exchange membranes. Metal-organic frameworks (MOFs) are candidates for composite membrane fillers due to their high crystallinity and structural characteristics, and Hf-based MOFs have attracted our attention with their high porosity and high stability. Therefore, in this study, Hf-based MOFs were doped into a cost-effective chitosan matrix as fillers to fabricate composite films having excellent proton conductivity (σ). First, the nanoscale MOFs Hf-UiO-66-(OH)₂ (1) and Hf-UiO-66-NH₂ (2) were chemically modified by a ligand design strategy to obtain SA-1 and CBD-2 bearing free -COOH units. The proton conductivities of SA-1 and CBD-2 under optimal test conditions reached 1.23 × 10^-2 and 0.71 × 10^-2 S cm^-1. After that, we prepared composite membranes CS/SA-1 and CS/CBD-2 by the casting method; tests revealed that the introduction of MOFs improved the stabilities and σ values of the membranes, and their best σ could reach above 10^-2 S cm^-1 under 100 °C/98% RH. Further structural characterization and activation energy calculation revealed the conductive mechanism of the composite films. This investigation not only proposes a novel chemical modification method for optimizing the σ of MOFs but also promotes the development of MOF-doped composite membranes and provides a basis for future applications of MOFs in fuel cells.

Stable Europium(III) Metal-Organic Framework Demonstrating High Proton Conductivity and Fluorescence Detection of Tetracyclines

A europium(III) metal-organic framework (MOF), namely, {[[(CH₃)₂NH₂]₃Eu₂(DTTP-2OH)₂(HCOO)(H₂O)]·4H₂O}_n (Eu-MOF, H₄DTTP-2OH = 2',5'-dihydroxy-[1,1':4',1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid) has been assembled through solvothermal method. The Eu-MOF is a three-dimensional (3D) (4,4,8)-connected topological framework with binuclear Eu(III) clusters as secondary building units, in which a richly ordered hydrogen bonding network formed among the free H₂O molecules, dimethylamine cations, and phenolic hydroxyl groups provides a potential pathway for proton conduction. The proton conductivity reaches the category of superionic conductors (σ > 10^-4 S cm^-1) at room temperature with a maximum conductivity of 1.91 × 10^-3 S cm^-1 at 60 °C and 98% RH. Moreover, it also can be used as a fluorescence sensor in aqueous solution with detection limits of 0.14 μM for tetracycline, 0.13 μM for oxytetracycline and 0.11 μM for doxycycline. These results pave new methods for constructing MOFs with high proton conductivity and responsive fluorescence.

Innovative Metal-Organic Frameworks for Targeted Oral Cancer Therapy: A Review

Metal-organic frameworks (MOFs) have proven to be very effective carriers for drug delivery in various biological applications. In recent years, the development of hybrid nanostructures has made significant progress, including developing an innovative MOF-loaded nanocomposite with a highly porous structure and low toxicity that can be used to fabricate core-shell nanocomposites by combining complementary materials. This review study discusses using MOF materials in cancer treatment, imaging, and antibacterial effects, focusing on oral cancer cells. For patients with oral cancer, we offer a regular program for accurately designing and producing various anticancer and antibacterial agents to achieve maximum effectiveness and the lowest side effects. Also, we want to ensure that the anticancer agent works optimally and has as few side effects as possible before it is tested in vitro and in vivo. It is also essential that new anticancer drugs for cancer treatment are tested for efficacy and safety before they go into further research.

Confinement effect of ionic liquid: Improve of the extraction performance of parent metal organic framework for phthalates

In order to better identify the hazards of pollutants, developing the analytical methods that can sensitively detect and precisely monitor the content of trace pollutants has been the constant pursuit. In this paper, a new solid phase microextraction coating-ionic liquid/metal organic framework (IL/MOF) was obtained through the IL-induced strategy and used for the solid phase microextraction (SPME) process. IL was introduced into metal-organic framework (MOF) cage based on the anion of ionic liquid could interact strongly with the zirconium nodes of UiO-66-NH₂. The introduction of IL not only increased the stability of composite, the hydrophobicity of IL also changed the environment of MOF channel, providing the hydrophobic effect to the targets. The confinement effect of IL effectively improved the extraction performance of parent MOF and the extraction performance of synthesized IL/UiO-66-NH₂ for phthalates (PAEs) were 1.3-3.0 times that of parent UiO-66-NH₂. Thanks to the strong interaction force (hydrogen bonding interaction, π-π stacking, hydrophobic interaction force), the IL/UiO-66-NH₂-coated fiber coupled with gas chromatography-mass spectrometer showed a wide linear ranges (1-5000 ng L^-1) with good correlation (R², 0.9855-0.9987), lower detection limit (0.2-0.4 ng L^-1) and satisfactory recoveries (95.3-119.3%) for PAEs. This article is dedicated to provide another way to improve the extraction performance of material.

