Interplay of Na Substitution in Magnetic Interaction and Photocatalytic Properties of Ca1-xNaxTi0.5Ta0.5O3 Perovskite Nanoparticles

This research paper delves into the enhancement of wastewater treatment through the design and synthesis of advanced photocatalytic materials, focusing on the effects of sodium (Na) substitution in Ca1-xNaxTa0.5Ti0.5O3 perovskites. By employing various analytical techniques such as X-ray diffraction, Field Emission Scanning Electron Microscopy, Transmission Electron Microscopy and UV-vis spectroscopy, the study examines the transition of these perovskites from tetragonal to orthorhombic structures and observes a reduction in Ca content with Na substitution, which also favors the cubic phase formation and inhibits secondary phases. Significantly, magnetic property analysis uncovers an unexpected ferromagnetic ordering in these perovskites, including compositions traditionally viewed as non-magnetic. The photocatalytic tests reveal a significant improvement in degrading Rhodamine B dye under visible light, particularly in samples with higher Na levels, attributed to enhanced light absorption and efficient electron processes. The study highlights the optimal Na substitution level for peak photocatalytic performance, offering valuable insights into the complex interplay between structural, magnetic, and photocatalytic properties of these perovskites, and their potential in various applications, thereby contributing to the advancement of wastewater treatment technologies.

Transfer, transportation, and adsorption of UV-B by Mg-N co doped carbon quantum dots: Response of growth indicators, antioxidant effect and mechanism explanation

Mg and N co-doped carbon quantum dots (Mg-N-CQDs) were synthesized and applied to alleviate oxygen toxicity by UV-B radiation and enhance antioxidative responses to wheat seedlings. It showed that Mg-N-CQDs pre-treatment attenuated the UV-B stress effects in a dose-dependent manner, as indicated by enhancing the characteristics of seed germination and early seedling growth parameters. Meanwhile, Mg-N-CQDs can be applied in plant nutrient solutions with nitrogen, phosphorus, potassium, and other fertilizers to promote the growth of seedlings. Furthermore, efficient antioxidant systems, chlorophyll content, and stability of fluorescence intensity were activated by Mg-N-CQDs pre-treatment, which effectively increased the activities of superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD), and eliminate the contents of malondialdehyde (MDA) and hydrogen peroxide, and the production rate of superoxide anion radical in the roots and germs, thereby preventing oxidative damage from UV-B stress. Notably, Mg-N-CQDs pre-treatment significantly increased the expression of related genes to improve the antioxidant capacity of roots and germs, resulting in an increased level of ATPS, CS, and GS. The mechanism study indicated that amino and hydroxyl groups and Mg, N modified CQDs could broaden the light absorption range of CQDs and improve the ability to convert blue light and ultraviolet rays to visible light, which was the main reason why Mg-N-CQDs could relieve wheat seedlings from ultraviolet stress. Therefore, Mg-N-CQDs could serve as a regulator to reduce the damage of UV-B, laying the foundation for their application in environmental protection and agricultural production.

Piezoelectric catalytic, photocatalytic and adsorption capability and selectivity removal of various dyes and mixed dye wastewater by ZnO nanoparticles

The C-O functional group decorated ZnO nanoparticles with high UV absorption and VIS/NIR reflectance were synthesized by a simple wet chemistry method using various chelating agents. This study attempts to explore the internal mechanism of the piezoelectric catalytic activity, photocatalytic activity and adsorption performance of ZnO nanoparticles. The phase purity, particle size, optical band gap and photocatalytic activity of ZnO nanoparticles showed strong chelating agent - dependent behavior. The ZnO nanoparticles prepared by using EDTA as a chelating agent exhibits smallest particle size, highest photocatalytic activity for the degradation of methyl orange, methylene blue and rhodamine B, high adsorption capacity for the adsorption of Congo red and high vibration-catalytic performance for the vibration degradation of rhodamine B. The synergies mechanism among piezoelectric catalysis, photocatalysis and adsorption capacity of ZnO nanoparticles are discussed on the basis of the experimental results.

