"Unveiling marigold assembled micro flowers of tungsten oxide towards solid-state flexible pouch and coin cell supercapacitors"

Marigold analogues micro flowers of tungsten oxide (WO3) have been grown in thin film form through simple and cost-effective solution chemistry approach on stainless steel substrate. Aqueous precursor involving WO4-2 ions agglomerated as self-sacrificing template growing initially into the nano-petal, followed by self-assembly; leading to marigold analogues micro flower surface architecture. This enthralling morphology motivated us not only to fabricate supercapacitive electrode but also to design complete solid-state supercapacitor devices in dual configurations: flexible pouch cell and coin cell. Interestingly, both devices even in symmetric configuration yields remarkable potential window of 1.82 V when sandwiched by gel inclusive of Li+ ions dispersed in non-conducting polyvinyl alcohol matrix. Solid-state flexible pouch cell and coin cell delivered specific capacitances of 103.98 ± 3.59 and 30.09 ± 1.03 F/g respectively at a scan rate of 5 mV/s. Assembled electrode, coin-cell and flexible pouch-cells have been well assessed in-depth through specific capacitances using cyclic voltammetry and galvanostatic charge discharge, diffusive and capacitive contributions, mechanical bending tests, electrochemical active surface area, and electrochemical impedance analysis. Practical applicability has been demonstrated for designed flexible pouch cell to run small fan and light emitting diode panel whereas coin cell to run light emitting diode panel.

Advances in Electrochemical and Catalytic Performance of Nanostructured FeCo2 O4 and Its Composites

It is well established that the excessive and uncontrolled use of fossil fuels and organic chemicals have put a risk to the earth's environment and the life that sustains within it. Carbon-free, sustainable, alternative energy technologies have therefore become the prime focus of current research. Smart inorganic materials have emerged as the potential solution to suffice energy needs and remediate the organic pollutants discharged to the environment. One such promising, versatile material is FeCo₂ O₄ which has gained immense research interest in the present decade due to its high efficiency and performance in energy and environmental applications. Innovative material design strategies involving the interplay of nanostructured morphology, chemical composition, redox surface states, and defect engineering have significantly enhanced both electrochemical and catalytic properties of FeCo₂ O₄ . Therefore, this review article aims to provide the first-ever comprehensive account of the latest research and developments in design-synthesis strategies, characterization techniques, and applications of nanostructured FeCo₂ O₄ and its composites in various electrochemical as well as catalytic applications. A detailed account of the nanostructured FeCo₂ O₄ and its composites in various energy storage and conversion devices such as supercapacitors (SCs), batteries, and fuel cells has been presented. Furthermore, a special section has been devoted to highlight the role of FeCo₂ O₄ in enhancing the sluggish reaction kinetics of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in water splitting application. This review also highlights the role of nanostructured FeCo₂ O₄ in photocatalytic waste water treatment, gas sensing, and dual-phase membrane technologies wherein FeCo₂ O₄ has demonstrated promising performance.

Boosting photoresposive ability of WO3-Bi2O3nanocomposite rods via annealing-induced intrinsic precipitation of nanosized Bi particles

In this study, Bi-particle-functionalized tungsten trioxide-bismuth oxide (WO₃-Bi₂O₃) composite nanorods were prepared by integrating sputtering and hydrothermal syntheses with an appropriate postannealing procedure to induce Bi particle precipitation. Unlike other routes in which metal particle decoration is achieved externally, in this study, photoresponsive one-dimensional WO₃-Bi₂O₃composite nanorods were decorated with Bi particles by using the internal precipitation method. Structural analysis revealed that the Bi-metal-particle-functionalized WO₃-Bi₂O₃composite nanorods with particle size ranging from 5 to 10 nm were formed through hydrogen gas annealing at an optimal annealing temperature of 350 °C. Compared with the pristine WO₃nanorod template, the Bi-WO₃-Bi₂O₃composite nanorods exhibited higher photoresponsive performance, substantial photogenerated charge transfer ability, and efficient separation of photogenerated electron-hole pairs. The study results indicated that the Bi-WO₃-Bi₂O₃composite nanorods had superior decontamination ability and excellent stability toward RhB dye as compared with pristine WO₃. Moreover, the photogenerated charge separation and migration efficiencies of the WO₃-Bi₂O₃nanorods could be tuned through appropriate reduction of the surface oxide layer; this is a promising approach to designing WO₃-Bi₂O₃nanorods with high photoactive performance.

