Aqueous Cellulose Solution Adhesive

In the context of sustainable development, research on a biomass-based adhesive without chemical modification as a substitute for petroleum-based adhesive is now crucial. It turns out to be challenging to guarantee a simple and sustainable method to produce high-quality adhesives and subsequently manufacture multifunctional composites. Herein, the inherent properties of cellulose were exploited to generate an adhesive based on a cellulose aqueous solution. The adhesion is simple to prepare structurally and functionally complex materials in a single process. Cellulose-based daily necessities including straws, bags, and cups were prepared by adhering cellulose films, and smart devices like actuators and supercapacitors assembled by adhering hydrogels were also demonstrated. In addition, the composite boards bonded with natural biomass wastes, such as wood chips, displayed significantly stronger mechanical properties than the natural wood or commercial composite boards. Cellulose aqueous adhesives provide a straightforward, feasible, renewable, and inventive bonding technique for material shaping and the creation of multipurpose devices.

Study of Cellulose Dissolution in ZnO/NaOH/Water Solvent Solution and Its Temperature-Dependent Effect Using Molecular Dynamics Simulation

Cellulose is a biopolymer with numerous advantages that make it an ecological, economical, and high-performing choice for various applications. To fully exploit the potential of cellulose, it is often necessary to dissolve it, which poses a current challenge. The aqueous zinc oxide/sodium hydroxide (ZnO/NaOH/Water) system is a preferred solvent for its rapid dissolution, non-toxicity, low cost, and environmentally friendly nature. In this context, the behavior of cellulose chains in the aqueous solution of ZnO/NaOH and the impact of temperature on the solubility of this polymer were examined through a molecular dynamics simulation. The analysis of the root means square deviation (RMSD), interaction energy, hydrogen bond curves, and radial distribution function revealed that cellulose is insoluble in the ZnO/NaOH solvent at room temperature (T = 298 K). Decreasing the temperature in the range of 273 K to 268 K led to a geometric deformation of cellulose chains, accompanied by a decrease in the number of interchain hydrogen bonds over the simulation time, thus confirming the solubility of cellulose in this system between T = 273 K and T = 268 K.

Regenerated cellulose/polyvinyl alcohol composite films with high transparency and ultrahigh haze for multifunctional light management

In this study, cellulose composite films (CCFs) were fabricated through controllable dissolution and regeneration process of cellulose with the addition of polyvinyl alcohol (PVA). The competition of hydrogen bond site between cellulose and PVA led to partial dissolution of cellulose and maintained morphology of micron fibers with width range from 14.55 to 16.16 μm, which served as in-situ visible light scatterers. With this unique micron structure, the obtained CCF exhibited high transparency up to 90.5 % at 550 nm and ultrahigh haze up to 96 %. Interestingly, CCF could be used as hazy and flexible substrate, such as scattering lamp covers for indoor light management, anti-glare screen protectors and anti-reflection layers of solar cell devices. Among them, the efficiency of the solar cell device could be improved by 10.38 % with the help of a low-cost, excellent-performance CCF.

MXene-Mediated Cellulose Conductive Hydrogel with Ultrastretchability and Self-Healing Ability

Constructing natural polymers such as cellulose, chitin, and chitosan into hydrogels with excellent stretchability and self-healing properties can greatly expand their applications but remains very challenging. Generally, the polysaccharide-based hydrogels have suffered from the trade-off between stiffness of the polysaccharide and stretchability due to the inherent nature. Thus, polysaccharide-based hydrogels (polysaccharides act as the matrix) with self-healing properties and excellent stretchability are scarcely reported. Here, a solvent-assisted strategy was developed to construct MXene-mediated cellulose conductive hydrogels with excellent stretchability (∼5300%) and self-healability. MXene (an emerging two-dimensional nanomaterial) was introduced as emerging noncovalent cross-linking sites between the solvated cellulose chains in a benzyltrimethylammonium hydroxide aqueous solution. The electrostatic interaction between the cellulose chains and terminal functional groups (O, OH, F) of MXene led to cross-linking of the cellulose chains by MXene to form a hydrogel. Due to the excellent properties of the cellulose-MXene conductive hydrogel, the work not only enabled their strong potential in both fields of electronic skins and energy storage but provided fresh ideas for some other stubborn polymers such as chitin to prepare hydrogels with excellent properties.

