Using green nanocomposite containing eggshell in the electroperoxone process in a baffled reactor to remove the emerging tetracycline pollutant

This study examined the eradication of Tetracycline hydrochloride (TCH) antibiotic, an emerging pollutant, by utilizing eggshell membrane activated carbon (EMAC) and magnetite (Fe3O4) nanocomposite in conjunction with the electroperoxone process employing the One Factor at a Time method (OFAT) in a baffled reactor. The nanocomposite was synthesized through the hydrothermal method using an autoclave, and its properties were assessed via XRD, FTIR, FESEM, EDAX Mapping, BET, and VSM analyses. The findings revealed that under optimal conditions (including a pollutant concentration of 300 mg/L, a natural pH of 6.2, an ozone consumption rate of 0.28 g/h, a nanocomposite concentration of 0.2 g/L, a flow intensity of 0.5 A, a wastewater recirculation flow rate of 8 L/h, and a 0.1 M Na2SO4 electrolyte concentration), 95.9%, 76.4%, and 53.4% of pollutants, COD, and TOC were respectively eliminated after 90 min. Additionally, the reusability of the nanocomposite was evaluated over five usage periods, during which the process efficiency decreased from 95.9% to 83.1%. In short, this study proved that EMAC/Fe3O4 nanocomposites are promising electroperoxone catalysts due to their low cost, excellent stability and reusability, environmental compatibility, and superior catalytic activity for TCH antibiotics removal.

Engineering of Green Carbon Dots for Biomedical and Biotechnological Applications

Carbon dots (CDs) are attracting increasing research attention due to their exceptional attributes, including their biocompatibility, water solubility, minimal toxicity, high photoluminescence, and easy functionalization. Green CDs, derived from natural sources such as fruits and vegetables, present advantages over conventionally produced CDs, such as cost-effectiveness, stability, simplicity, safety, and environmental friendliness. Various methods, including hydrothermal and microwave treatments, are used to synthesize green CDs, which demonstrate strong biocompatibility, stability, and luminescence. These properties give green CDs versatility in their biological applications, such as bioimaging, biosensing, and drug delivery. This review summarizes the prevalent synthesis methods and renewable sources regarding green CDs; examines their optical features; and explores their extensive biological applications, including in bioimaging, biosensing, drug/gene delivery, antimicrobial and antiviral effects, formatting of mathematical components, cancer diagnosis, and pharmaceutical formulations.

Selective Interaction of Chiral Carbon Dots with Nucleic Acids: A Promising Nanosensing Platform

Carbon dots (CDs) represent an emerging class of nanomaterials that combine outstanding photoluminescent properties with low toxicity and excellent biocompatibility. These unique features have garnered significant interest for potential applications in sensing as well as nanovectors for bioactive compounds. Within this context, the possibility of synthesizing chiral carbon dots (CCDs) has paved the way for a plethora of bioapplications in their interaction with chiral biomolecules. In this study we report the synthesis and characterization of CCDs with opposite chiralities and their selective interaction with nucleic acids. A systematic study on their interaction with different oligonucleotides (ODNs) using UV-vis, photoluminescence, and circular dichroism analyses highlighted how the chiral surface of the CCDs induces distinct spectroscopic responses in CCDs-ODN conjugates. These findings establish the foundation for innovative applications of CCDs as nanosensors and nanocarriers for nucleic acids. Additionally, the antioxidant properties of CCDs were investigated, highlighting their dual potential as both sensing and preservative nanomaterials for genetic material. Our results suggest significant implications for the development of chiral-specific diagnostic tools, drug delivery systems, and therapeutic agents. Furthermore, these properties open new avenues for the use of CCDs in antibiotic residue detection, fluorescence imaging, and photodynamic therapy.

An overview on animal/human biomass-derived carbon dots for optical sensing and bioimaging applications

Over the past decade, carbon dots (CDs) have emerged as some of the extremely popular carbon nanostructures for diverse applications. The advantages of sustainable CDs, characterized by their exceptional photoluminescence (PL), high water solubility/dispersibility, non-toxicity, and biocompatibility, substantiate their potential for a wide range of applications in sensing and biology. Moreover, nature offers plant- and animal-derived precursors for the sustainable synthesis of CDs and their doped variants. These sources are not only readily accessible, inexpensive, and renewable but are also environmentally benign green biomass. This review article presents in detail the production of sustainable CDs from various animal and human biomass through bottom-up synthetic methods, including hydrothermal, microwave, microwave-hydrothermal, and pyrolysis methods. The resulting CDs exhibit a uniform size distribution, possibility of heteroatom doping, surface passivation, and remarkable excitation wavelength-dependent/independent emission and up-conversion PL characteristics. Consequently, these CDs have been successfully utilized in multiple applications, such as bioimaging and the detection of various analytes, including heavy metal ions. Finally, a comprehensive assessment is presented, highlighting the prospects and challenges associated with animal/human biomass-derived CDs for multifaceted applications.

