Lithium Manganese Sulfates as a New Class of Supercapattery Materials at Elevated Temperatures

To make supercapattery devices feasible, there is an urgent need to find electrode materials that exhibit a hybrid mechanism of energy storage. Herein, we provide a first report on the capability of lithium manganese sulfates to be used as supercapattery materials at elevated temperatures. Two compositions are studied: monoclinic Li₂Mn(SO₄)₂ and orthorhombic Li₂Mn₂(SO₄)₃, which are prepared by a freeze-drying method followed by heat treatment at 500 °C. The electrochemical performance of sulfate electrodes is evaluated in lithium-ion cells using two types of electrolytes: conventional carbonate-based electrolytes and ionic liquid IL ones. The electrochemical measurements are carried out in the temperature range of 20-60 °C. The stability of sulfate electrodes after cycling is monitored by in-situ Raman spectroscopy and ex-situ XRD and TEM analysis. It is found that sulfate salts store Li⁺ by a hybrid mechanism that depends on the kind of electrolyte used and the recording temperature. Li₂Mn(SO₄)₂ outperforms Li₂Mn₂(SO₄)₃ and displays excellent electrochemical properties at elevated temperatures: at 60 °C, the energy density reaches 280 Wh/kg at a power density of 11,000 W/kg. During cell cycling, there is a transformation of the Li-rich salt, Li₂Mn(SO₄)₂, into a defective Li-poor one, Li₂Mn₂(SO₄)₃, which appears to be responsible for the improved storage properties. The data reveals that Li₂Mn(SO₄)₂ is a prospective candidate for supercapacitor electrode materials at elevated temperatures.

A quasi-solid composite electrolyte with dual salts for dendrite-free lithium metal batteries

The cycle stability of the Li|HSE|Li battery can be greatly improved by adding magnesium salt to the electrolyte membrane.

Focus on Spinel Li4 Ti5 O12 as Insertion Type Anode for High-Performance Na-Ion Batteries

Sodium-ion batteries (SIBs) toward large-scale energy storage applications has fascinated researchers in recent years owing to the low cost, environmental friendliness, and inestimable abundance. The similar chemical and electrochemical properties of sodium and lithium make sodium an easy substitute for lithium in lithium-ion batteries. However, the main issues of limited cycle life, low energy density, and poor power density hamper the commercialization process. In the last few years, the development of electrode materials for SIBs has been dedicated to improving sodium storage capacities, high energy density, and long cycle life. The insertion type spinel Li₄ Ti₅ O₁₂ (LTO) possesses "zero-strain" behavior that offers the best cycle life performance among all reported oxide-based anodes, displaying a capacity of 155 mAh g^-1 via a three-phase separation mechanism, and competing for future topmost high energy anode for SIBs. Recent reports offer improvement of overall electrode performance through carbon coating, doping, composites with metal oxides, and surface modification techniques, etc. Further, LTO anode with its structure and properties for SIBs is described and effective methods to improve the LTO performance are discussed in both half-cell and practical configuration, i.e., full-cell, along with future perspectives and solutions to promote its use.

Structures and dynamic properties of the LiPF6 electrolytic solution under electric fields - a theoretical study

Fluorinated carbonates have attracted increasing attention in high-voltage lithium ion battery applications. Under free and electric fields, their structure-related solvent dynamic properties such as charge and discharge rate, however, are rarely reported. Herein, solutions including linear fluorinated carbonates have been simulated using joint MD/DFT calculations. For the first time, the dielectric constants of the four pure fluorinated carbonates have been predicted to be ca. 5.4 (4: ethyl-2,2,2-trifluoroethyl carbonate)-12.1 (7: di-1,1,2,2,2-pentafluoroethyl carbonate), which are dependent on the number of fluorine atoms. Minor difference in the solvation free energies and few contact ion associations were observed in the ETFEC and DTFEC solvents. Their comparable viscosity values were found through calculations of ion diffusivity and conductivity. In the electric fields, the Li⁺ mobilities in the two solutions have similar values, showing that the dynamic properties of the electrolytic solutions are almost independent of the number of fluorine atoms on these carbonates. There emerges an oriented and ordered arrangement of the solvent molecules and thus the largely decreased dielectric constants under the electric fields, even though the field strength is very low. These interesting phenomena should be relevant in the formation of contact and aggregate ion pairs, leading to unexpected reduction of the charge-discharge rate-related ion mobility in mixed solvents.