[M8L4]8+-Type Squares Self-Assembled by Dipalladium Corners and Bridging Aromatic Dipyrazole Ligands for Iodine Capture

Square-like metallamacrocyclic palladium(II) complexes [M₈L₄]⁸⁺ (1-7) were synthesized by reacting aromatic dipyrazole ligands (H₂L¹-H₂L³ with pyromellitic arylimide-, 1,4,5,8-naphthalenetetracarboxylic arylimide-, and anthracene-based aromatic groups, respectively) with dipalladium corners ([(bpy)₂Pd₂(NO₃)₂](NO₃)₂, [(dmbpy)₂Pd₂(NO₃)₂](NO₃)₂, or [(phen)₂Pd₂(NO₃)₂](NO₃)₂, where bpy = 2,2'-bipyridine, dmbpy = 4,4'-dimethyl-2,2'-bipyridine, and phen = 1,10-phenanthroline) in aqueous solutions via metal-directed self-assembly. Metallamacrocycles 1-7 were fully characterized by ¹H and ¹³C nuclear magnetic resonance spectroscopy and electrospray ionization mass spectrometry, and the square structure of 7·8NO₃^- was further confirmed via single crystal X-ray diffraction. These square-like metallamacrocycles exhibit effective performance for iodine adsorption.

Generating water/MeOH-soluble and luminescent polymers by grafting 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) ligands onto a poly(ethylene-alt-maleic anhydride) polymer and cross-linking with terbium(III)

The synthesis of two new polymers made from P(E-alt-MA) (poly(ethylene-alt-maleic anhydride) and possessing 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) ligand side chains in 3 and 6 mol%, respectively (P1 and P2, respectively) is described. These polymers were shown to be soluble in MeOH solution and, in the case of P1, also in water, while P2 needed prolonged heating to enable water dissolution. Btp ligands are known for coordinating both d- and f-metal ions and so, herein, we demonstrate by using both UV-Vis absorption, fluorescence emission, as well as time-gated phosphorescence spectroscopies, that both P1 and P2 can bind to Tb(III) ions to give rise to luminescent polymers. From the analysis of the titration data, which demonstrated large changes in the emission intensity properties of the polymer upon Tb(III) binding (ground state changes were also clearly observed, with the absorption being red-shifted at lower energy), we show that the dominant stoichiometry in solution is 1 : 2 (M : L; Tb(III) : btp ratio) which implies that two btp ligands from the polymer background are able to crosslink through lanthanide coordination and that the backbone of the polymer is very likely to aid in coordinating the ions.

Stimuli-Responsive Properties of Supramolecular Gels Based on Pyridyl-N-oxide Amides

The nature of functional groups and their relative position and orientation play an important role in tuning the gelation properties of stimuli-responsive supramolecular gels. In this work, we synthesized and characterized mono-/bis-pyridyl-N-oxide compounds of N-(4-pyridyl)nicotinamide (L₁-L₃). The gelation properties of these N-oxide compounds were compared with the reported isomeric counterpart mono-/bis-pyridyl-N-oxide compounds of N-(4-pyridyl)isonicotinamide. Hydrogels obtained with L₁ and L₃ were thermally and mechanically more stable than the corresponding isomeric counterparts. The surface morphology of the xerogels of di-N-oxides (L₃ and diNO) obtained from the water was studied using scanning electron microscopy (SEM), which revealed that the relative position of N-oxide moieties did not have a prominent effect on the gel morphology. The solid-state structural analysis was performed using single-crystal X-ray diffraction to understand the key mechanism in gel formation. The versatile nature of N-oxide moieties makes these gels highly responsive toward an external stimulus, and the stimuli-responsive behavior of the gels in water and aqueous mixtures was studied in the presence of various salts. We studied the effect of various salts on the gelation behavior of the hydrogels, and the results indicated that the salts could induce gelation in L₁ and L₃ below the minimum gelator concentration of the gelators. The mechanical properties were evaluated by rheological experiments, indicating that the modified compounds displayed enhanced gel strength in most cases. Interestingly, cadmium chloride formed supergelator at a very low concentration (0.7 wt% of L₃), and robust hydrogels were obtained at higher concentrations of L₃. These results show that the relative position of N-oxide moieties is crucial for the effective interaction of the gelator with salts/ions resulting in LMWGs with tunable properties.

