Engineering enzyme microenvironments for enhanced biocatalysis

Structure-based reshaping of a new ketoreductase from Sphingobacterium siyangense SY1 toward α-haloacetophenones

Ketoreductases play an indispensable role in the asymmetric synthesis of chiral drug intermediates, and an in-depth understanding of their substrate selectivity can improve the efficiency of enzyme engineering. In this endeavor, a new short-chain dehydrogenase/reductase (SDR) SsSDR1 identified from Sphingobacterium siyangense SY1 by gene mining method was successfully cloned and functionally expressed in Escherichia coli. Its activity against halogenated acetophenones has been tested and the results illustrated that SsSDR1-WT exhibits high activity for 3,5-bis(trifluoromethyl)acetophenone (1f), an important precursor in the synthesis of aprepitant. In addition, SsSDR1-WT showed obvious substrate preference for acetophenones without α-halogen substitution compared to their α-halogen analogs. To explore the structural basis of substrate selectivity, the X-ray crystal structures of SsSDR1-WT in its apo form and the complex structure with NAD were resolved. Taking 2-chloro-1-(3, 4-difluorophenyl) ethanone (1i) as the representative α-haloacetophenone, the key sites affecting substrate selectivity of SsSDR1-WT were identified and through the rational remodeling of the cavities C1 and C2 of SsSDR1, an excellent mutant I144A/S153L with significantly improved activity against α-halogenated acetophenones was obtained. The asymmetric catalysis of 1f and 1i was performed at the scale of 50 mL, and the space-time yields (STY) of the two were 1200 and 6000 g/L∙d, respectively. This study not only provides valuable biocatalysts for halogenated acetophenones, but also yields insights into the relationship between the substrate-binding pocket and substrate selectivity.

An acid-activatable fluorouracil prodrug for colorectal cancer synergistic therapy

5-Fluorouracil has demonstrated certain efficiency in patients with colorectal cancer. However, significant side effects of use by injection are common. To address this issue defects, a reengineered 5'-deoxy-5-fluorocytidine (DFCR) based drug delivery system (POACa) is developed as a prominent tumor-selective nano-activator. Investigations demonstrate that the constructed nano-activator exhibits good biocompatibility and high therapeutic efficiency in mice with subcutaneous and orthotopic SW-480 colorectal tumors, as its activity is strictly dependent on the tumor-associated acid environment and thymidine phosphorylase. These strategies diminish the off-target toxicity and improve the specificity and sensitivity of human colorectal cancer cells to 5-Fu, obtaining potent efficiency by the combination of H2O2 mediated oxidative stress, calcium overload and 5-Fu-induced chemotherapy (the combination index is 0.11). Overall, the engineered nano-activator exhibits a high therapeutic index in vitro and in vivo. STATEMENT OF SIGNIFICANCE: In this study, we designed and prepared a pH-responsive polymer to synchronously deliver DFCR (5'-deoxy-5-fluorocytidine, a prodrug of 5-Fu), Ca2+ and H2O2. The constructed nano-activator was denoted as POACa. (1) To address the problem of premature leakage of cargo by physical embedding, our research modified the inactive prodrug DFCR through chemical bonding. (2) The activation of the prepared nano-activator was strictly dependent on the tumor-associated acid environment and thymidine phosphorylase, providing the drug delivery system with inherent safety. (3) A distinctly low combination index value (0.11) of CaO2 and DFCR indicated that POACa has a prominent tumor suppression effect by tumor calcium overload sensitized chemotherapy and H2O2 mediated cytotoxicity.

Enzyme Engineering by Force: DNA Springs for the Modulation of Biocatalytic Trajectories

The engineering of enzymatic activity generally involves alteration of the protein primary sequences, which introduce structural changes that give rise to functional improvements. Mechanical forces have been used to interrogate protein biophysics, leading to deep mechanistic insights in single-molecule studies. Here, we use simple DNA springs to apply small pulling forces to perturb the active site of a thermostable alcohol dehydrogenase. Methods were developed to enable the study of different spring lengths and spring orientations under bulk catalysis conditions. Tension applied across the active site expanded the binding pocket volume and shifted the preference of the enzyme for longer chain-length substrates, which could be tuned by altering the spring length and the resultant applied force. The substrate specificity changes did not occur when the DNA spring was either severed or rotated by ∼90°. These findings demonstrate an alternative approach in protein engineering, where active site architectures can be dynamically and reversibly remodeled using applied mechanical forces.