Easy Handling and Cost-Efficient Processing of a Tb3+-MOF: The Emissive Capacity of the Membrane-Immobilized Material, Water Vapour Adsorption and Proton Conductivity

The development of convenient, non-complicated, and cost-efficient processing techniques for packing low-density MOF powders for industry implementation is essential nowadays. To increase MOFs' availability in industrial settings, we propose the synthesis of a novel 3D Tb-MOF (1) and a simple and non-expensive method for its immobilization in the form of pellets and membranes in polymethacrylate (PMMA) and polysulphone (PSF). The photoluminescent properties of the processed materials were investigated. To simulate industrial conditions, stability towards temperature and humidity have been explored in the pelletized material. Water-adsorption studies have been carried out in bulk and processed materials, and because of the considerable capacity to adsorb water, proton-conduction studies have been investigated for 1.

Fabrication and DFT Calculation of Amine-Functionalized Metal-Organic Framework as a Turn-On Fluorescence Sensor for Fe3+ and Al3+ Ions

Due to their important role in biological systems, it is urgent to develop a material that can rapidly and sensitively detect the concentration of Fe³⁺ and Al³⁺ ions. In this work, a brand-new Cd^II-based metal-organic framework [Cd(BTBD)₂(AIC)]_n (JXUST-18, BTBD = 4,7-bis(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole and H₂AIC = 5-aminoisophthalic acid) with a 4-connected sql topology was designed and synthesized. The symmetrical Cd^II centers are linked by AIC^2- ligands with μ₃-η¹:η¹:η¹:η¹ coordination mode to form a [Cd₂(COO)₂] secondary building unit (SBU). The contiguous SBUs are further connected by BTBD ligands to form a two-dimensional (2D) layer structure. JXUST-18 can remain stable in aqueous solutions with pH values of 3-12 or in boiling water. Luminescent experiments suggest that JXUST-18 displays more than eightfold fluorescence enhancement in the presence of Fe³⁺ and Al³⁺ ions, and the detection limits for Fe³⁺ and Al³⁺ ions are 0.196 and 0.184 μM, respectively. Furthermore, the change in luminescence color is uncomplicatedly distinguishable with the naked eye under ultraviolet light at 365 nm. In addition, a series of devices based on JXUST-18 including fluorescence test strips, lamp beads, and composite films were developed to detect metal ions via visual changes in luminescence color. Significantly, JXUST-18 is a rare MOF-based turn-on fluorescence sensor for the detection of Fe³⁺ ions. The theoretical calculation suggests that the complexation of Fe³⁺/Al³⁺ ions and the -NH₂ group contributes to fluorescence enhancement.

Construction of Water-Stable Rare-Earth Organic Frameworks with Ambient High Proton Conductivity Based on Zirconium Sandwiched Heteropolytungstate

Water-stable proton-conducting materials owning excellent performances at ambient temperatures are currently one of the crucial challenges. Herein, four water-stable three-dimensional polyoxometalate-based rare-earth organic frameworks have been successfully synthesized and formulated as H{Ln₄(L)₂(H₂O)₂₁[Zr₃(OH)₃(PW₉O₃₄)₂]}·15H₂O (1-3) (Ln = La (1), Ce (2), Pr (3); L = 3,5-pyridine dicarboxylic acid), which are the first examples of MOFs constructed by a zirconium sandwiched polyoxoanion. There are abundant coordinated water molecules functionalizing the Pr^III centers, and simultaneously, plenty of lattice water molecules are fitted into the channel of the framework. A continuous H-bonding network is found between the architectures and plays an important role in stabilizing the structure. Benefiting from the consecutive H-bonding networks, compounds 1-3 showed high proton conductivities at ambient temperature (up to 1.05 × 10^-3 S·cm^-1 under 98% RH) by a synergistic effect of the combined components.