Rationally designed cellulose hydrogel for an ultrasensitive pressure sensor

Flexible pressure sensors with high sensitivity are required in fields such as human-machine interactions, electronic skin, and health tracking. In this work, we reported cellulose ion-conductive hydrogel (ICH) rationally designed from both nano and micron perspectives for ultrasensitive pressure sensors, via a zero-waste approach, without involving soft components. By introducing low molecular weight cellulose and using the idea of a rough surface, the piezocapacitive sensitivity of the ICH was increased from 0.04 kPa-1 to 89.81 kPa-1 in increments of 2245, which also has a high degree of transparency, excellent durability, and good electrical transmission. Moreover, the ICH demonstrated great potential as sensors and arrays practicable in various industries, including medical treatment and motion recognition. The design is also applicable for piezoresistive tactile sensors, which realize enhanced sensitivity. This affordable, effective, and environmentally friendly technology definitely offers novel perspectives and the potential to enhance the functionality of flexible pressure sensors.

Investigation of cellulose dissolution in morpholinium-based solvents: impact of solvent structural features on cellulose dissolution

A series of N-methylmorpholinium salts with varying N-alkyl chains and Cl-, OAc- and OH- as counter ions have been synthesized and investigated for their ability to dissolve cellulose, aiming at elucidating solvent structural features affecting cellulose dissolution. Synthesis procedures have been developed to, to a high extent, rely on conversions in water and microwave-assisted reactions employing a reduced number of work-up steps and ion-exchange resins that can be regenerated. Water solutions of morpholinium hydroxides proved capable of dissolving cellulose, with those of them possessing alkyl chains longer than ethyl showing surprising dissolution ability at room-temperature. Morpholinium acetates behaved as ionic liquids, and were also capable of dissolving cellulose when combined with DMSO. The obtained cellulose solutions were characterized according to their chemical and colloidal stability using 13C NMR spectroscopy, size exclusion chromatography and flow sweep measurements, while the ethanol coagulates were investigated in terms of crystallinity using solid state NMR. In contrast, the morpholinium chlorides obtained were hygroscopic with high melting points and low solubility in common organic solvents e.g., acetone, DMSO and DMAc, thus lacking the ability to swell or dissolve cellulose.

The thermodynamics of enhanced dope stability of cellulose solution in NaOH solution by urea

The addition of urea in pre-cooled alkali aqueous solution is known to improve the dope stability of cellulose solution. However, its thermodynamic mechanism at a molecular level is not fully understood yet. By using molecular dynamics simulation of an aqueous NaOH/urea/cellulose system using an empirical force field, we found that urea was concentrated in the first solvation shell of the cellulose chain stabilized mainly by dispersion interaction. When adding a glucan chain into the solution, the total solvent entropy reduction is smaller if urea is present. Each urea molecule expelled an average of 2.3 water molecules away from the cellulose surface, releasing water entropy that over-compensates the entropy loss of urea and thus maximizing the total entropy. Scaling the Lennard-Jones parameter and atomistic partial charge of urea revealed that direct urea/cellulose interaction was also driven by dispersion energy. The mixing of urea solution and cellulose solution in the presence or absence of NaOH are both exothermic even after correcting for the contribution from dilution.

In situ monitoring of cellulose etherification in solution: probing the impact of solvent composition on the synthesis of 3-allyloxy-2-hydroxypropyl-cellulose in aqueous hydroxide systems

Cellulose etherification can be affected by tuning the solvent composition as indicated by monitoring the reaction using in situ IR spectroscopy and rheology measurements together with NMR characterisation.