Carbon dots and their interactions with recognition molecules for enhanced nucleic acid detection

Carbon Dots (C-dots) have exceptional fluorescence and incident wavelength alteration capabilities because of their π-π* electron transitions between the surface-trapped charges. They have clear, considerate and cost-effective applications in the domain of bio-sensing, optical imaging, medical diagnostics, fluorescence chemotherapy, forensics, and environmentology. Advances in the production process of C-dots can change their optical and chemical characteristics, allowing them to interact with a variety of chemicals and ions that can be exploited for the DNA detection in point-of-care devices. In the current scenario of pathogenic disease prevention, metagenomics and industrial processes, alternative genetic material identification is critical. This review focuses on the existing carbon dots-based DNA detection technologies and their interactions with other components such as metallic salts, dyes, and biological chemicals based on their surface charge distribution (positive or negative) employed in the DNA diagnostic devices and biosensors with their operating mechanism regarding their target component. These intriguing scientific discoveries and technologies will be extensively examined to translate them into real-world solutions which will have a significant societal and economic impact on overall well-being and innovation.

Turning food waste into value-added carbon dots for sustainable food packaging application: A review

Carbon dots (CDs) are a recent addition to the nanocarbon family, encompassing both crystalline and amorphous phases. They have sparked significant research interest due to their unique electrical and optical properties, remarkable biocompatibility, outstanding mechanical characteristics, customizable surface chemistry, and negligible cytotoxicity. Their current applications are mainly limited to flexible photonic and biomedical devices, but they have also garnered attention for their potential use in intelligent packaging. The conversion of food waste into CDs further contributes to the concept of the circular economy. It provides a comprehensive overview of emerging green technologies, energy-saving reactions, and cost-effective starting materials involved in the synthesis of CDs. It also highlights the unique properties of biomass-derived CDs, focusing on their structural performance, cellular toxicity, and functional characteristics. The application of CDs in the food industry, including food packaging, is summarized in a concise manner. This paper sheds light on the current challenges and prospects of utilizing CDs in the packaging industry. It aims to provide researchers with a roadmap to tailor the properties of CDs to suit specific applications in the food industry, particularly in food packaging.

Synthesis, properties and potential applications of photoluminescent carbon nanoparticles: A review

Photoluminescent-carbon nanoparticles (PL-CNPs) are a new class of materials that received immense interest among researchers due to their distinct characteristics, including photoluminescence, high surface-to-volume ratio, low cost, ease of synthesis, high quantum yield, and biocompatibility. By exploiting these outstanding properties, many studies have been reported on its utility as sensors, photocatalysts, probes for bio-imaging, and optoelectronics applications. From clinical applications to point-of-care test devices, drug loading to tracking of drug delivery, and other research innovations demonstrated PL-CNPs as an emerging material that could substitute conventional approaches. However, some of the PL-CNPs have poor PL properties and selectivity due to the presence of impurities (e.g., molecular fluorophores) and unfavourable surface charges by the passivation molecules, which impede their applications in many fields. To address these issues, many researchers have been paying great attention to developing new PL-CNPs with different composite combinations to achieve high PL properties and selectivity. Herein, we thoroughly discussed the recent development of various synthetic strategies employed to prepare PL-CNPs, doping effects, photostability, biocompatibility, and applications in sensing, bioimaging, and drug delivery fields. Moreover, the review discussed the limitations, future direction, and perspectives of PL-CNPs in possible potential applications.