Three layered cucurbit[6]uril-based metal-organic rotaxane networks functionalized by sulfonic groups for proton conduction

Three new cucurbit[6]uril (CB[6])-based metal-organic rotaxane networks (MORNs) (named CUST-711, CUST-712, and CUST-713) functionalized by a sulfonic group (-SO₃H) have been designed and synthesized via a hydrothermal method. All three compounds exhibited similar two-dimensional (2D) wave layer structures. Their stability under different temperature and relative humidity conditions has been investigated and all the compounds showed excellent stability. Furthermore, their proton conduction properties were also discussed in detail. Due to different structures and sulfonic group sites, the three compounds exhibited different proton conduction abilities of which CUST-712 exhibited an intrinsic relatively high proton conductivity (1.75 × 10^-4 S cm^-1 at 85 °C and 97% relative humidity). These results provide ideas for the design and synthesis of functional CB[6]-based metal-organic rotaxane frameworks (MORFs) as proton conducting materials.

Comparative Studies on the Proton Conductivities of Hafnium-Based Metal-Organic Frameworks and Related Chitosan or Nafion Composite Membranes

Hafnium (Hf)-based UiO-66 series metal-organic frameworks (MOFs) have been widely studied on gas storage, gas separation, reduction reaction, and other aspects since they were first prepared in 2012, but there are few studies on proton conductivity. In this work, one Hf-based MOF, Hf-UiO-66-fum showing UiO-66 structure, also known as MOF-801-Hf, was synthesized at room temperature using cheap fumaric acid as the bridging ligand, and then imidazole units were successfully introduced into MOF-801-Hf to obatin a doped product, Im@MOF-801-Hf. Note that both MOF-801-Hf and Im@MOF-801-Hf demonstrate excellent thermal, water, and acid-base stabilities. Expectedly, the maximum proton conductivity (σ) of Im@MOF-801-Hf (1.46 × 10^-2 S·cm^-1) is nearly 4 times greater than that of MOF-801-Hf (3.98 × 10^-3 S·cm^-1) under 100 °C and 98% relative humidity (RH). To explore their possible practical application value, we doped them into chitosan (CS) or Nafion membranes as fillers, namely, CS/MOF-801-Hf-X, CS/Im@MOF-801-Hf-Y, and Nafion/MOF-801-Hf-Z (X, Y, and Z are the doping percentages of MOF in the membrane, respectively). Intriguingly, it was found that CS/MOF-801-Hf-6 and CS/Im@MOF-801-Hf-4 indicated the highest σ values of 1.73 × 10^-2 and 2.14 × 10^-2 S·cm^-1, respectively, under 100 °C and 98% RH and Nafion/MOF-801-Hf-9 also revealed a high σ value of 4.87 × 10^-2 S·cm^-1 under 80 °C and 98% RH, which showed varying degrees of enhancement compared to the original MOFs or pure CS and Nafion membranes. Our study illustrates that these Hf-based MOFs and related composite membranes offer great potential in electrochemical fields.

Stable Lanthanide Metal-Organic Frameworks with Ratiometric Fluorescence Sensing for Amino Acids and Tunable Proton Conduction and Magnetic Properties

Four new isostructural lanthanide metal-organic frameworks (MOFs), namely {[Ln(DMTP-DC)_1.5(H₂O)₃]·DMF}_n [H₂DMTP-DC = 2',5'-dimethoxytriphenyl-4,4″-dicarboxylic acid; Ln^III = Eu^III (1), Gd^III (2), Tb^III (3), and Dy^III (4)], have been synthesized and characterized. Single-crystal structure analysis reveals that 1-4 are three-dimensional Ln-MOFs with rich H-bonding of coordinated H₂O molecules in the network channels. The X-ray diffraction patterns indicate that Ln-MOF 1 displays good stabilities in organic solvents and aqueous solutions with distinct pH values. Both 1 and 3 show characteristic emission of Ln^III ions. Ln-MOF 1 can be used as a ratiometric fluorescence sensor for arginine and lysine in aqueous solution, and the detection limits are 24.38 μM for arginine and 9.31 μM for lysine. All 1-4 show proton conductivity related to relative humidity (RH) and temperature, and the maximum conductivity values of 1-4 at 55 °C and 100% RH are 9.94 × 10^-5, 1.62 × 10^-4, 1.71 × 10^-4, and 2.67 × 10^-4 S·cm^-1, respectively. The value of σ increases with the decrease in ionic radius, indicating that the radius of the Ln^III ions can regulate the proton conductivity of these MOFs. Additionally, 2 exhibits a significant magnetocaloric effect (MCE) with a magnetic entropy change (-ΔS_m) of 18.86 J kg^-1 K^-1 for ΔH = 7 T at 2 K, and 4 shows weak field-induced slow relaxation of magnetization. The coexistence of good fluorescence sensing capability, attractive proton conductivity, and relatively large MCE in Ln-MOFs is rare, and thus, 1-4 are potentially multifunctional MOF materials.