Facile one-step fabrication of all cellulose composites with unique optical performance from wood and bamboo pulp

Cellulosic substrates completely originating from biomass have gained increasing attention for utilization in photoelectric devices due to their biodegradability, sustainability, and renewability. Herein, a simple one-step strategy was used to fabricate transparent (84.2%-90% at 550 nm) all-cellulose composites (ACCs) with customized optical haze (14.7%-83.7% at 550 nm) from wood and bamboo pulp due to their variable solubility. Surface roughness, coagulation bath composition, and the size of the undissolved cellulose fibers contributed to optical haze regulation. Fabricated ACCs demonstrated water resistance, thermal stability, and good mechanical properties. Moreover, an enhancement in the power conversion efficiency of a perovskite solar cell was achieved by simple attachment. Compared with non-sustainable petroleum base materials, ACCs exhibit biodegradability and renewability, which makes the composites promising in large-scale production and various applications due to their tunable haze.

Scattering studies of the size and structure of cellulose dissolved in aqueous hydroxide base solvents

Combining NaOH with other hydroxide bases with superior dissolution properties can be a means of improving dissolution of cellulose. However, this raises questions about how the size and structure of cellulose vary when dissolved in different hydroxide bases. Here, cellulose in aqueous solutions of NaOH, Tetramethylammonium hydroxide (TMAH), Benzyltrimethylammonium hydroxide (Triton B) and previously studied equimolar solutions of NaOH/TMAH and NaOH/Triton B were investigated using small angle X-ray scattering, static and dynamic light scattering. The results show that cellulose in NaOH(aq) is largely aggregated and that the more hydrophobic TMAH and Triton are capable of molecularly dissolving cellulose into worm-like conformations, stiffer than in NaOH. The dissolution properties of mixtures are highly dependent on the compatibility of the individual bases; in line with previous observations of the properties of the solutions which now could be correlated to the structure of the cellulose on a nano- and microscale.

Flexible, anti-freezing self-charging power system composed of cellulose based supercapacitor and triboelectric nanogenerator

A self-charging power system composed of cellulose organohydrogel based supercapacitor and triboelectric nanogenerator is constructed in the present work. Cellulose organohydrogels with flexibility, optical transparency, conductivity and excellent low temperature tolerance are fabricated via a dissolution and regeneration process. The optical transmittance, elongation at break, and conductivity of the cellulose organohydrogel reach 93%, 242%, and 1.92 S/m, as well as excellent anti-freezing property down to -54.3 °C, potential as flexible conductive device in harsh conditions. When demonstrated as energy storage device, the cellulose organohydrogel based supercapacitor demonstrates excellent supercapacitor performances, durability against deformation and resistance to low temperature. When demonstrated as energy harvesting device, the cellulose organohydrogel based triboelectric nanogenerator displays stability, and resistance to both low temperature and a large number of operation cycles. As the cellulose based triboelectric nanogenerator is integrated with cellulose based supercapacitor, a flexible and anti-freezing self-charging power system is built, capable of driving miniaturized electronics, demonstrating great potential as wearable power system in harsh conditions.

Recent Progress in High-Strength and Robust Regenerated Cellulose Materials

High-strength petroleum-based materials like plastics have been widely used in various fields, but their nonbiodegradability has caused serious pollution problems. Cellulose, as the most abundant sustainable polymer, has a great chance to act as the ideal substitute for plastics due to its low cost, wide availability, biodegradability, etc. Herein, the recent achievements for developing cellulose "green" solvents and regenerated cellulose materials with high strength via the "bottom-up" route are presented. Cellulose can be regenerated to produce films/membranes, hydrogels/aerogels, filaments/fibers, microspheres/beads, bioplastics, etc., which show potential applications in textiles, biomedicine, energy storage, packaging, etc. Importantly, these cellulose-based materials can be biodegraded in soil and oceans, reducing environmental pollution. The cellulose solvents, dissolving mechanism, and strategies for constructing the regenerated cellulose functional materials with high strength and performances, together with the current achievements and urgent challenges are summarized, and some perspectives are also proposed. The near future will be an exciting era for high-strength biodegradable and renewable materials. The hope is that many environmentally friendly materials with good properties and low cost will be produced for commercial use, which will be beneficial for sustainable development in the world.