Unlocking a Sustainable Future for Plastics: A Chemical-Enzymatic Pathway for Efficient Conversion of Mixed Waste to MHET and Energy-Saving PET Recycling

The heterogeneous monomers obtained from plastic waste degradation are unfavorable for PET recondensation and high-value derivative synthesis. Herein, we developed an efficient chemical-enzymatic approach to convert mixed plastic wastes into homogeneous mono-2-hydroxyethyl terephthalate (MHET) without downstream purification, benefiting from three discovered BHETases (KbEst, KbHyd, and BrevEst) in nature. Towards the mixed plastic waste, integrating the chemical K2CO3-driven glycolysis process with the BHETase depolymerization technique resulted in an MHET yield of up to 98.26 % in 40 h. Remarkably, BrevEst accomplished the highest BHET hydrolysis (~87 % efficiency in 12 h) for yielding analytical-grade MHET compared to seven state-of-the-art PET hydrolases (18 %-40 %). In an investigation combining quantum theoretical computations and experimental validations, we established a MHET-initiated PET repolymerization pathway. This shortcut approach with MHET promises to strengthen the valorization of mixed plastics, offering a substantially more efficient and energy-saving route for PET recycling.

Immobilized Multi-Enzyme/Nanozyme Biomimetic Cascade Catalysis for Biosensing Applications

Multiple enzyme-induced cascade catalysis has an indispensable role in the process of complex life activities, and is widely used to construct robust biosensors for analyzing various targets. The immobilized multi-enzyme cascade catalysis system is a novel biomimetic catalysis strategy that immobilizes various enzymes with different functions in stable carriers to simulate the synergistic catalysis of multiple enzymes in biological systems, which enables high stability of enzymes and efficiency enzymatic cascade catalysis. Nanozymes, a type of nanomaterial with intrinsic enzyme-like characteristics and excellent stabilities, are also widely applied instead of enzymes to construct immobilized cascade systems, achieving better catalytic performance and reaction stability. Due to good stability, reusability, and remarkably high efficiency, the immobilized multi-enzyme/nanozyme biomimetic cascade catalysis systems show distinct advantages in promoting signal transduction and amplification, thereby attracting vast research interest in biosensing applications. This review focuses on the research progress of the immobilized multi-enzyme/nanozyme biomimetic cascade catalysis systems in recent years. The construction approaches, factors affecting the efficiency, and applications for sensitive biosensing are discussed in detail. Further, their challenges and outlooks for future study are also provided.

Enzyme stability in polymer hydrogel-enzyme hybrid nanocarrier containing phosphorylcholine group

Enzymes are biological catalysts with good biocompatibility and high efficiency and have been widely used in many fields, such as wastewater treatment, biosensors, and the medical industry. However, their inherently low stability under conditions of practical use limits further applications. Zwitterionic polymers possessing a pair of oppositely charged groups in their repeating units can increase protein stability because of their good biocompatibility and high water content. In this study, zwitterionic copolymer nanogels comprising poly(2-methacryloyloxyethyl phosphorylcholine (MPC)-co-methacrylic acid-N-hydroxy succinimide ester (MNHS)) (PMS) were synthesized via reversible addition-fragmentation chain-transfer polymerization (RAFT). β-Galactosidase (β-gal) was post-modified within zwitterionic polymer nanogels with a covalently-bound spacer and the activity was compared with that of directly immobilized β-gal and free β-gal. Compared with direct immobilization, covalent immobilization with a spacer could reduce the structural change of β-gal, as confirmed by the circular dichroism spectra. Although the activity of β-gal decreased after immobilization, the hybrids of the β-gal immobilized nanogels, termed hybrid nanogel-enzymes, demonstrated superior stability compared to the free enzymes. The hybrid nanogel-enzymes maintained their function against inactivation by organic solvents and proteinases owing to their high water content, anti-biofouling properties, and limited mass transfer. They can also withstand protein aggregation at high temperatures and maintain their activity. Compared to direct immobilization, immobilization with a spacer resulted in a dramatic increase in the enzyme activity and a slight decrease in the stability. These results indicate that polymer nanogels containing phosphorylcholine units are promising materials for enzyme immobilization, expanding the scope of enzyme applications.