SrSnO3-Assembled MWCNT Heterojunctions for Superior Hydrogen Production under Visible Light

A one-step sol-gel method for SrSnO3 nanoparticle synthesis and the incorporation of multi-walled carbon nanotubes (MWCNTs) to produce a SrSnO3@MWCNT photocatalyst is presented. The incorporation of MWCNTs results in enhancement of structural, optical, and optoelectrical properties of SrSnO3. The optimized 3.0% addition of MWCNTs results in light absorption enhancement and a reduction of the band gap from 3.68 to 2.85 eV. Upon application of the photocatalyst in the photocatalytic hydrogen production reaction, SrSnO3@MWCNT-3.0% yields 4200 μmol g-1 of H2 in just 9 h with the use of 1.6 g L-1 of the photocatalyst. SrSnO3@MWCNT exhibits remarkable chemical and photocatalytic stability upon regeneration. Enhanced photocatalytic ability is attributed to improved surface properties and charge-carrier recombination suppression induced by the MWCNT addition. This study highlights the remarkable improvements in chemical and physical properties of semiconductors with MWCNT incorporation.

In Situ Construction of CNT/CuS Hybrids and Their Application in Photodegradation for Removing Organic Dyes

Herein, a coprecipitation method used to synthesize CuS nanostructures is reported. By varying the reaction time and temperature, the evolution of the CuS morphology between nanoparticles and nanoflakes was investigated. It was found that CuS easily crystallizes into sphere-/ellipsoid-like nanoparticles within a short reaction time (0.5 h) or at a high reaction temperature (120 °C), whereas CuS nanoflakes are readily formed at a low reaction temperature (20 °C) for a long time (12 h). Photodegradation experiments demonstrate that CuS nanoflakes exhibit a higher photodegradation performance than CuS nanoparticles for removing rhodamine B (RhB) from aqueous solution under simulated sunlight irradiation. Carbon nanotubes (CNTs) were further used to modify the photodegradation performance of a CuS photocatalyst. To achieve this aim, CNTs and CuS were integrated to form CNT/CuS hybrid composites via an in situ coprecipitation method. In the in situ constructed CNT/CuS composites, CuS is preferably formed as nanoparticles, but cannot be crystallized into nanoflakes. Compared to bare CuS, the CNT/CuS composites manifest an obviously enhanced photodegradation of RhB; notably, the 3% CNT/CuS composite with CNT content of 3% showed the highest photodegradation performance (η = 89.4% for 120 min reaction, kapp = 0.01782 min-1). To make a comparison, CuS nanoflakes and CNTs were mechanically mixed in absolute alcohol and then dried to obtain the 3% CNT/CuS-MD composite. It was observed that the 3% CNT/CuS-MD composite exhibited a slightly higher photodegradation performance (η = 92.4%, kapp = 0.0208 min-1) than the 3% CNT/CuS composite, which may be attributed to the fact that CuS maintains the morphology of nanoflakes in the 3% CNT/CuS-MD composite. The underlying enhanced photocatalytic mechanism of the CNT/CuS composites was systematically investigated and discussed.

Enhanced photocatalytic performance by hybridization of Bi2WO6 nanoparticles with honeycomb-like porous carbon skeleton

In this work, we have assembled Bi₂WO₆ nanoparticles on the surface of honeycomb-like porous carbon skeleton (PCS) via a hydrothermal route to achieve a new type of PCS@Bi₂WO₆ hybrid composite photocatalysts. The PCS@Bi₂WO₆ hybrid structures are determined by SEM, TEM and XPS characterizations. UV-vis DRS investigation suggests an enhanced visible-light absorption of the PCS@Bi₂WO₆ composites. Transient photocurrent response, EIS and PL spectroscopy characterizations demonstrate that the composites exhibit an efficient separation of photoproduced electron/hole pairs. The photocatalytic performance of the composites were evaluated by using RhB as the model pollutant and simulated sunlight as the light source. It is revealed that the PCS@Bi₂WO₆ hybrid composites manifest much enhanced photocatalytic performance. The 5 wt%PCS@Bi₂WO₆ composite manifests the highest photocatalytic activity, which is ca. 2.1 times as large as that of bare Bi₂WO₆ nanoparticles. This can be mainly ascribed to two factors: (1) The photogenerated electron/hole pairs in Bi₂WO₆ are efficiently separated due to the electron transfer between Bi₂WO₆ and PCS; and (2) PCS induces enhanced visible-light absorption and the visible-light-excited electrons in PCS could also take part in the photocatalytic reactions.