Dissolution and Interaction of Cellulose Carbamate in NaOH/ZnO Aqueous Solutions

The dissolution and molecular interactions of cellulose carbamate (CC) in NaOH/ZnO aqueous solutions were studied using optical microscopy, differential scanning calorimetry (DSC), ¹H NMR, dynamic light scattering (DLS), atomic force microscopy (AFM), transmission electron microscopy (TEM), and molecular dynamic simulation. The dissolution of CC in NaOH/ZnO aqueous solutions using the freezing–thawing method was an exothermic process, and the lower temperature was favorable for the dissolution of CC. ZnO dissolved in NaOH aqueous solutions with the formation of Zn(OH)₄²⁻, and no free Zn²⁺ ions existed in the solvents. NaOH/Na₂Zn(OH)₄ system formed strong interactions with the hydroxyl groups of CC to improve its solubility and the stability of CC solution. The results indicate that 7 wt% NaOH/1.6 wt% ZnO aqueous solution was the most appropriate solvent for the dissolution of CC. This work revealed the dissolution interaction of CC-NaOH/ZnO solutions, which is beneficial for the industrialization of the CarbaCell process.

Hydrophobic interactions control the self-assembly of DNA and cellulose

Desoxyribosenucleic acid, DNA, and cellulose molecules self-assemble in aqueous systems. This aggregation is the basis of the important functions of these biological macromolecules. Both DNA and cellulose have significant polar and nonpolar parts and there is a delicate balance between hydrophilic and hydrophobic interactions. The hydrophilic interactions related to net charges have been thoroughly studied and are well understood. On the other hand, the detailed roles of hydrogen bonding and hydrophobic interactions have remained controversial. It is found that the contributions of hydrophobic interactions in driving important processes, like the double-helix formation of DNA and the aqueous dissolution of cellulose, are dominating whereas the net contribution from hydrogen bonding is small. In reviewing the roles of different interactions for DNA and cellulose it is useful to compare with the self-assembly features of surfactants, the simplest case of amphiphilic molecules. Pertinent information on the amphiphilic character of cellulose and DNA can be obtained from the association with surfactants, as well as on modifying the hydrophobic interactions by additives.

Engineering of sustainable biomaterial composites from cellulose and silk fibroin: Fundamentals and applications

This review addresses composites prepared from cellulose (Cel) and silk fibroin (SF) to generate multifunctional, biocompatible, biodegradable materials such as fibers, films and scaffolds for tissue engineering. First, we discuss briefly the molecular structures of Cel and SF. Their structural features explain why certain solvents, e.g., ionic liquids, inorganic electrolyte solutions dissolve both biopolymers. We discuss the mechanisms of Cel dissolution because in many cases they also apply to (much less studied) SF dissolution. Subsequently, we discuss the fabrication and characterization of Cel/SF composite biomaterials. We show how the composition of these materials beneficially affects their mechanical properties, compared to those of the precursor biopolymers. We also show that Cel/SF materials are excellent and versatile candidates for biomedical applications because of the inherent biocompatibility of their components.

Effect of the cation structure on cellulose dissolution in aqueous solutions of organic onium hydroxides

The solubility of cellulose was systematically assessed in organic onium/inium hydroxide aqueous solutions (OHAS) having assorted cations, such as phosphonium, ammonium, piperidinium, morpholinium, pyrrolidinium, and cholinium. From a dissolution test of cellulose in OHAS, it was confirmed that the single most important factor in the dissolution is the high concentration of OHAS. In addition, having a weaker hydrogen bond network around OH and H2O was found to be important to facilitate the cellulose dissolution. In NMR analysis, the OHAS with an excellent cellulose solubility, such as tetrabutylphosphonium hydroxide ([P4444]OH), exhibited a chemical shift of water (δH2O) integrated with that of OH in the low frequency region (∼4.9 ppm), while choline hydroxide ([Ch]OH) with poor cellulose solubility showed δH2O higher than 5.2 ppm. A higher δH2O means that the protons are deshielded due to a stronger hydrogen bond network around H2O and OH, which indicates a strong self-associating property of OHAS that is unfavourable for the cellulose dissolution. Assuming that the strong self-associating property can be reduced by improving the hydrophobicity of organic cations, the methyl group in N-butyl-N-methylmorpholinium hydroxide ([Mor14]OH) was replaced by a butyl chain to shield the positive charge. While [Mor14]OH dissolved only 5 wt% of cellulose, the solubility in the synthesised OHAS, N,N-dibutylmorpholinium hydroxide ([Mor44]OH), was successfully improved to 20 wt%. In the present paper, cellulose solubility was also analysed in relation to the Kamlet-Taft parameters.