Engineered polymer nanoparticles as artificial chaperones facilitating the selective refolding of denatured enzymes

Molecular chaperones assist in protein refolding by selectively binding to proteins in their nonnative states. Despite progress in creating artificial chaperones, these designs often have a limited range of substrates they can work with. In this paper, we present molecularly imprinted flexible polymer nanoparticles (nanoMIPs) designed as customizable biomimetic chaperones. We used model proteins such as cytochrome c, laccase, and lipase to screen polymeric monomers and identify the most effective formulations, offering tunable charge and hydrophobic properties. Utilizing a dispersed phase imprinting approach, we employed magnetic beads modified with destabilized whole-protein as solid-phase templates. This process involves medium exchange facilitated by magnetic pulldowns, resulting in the synthesis of nanoMIPs featuring imprinted sites that effectively mimic chaperone cavities. These nanoMIPs were able to selectively refold denatured enzymes, achieving up to 86.7% recovery of their activity, significantly outperforming control samples. Mechanistic studies confirmed that nanoMIPs preferentially bind denatured rather than native enzymes, mimicking natural chaperone interactions. Multifaceted analyses support the functionality of nanoMIPs, which emulate the protective roles of chaperones by selectively engaging with denatured proteins to inhibit aggregation and facilitate refolding. This approach shows promise for widespread use in protein recovery within biocatalysis and biomedicine.

DNA Framework-Programmed Nanoscale Enzyme Assemblies

Multienzyme assemblies mediated by multivalent interaction play a crucial role in cellular processes. However, the three-dimensional (3D) programming of an enzyme complex with defined enzyme activity in vitro remains unexplored, primarily owing to limitations in precisely controlling the spatial topological configuration. Herein, we introduce a nanoscale 3D enzyme assembly using a tetrahedral DNA framework (TDF), enabling the replication of spatial topological configuration and maintenance of an identical edge-to-edge distance akin to natural enzymes. Our results demonstrate that 3D nanoscale enzyme assemblies in both two-enzyme systems (glucose oxidase (GOx)/horseradish peroxidase (HRP)) and three-enzyme systems (amylglucosidase (AGO)/GOx/HRP) lead to enhanced cascade catalytic activity compared to the low-dimensional structure, resulting in ∼5.9- and ∼7.7-fold enhancements over homogeneous diffusional mixtures of free enzymes, respectively. Furthermore, we demonstrate the enzyme assemblies for the detection of the metabolism biomarkers creatinine and creatine, achieving a low limit of detection, high sensitivity, and broad detection range.

Carbon redirection via tunable Fenton-like reactions under nanoconfinement toward sustainable water treatment

The ongoing pattern shift in water treatment from pollution control to energy recovery challenges the energy-intensive chemical oxidation processes that have been developed for over a century. Redirecting the pathways of carbon evolution from molecular fragmentation to polymerization is critical for energy harvesting during chemical oxidation, yet the regulation means remain to be exploited. Herein, by confining the widely-studied oxidation system-Mn3O4 catalytic activation of peroxymonosulfate-inside amorphous carbon nanotubes (ACNTs), we demonstrate that the pathways of contaminant conversion can be readily modulated by spatial nanoconfinement. Reducing the pore size of ACNTs from 120 to 20 nm monotonously improves the pathway selectivity toward oligomers, with the yield one order of magnitude higher under 20-nm nanoconfinement than in bulk. The interactions of Mn3O4 with ACNTs, reactant enrichment, and pH lowering under nanoconfinement are evidenced to collectively account for the enhanced selectivity toward polymerization. This work provides an adaptive paradigm for carbon redirection in a variety of catalytic oxidation processes toward energy harvesting and sustainable water purification.

Proton transfer and regulation across chemical interfaces by small-molecule assemblies

We report on measurements and control of proton gradient across interfaces of water and dichloroethane. Such interfaces are interesting as mimics of biological membranes. We use impedance spectroscopy to quantify interfacial proton gradient and identify proton transfer modes. We quantify proton movement using reciprocal of time constant (τ-1 ) acquired from electrochemical impedance modeling. We show that proton gradient across interfaces of water/dichloroethane and τ-1 correlate with the aqueous phase pH, changing from ca. 1 s-1 at pH 1 to 0.2 s-1 at pH 7. τ-1 changes in the presence of proton shuttling fat-soluble molecules. Dinitrophenol acts as a pH activated proton coupler which is active at around neutral pH and inert at pH <4. However, quinone type cofactors change the interfacial proton transport when activated by redox reactions with ferrocene type molecules, such as decamethyl ferrocence (DMFc). Quinone type cofactors show distinct features in their impedance response assigned to a proton coupled electron transfer (PCET) process, different from the uncoupled proton transfer activity of dinitrophenol. The observed PCET reaction significantly changes τ-1 . We use τ-1 as a proton transport descriptor. In particular, CoQ10 -DMFc shows a τ-1 of 3.5 s-1 at pH 7, indicating how small-molecule assemblies change proton availability.