Progress on the luminescence mechanism and application of carbon quantum dots based on biomass synthesis

With the continuous development of carbon-based materials, a variety of new materials have emerged one after another. Carbon Quantum Dots (CQDs) have succeeded in standing out from the crowd of new materials due to their better optical properties in biomedicine, ion detection, anti-counterfeiting materials and photocatalysis. In recent years, through the continuous exploration of CQDs, research scholars have found that the organic substances or heavy metals contained in traditional ones can cause irreversible harm to people and the environment. Therefore, the application of traditional CQDs in future studies will be gradually limited. Among various new materials, biomass raw materials have the merits of good biocompatibility, lower toxicity and green and environmental protection, which largely overcome the defects of traditional materials and have attracted many scholars to focus on the research and development of various biomass CQDs. This paper summarises the optical properties, fluorescence mechanisms, synthetic methods, functionalisation modulation of biomass CQDs and their relevant research progress in the fields of ion detection, bioimaging, biomedicine, biosensing, solar cells, anti-counterfeit materials, photocatalysis and capacitors. Finally, the paper concludes with some discussion of the challenges and prospects of this exciting and promising field of application.

Current trends in carbon-based quantum dots development from solid wastes and their applications

Urbanization and a massive population boom have immensely increased the solid wastes (SWs) generation and are expected to reach 3.40 billion tons by 2050. In many developed and emerging nations, SWs are prevalent in both major and small cities. As a result, in the current context, the reusability of SWs through various applications has taken on added importance. Carbon-based quantum dots (Cb-QDs) and their many variants are synthesized from SWs in a straightforward and practical method. Cb-QDs are a new type of semiconductor that has attracted the interest of researchers due to their wide range of applications, which include everything from energy storage, chemical sensing, to drug delivery. This review is primarily focused on the conversion of SWs into useful materials, which is an essential aspect of waste management for pollution reduction. In this context, the goal of the current review is to investigate the sustainable synthesis routes of carbon quantum dots (CQDs), graphene quantum dots (GQDs), and graphene oxide quantum dots (GOQDs) from various types SWs. The applications of CQDs, GQDs, and GOQDs in the different areas are also been discussed. Finally, the challenges in implementing the existing synthesis methods and future research directions are highlighted.

Eco-Friendly Synthesis of Functionalized Carbon Nanodots from Cashew Nut Skin Waste for Bioimaging

In this study, Anacardium occidentale (A. occidentale) nut skin waste (cashew nut skin waste) was used as a raw material to synthesize functionalized carbon nanodots (F-CNDs). A. occidentale biomass-derived F-CNDs were synthesized at a low temperature (200 °C) using a facile, economical hydrothermal method and subjected to XRD, FESEM, TEM, HRTEM, XPS, Raman Spectroscopy, ATR-FTIR, and Ultraviolet-visible (UV–vis) absorption and fluorescence spectroscopy to determine their structures, chemical compositions, and optical properties. The analysis revealed that dispersed, hydrophilic F-CNDs had a mean diameter of 2.5 nm. XPS and ATR-FTIR showed F-CNDs had a crystalline core and an amorphous surface decorated with –NH2, –COOH, and C=O. In addition, F-CNDs had a quantum yield of 15.5% and exhibited fluorescence with maximum emission at 406 nm when excited at 340 nm. Human colon cancer (HCT-116) cell assays showed that F-CNDs readily penetrated into the cells, had outstanding biocompatibility, high photostability, and minimal toxicity. An MTT assay showed that the viability of HCT-116 cells incubated for 24 h in the presence of F-CNDs (200 μg mL–1) exceeded 95%. Furthermore, when stimulated by filters of three different wavelengths (405, 488, and 555 nm) under a laser scanning confocal microscope, HCT-116 cells containing F-CNDs emitted blue, red, and green, respectively, which suggests F-CNDs might be useful in the biomedical field. Thus, we describe the production of a fluorescent nanoprobe from cashew nut waste potentially suitable for bioimaging applications.

Potential Development of N-Doped Carbon Dots and Metal-Oxide Carbon Dot Composites for Chemical and Biosensing

Among carbon-based nanomaterials, carbon dots (CDs) have received a surge of interest in recent years due to their attractive features such as tunable photoluminescence, cost effectiveness, nontoxic renewable resources, quick and direct reactions, chemical and superior water solubility, good cell-membrane permeability, and simple operation. CDs and their composites have a large potential for sensing contaminants present in physical systems such as water resources as well as biological systems. Tuning the properties of CDs is a very important subject. This review discusses in detail heteroatom doping (N-doped CDs, N-CDs) and the formation of metal-based CD nanocomposites using a combination of matrices, such as metals and metal oxides. The properties of N-CDs and metal-based CDs nanocomposites, their syntheses, and applications in both chemical sensing and biosensing are reviewed.