Unprecedented toughness in transparent, luminescent, self-healing polymers enabled via hierarchical rigid domain design

The preparation of luminescent self-healing materials simultaneously featuring superior integrated mechanical properties is still a great challenge because the relationship between self-healing ability and mechanical capacities is conflicted. Here, transparent luminescent materials with balanced self-healing behavior, extreme toughness, and fast elastic recovery are prepared via hierarchical rigid domain design by coordinating lanthanide (Ln³⁺) to terpyridine (TPy) moieties linked to the polymer chains formed through polymerization of tolylene-2,4-diisocyanate-terminated polypropylene glycol (PPG-NCO) and 1,6-hexanediamine (HDA). The hierarchical rigid domain containing lanthanide-terpyridine (Ln³⁺-TPy) coordination interactions and H-bonds formed by urea and urethane leads to a tough network that features unprecedented toughness of 133.35 MJ m^-3, which reaches 83% of that of typical spider silk (≈ 160 MJ m^-3) and is also dynamic for fast self-healing at ambient temperature. Besides, the multi-color emission, ranging from red through orange and yellow to green, can be achieved via adjusting the molar ratio of Eu³⁺/Tb³⁺. We believe that the strategy applied in this work provides some insights for the preparation of high mechanical strength luminescence materials with self-healing properties.

Hierarchical supramolecular co-assembly formation employing multi-component light-harvesting charge transfer interactions giving rise to long-wavelength emitting luminescent microspheres

Charge transfer (CT) interaction induced formation of a hierarchical supramolecular assembly has attracted attention due to its wide diversity of structural and functional characteristics. In the present work, we report the generation of green luminescent microspheres from the charge transfer interaction induced co-assembly of a bis-naphthyl dipicolinic amide (DPA) derivative with tetracyanobenzene (TCNB) for the first time. The properties of these self-assemblies were studied both in solution and the solid-state using spectroscopic and a variety of microscopy techniques. The X-ray crystal structure analysis showed a mixed stack arrangement of DPA and TCNB. The molecular orbital and energy level calculations confirm the charge transfer complex formation between DPA and TCNB. Furthermore, energy transfer was observed from the green luminescent CT complex to a red-emitting dye, pyronin Y, in the microsphere matrix, leading to the formation of a light-harvesting tri-component self-assembly.

Green luminescent microspheres, generated via charge-transfer interaction-induced hierarchical co-assembly of a bis-naphthyl dipicolinic amide derivative and tetracyanobenzene, transfer energy to long-wave emitting dye.

Coordination-Assembly of Lanthanide Supramolecular Hydrogels with Luminescent Multi-stimulus Response

Luminescent supramolecular hydrogels have shown extensive potential for a variety of applications due to their unique optical properties and biocompatibility. Coordination self-assembly provides a promising strategy for the preparation of supramolecular hydrogels. In this contribution, a series of luminescent lanthanide (Ln) supramolecular hydrogels HG-Ln_2nL_3n^1/2 are synthesized by coordination self-assembly of Ln ions and V shaped bis-tetradentate ligands (H₄L¹ and H₄L²) with different bent angles (∠B). Two rigid conjugated ligands H₄L¹ and H₄L² with bent angles (∠B ≈ 150°) featuring a 2,6-pyridine bitetrazolate chelating moiety were designed and synthesized, which generated hydrogels via the deprotonation self-assembly with lanthanide ions. Characteristic Eu³⁺ and Yb³⁺ emissions were realized in the corresponding hydrogels, with intriguing multi-stimulus response behaviors. The luminescence of the HG-Eu_2nL_3n¹ hydrogel can be enhanced or quenched when stimulated by diverse metal ions, attributed to the replacement of the coordinated lanthanide ions and changes in the intersystem crossing efficiency of the ligand. Furthermore, pH-responsive emission of the HG-Eu_2nL_3n¹ hydrogel has also been observed. Our work provides potential strategies for the design of next-generation smart responsive hydrogel materials with variable structures.

Ancillary ligand modulated stereoselective self-assembly of triple-stranded Eu(iii) helicate featuring circularly polarized luminescence

Creating optically pure metal assemblies is a hot research topic in the realms of chiral supramolecules. Here, three new triple-stranded europium(iii) helicates Eu₂L₃(L′)₂ [L = 4,4′-bis(4,4,4-trifluoro-1,3-dioxobutyl)diphenyl sulphide; L′ = 1,10-phenanthroline (Phen) or R/S-2,2′-bis(diphenylphosphinyl)-1,1′-binaphthyl (R/S-BINAPO)] were synthesized in order to investigate the effects of ancillary ligands on controlling the stereoselective self-assembly of lanthanide helicates. X-ray single crystal structure analysis showed that Eu₂L₃(Phen)₂ crystalized in an achiral space group P1̄ with the equivalent amount of P and M helicates in one single cell. The isolated Eu₂L₃(S-BINAPO)₂ and Eu₂L₃(R-BINAPO)₂ were verified to be enantiopure by ¹H, ¹⁹F, ³¹P NMR and DOSY NMR analyses. Additionally, the mirror-image CD spectra also demonstrated the successful syntheses of the enantiomers and the presence of an effective chirality transformation from BINAPO to achiral L. Furthermore, the perfect mirror-image circularly polarized luminescence (CPL) spectra of Eu₂L₃(S-BINAPO)₂ and Eu₂L₃(R-BINAPO)₂ indicated the existence of the excited state chirality of the Eu³⁺ center associated with |g_lum| values reaching 0.112. In addition, the photophysical properties of three helicates were also discussed.

