In situ construction of Ag/Bi2O3/Bi5O7I heterojunction with Bi-MOF for enhance the photocatalytic efficiency of bisphenol A by facet-coupling and s-scheme structure

In this study, Ag/Bi2O3/Bi5O7I with s-scheme heterostructures were successfully synthesized in situ by nano-silver modification of CUA-17 and halogenated hydrolysis.The growth rate of Bi2O3 crystals was effectively controlled by adjusting the doping amount of Ag, resulting in the formation of a facet-coupling heterojunctions. Through the investigation of the microstructure and compositional of catalysts, it has been confirmed that an intimate facet coupling between the Bi2O3 (120) facet and the Bi5O7I (312) facet, which provides robust support for charge transfer. Under visible light irradiation, the AgBOI.3 heterojunction photocatalyst exhibited an outstanding degradation rate of 98.2% for Bisphenol A (BPA) with excellent stability. Further characterization using optical, electrochemical, impedance spectroscopy, and electron spin resonance techniques revealed significantly enhanced efficiency in photogenerated charge separation and transfer, and confirming the s-scheme structure of the photocatalyst. Density functional theory calculations was employed to elucidate the mechanism of BPA degradation and the degradation pathway of BPA was investigated by LC-MS. Finally, the toxicity of the degradation intermediates was evaluated using T.E.S.T software.

Reasonable decoration of CuO/Cd0.5Zn0.5S nanoparticles onto flower-like Bi5O7I as boosted step-scheme photocatalyst for reinforced photodecomposition of bisphenol A and Cr(VI) reduction in wastewater

Building S-scheme heterostructures is a sophisticated approach to receiving outstanding catalysts for environmental detoxification. Herein, ternary CuO/Cd0.5Zn0.5S/Bi5O7I (CO/CZS/BOI) nanocomposites were constructed by in-situ decorating of CuO and Cd0.5Zn0.5S nanoparticles onto Bi5O7I micro-sphere in a facile route. The optimal CO/CZS/BOI reflected reinforced bisphenol A (BPA) photo-oxidation (95% in 70 min) and Cr(VI) photo-reduction (96.6 in 60 min) under visible light. Besides, CO/CZS/BOI afforded 5.10 (4.44), 4.42 (3.71), and 6.60 (5.27) fold reinforcement in the BPA (Cr(VI)) photo-reaction rate compared to BOI, CZS, and CO, respectively. This behavior was linked to the development of S-scheme mechanisms resulting from the co-effects of BOI, CZS, and CO in retaining the optimum redox capacity, facilitating the dissolution of photo-carriers, increasing reactive sites, and strengthening the visible-light response. The parameters influencing the catalytic reaction of CO/CZS/BOI, such as light intensity, catalyst dosage, and pH, were deeply studied. The quenching tests declared the prominent roles •O2- and •OH in the breaking down of BPA and the participation of electrons and •O2- in the photocatalytic conversion of Cr(VI). The cyclic tests verified the robust photostability of CO/CZS/BOI, which is associated with the reintegration process between the free h+ coming from CZS and the photo-induced e- of CO and BOI in the S-scheme system. In conclusion, the present study provides a profound understanding of the photo-reaction mechanism of CO/CZS/BOI and introduces a novel concept for constructing a superior dual-Scheme system for efficient wastewater detoxification.

Recent advancement in Bi5O7I-based nanocomposites for high performance photocatalysts

Bi₅O₇I belongs to the family of bismuth oxyhalides (BiOX, X = Cl, Br, I), having a unique layered structure with an internal electrostatic field that promotes the separation and transfer of photo-generated charge carriers. Interestingly, Bi₅O₇I exhibits higher thermal stability compared to its other BiOX member compounds and absorption spectrum extended to the visible region. Bi₅O₇I has demonstrated applications in diverse fields such as photocatalytic degradation of various organic pollutants, marine antifouling, etc. Unfortunately, owing to its wide band gap of ∼2.9 eV, its absorption lies mainly in the ultraviolet region, and a tiny portion of absorption lies in the visible region. Due to limited absorption, the photocatalytic performance of pure Bi₅O₇I is still facing challenges. In order to reduce the band gap and increase the light absorption capability of Bi₅O₇I, doping and formation of heterostructure strategies have been employed, which showed promising results in the photocatalytic performance. In addition, the plasmonic heterostructures of Bi₅O₇I were also developed to further boost the efficiency of Bi₅O₇I as a photocatalyst. Here, in this review article, we present such recent efforts made for the advanced development of Bi₅O₇I regarding its synthesis, properties and applications. The strategies for photocatalytic performance enhancement have been discussed in detail. Moreover, in the conclusion section, we have presented the current challenges and discussed possible prospective developments in this field.