Valorisation of bio-derived fluorescent carbon dots for metal sensing, DNA binding and bioimaging

Carbon dots are quasi-spherical and zero dimensional nanomaterials with unique optical and electronic properties. In this work, a facile and sustainable strategy was employed to synthesise nitrogen doped carbon dots from Terminalia chebula via hydrothermal treatment with a quantum yield of 19.9%. The structural and optical properties of nitrogen doped carbon dots (N-CDs) were studied by UV-Visible absorption and fluorescence spectroscopy. The surface functional groups, average particle size and elemental analysis were assessed with the help of Fourier Transform Infra Red spectroscopy, High Resolution Transmission Electron Microscopy and Energy Dispersive X-ray analysis respectively. The N-CDs exhibited excitation dependent emission upon irradiation with UV light, pH stability over neutral range and excellent photostability. The average particle size of the synthesised N-CDs was found to be 3.56 nm. The fluorescence intensity of the N-CDs quenched linearly with increase in concentration of Fe³⁺ ions. The limit of detection (LOD) of N-CDs with Fe³⁺ ions was calculated to be 4.5 nM using Stern-Volmer plot. The fluorescence was restored by addition of EDTA to Fe³⁺ coordinated N-CD system. Further, the synthesised N-CDs interacted with ct-DNA through intercalative mode and the binding constant calculated using the Benesi Hildebrand plot was 1.78 × 10⁸ mg/mL. The cytotoxicity of N-CDs was evaluated using MTT assay. The excellent biocompatible and less toxic nature of N-CDs was extrapolated to serve as fluorescent probes for imaging E.coli and SKMEL cells. From the results of this work, it is evident that the synthesised N-CDs can be used to develop efficient fluorescent metal sensors. The fluorescent property of N-CDs enables it to find extension as a potential curative drug, an efficient patterning agent and an effective biomarker to image biological cells causing no damage to normal cells.

Carbon dots synthesized from microorganisms and food by-products: active and smart food packaging applications

Nanotechnology is rapidly becoming a commercial reality for application in food packaging. In particular, the incorporation of nanoparticles into packaging materials is being used to increase the shelf life and safety of foods. Carbon dots (C-dots) have a diverse range of potential applications in food packaging. They can be synthesized from environmentally friendly sources such as microorganisms, food by-products, and waste streams, or they may be generated in foods during normal processing operations, such as cooking. These processes often produce nitrogen- and sulfur-rich heteroatom-doped C-dots, which are beneficial for certain applications. The incorporation of C-dots into food packaging materials can improve their mechanical, barrier, and preservative properties. Indeed, C-dots have been used as antioxidant, antimicrobial, photoluminescent, and UV-light blocker additives in food packaging materials to reduce the chemical deterioration and inhibit the growth of pathogenic and spoilage microorganisms in foods. This article reviews recent progress on the synthesis of C-dots from microorganisms and food by-products of animal origin. It then highlights their potential application for the development of active and intelligent food packaging materials. Finally, a discussion of current challenges and future trends is given.

Preparation of Multifunctional N-Doped Carbon Quantum Dots from Citrus clementina Peel: Investigating Targeted Pharmacological Activities and the Potential Application for Fe3+ Sensing

Carbon quantum dots (CQDs) have recently emerged as innovative theranostic nanomaterials, enabling fast and effective diagnosis and treatment. In this study, a facile hydrothermal approach for N-doped biomass-derived CQDs preparation from Citrus clementina peel and amino acids glycine (Gly) and arginine (Arg) has been presented. The gradual increase in the N-dopant (amino acids) nitrogen content increased the quantum yield of synthesized CQDs. The prepared CQDs exhibited good biocompatibility, stability in aqueous, and high ionic strength media, similar optical properties, while differences were observed regarding the structural and chemical diversity, and biological and antioxidant activity. The antiproliferative effect of CQD@Gly against pancreatic cancer cell lines (CFPAC-1) was observed. At the same time, CQD@Arg has demonstrated the highest quantum yield and antioxidant activity by DPPH scavenging radical method of 81.39 ± 0.39% and has been further used for the ion sensing and cellular imaging of cancer cells. The obtained results have demonstrated selective response toward Fe³⁺ detection, with linear response ranging from 7.0 µmol dm⁻³ to 50.0 µmol dm⁻³ with R² = 0.9931 and limit of detection (LOD) of 4.57 ± 0.27 µmol dm⁻³. This research could be a good example of sustainable biomass waste utilization with potential for biomedical analysis and ion sensing applications.