Designing a Rare DNA-Like Double Helical Microfiber Superstructure via Self-Assembly of In Situ Carbon Fiber-Encapsulated WO3-x Nanorods as an Advanced Supercapacitor Material

Double helical DNA structure is one of the most beautiful and fascinating nanoarchitecture nature has produced. Mimicking nature's design by the tailored synthesis of semiconductor nanomaterials such as WO₃ into a DNA-like double helical superstructure could impart special properties, such as enhanced stability, electrical conductivity, information storage, signal processing, and catalysis, owing to the synergistic interaction across helices. However, double helical WO₃ synthesis is extremely challenging and has never been reported earlier. This investigation presents the first-ever report on a facile synthesis route for designing a DNA-like double helical WO_3-x/C microfiber superstructure via self-assembly of in situ carbon fiber-encapsulated WO_3-x nanorods. This innovative design strategy is completely template-free and does not require predesigned helical templates or hydro/solvothermal treatment. Detailed spectroscopic material characterization and electrochemical studies confirmed that the double helical structure with carbon fiber-WO_3-x heterostructures enabled effective induction and distribution of oxygen vacancies along with W⁵⁺/W⁶⁺ redox surface states. Furthermore, faster electrode-electrolyte interfacial kinetics, improved electrical conductivity, and cycling stability has been observed in the carbon fiber-WO_3-x heterostructures which resulted in a high area specific capacitance of 401 mF cm^-2 at 2 mA cm^-2 with excellent capacitance retention of >94% for more than 5000 cycles. Additionally, the carbon fiber-WO_3-x heterostructures demonstrated promising performance when fabricated in a solid-state asymmetric supercapacitor device with the power density of 498 W kg^-1 at an energy density of 15.4 W h kg^-1. Therefore, the rare DNA-like double helical WO_3-x/C superstructure synthesized in this study could open new doorways toward in situ, facile fabrication of double helical superstructures for energy and environmental applications.

High-performance supercapacitor electrode based on naphthoquinone-appended dopamine neurotransmitter as an efficient energy storage material

NQ-DP based organic material was successfuly synthesized and employed as an efficient pseudocapacitor material.

Designing neurotransmitter dopamine-functionalized naphthalene diimide molecular architectures for high-performance organic supercapacitor electrode materials

Naphthalenediimide-dopamine conjugates were successfully synthesized, and the influence of dopamine, a neurotransmitter, on the supercapacitor properties of a NDI scaffold was explored.

Super porous TiO2 photocatalyst: Tailoring the agglomerate porosity into robust structural mesoporosity with enhanced surface area for efficient remediation of azo dye polluted waste water

The low surface area of TiO₂ (50 m²g^-1 - Degussa P25) due to randomly oriented, agglomerated nanostructures and charge carrier recombination tendency, has till date been its major limitation for photocatalytic remediation of polluted wastewater. This study presents an innovative process to design super porous TiO₂ nanostructures with high effective surface area (238 m²g^-1), robust, structurally ordered mesoporosity via a simple sol-gel assisted reflux method. Detailed material characterization studies suggest that the higher degree of intermolecular ligation in novel templates such as butanetetracarboxylic or tricarballylic acid modified titanium hydroxide gels resulted in retainment of the porous structure during the urea assisted combustion synthesis. The induction of robust structural porosity is accompanied by a reduction in pore size distribution, an increase in pore volume leading to significantly higher total surface area of the synthesized TiO_2. Detailed investigation of dye adsorption kinetics and photocatalytic degradation kinetics, complemented by kinetic modeling analysis confirmed that the super porous TiO₂ with robust mesoporous structure outperforms the rest of synthesized TiO₂ catalyst (having only agglomerate porosity) in terms of its superior adsorption capacity, faster diffusion kinetics and photocatalytic activity for degradation of Amaranth dye. Thus, the super porous TiO₂ shows promising potential for application in sustainable photocatalytic technology for remediation of wastewater contaminated with azo dyes.

Review on Recent Progress in the Development of Tungsten Oxide Based Electrodes for Electrochemical Energy Storage

Current progress in the advancement of energy-storage devices is the most important factor that will allow the scientific community to develop resources to meet the global energy demands of the 21st century. Nanostructured materials can be used as effective electrodes for energy-storage devices because they offer various promising features, including high surface-to-volume ratios, exceptional charge-transport features, and good physicochemical properties. Until now, the successful research frontrunners have focused on the preparation of positive electrode materials for energy-storage applications; nevertheless, the electrochemical performance of negative electrodes is less frequently reported. This review mainly focuses on the current progress in the development of tungsten oxide-based electrodes for energy-storage applications, primarily supercapacitors (SCs) and batteries. Tungsten is found in various stoichiometric and nonstoichiometric oxides. Among the different tungsten oxide materials, tungsten trioxide (WO₃ ) has been intensively investigated as an electrode material for different applications because of its excellent charge-transport features, unique physicochemical properties, and good resistance to corrosion. Various WO₃ composites, such as WO₃ /carbon, WO₃ /polymers, WO₃ /metal oxides, and tungsten-based binary metal oxides, have been used for application in SCs and batteries. However, pristine WO₃ suffers from a relatively low specific surface area and low energy density. Therefore, it is crucial to thoroughly summarize recent progress in utilizing WO₃ -based materials from various perspectives to enhance their performance. Herein, the potential- and pH-dependent behavior of tungsten in aqueous media is discussed. Recent progress in the advancement of nanostructured WO₃ and tungsten oxide-based composites, along with related charge-storage mechanisms and their electrochemical performances in SCs and batteries, is systematically summarized. Finally, remarks are made on future research challenges and the prospect of using tungsten oxide-based materials to further upgrade energy-storage devices.