Transformation of phase and heterojunction type by using HAc-adsorbed Bi(NO3)3 as a Bi source

Generally, preparing high-efficiency heterojunction photocatalysts via a facile room-temperature route is attractive from the perspective of energy and labor saving. Herein, by using dried and glacial acetic acid (HAc)-adsorbed bismuth nitrate, instead of Bi(NO₃)₃·5H₂O, as a Bi source, a β-Bi₂O₃/Bi₅O₇I heterojunction with well dispersed flowery hierarchical architecture was synthesized, which endows it with high surface area, open channels and good light harvest. More importantly, the change of the precursor achieved a successful transformation for both of phase and heterojunction type, i.e. from type-Ⅰ BiOI/[Bi₆O₅(OH)₃](NO₃)₅·3H₂O (labeled as BiOI/BBN) to Z-scheme β-Bi₂O₃/Bi₅O₇I heterojunction. Since both β-Bi₂O₃ and Bi₅O₇I are visible light responsive, β-Bi₂O₃/Bi₅O₇I exhibited improved visible-light photocatalytic activity for the degradation of tetracycline (TC) and malachite green (MG) with apparent reactant rate (k_app) values about 10 and 11 times higher than those of BiOI/BBN. Besides, the presence of more oxygen vacancies also contributed to the enhancement in photocatalytic performance.

MOFs Derived Hetero-ZnO/Fe2O3 Nanoflowers with Enhanced Photocatalytic Performance towards Efficient Degradation of Organic Dyes

It is still a challenge for wastewater treatment to develop efficient yet low-cost photocatalysts on a large scale. Herein, a facile yet efficient method was devised to successfully synthesize ZnO/Fe₂O₃ nanoflowers (NFs) by using metal organic framework ZIF-8 as the precursor. The photocatalytic activities of the as-prepared hetero-ZnO/Fe₂O₃ NFs are purposefully evaluated by photocatalytic degradation of methylene blue (MB) and methyl orange (MO) under UV light irradiation. The resulting ZnO/Fe₂O₃ NFs display even higher photocatalytic activities than those of single-phase ZnO and Fe₂O₃ as a photocatalyst for the degradation of both MB ad MO. Particularly, nearly 100% MB can be photocatalytically degraded in 90 min under UV light irradiation using the hetero-NFs photocatalyst. The enhanced photocatalytic properties are probably ascribed to the synergistic contributions from the suitable band alignment of ZnO and Fe₂O₃, large surface area, and strong light absorption property. Radical scavenger experiments prove that the photogenerated holes, ·OH and ·O₂-, play key roles in photocatalytic degradation process of organic dyes. Accordingly, the photocatalytic degradation mechanism of hetero-ZnO/Fe₂O₃ NFs towards dyes is tentatively proposed. The work contributes an effective way to rationally design and fabricate advanced photocatalysts with heterojunction structures for photocatalytic applications.

Phase transformation and heterojunction construction of bismuth oxyiodides by grinding-assisted calcination in the presence of thiourea and their photoactivity

Bismuth-rich oxyhalides are promising photocatalysts due to their special layered structure and adjustable band gap energy. In this work, a series of bismuth oxyiodides were fabricated by grinding-assisted calcination in the presence of thiourea, where grinding-induced mechanical force could accelerate the decomposition reaction and thiourea could prohibit the crystal particles from growing due to coordination action. The combined effect of grinding and thiourea could decrease the temperature of phase transformation of bismuth oxyiodides. Among these, heterojunction Bi4O5I2/Bi5O7I containing uniform flower-like microspheres assembled by ultra-thin nanosheets exhibited the highest photocatalytic activity and favorable stability for the degradation of the antibiotic tetracycline under visible light irradiation. This work could provide a good reference for the design of bismuth-rich oxyhalide heterojunction for photocatalytic applications.

