Experimental and computational approaches of methoxy naphthylbithiophene derivatives and their use as corrosion protection for carbon steel in acidic medium

The inhibition efficiency and adsorption affinity were investigated for two novel compounds, namely: 6-methoxy-2-naphthyl-[2, 2'-bithiophene]-5-carboxamidine hydrochloride salt (MA-1440) and 5'-(4-chlorophenyl)-2, 2'-bifuran-5-carboxamidine hydrochloride salt (MA-1456). The inhibition study was conducted on carbon steel surface in 1.0 M HCl with different inhibitor doses and different temperature levels, to investigate the optimum dose and preferable temperature. The performed investigation included chemical, electrochemical, instrumental, and quantum computation techniques. A chemical technique was accomplished by using weight-loss measurements. Different factors were studied using weight-loss measurements in order to reach the maximum inhibition efficiency. The adsorption study revealed that the examined inhibitors obey the Langmuir adsorption isotherm and are chemically adsorbed on the steel surface. The electrochemical measurements were accomplished through the electrochemical impedance (EIS) and potentiodynamic polarization (PDP) techniques. Based on the electrochemical measurements, the examined compounds were categorized as mixed inhibitors. The instrumental examination using different techniques namely: scanning electron microscope (SEM), energy dispersive X-ray (EDX), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) confirmed that the considered inhibitors are excellently adsorbed over the carbon steel surface. The extent of the adsorption affinity of these compounds on the carbon steel surface was studied theoretically using quantum computations and Monte Carlo simulation. The theoretical investigation results of quantum chemistry were validated with those obtained by chemical and electrochemical methodologies. All investigations prove that, the tested compounds were adsorbed chemically on the steel surface and achieved maximum inhibition efficiency of, 94.69% and 90.85% for M-1440 and MA-1456, respectively, at the optimum concentration 30 [Formula: see text] 10^-6 mol L^-1 and temperature 328 K.

Corrosion Inhibition Studies of 8-Hydroxyquinoline Derivatives for N80 Steel in a 1.0 M HCl Solution: Experimental, Computational Chemistry, and Quantitative Structure-Activity Relationship Studies

Twelve kinds of 8-hydroxyquinoline derivatives were synthesized and characterized. The weight loss method was used to evaluate their inhibition efficiencies (IEs) in a 1.0 M HCl solution at 333 K. The results showed that the alkyl chain length, heteroatoms (S, N, and O), and number of benzene rings significantly affect the IE. Herein, the IE of 5-[(dodecylthio)methyl]-8-quinolinol reached 98.71%. Meanwhile, the potentiodynamic polarization results indicated that all 8-hydroxyquinoline derivatives were mixed-type inhibitors. Electrochemical impedance spectroscopy results revealed that 8-hydroxyquinoline derivatives can increase polarization resistance, supporting their adsorption on the N80 steel surface. Moreover, according to density functional theory (DFT), the frontier orbital distribution and quantum chemical parameters (E_HOMO, E_LUMO, dipole moment μ, etc.) were calculated, and the results confirmed that the substituents of protonated 8-hydroxyquinoline derivatives significantly influenced the frontier orbital distribution. Molecular dynamics simulation illustrated that all protonated 8-hydroxyquinoline derivatives were adsorbed parallel to the Fe(110) surface, and the interaction energy (E_int) evidenced that the molecular size would affect their strength of adsorption on the Fe(110) surface. The linear and nonlinear quantitative structure-activity relationship models were established by linear regression (LR) methods and BP neural networks (NN), respectively. The LR model was established by using E_int and μ, and the coefficient of determination (R²) was 0.934. In addition, the nonlinear NN model was obtained according to IE and all parameters (DFT parameters and E_int). Then, the two calculation inhibition efficiencies (IE_cal) were obtained from the LR and NN models, and the R² values of the linear correlation between the IE_cal and the experimental IE were 0.940 and 0.951, respectively. In addition, the IE of the tested inhibitor was 51.86% and the IE_cal values predicted by the LR and NN models were 52.68% and 53.06%, respectively. Our results demonstrate that both the LR and NN models have good fits and predictive ability.