Probing Interactions in Combined Hydroxide Base Solvents for Improving Dissolution of Cellulose

To further understand cellulose-solvent interactions in aqueous hydroxide solutions, cellulose behavior in aqueous solutions of NaOH combined with tetramethylammonium hydroxide (TMAH) or benzyltrimethylammonium hydroxide (Triton B), as well as urea, was investigated. The rheological properties of the solutions were assessed through flow sweeps at different temperatures, and the intermolecular interactions were probed using solvatochromic dyes. The results showed that NaOH combined with TMAH had synergistic effects on cellulose dissolution and was a better solvent for cellulose than the combination of NaOH with Triton B, in spite of the superior dissolution ability of Triton B alone. This somewhat unexpected finding shows that the base pair needs to be selected with care. Interestingly, addition of urea had no significant effect on the solvatochromic parameters or dissolution capacity of solutions of Triton B but rendered improved stability of solutions containing NaOH and/or TMAH. It seems that both urea and Triton B weaken the hydrophobic assembly effect of these solutions, but urea is excluded from interacting with cellulose in the presence of Triton B. This study provides further insight into dissolution of cellulose and the possibility of utilizing combinations of hydroxide bases to achieve improved solution properties.

Flexible and Transparent Cellulose-Based Ionic Film as a Humidity Sensor

A transparent and flexible cellulose/KOH composite ionic film (CKF) is fabricated as a humidity sensor. CKF exhibits high optical transmittance (87.14% at 550 nm), which has rarely been reported among humidity sensors as a result of the small pore size of the cellulose matrix caused by water-evaporation-induced dense packing and uniform distribution of amorphous KOH via simply soaking-drying. CKF also possesses flexibility and robust mechanical property. The conductive CKF shows fast and reversible real-time response to relative humidity (RH) in the 11.3-97.3% RH range with conductance varying over 200 times, response/recovery times of 6.0/10.8 s, which are shorter than the majority of the reported values, as well as a hysteresis error of 0.57%, which is significantly less than that reported in the literature. Furthermore, CKF is insensitive to both the temperature (10-70 °C) and pressure (0-120 kPa), indicating high selectivity as humidity sensors. In both the non-contact fingertip moisture detection and breathing rate detection, the flexible and transparent CKF-based humidity sensor responds favorably to RH change. Moreover, a flexible and transparent CKF-based wearable skin moisture detector is assembled to measure the moisture of human skin in different situations, whose measurement is very close to the commercial detector. The results offer real-time moisture information on human skin and demonstrate the potential of a CKF-based moisture detector as a promising modular component in integrated intelligent wearable equipment.

The role of urea in the solubility of cellulose in aqueous quaternary ammonium hydroxide

We examine the role of water and urea in cellulose solubility in tetrabutylammonium hydroxide (TBAH). Molecular dynamics simulations were performed for several different solvent compositions with a fixed cellulose fraction. For each composition, two simulations were carried out with cellulose fixed in each of the crystalline and the dissolved states. From the enthalpy and the entropy of the two states, the difference in Gibbs free energy (ΔG) and hence the spontaneity is determined. A comparison with solubility experiments showed a strong correlation between the calculated ΔG and the experimental measurements. A breakdown of the enthalpic and entropic contributions reveals the roles of water and urea in solubility. At high water concentration, a drop in solubility is attributed to both increased enthalpy and decreased entropy of dissolution. Water displaces strong IL–cellulose interactions for weaker water–cellulose interactions, resulting in an overall enthalpy increase. This is accompanied by a strong decrease in entropy, which is primarily attributed to both water and the entropy of mixing. Adding urea to TBAH(aq) increases solubility by an addition to the mixing term and by reducing losses in solvent entropy upon dissolution. In the absence of urea, the flexible [TBA]⁺ ions lose substantial degrees of freedom when they interact with cellulose. When urea is present, it partially replaces [TBA]⁺ and to a lesser extent OH⁻ near cellulose, losing less entropy because of its rigid structure. This suggests that one way to boost the dissolving power of an ionic liquid is to limit the number of degrees of freedom from the outset.