Controlled synthesis of Bi2O2CO3 nanorods with enhanced photocatalytic performance

Bi₂O₂CO₃ nanorod is synthesized via solid–gas high temperature method and exhibits excellent photocatalytic activity for degrading salicylic acid.

2D/1D Bi12O17Cl2/β-Bi2O3 heterojunction photocatalysts with boosted photocatalytic performance

A novel 2D/1D Bi₁₂O₁₇Cl₂/β-Bi₂O₃ heterostructure displays excellent photocatalytic degradation of methyl orange and phenol under solar light irradiation. The enhanced photocatalytic activity is ascribed to the unique vertical 2D Bi₁₂O₁₇Cl₂ nanosheets.

Green and controllable synthesis of one-dimensional Bi2O3/BiOI heterojunction for highly efficient visible-light-driven photocatalytic reduction of Cr(VI)

BiOI nanosheets have been successfully deposited on the porous Bi₂O₃ nanorobs via a one-pot precipitation method. The physicochemical features of the as-prepared materials were characterized in detail by a series of techniques, and the results revealed that BiOI nanosheets were evenly distributed on the porous Bi₂O₃ nanorobs. Because of higher photogenerated electron-hole pairs separation efficiency and the larger specific surface area compared to the pristine Bi₂O₃ and BiOI, the 50%Bi₂O₃/BiOI composite exhibited significantly enhanced photocatalytic activity for Cr(VI) reduction under visible light irradiation, and the reduction rate constant was 0.02002 min^-1, which was about 27.4 and 2.6 times higher than that of pure Bi₂O₃ (0.00073 min^-1) and BiOI (0.00769 min^-1), respectively. Moreover, the 50%Bi₂O₃/BiOI composite also possessed the excellent photochemical stability and recyclability, thereby facilitating its wastewater treatment application.

Composite Magnetic Photocatalyst Bi₅O₇I/MnxZn1-xFe₂O₄: Hydrothermal-Roasting Preparation and Excellent Photocatalytic Activity

A new composite magnetic photocatalyst, Bi₅O₇I/Mn_xZn_1-xFe₂O₄, prepared by a hydrothermal-roasting method was studied. The photocatalytic properties of Bi₅O₇I/Mn_xZn_1-xFe₂O₄ were evaluated by degradation of Rhodamine B (RhB) under simulated sunlight irradiation, and the structures and properties were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), ultraviolet-visible light (UV-Vis) diffuse reflectance spectra (DRS), and a vibrating sample magnetometer (VSM). The results indicated that Bi₅O₇I/Mn_xZn_1-xFe₂O₄ was an orthorhombic crystal, which was similar to that observed for Bi₅O₇I. Bi₅O₇I/Mn_xZn_1-xFe₂O₄ consisted of irregularly shaped nanosheets that were 40⁻60 nm thick. The most probable pore size was 24.1 nm and the specific surface area was 7.07 m²/g. Bi₅O₇I/Mn_xZn_1-xFe₂O₄ could absorb both ultraviolet and visible light, and the energy gap value was 3.22 eV. The saturation magnetization, coercivity and residual magnetization of Bi₅O₇I/Mn_xZn_1-xFe₂O₄ were 3.9 emu/g, 126.6 Oe, and 0.7 emu/g respectively, which could help Bi₅O₇I/Mn_xZn_1-xFe₂O₄ be separated and recycled from wastewater under the action of an external magnetic field. The recycling experiments revealed that the average recovery rate of the photocatalyst was 90.1%, and the photocatalytic activity was still more than 81.1% after five cycles.

Plasmon Ag and CdS quantum dot co-decorated 3D hierarchical ball-flower-like Bi5O7I nanosheets as tandem heterojunctions for enhanced photothermal–photocatalytic performance

Bi₅O₇I/Ag/CdS tandem heterojunction photocatalysts show excellent photothermal and photocatalytic performance, which is attributed to the formation of tandem heterojunctions, surface plasmon resonance, and 3D hierarchical structure.