Direct Z-scheme CaTiO3@BiOBr composite photocatalysts with enhanced photodegradation of dyes

To efficiently separate photoexcited electron/hole pairs is one of the key points for achieving excellent photocatalysts with high photocatalytic performances. To achieve this aim, here we have assembled CaTiO₃ (CTO) nanoparticles onto BiOBr microplates, thus constructing novel Z-scheme CTO@BiOBr heterojunction composite photocatalysts. Observation by scanning/transmission electron microscopy confirms the good decoration of CTO nanoparticles (15-50 nm) on the surface of BiOBr microplates (diameter 0.7-2.2 μm, thickness 70-110 nm). Simulated sunlight was used as the light source, and rhodamine B (RhB) in aqueous solution was used as the model pollutant to assess the photodegradation activity of the samples. It is demonstrated that the CTO@BiOBr composites with an appropriate CTO content exhibit much enhanced photodegradation performances. In particular, the 10%CTO@BiOBr composite with a CTO mass fraction of 10%, which photocatalyzes 99.9% degradation of RhB at 30 min of photocatalysis, has a photocatalytic activity which is about 1.8 and 23.6 times larger than that of bare BiOBr microplates and CTO nanoparticles, respectively. This can be explained as the result of the Z-scheme electron transfer and efficient separation of photoexcited electron/hole pairs, as evidenced by photoluminescence, photocurrent response, and electrochemical impedance spectroscopy investigations.

NaBH4-Reduction Induced Evolution of Bi Nanoparticles from BiOCl Nanoplates and Construction of Promising Bi@BiOCl Hybrid Photocatalysts

In this work, we have synthesized BiOCl nanoplates (diameter 140–220 nm, thickness 60–70 nm) via a co-precipitation method, and then created Bi nanoparticles (diameter 35–50 nm) on the surface of BiOCl nanoplates via a NaBH4 reduction method. By varying the NaBH4 concentration and reaction time, the evolution of Bi nanoparticles was systematically investigated. It is demonstrated that with increasing the NaBH4 concentration (at a fixing reaction time of 30 min), BiOCl crystals are gradually reduced into Bi nanoparticles, and pure Bi nanoparticles are formed at 120 mM NaBH4 solution treatment. At low-concentration NaBH4 solutions (e.g., 10 and 30 mM), with increasing the reaction time, BiOCl crystals are partially reduced into Bi nanoparticles, and then the Bi nanoparticles return to form BiOCl crystals. At high-concentration NaBH4 solutions (e.g., 120 mM), BiOCl crystals are reduced to Bi nanoparticles completely with a short reaction time, and further prolong the treatment time leads to the transformation of the Bi nanoparticles into a two-phase mixture of BiOCl and Bi2O3 nanowires. The photodegradation performances of the samples were investigated by choosing rhodamine B (RhB) as the model pollutant and using simulated sunlight as the light source. It is demonstrated that an enhanced photodegradation performance can be achieved for the created Bi@BiOCl hybrid composites with appropriate NaBH4 treatment. The underlying photocatalytic mechanism was systematically investigated and discussed.

Construction of a CQDs/Ag3PO4/BiPO4 Heterostructure Photocatalyst with Enhanced Photocatalytic Degradation of Rhodamine B under Simulated Solar Irradiation

A carbon quantum dot (CQDs)/Ag₃PO₄/BiPO₄ heterostructure photocatalyst was constructed by a simple hydrothermal synthesis method. The as-prepared CQDs/Ag₃PO₄/BiPO₄ photocatalyst has been characterized in detail by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet–visible spectroscopy, and photoelectrochemical measurements. It is demonstrated that the CQDs/Ag₃PO₄/BiPO₄ composite is constructed by assembling Ag₃PO₄ fine particles and CQDs on the surface of rice-like BiPO₄ granules. The CQDs/Ag₃PO₄/BiPO₄ heterostructure photocatalyst exhibits a higher photocatalytic activity for the degradation of the rhodamine B dye than that of Ag₃PO₄, BiPO₄, and Ag₃PO₄/BiPO₄. The synergistic effects of light absorption capacity, band edge position, separation, and utilization efficiency of photogenerated carriers play the key role for the enhanced photodegradation of the rhodamine B dye.

Enhanced Photocatalytic Performance and Mechanism of Au@CaTiO3 Composites with Au Nanoparticles Assembled on CaTiO3 Nanocuboids