Metal@COFs Possess High Proton Conductivity with Mixed Conducting Mechanisms

The inherent porous structures and aligned functional units inside the skeleton of covalent organic frameworks (COFs) provide an extraordinary promise for post-modification and deservedly expand their application in the field of proton conduction. Herein, we tactfully introduced copper ions into a two-dimensional COF (TpTta) furnished with ample N,O-chelating sites by a post-modification strategy to achieve two copper(II)-modified products, namely, CuCl₂@TpTta-3 and CuCl₂@TpTta-10. Inspiringly, the two modified COFs demonstrated the higher conductivities of 1.77 × 10^-3 and 8.81 × 10^-3 S cm^-1 under 100 °C and 98% relative humidity, respectively, among the previously reported COFs with higher σ values. In comparison to the pristine COFs, the σ values of CuCl₂@TpTta-3 and CuCl₂@TpTta-10 are boosted by 2 orders of magnitude. On the basis of structural analyses, nitrogen and water vapor adsorption tests, and proton conduction mechanism analysis, we deeply analyzed the reason why the conductivity of the modified COFs was significantly increased. To the best of our knowledge, it is the first time to employ the CuCl₂-modified strategy to boost the conductivity of COFs, which offers a wise idea for the fabrication of highly conductive materials in the field of fuel cells.

High Protonic Conductivity of Three Highly Stable Nanoscale Hafnium(IV) Metal-Organic Frameworks and Their Imidazole-Loaded Products

Attracted by the exceptional structural rigidity and inherent porous structures of the Hf-based metal-organic frameworks (MOFs), we adopted a rapid synthesis approach to preparing three nanoscale MOFs, Hf-UiO-66 (1), Hf-UiO-66-(OH)₂ (2), and Hf-UiO-66-NH₂ (3), and systematically explored the water-assisted proton conductivities of the original ones and the post-modified products. Interestingly, the proton conductivities (σ) of all three MOFs exhibit significant temperature and humidity dependence. At 98% RH and 100 °C, their optimal σ values can reach up to 10^-3 S·cm^-1. Consequently, imidazole units are loaded into 1-3 to obtain related MOFs, Im@1, Im@2, and Im@3, and the σ values of the imidazole-loaded products are boosted to 10^-2 S·cm^-1. Note that these modifications not only do not change the frameworks of the pristine MOFs but also do not affect their high chemical and water stability. The proton-conductive mechanisms of these MOFs before and after modification have been thoroughly discussed based on structural analyses, N₂ and H₂O vapor adsorptions, and activation energy values. The excellent structural stability as well as the durability and stability of their proton conduction ability indicate that these MOFs can be used in the field of fuel cells and so on.

Proton Conductive Lanthanide-Based Metal-Organic Frameworks: Synthesis Strategies, Structural Features, and Recent Progress

In the fields of proton exchange membrane fuel cells as well as impedance recognition, molecular sieve, and biochemistry, the development of proton conductive materials is essential. The design and preparation of the next generation of proton conductive materials-crystalline metal-organic framework (MOF) materials with high proton conductivity and excellent water stability-are facing great challenges. Due to the large radius and high positive charge of lanthanides, they often interact with organic ligands to exhibit high coordination numbers and flexible coordination configurations, resulting in the higher stability of lanthanide-based MOFs (Ln-MOFs) than their transition metal analogues, especially regarding water stability. Therefore, Ln-MOFs have attracted considerable attention. This review offers a view of the latest progress of proton conductive Ln-MOFs, including synthesis strategy, structural characteristics, and advantages, proton conductivity, proton conductive mechanism, and applications. More importantly, by discussing structure-property relationships, we searched for and analyzed design techniques and directions of development of Ln-MOFs in the future. The latest progress of synthesis strategy, structural characteristics, proton conductive properties and mechanism and applications on Ln-MOFs. Ln-MOFS Lanthanide-based MOFs, MOF metal-organic framework, PEMFC proton exchange membrane fuel cells.

Stable isomeric layered indium coordination polymers for high proton conduction

Stable isomeric layered indium coordination polymers with different coordinated anionic sites for high proton conduction.