Covalent Conjugation of Carbon Dots with Plasmid and DNA Condensation Thereafter: Realistic Insights into the Condensate Morphology, Energetics, and Photophysics

The use of carbon quantum dots (CDs) as trackable nanocarriers for plasmid and gene as hybrid DNA condensates has gained momentum, as evident from the significant recent research efforts. However, the in-depth morphology of the condensates, the energetics of the condensation process, and the photophysical aspects of the CD are not well understood and often disregarded. Herein, for the first time, we covalently attached linearized pUC19 with citric acid and cysteamine-derived CD through the reaction of the surface amine groups of CDs with the 5'-phospho-methyl imidazolide derivative of the plasmid to obtain a 1:1 CD-pUC19 covalent conjugate. The CD-pUC19 conjugates were further transformed into DNA condensates with spermine that displayed a toroidal morphology with a diameter of ∼200 nm involving ∼2-5 CD-pUC19 conjugates in a single condensate. While the interaction of pristine CD to spermine was exothermic, the binding of the CD-pUC19 conjugate with spermine was endothermic and primarily entropy-driven. The condensed plasmid displayed severe conformational stress and deviation from the B-form due to the compact packing of the DNA but better transfection ability than the pristine CD. The CDs in the condensates tend to come close to each other at the core that results in their shielding from excitation. However, this does not prevent them from emanating reactive oxygen species on visible light exposure that compromises the decondensation process and cell viability at higher exposure times, calling for utmost caution in establishing them as nonviral transfecting agents universally.

Synthesis and characterization of novel protein nanodots as drug delivery carriers with an enhanced biological efficacy of melatonin in breast cancer cells

Melatonin is a potent antioxidant, chemotherapeutic and chemo preventive agent against breast cancer. However, its short half-life is one of the major limitations in its application as a therapeutic drug. To overcome this issue, the green-emitting protein nanodot (PND) was synthesized by a one-step hydrothermal method for loading melatonin. The synthesized pH-7 and pH-2 PND showed a quantum yield of 22.1% and 14.0%, respectively. The physicochemical characterization of both PNDs showed similar morphological and functional activities. Furthermore, the biological efficacy of melatonin-loaded PND (MPND) was evaluated in a breast cancer cell line (MDA-MB-231) for live-cell imaging and enhanced nano-drug delivery efficacy. Interestingly, the permeability of neutral pH PND in both cell cytoplasm and nucleus nullifies the limitations of real-time live-cell imaging, and ensures nuclear drug delivery efficacy. Neutral pH PND showed better cell viability and cytotoxicity as a fluorescence bioimaging probe compared to acidic PND. The bioavailability and cell cytotoxicity effect of MPND on MDA-MB-231 breast cancer cells were studied through confocal and migration assay. Results showed that MPND causes enhanced bioavailability, better cellular uptake, and inhibition of the migration of breast cancer cells as compared to the drug alone. Besides, the synthesized MPND showed no sign of fluorescence quenching even at a high concentration of melatonin, making it an ideal nanocarrier for bioimaging and drug delivery.

Green Synthesis of Multifunctional Carbon Dots with Antibacterial Activities

Carbon dots (CDs) were obtained from medicinal turmeric leaves (Curcuma longa) by a facile one-step hydrothermal method and evaluated for their bactericidal activities against two gram-negative; Escherichia coli, Klebsiella pneumoniae, and two gram-positive counterparts; Staphylococcus aureus, S. epidermidis. The CDs exhibited spherical shapes with a mean size of 2.6 nm. The fluorescence spectra of CDs revealed intense fluorescence at λex/em = 362/429 nm with a bright blue color in an aqueous solution. The CDs showed strong photostability under various environmental conditions (pH, salt, and UV-radiation). The complete bactericidal potency of CDs was 0.25 mg/mL for E.coli and S. aureus after 8 h of exposure, while for K. pneumoniae, and S. epidermidis, the CDs at 0.5 mg/mL good antibacterial effect within 8 h and complete eradication after 24 h of exposure is observed. The release of reactive oxygen species played a crucial role in the death of the bacterial cell. The present study provides a strategy for the preparation of CDs from a medicinal plant and their potential antibacterial activities against four common contagious pathogens.