Corrosion protection of carbon steel by methoxy naphthylbithiophene derivatives in acidic medium: Electrochemical, surface characterization and computational approaches.. [DOI: 10.21203/rs.3.rs-2233861/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

The inhibition efficiency and adsorption affinity were investigated for two novel compounds, namely: 6-methoxy-2-naphthyl-[2, 2’-bithiophene]-5-carboxamidine hydrochloride salt (MA-1440) and 5'-(4-chlorophenyl)-2, 2’-bifuran-5-carboxamidine hydrochloride salt (MA-1456). The inhibition study was conducted on carbon steel surface in 1.0 M HCl with different inhibitor doses and different temperature levels, to investigate the optimum dose and preferable temperature. The performed investigation included chemical, electrochemical, instrumental, and quantum computation techniques. A chemical technique was accomplished by using weight-loss measurements. Different factors were studied using weight-loss measurements in order to reach the maximum inhibition efficiency. The adsorption study revealed that the examined inhibitors obey the Langmuir adsorption isotherm and are chemically adsorbed on the steel surface. The electrochemical measurements were accomplished through the electrochemical impedance (EIS) and potentiodynamic polarization (PDP) techniques. Based on the electrochemical measurements, the examined compounds were categorized as mixed inhibitors. The instrumental examination using different techniques namely: scanning electron microscope (SEM), energy dispersive X-ray (EDX), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) confirmed that the considered inhibitors are excellently adsorbed over the carbon steel surface. The extent of the adsorption affinity of these compounds on the carbon steel surface was studied theoretically using quantum computations and Monte Carlo simulation. The theoretical investigation results of quantum chemistry were validated with those obtained by chemical and electrochemical methodologies. All investigations prove that, the tested compounds were adsorbed chemically on the steel surface and achieved maximum inhibition efficiency of, 94.69% and 90.85% for M-1440 and MA-1456, respectively, at the optimum concentration 3010-6 mol. L-1 and temperature 328 K.

A Study of the Synthesis and Characterization of New Acrylamide Derivatives for Use as Corrosion Inhibitors in Nitric Acid Solutions of Copper

The objective of this research was to explore the impact of corrosion inhibition of some synthetic acrylamide derivatives 2-cyano-N-(4-hydroxyphenyl)-3-(4-methoxyphenyl)acrylamide (ACR-2) and 2-cyano-N-(4-hydroxyphenyl)-3-phenylacrylamide (ACR-3) on copper in 1.0 M nitric acid solution using chemical and electrochemical methods, including mass loss as a chemical method and electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PP) as electrochemical methods. By Fourier-transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (1HNMR), and mass spectroscopy (MS) methods, the two compounds were verified and characterized. There is evidence that both compounds were effective corrosion inhibitors for copper in 1.0 M nitric acid (HNO₃) solutions, as indicated by the PP curves, which show that these compounds may be considered mixed-type inhibitors. With the two compounds added, the value of the double-layer capacitance was reduced. In the case of 20 × 10^-5 M, they reached maximum efficiencies of 84.5% and 86.1%, respectively. Having studied its behavior during adsorption on copper, it was concluded that it follows chemical adsorption and Langmuir isotherm. The theoretical computations and the experimental findings were compared using density functional theory (DFT) and Monte Carlo simulations (MC).