Gd(III)-based metal-organic frameworks and coordination polymers for magnetic refrigeration

As the alternatives of expensive and increasingly shortage 3He for ultralow-temperaturerefrigeration, molecule-based magnetorefrigerant materials have attracted much attention in the past decades. Among them, Gd(III)-based metal-organic frameworks and coordination polymers...

Proton conductors with wide operating temperature domains achieved by applying a dual-modification strategy to MIL-101

Developing an efficient strategy for obtaining proton conductors with wide working temperature domains is of great significance for the wide application of proton conductors. To date, proton conductors that have high proton conductivity from subzero temperatures to high temperatures above 100 °C have been very rare. Herein, we prepared two composites, H₃PO₄@MIL-101-SO₃H(Cr) (1) and H₂SO₄@MIL-101-NH₂(Al) (2) by applying a dual-modification strategy to functionalize MOF MIL-101, that is, incorporating acidic guest molecules into the channels of MIL-101 while modifying the MIL-101 backbone with functional groups. Both composites have high proton conductivity over a broad temperature domain (-40 °C to above 150 °C) due to the complementary conduction or synthetic conduction of the backbone functional group and acidic guest molecules in different temperature ranges. The proton conductivities of 1 are 0.9 × 10^-1 S cm^-1 at 65 °C and 95% RH, 7.5 × 10^-5 S cm^-1 at -40 °C and 1.4 × 10^-2 S cm^-1 at 150 °C. Further, the proton conductivities of 2 are 5.8 × 10^-2 S cm^-1 at 65 °C and 95% RH, 7.1 × 10^-4 S cm^-1 at -40 °C and 2.5 × 10^-4 S cm^-1 at 170 °C. All the proton conductivities of the two composites in three temperature domains (low, moderate and high temperature) are at a high level among those of reported proton conductors. Moreover, their proton conductivities have good stability and durability in the broad temperature region from subzero temperatures to high temperatures above 100 °C.

A new three-dimensional twofold interpenetrated cadmium(II) metal-organic framework: synthesis, structure and photoluminescence properties

The design and synthesis of metal-organic frameworks (MOFs) have attracted much interest due to the aesthetics of their crystalline architectures and their potential applications as new functional materials. A new twofold interpenetrated three-dimensional (3D) MOF, namely, poly[[triaqua(μ₄-(2R,2'R)-2,2'-{[1,4-phenylenebis(carbonyl)]bis(azanediyl)}dipropionato-κ⁷O¹:O¹,O^1':O⁴:O⁴,O^4',O^4'')(μ₃-(2R,2'R)-2,2'-{[1,4-phenylenebis(carbonyl)]bis(azanediyl)}dipropionato-κ³O¹:O⁴:O⁴)dicadmium(II)] dihydrate], {[Cd₂(C₁₄H₁₄N₂O₆)₂(H₂O)₃]·2H₂O}_n, (I), has been synthesized by the reaction of Cd(CH₃COO)₂·2H₂O with the synthesized ligand (2R,2'R)-2,2'-{[1,4-phenylenebis(carbonyl)]bis(azanediyl)}dipropionic acid (H₂L). Single-crystal X-ray diffraction analysis reveals that the carboxylate groups from two crystallographically independent L^2- dianions link the cadmium cations into a one-dimensional helical secondary building unit (SBU). The resulting SBUs are extended into a 3D metal-organic framework via the terephthalamide moiety of the ligand as a spacer. In the crystal, two independent MOFs interpenetrate each other, thus producing a twofold interpenetrated 3D architecture, which shows an unprecedented 2-nodal (7,9)-connected net with the point (Schläfli) symbol (3⁷·4⁶·5⁸)(3⁸·4¹¹·5¹⁶·6). MOF (I) was further characterized by elemental analysis, IR spectroscopy, powder X-ray diffraction and thermogravimetric analysis. The photoluminescence properties and UV-Vis absorption spectrum of (I) have also been investigated. The MOF exhibits enhanced fluorescence emission with a high photoluminescence quantum yield of 31.55% and a longer lifetime compared with free H₂L.