Chiral ancillary ligands (R/S-BINAPO) modulated the stereoselective self-assembly of lanthanide helicates, which presented strong CPL with |g_lum| values up to 0.112 and high luminescence quantum yield up to 34%.

Highlights of the development and application of luminescent lanthanide based coordination polymers, MOFs and functional nanomaterials

The development of lanthanide based coordination polymer and metal-organic framework (CPs and MOFs) nanomaterials as novel functional (e.g. luminescent and magnetic) materials has attracted significant attention in recent times. This is in part due to the wide, but yet unique coordination requirements that the f-metal ions possess, as well as their attractive physical properties, which are often transferred to the bulk material. Hence, there is no surprise, that the design, synthesis and characterisation of lanthanide based CP/MOF materials (featuring either 'pure' lanthanides, or a mixture of both f- and d-metal ions) for applications in gas and small molecule absorption, storage, conversion/catalysis, chemical sensing, bio-imaging, drug delivery, etc. has been a prominent feature in the scientific literature. In this review, we give a selected overview of some of the recent developments in the area of Ln CP/MOF based nanomaterials for sensing, optical materials and bio-medicine research, as well as making reference to some more established examples, with the view of introducing, particularly to new researchers to the field, the powerful and attractive features of lanthanide based materials.

Tuning Gel State Properties of Supramolecular Gels by Functional Group Modification

The factors affecting the self-assembly process in low molecular weight gelators (LMWGs) were investigated by tuning the gelation properties of a well-known gelator N-(4-pyridyl)isonicotinamide (4PINA). The N-H∙∙∙N interactions responsible for gel formation in 4PINA were disrupted by altering the functional groups of 4PINA, which was achieved by modifying pyridyl moieties of the gelator to pyridyl N-oxides. We synthesized two mono-N-oxides (INO and PNO) and a di-N-oxide (diNO) and the gelation studies revealed selective gelation of diNO in water, but the two mono-N-oxides formed crystals. The mechanical strength and thermal stabilities of the gelators were evaluated by rheology and transition temperature (Tgel) experiments, respectively, and the analysis of the gel strength indicated that diNO formed weak gels compared to 4PINA. The SEM image of diNO xerogels showed fibrous microcrystalline networks compared to the efficient fibrous morphology in 4PINA. Single-crystal X-ray analysis of diNO gelator revealed that a hydrogen-bonded dimer interacts with adjacent dimers via C-H∙∙∙O interactions. The non-gelator with similar dimers interacted via C-H∙∙∙N interaction, which indicates the importance of specific non-bonding interactions in the formation of the gel network. The solvated forms of mono-N-oxides support the fact that these compounds prefer crystalline state rather than gelation due to the increased hydrophilic interactions. The reduced gelation ability (minimum gel concentration (MGC)) and thermal strength of diNO may be attributed to the weak intermolecular C-H∙∙∙O interaction compared to the strong and unidirectional N-H∙∙∙N interactions in 4PINA.

Chiral luminescent lanthanide complexes possessing strong (samarium, SmIII) circularly polarised luminescence (CPL), and their self-assembly into Langmuir-Blodgett films

The lanthanide directed self-assembly of chiral amphiphilic 2,6-pyridinedicarboxylic acid based ligands 1 and 2 with various Ln(CF₃SO₃)₃ (Ln = Tb^III, Sm^III, Lu^III, Dy^III) salts was studied in CH₃CN and evaluated with the expected 1 : 3 and 1 : 1 Ln : Ligand species forming in solution. Ligand chirality was retained and transferred, as depicted by circular dichroism (CD) and circularly polarised luminescence (CPL) measurements (for Tb^III and Sm^III), to the lanthanide centre upon complexation with high dissymmetry factor values for the Sm^III complexes obtained (g_lum = -0.44 and 0.29 and 0.45 and -0.23 for the ⁴G_5/2→⁶H_5/2 and the ⁴G_5/2→⁶H_7/2 transitions of Sm·1₃ and Sm·2₃, respectively). The ability of the complexes to form stable Langmuir monolayers at the air-water interface was also established while Langmuir-Blodgett films of Tb·L₃ and Sm·L₃ exhibited lanthanide luminescent emission.