We examine the role of water and urea in cellulose solubility in tetrabutylammonium hydroxide (TBAH).

Transparent, Antifreezing, Ionic Conductive Cellulose Hydrogel with Stable Sensitivity at Subzero Temperature

Cellulose was dissolved in benzyltrimethyl ammonium hydroxide (BzMe₃NOH) aqueous solution, and ionic conductive cellulose hydrogels (CCHs) with antifreezing property were directly fabricated by chemical cross-linking, without further treatment. The concentrated BzMe₃NOH solution in the CCH matrix endowed the hydrogel with transparency, ionic conductivity, and freeze tolerance. CCH maintained transparency over 90% and stable mechanical properties in the temperatures from -27.8 to 62.1 °C. Furthermore, the CCH-based sensors exhibited stable sensitivity to tensile strain, compressive pressure, and temperature, in a wide temperature range including the subzero temperature, with a fast responding time and no obvious hysteresis. The present work is expected to provide a simple and sustainable pathway to prepare an antifreezing soft conductor with multifunctions based on cellulose, which enables a broad range of potential applications.

Construction of cellulose-based Pickering stabilizer as a novel interfacial antioxidant: A bioinspired oxygen protection strategy

Oxygen protection/isolation is imperative to prevent the lipid oxidation since oxygen molecule is an ultimate quencher in photon conversion process. Inspired by the structural buildup of seeds from oil crops, a sustainable solid particle stabilizer with novel antioxidant activity was prepared by using cellulose and polyphenol. In this work, bacterial cellulose (BC) nanofibrils modified by tea polyphenols (TPs) was prepared and used as Pickering emulsifier for the O/W emulsion. BC nanofibirls exhibited excellent adsorption capacity up to 55 μg/mg, and the adsorption kinetics between BC and TPs were further investigated. After modification, the interfacial diffusion rate constant of BC was significantly increased to from 0.43 to 1.21 mN m^-1 s^-0.5. Moreover, the obtained O/W interfacial modulus of the dilatational elasticity was increased from 58 to 130 mN/m. Furthermore, the emulsions exhibited excellent free-radical scavenging activity at oil-water interface, suggesting a potential application in usage to extend the lifespan of the food containing polyunsaturated fats.

The Effect of Nanofillers on the Functional Properties of Biopolymer-based Films: A Review

Waste from non-degradable plastics is becoming an increasingly serious problem. Therefore, more and more research focuses on the development of materials with biodegradable properties. Bio-polymers are excellent raw materials for the production of such materials. Bio-based biopolymer films reinforced with nanostructures have become an interesting area of research. Nanocomposite films are a group of materials that mainly consist of bio-based natural (e.g., chitosan, starch) and synthetic (e.g., poly(lactic acid)) polymers and nanofillers (clay, organic, inorganic, or carbon nanostructures), with different properties. The interaction between environmentally friendly biopolymers and nanofillers leads to the improved functionality of nanocomposite materials. Depending on the properties of nanofillers, new or improved properties of nanocomposites can be obtained such as: barrier properties, improved mechanical strength, antimicrobial, and antioxidant properties or thermal stability. This review compiles information about biopolymers used as the matrix for the films with nanofillers as the active agents. Particular emphasis has been placed on the influence of nanofillers on functional properties of biopolymer films and their possible use within the food industry and food packaging systems. The possible applications of those nanocomposite films within other industries (medicine, drug and chemical industry, tissue engineering) is also briefly summarized.