High Proton Conduction in Two Highly Water-Stable Lanthanide Coordination Polymers from a Triazole Multicarboxylate Ligand

Two lanthanide coordination polymers (CPs) {[Er(Hmtbd)(H₂mtbd)(H₂O)₃]·2H₂O}_n (1) and [Yb(Hmtbd)(H₂mtbd)(H₂O)₃]_n (2) carrying an N-heterocyclic carboxylate ligand 5-(3-methylformate-1H-1,2,4-triazole-1-methyl)benzen-1,3-dicarboxylate (H₃mtbd) were prepared under solvothermal conditions. The single-crystal X-ray diffraction data demonstrate that 1 and 2 are isostructural and display 1D chain structure. Alternating current (AC) impedance measurements illustrate that the highest proton conductivities of 1 and 2 can attain 5.09 × 10^-3 and 3.09 × 10^-3 S·cm^-1 at 100 °C and 98% relative humidity (RH), respectively. The value of 1 exceeds those of most reported lanthanide-based crystalline materials and ranks second among the described Er-CPs under similar conditions, whereas the value for 2 is the highest proton conductivity among the previous Yb-CPs. Coupled with the structural analyses of the two CPs and H₂O vapor adsorption, the calculated E_a values help to deduce their proton conductive mechanisms. Notably, the N-heterocyclic units (triazole), carboxyl, and hydrogen-bonding network all play key roles in the proton-transfer process. The prominent proton conductive abilities of both CPs show great promise as efficient proton conductors.

Structure, Luminescent Sensing and Proton Conduction of a Boiling-Water-Stable Zn(II) Metal-Organic Framework

A novel Zn(II) metal-organic framework [Zn₄O(C₃₀H₁₂F₄O₄S₈)₃]_n, namely ZnBPD-4F4TS, has been constructed from a fluoro- and thiophenethio-functionalized ligand 2,2',5,5'-tetrafluoro-3,3',6,6'-tetrakis(2-thiophenethio)-4,4'-biphenyl dicarboxylic acid (H₂BPD-4F4TS). ZnBPD-4F4TS shows a broad green emission around 520 nm in solid state luminescence, with a Commission International De L'Eclairage (CIE) coordinate at x = 0.264, y = 0.403. Since d¹⁰-configured Zn(II) is electrochemically inert, its photoluminescence is likely ascribed to ligand-based luminescence which originates from the well-conjugated system of phenyl and thiophenethio moieties. Its luminescent intensities diminish to different extents when exposed to various metal ions, indicating its potential as an optical sensor for detecting metal ion species. Furthermore, ZnBPD-4F4TS and its NH₄Br-loaded composite, NH₄Br@ZnBPD-4F4TS, were used for proton conduction measurements in different relative humidity (RH) levels and temperatures. Original ZnBPD-4F4TS shows a low proton conductivity of 9.47 × 10^-10 S cm^-1 while NH₄Br@ZnBPD-4F4TS shows a more than 25,000-fold enhanced value of 2.38 × 10^-5 S cm^-1 at 40 °C and 90% RH. Both of the proton transport processes in ZnBPD-4F4TS and NH₄Br@ZnBPD-4F4TS belong to the Grotthuss mechanism with E_a = 0.40 and 0.32 eV, respectively.

Design Engineering, Synthesis Protocols, and Energy Applications of MOF-Derived Electrocatalysts

The core reactions for fuel cells, rechargeable metal-air batteries, and hydrogen fuel production are the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER), which are heavily dependent on the efficiency of electrocatalysts. Enormous attempts have previously been devoted in non-noble electrocatalysts born out of metal-organic frameworks (MOFs) for ORR, OER, and HER applications, due to the following advantageous reasons: (i) The significant porosity eases the electrolyte diffusion; (ii) the supreme catalyst-electrolyte contact area enhances the diffusion efficiency; and (iii) the electronic conductivity can be extensively increased owing to the unique construction block subunits for MOFs-derived electrocatalysis. Herein, the recent progress of MOFs-derived electrocatalysts including synthesis protocols, design engineering, DFT calculations roles, and energy applications is discussed and reviewed. It can be concluded that the elevated ORR, OER, and HER performances are attributed to an advantageously well-designed high-porosity structure, significant surface area, and plentiful active centers. Furthermore, the perspectives of MOF-derived electrocatalysts for the ORR, OER, and HER are presented.

Phase Transformation Dynamics in Sulfate-Loaded Lanthanide Triphosphonates. Proton Conductivity and Application as Fillers in PEMFCs

Phase transformation dynamics and proton conduction properties are reported for cationic layer-featured coordination polymers derived from the combination of lanthanide ions (Ln3+) with nitrilo-tris(methylenephosphonic acid) (H6NMP) in the presence of sulfate ions. Two families of materials are isolated and structurally characterized, i.e., [Ln2(H4NMP)2(H2O)4](HSO4)2·nH2O (Ln = Pr, Nd, Sm, Eu, Gd, Tb, Er, Yb; n = 4-5, Series I) and [Ln(H5NMP)]SO4·2H2O (Ln = Pr, Nd, Eu, Gd, Tb; Series II). Eu/Tb bimetallic solid solutions are also prepared for photoluminescence studies. Members of families I and II display high proton conductivity (10-3 and 10-2 S·cm-1 at 80 °C and 95% relative humidity) and are studied as fillers for Nafion-based composite membranes in PEMFCs, under operating conditions. Composite membranes exhibit higher power and current densities than the pristine Nafion membrane working in the range of 70-90 °C and 100% relative humidity and with similar proton conductivity.