Electrochemical, Isotherm, and Material Strength Studies of Cucumeropsis mannii Shell Extract on A515 Grade 70 Carbon Steel in NaCl Solution

In this study, corrosion inhibition efficiency of Cucumeropsis mannii shell extract (CMSE) was tested on A515 Grade 70 carbon steel in 1.0 M NaCl solution. Potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and weight loss (WL) measurements were used to investigate the inhibition efficiency. Scanning electron microscopy, Fourier transform infrared spectroscopy, atomic adsorption spectroscopy, and energy dispersive spectroscopy were used to characterize the carbon steel and extract. PDP and EIS measurements revealed maximum inhibition efficiency of 91.2% and 92.2%, respectively. Tafel plot confirmed inhibitor to be a mixed type. A monolayer adsorption of CMSE molecules occurred spontaneously by physisorption. Polarization resistance increased with increasing inhibitor concentration. WL measurement revealed decrease in corrosion rate with increasing concentration of corrosion inhibitor. Maximum Young modulus and hardness of 202.4 GPa and 112.3 BHN, respectively, were recorded for the carbon steel at a minimum corrosion rate and load. Pitting and uniform corrosion were formed on the carbon steel in the absence of CMSE. CMSE contains –OH, –OCH3, and –C-NH3 as active functional groups. In conclusion, Cucumeropsis mannii shell extract acted excellently as corrosion inhibitor for A515 Grade 70 carbon steel in 1.0 M NaCl.

The anti-corrosive behavior of benzo-fused N-heterocycles: an in silico study toward developing organic corrosion inhibitors

The work provides a computational protocol to predict the anti-corrosive performance of organic molecules through three successive phases of calculations; electron propagator theory (EPT), Monte Carlo (MC) simulations, and the density functional based tight-binding (DFTB) method. The protocol was applied to investigate the influence of two structural factors on the anti-corrosive performance of benzo fused-N-heterocycles (BFNHs) against the Fe(110) surface in an acidic medium; positional isomerism and the gradual insertion of nitrogen atoms in the heterocycle ring. The choice of BFNHs is attributed to their anti-corrosion activity and their use as building blocks in the molecular structure of many organic inhibitors. The findings indicate that EPT is a safe method for calculating the quantum chemical descriptors of the isolated molecules. Besides, the current work recommends using MC simulations and the DFTB method to describe the physical and chemical adsorption, respectively. Unexpected results were observed, as the gradual insertion of nitrogen atoms is not a specific factor for improving the inhibition efficiency of BFNHs. The findings were crystallized in equations linking the physical and chemical adsorption energies with the quantum chemical descriptors with a correlation exceeding 0.75. Besides, the peri steric hindrance plays an influential role in chemical adsorption. Intriguingly, the continuous introduction of nitrogen atoms does not increase the efficiency of the inhibitor along the way. For example, phthalazine exhibited better efficiency than benzotetrazine. In light of the above, the present protocol helps understand the anti-corrosive behavior of organic inhibitors and provides a feasible method to develop novel corrosion inhibitors.

Effectiveness of some novel heterocyclic compounds as corrosion inhibitors for carbon steel in 1 M HCl using practical and theoretical methods

Corrosion of carbon steel is a major problem that destroys assists of industries and world steel installations; the importance of this work is to introduce new heterocyclic compounds as effective and low-cost corrosion inhibitors. Three compounds of carbohydrazide derivatives, namely: 5-amino-N'-((2-methoxynaphthalen-1-yl)methylene)isoxazole-4-carbohydrazide (H4), 2,4-diamino-N'-((2-methoxy-naphthalene-1-yl)methylene) pyrimidine-5-carbohydrazide (H5) and N'-((2-methoxynaphthalen-1-yl)methylene)-7,7-dimethyl-2,5-dioxo-4a,5,6,7,8,8a-hexahydro-2H-chromene-3-carbohydrazide (H6) were used to examine the efficacy of corrosion of carbon steel in 1 M hydrochloric acid solution. This corrosion efficacy was detected by utilizing various methods including electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), weight loss measurements (WL), surface morphology analyses by atomic force microscopy (AFM), quantum chemical computations based on density functional theory (DFT) and molecular dynamics (MD) simulation. The results indicated that these compounds act as mixed type inhibitors i.e. reduce the corrosion rate of carbon steel due to the formation of a stable protective film on the metal surface and reduce the cathodic hydrogen evolution reaction. As confirmed from impedance, carbohydrazide derivatives molecules are adsorbed physically on metal surface with higher corrosion efficacy reached to (81.5-95.2%) at 20 × 10-6 M concentration at room temperature. Temkin isotherm model is the most acceptable one to describe the carbohydrazide derivative molecules adsorption on the surface of carbon steel. Protection mechanism was supported by quantum chemical analyses and Monte Carlo modeling techniques. The theoretical calculations support the experimental results obtained. This proves the use of carbohydrazide derivatives as a very effective inhibitors against the corrosion of carbon steel in acidic media.