Using P25 as the titanium source and based on a hydrothermal route, we have synthesized CaTiO₃ nanocuboids (NCs) with the width of 0.3–0.5 μm and length of 0.8–1.1 μm, and systematically investigated their growth process. Au nanoparticles (NPs) of 3–7 nm in size were assembled on the surface of CaTiO₃ NCs via a photocatalytic reduction method to achieve excellent Au@CaTiO₃ composite photocatalysts. Various techniques were used to characterize the as-prepared samples, including X-ray powder diffraction (XRD), scanning/transmission electron microscopy (SEM/TEM), diffuse reflectance spectroscopy (UV-vis DRS), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). Rhodamine B (RhB) in aqueous solution was chosen as the model pollutant to assess the photocatalytic performance of the samples separately under simulated-sunlight, ultraviolet (UV) and visible-light irradiation. Under irradiation of all kinds of light sources, the Au@CaTiO₃ composites, particularly the 4.3%Au@CaTiO₃ composite, exhibit greatly enhanced photocatalytic performance when compared with bare CaTiO₃ NCs. The main roles of Au NPs in the enhanced photocatalytic mechanism of the Au@CaTiO₃ composites manifest in the following aspects: (1) Au NPs act as excellent electron sinks to capture the photoexcited electrons in CaTiO₃, thus leading to an efficient separation of photoexcited electron/hole pairs in CaTiO₃; (2) the electromagnetic field caused by localized surface plasmon resonance (LSPR) of Au NPs could facilitate the generation and separation of electron/hole pairs in CaTiO₃; and (3) the LSPR-induced electrons in Au NPs could take part in the photocatalytic reactions.

Photocatalytic and Photo-Fenton Catalytic Degradation Activities of Z-Scheme Ag₂S/BiFeO₃ Heterojunction Composites under Visible-Light Irradiation

Z-scheme Ag₂S/BiFeO₃ heterojunction composites were successfully prepared through a precipitation method. The morphology and microstructure characterization demonstrate that Ag₂S nanoparticles (30⁻50 nm) are well-decorated on the surfaces of polyhedral BiFeO₃ particles (500⁻800 nm) to form Ag₂S/BiFeO₃ heterojunctions. The photocatalytic and photo-Fenton catalytic activities of the as-derived Ag₂S/BiFeO₃ heterojunction composites were evaluated by the degradation of methyl orange (MO) under visible-light irradiation. The photocatalytic result indicates that the Ag₂S/BiFeO₃ composites exhibit much improved photocatalytic activities when compared with bare Ag₂S and BiFeO₃. The optimum composite sample was observed to be 15% Ag₂S/BiFeO₃ with an Ag₂S mass fraction of 15%. Furthermore, the addition of H₂O₂ can further enhance the dye degradation efficiency, which is due to the synergistic effects of photo- and Fenton catalysis. The results of photoelectrochemical and photoluminescence measurements suggest a greater separation of the photoexcited electron/hole pairs in the Ag₂S/BiFeO₃ composites. According to the active species trapping experiments, the photocatalytic and photo-Fenton catalytic mechanisms of the Ag₂S/BiFeO₃ composites were proposed and discussed.

Growth Process and CQDs-modified Bi₄Ti₃O12 Square Plates with Enhanced Photocatalytic Performance

Bi₄Ti₃O12 square plates were synthesized via a hydrothermal route, and their growth process was systematically investigated. Carbon quantum dots (CQDs) were prepared using glucose as the carbon source, which were then assembled on the surface of Bi₄Ti₃O12 square plates via a hydrothermal route with the aim of enhancing the photocatalytic performance. XRD (X-ray powder diffraction), SEM (scanning electron microscopy), TEM (transmission electron microscopy), UV-vis DRS (diffuse reflectance spectroscopy), XPS (X-ray photoelectron spectroscopy), FTIR (Fourier transform infrared spectroscopy), PL (photoluminescence) spectroscopy, EIS (electrochemical impedance spectroscopy) and photocurrent spectroscopy were used to systematically characterize the as-prepared samples. It is demonstrated that the decoration of CQDs on Bi₄Ti₃O12 plates leads to an increased visible light absorption, slightly increased bandgap, increased photocurrent density, decreased charge-transfer resistance, and decreased PL intensity. Simulated sunlight and visible light were separately used as a light source to evaluate the photocatalytic activity of the samples toward the degradation of RhB in aqueous solution. Under both simulated sunlight and visible light irradiation, CQDs@Bi₄Ti₃O12 composites with an appropriate amount of CQDs exhibit obviously enhanced photocatalytic performance. However, the decoration of excessive CQDs gives rise to a decrease in the photocatalytic activity. The enhanced photocatalytic activity of CQDs-modified Bi₄Ti₃O12 can be attributed to the following reasons: (1) The electron transfer between Bi₄Ti₃O12 and CQDs promotes an efficient separation of photogenerated electron/hole pairs in Bi₄Ti₃O12; (2) the up-conversion photoluminescence emitted from CQDs could induce the generation of additional electron/hole pairs in Bi₄Ti₃O12; and (3) the photoexcited electrons in CQDs could participate in the photocatalytic reactions.