Pressure-induced assemblies and structures of graphitic-carbon sheet encapsulated Au nanoparticles

A novel strategy of using hydrostatic pressures to synthesize gold-carbon (Au-C) nanohybrid materials is explored. The stable face-centered-cubic (fcc) Au undergoes a structural phase transition to a mixture of primitive orthorhombic and cubic phases as the carbon phase acquires a highly ordered onion-like carbon (OLC) structure which encapsulates the Au nanoparticles, thereby exerting an additional pressure. Increasing the pressure results in a one dimensional (1-D) chain-like structure with the primitive cubic Au nanoparticles contained in an amorphous carbon matrix. The OLC structure allows the formation of quenchable Au nanoparticle phases with the primitive close packing and Au-C hybrids with new mesoscopic structures. Under pressure, we observe the formation of a hybrid material composed of a poorly conducting matrix made of amorphous carbon and conducting OLC-encapsulated Au nanoparticles. The electrical conductivity of this hybrid material under pressure reveals a percolation threshold. We present a new synthesis approach to explore the interplay between atomic and mesoscopic structures and the electrical conductivity of metal hybrid structures.

Carbon Dots for Forensic Applications: A Critical Review

Owing to their superior fluorescence performance, inexpensive synthesis and nontoxic nature, carbon dots (C-dots) are systematically explored in a variety of applications; in this review, we outline and critically discuss recent trends with respect to their potential exploitation in criminal investigation, forensic toxicology and anti-counterfeit interventions. Capitalising on their colour-tuneable behaviour (in the sense that they adopt different colours with respect to the incident radiation), C-dot-based compositions are ideal for the visual enhancement of latent fingerprints, affording improved contrast against multicoloured and patterned backgrounds. As highly sensitive and highly selective optical nanoprobes, C-dots show excellent analytical performance in detecting biological compounds, drugs, explosives, heavy metals and poisonous reactants. In addition, benefiting from their versatile structural and chemical composition, C-dots can be incorporated into ink and polymeric formulations capable of functioning as a new generation of cost-effective barcodes and security nanotags for object authentication and anti-counterfeit applications. Translating these encouraging research outcomes into real-life innovations with significant social and economic impact requires an open, multidisciplinary approach and a close synergy between materials scientists, biologists, forensic investigators and digital engineers.

Preferential Binding of Thioflavin T to AT-Rich DNA: White Light Emission through Intramolecular Förster Resonance Energy Transfer

Herein we report the effect of different nucleobase pair compositions on the association-induced fluorescence enhancement property of Thioflavin T (ThT), upon binding with 20 base pair long double-stranded DNA (dsDNA). Analysis of binding and decay constants along with the association (K_ass) and dissociation (K_diss) rate constants obtained from the fluctuation in the fluorescence intensity of ThT after binding with different DNA revealed selective affinity of ThT toward AT-rich dsDNA. Molecular docking also substantiates the experimental results. We also observed that addition of orange-emitting ethidium bromide (EtBr) to cyan-emitting ThT-DNA complexes leads to bright white light emission (WLE) through Förster resonance energy transfer. Additionally, the emission of white light is far greater in the case of intra-DNA strands. Besides endorsing the binding insights of ThT to AT-rich dsDNA, the present investigations open a new perspective for realizing promising WLE from two biomarkers without labeling the DNA.

Future Perspectives and Review on Organic Carbon Dots in Electronic Applications

Over the span of the past decade, carbon dots (CDs) synthesized from renewable organic resources (organic CDs) have gathered a considerable amount of attention for their photoluminescent properties. This review will focus on organic CDs synthesized using clean chemistry and conventional synthetic chemistry from organic sources and their fluorescence mechanisms, such as quantum confinement effect and surface/edge defects, before outlining their performance in electronic applications, including organic photovoltaic devices, organic light-emitting devices, biosensors, supercapacitors, and batteries. The various organic resources and methods of organic CDs synthesis are briefly covered. Many challenges remain before the adoption of CDs can become widespread; their characterization, structure, functionality, and exact photoluminescent mechanism all require additional research. This review aims to summarize the current research outcomes and highlight the area where further research is needed to fully use these materials.