Different Phenomena in Magnetic/Electrical Properties of Co(II) and Ni(II) Isomorphous MOFs

Two unprecedented and stable metal-organic frameworks, {[Co₂(H₂O)₂(L)(OH)]·2.5H₂O·0.5DMF} _n (1) and {[Ni₂(H₂O)₂(L)(OH)]·1.75H₂O} _n (2), have been synthesized (H₃L = 5-(5-carboxy-pyridin-3-yloxy)-isophthalic acid, DMF = N,N-dimethylformamide). Structural analysis shows that 1 and 2 are heteronuclear isomorphous, possessing a three-dimensional (3D) (4,8)-connected flu/fluorite topological framework formed through the interconnection of tetranuclear butterfly {M₄(COO)₆(OH)₂} clusters and the ligands. Although the frameworks of these two compounds are similar, their magnetic properties are different. Compound 1 exhibits an antiferromagnetic interaction in the high-temperature region, while 2 shows a weak ferromagnetic interaction in the whole-temperature region. Furthermore, considering the presence of hydroxyl groups and water molecules in the frameworks, we tested their proton conductivity. The efficient proton transfer pathway in the framework endowed 1 and 2 with excellent proton conductivities of 9.07 × 10^-5 and 1.29 × 10^-4 S·cm^-1 at 363 K and 98% relative humidity (RH), respectively.

Theoretical hydrogen bonding calculations and proton conduction for Eu(iii)-based metal-organic framework

A water-mediated proton-conducting Eu(iii)-MOF has been synthesized, which provides a stable proton transport channel that was confirmed by theoretical calculation. The investigation of proton conduction shows that the conductivity of Eu(iii)-MOF obtained at 353 K and 98% RH is 3.5 × 10-3 S cm-1, comparable to most of the Ln(iii)-MOF based proton conductors.

Metal-Organic Frameworks: Synthetic Methods and Potential Applications

Metal-organic frameworks represent a porous class of materials that are build up from metal ions or oligonuclear metallic complexes and organic ligands. They can be considered as sub-class of coordination polymers and can be extended into one-dimension, two-dimensions, and three-dimensions. Depending on the size of the pores, MOFs are divided into nanoporous, mesoporous, and macroporous items. The latter two are usually amorphous. MOFs display high porosity, a large specific surface area, and high thermal stability due to the presence of coordination bonds. The pores can incorporate neutral molecules, such as solvent molecules, anions, and cations, depending on the overall charge of the MOF, gas molecules, and biomolecules. The structural diversity of the framework and the multifunctionality of the pores render this class of materials as candidates for a plethora of environmental and biomedical applications and also as catalysts, sensors, piezo/ferroelectric, thermoelectric, and magnetic materials. In the present review, the synthetic methods reported in the literature for preparing MOFs and their derived materials, and their potential applications in environment, energy, and biomedicine are discussed.

Proton conductivities of four low dimensional MOFs: affected by the amount of chelated ligands

The smaller the proportion of the chelated ligand, the more water molecules in the compound, which increases the chance of forming continuous hydrogen bonds, enhances the water absorption ability, and improves the proton conductivity of the compound.

Facile Proton Transport in Ammonium Borosulfate-An Unhumidified Solid Acid Polyelectrolyte for Intermediate Temperatures

High proton conductivity is reported for unhumidified ammonium borosulfate, NH₄ [B(SO₄ )₂ ], a solid acid coordination polymer that contains 1D, hydrogen-bonded NH₄ ⁺ ···¹ _∞ [B(SO₄ )_4/2 ]^- chains. NH₄ [B(SO₄ )₂ ] is thermally stable to 320 °C and is amenable to sintering into monolithic, polycrystalline discs at 200 °C and about 300 MPa of uniaxial pressure. Impedance spectroscopy measurements reveal ionic conductivities for sintered ammonium borosulfate of 0.1 mS cm^-1 at 25 °C and up to 10 mS cm^-1 at 180 °C in ambient air. No superprotonic transition is observed in the temperature range of 25-180 °C. Ab initio molecular dynamics simulations show these high conductivities are aided by free rotation of the NH₄ ⁺ units and significant gyrational mobility of the SO₄ tetrahedra, which, in turn, provide facile pathways for proton locomotion. High conductivities, a wide operational temperature window, and tolerance to both ambient and anhydrous conditions make NH₄ [B(SO₄ )]₂ an attractive candidate electrolyte for intermediate-temperature hydrogen fuel cells that may enable operation at temperatures as high as 300 °C without active humidification.