Experimental and surface morphological studies of corrosion inhibition on carbon steel in HCl solution using some new hydrazide derivatives

The corrosion inhibition of C-steel in 1 M HCl was assessed using three newly synthesized hydrazide derivatives (H1, H2 and H3) using weight loss (WL), potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) techniques. Also, the adsorption of these compounds was confirmed using several techniques such as atomic force microscopy (AFM), Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). High inhibition efficiencies were obtained resulting from the constitution of the protective layer on the C-steel surface, which increased with increasing concentration and temperature and reached 91.7 to 96.5% as obtained from the chemical method at 20 × 10-6 M at 45 °C. The polarization curves refer to these derivatives belonging to mixed-type inhibitors. The adsorption of (H1, H2 and H3)on the CS surface follows the Temkin adsorption isotherm. Inhibition influence of hydrazide derivatives at the molecular level was greatly proven using quantum chemical calculations and Monte Carlo simulation methods. Furthermore, the molecular simulation results evidenced the adsorption of these derivatives on the carbon steel surface.

Potential of dibenzo-18-crown-6-ether derivatives as a corrosion inhibitor on mild steel in HCl medium: electrochemical and computational approaches

The corrosion inhibition behaviour of the macrocyclic dibenzo-18-crown-6 derivatives BOH and OHB was investigated experimentally and theoretically on mild steel in a 15% hydrochloric acid medium.

Novel triazole derivatives as ecological corrosion inhibitors for mild steel in 1.0 M HCl: experimental & theoretical approach

The present paper illustrates the investigation of two novel ecological triazole derivative corrosion inhibitors, namely ethyl 2-(4-phenyl-1H-1,2,3-triazol-1-yl) acetate [Tria-CO₂Et], and 2-(4-phenyl-1H-1,2,3-triazol-1-yl) acetohydrazide [Tria-CONHNH₂].

Anticorrosion effect of a green sustainable inhibitor on mild steel in hydrochloric acid

Green inhibitors are an important way to decrease the corrosion rate of different industrial metals. The present work shows the corrosion behavior of the mild steel medium (MS) in hydrochloric acid 1 M by the aqueous extract of Artemisia Herba Alba (AHA), which is an green sustainable inhibitor to reduce its corrosive action by exploiting a variety of techniques and methods namely: Weight loss, electrochemical techniques [electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP], SEM-EDX, XPS and theoretical calculations for the majority molecule. Hydrodistillation is the extraction method that has been used to prepare the aqueous extracts. Otherwise, phytochemical screening characterization of different parts of the plant was applied to show the proportions of chemical compounds that exist in the plants. The highest inhibition efficiency obtained is 92% for 0.4 g/L of AHA aqueous extract in 1 M HCl at 303 K. PDP study confirmed that the AHA extract is of mixed-kind inhibitor. A CPE, Q determined by fit and graphical methods plotted by synthetic data, was utilized. To characterize the mild steel surface, scanning electron microscopy was also used; SEM/EDX allowed the investigation of the AHA effect on the surface of mild steel specimens. To comprehend the adsorption mechanism of AHA extract for MS in the 1 M HCl, XPS technique was accomplished. Theoretical approaches based on chemical quantum calculations and molecular dynamics simulation clearly explains the mode of adsorption of the majority molecule on the iron surface.