An inorganic-organic hybrid MnIII{Mn}2 cluster consisting of rare Lindqvist-like Mn6 subunits with high proton conductivity

A new inorganic-organic hybrid Mn^III{Mn}₂ with rare Lindqvist-like Mn₆ subunits was synthesized. Our studies reveal the distinct advantages of the Mn^III{Mn}₂ compound as a potential material of proton exchange membranes, including its facile and cost-effective synthesis, insolubility in water, and most importantly, its maximum proton conductivity of 4.69 × 10^-3 S cm^-1 at 368 K and 97% RH.

Metal-Organic Frameworks as a Versatile Platform for Proton Conductors

Metal-organic frameworks (MOFs) are an intriguing type of crystalline porous materials that can be readily built from metal ions or clusters and organic linkers. Recently, MOF materials, featuring high surface areas, rich structural tunability, and functional pore surfaces, which can accommodate a variety of guest molecules as proton carriers and to systemically regulate the proton concentration and mobility within the available space, have attracted tremendous attention for their roles as solid electrolytes in fuel cells. Recent advances in MOFs as a versatile platform for proton conduction in the field of humidity condition proton-conduction, anhydrous atmosphere proton-conduction, single-crystal proton-conduction, and including MOF-based membranes for fuel cells, are summarized and highlighted. Furthermore, the challenges, future trends, and prospects of MOF materials for solid electrolytes are also discussed.

Gas Adsorption, Proton Conductivity, and Sensing Potential of a Nanoporous Gadolinium Coordination Framework

The new nanoporous framework [Gd₄(di-nitro-BPDC)₄(NO₂)₃(OH)(H₂O)₅]·(solvent) (I; di-nitro-BPDC^2- = 2,2'-dinitrobiphenyl-4,4'-dicarboxylate) has been designed and synthesized through a simple one-pot reaction. In addition to its exceptional thermal and water stabilities, I exhibited multifunctional properties. A sudden CO₂ uptake to a maximum of 4.51 mmol g^-1 (195 K and 1 bar) with notable selectivity over O₂ and N₂ (CO₂/O₂ = 39 at 195 K and 0.10 bar, CO₂/N₂ = 46 at 195 K and 0.10 bar) and an isosteric adsorption enthalpy of 20.7(4) kJ mol^-1 have been revealed. Depending on the temperature and humidity, I also showed distinguished superprotonic conductivities with a maximum value and activation energy of 6.17 × 10^-2 S cm^-1 (55 °C, 99 RH%, and 1 V AC voltage) and 0.43 eV, respectively. With respect to the linear dependence of conductivities on both temperature (25-55 °C at 99 RH%) and humidity (55-99 RH% at 25 °C), the potential of I in temperature and humidity sensing was evaluated, disclosing an excellent sensing resolution and exceptional accuracy, precision, and repeatability for the measurements.

A 3D open-framework iron hydrogenophosphate showing high proton conductance under water and aqua-ammonia vapor

Herein we report the first example of the proton conductivity of an open-framework metal phosphate (NH₃(CH₂)₃NH₃)₂–[Fe₄(OH)₃(HPO₄)₂(PO₄)₃]·4H₂O under aqua-ammonia vapor. Its optimized proton conductivity is 5 × 10⁻² S cm⁻¹ at 313 K and aqua-ammonium vapor from 1 M NH₃·H₂O solution. That is approximately two orders of magnitude greater than the maximum value under water vapor (8.0 × 10⁻⁴ S cm⁻¹ at 317 K and 99% RH). The proton transfer mechanism has been proposed in terms of the structural analyses, activation energy calculations, and PXRD determinations.

Herein we report the first example of the proton conductivity of an open-framework metal phosphate (NH₃(CH₂)₃NH₃)₂–[Fe₄(OH)₃(HPO₄)₂(PO₄)₃]·4H₂O under aqua-ammonia vapor.