A single atom cobalt anchored MXene bifunctional platform for rapid, label-free and high-throughput biomarker analysis and tissue imaging

Few of single-atom materials have been served as platform to analyze small molecules for surface assisted laser desorption/ionization mass spectrometry (SALDI-MS). Herein, a novel single Co atom-anchored MXene (Co-N-Ti3C2) is prepared to achieve enhanced SALDI-MS and mass spectrometry imaging (MSI) performance for the first time. The Co-N-Ti3C2 films were prepared by a simple in situ self-assembly strategy to generate an efficient SALDI-MS platform. Compared to typical inorganic/organic matrices, Co-N-Ti3C2 films exhibit superior performance in small molecules detection with ultra-high sensitivity (LOD at amol level), excellent repeatability (CV <4%), clean background and wide analyte coverage, enabling accurate quantitative analysis of various low-concentration metabolites from 1 μL biofluid in seconds. Its usage efficiently enhanced SALDI-MS detection of various small-molecule biomarkers such as amino acids, succinic acid, itaconic acid, arachidonic acid, citrulline, prostaglandin E2, creatinine, uric acid, glutamine, D-mannose, cholesterol and inositol in positive ion mode. The blood glucose level in humans was successfully determined from a linearity concentration range (0.25-10 mM). Notably, the Co-N-Ti3C2 assisted SALDI-MSI enables study the spatial distribution of small molecules covering the range central to metabolomics at a high resolution on a tissue section. Furthermore, Co-N-Ti3C2 platform revealed a specific peak profile that distinguishes osteoarthritis (OA) from rheumatoid arthritis (RA) tissue. Density functional theory theoretical investigation revealed that single Co atoms anchored on Ti3C2 could highly enhanced the ionization ability of metabolites, resulting in high-sensitivity and heterogeneous metabolome coverage.

Protein-based bioactive coatings: from nanoarchitectonics to applications

Protein-based bioactive coatings have emerged as a versatile and promising strategy for enhancing the performance and biocompatibility of diverse biomedical materials and devices. Through surface modification, these coatings confer novel biofunctional attributes, rendering the material highly bioactive. Their widespread adoption across various domains in recent years underscores their importance. This review systematically elucidates the behavior of protein-based bioactive coatings in organisms and expounds on their underlying mechanisms. Furthermore, it highlights notable advancements in artificial synthesis methodologies and their functional applications in vitro. A focal point is the delineation of assembly strategies employed in crafting protein-based bioactive coatings, which provides a guide for their expansion and sustained implementation. Finally, the current trends, challenges, and future directions of protein-based bioactive coatings are discussed.

Nanobody-guided redox and enzymatic functionalization of icosahedral virus particles for enhanced bioelectrocatalysis

Icosahedral, 30 nm diameter, grapevine fanleaf virus (GFLV) virus particles are adsorbed onto electrodes and used as nanoscaffolds for the assembly of an integrated glucose oxidizing system, comprising the enzyme pyrroloquinoline quinone-glucose dehydrogenase (PQQ-GDH) and ferrocenylated polyethylene glycol chains (Fc-PEG) as a redox co-substrate. Two different GFLV-specific nanobodies, either fused to the enzyme, or chemically conjugated to Fc-PEG, are used for the regio-selective immunodecoration of the viral particles. A comprehensive kinetic characterization of the enzymatic function of the particles, initially decorated with the enzyme alone shows that simple immobilization on the GFLV capsid has no effect on the kinetic scheme of the enzyme, nor on its catalytic activity. However, we find that co-immobilization of the enzyme and the Fc-PEG co-substrate on GFLV does induce enzymatic enhancement, by promoting cooperativity between the two subunits of the homodimeric enzyme, via "synchronization" of their redox state. A decrease in inhibition of the enzyme by its substrate (glucose) is also observed.

Immobilizing white-rot fungi laccase: Toward bio-derived supports as a circular economy approach in organochlorine removal

Despite their high persistence in the environment, organochlorines (OC) are widely used in the pharmaceutical industry, in plastics, and in the manufacture of pesticides, among other applications. These compounds and the byproducts of their decomposition deserve attention and efficient proposals for their treatment. Among sustainable alternatives, the use of ligninolytic enzymes (LEs) from fungi stands out, as these molecules can catalyze the transformation of a wide range of pollutants. Among LEs, laccases (Lac) are known for their efficiency as biocatalysts in the conversion of organic pollutants. Their application in biotechnological processes is possible, but the enzymes are often unstable and difficult to recover after use, driving up costs. Immobilization of enzymes on a matrix (support or solid carrier) allows recovery and stabilization of this catalytic capacity. Agricultural residual biomass is a passive environmental asset. Although underestimated and still treated as an undesirable component, residual biomass can be used as a low-cost adsorbent and as a support for the immobilization of enzymes. In this review, the adsorption capacity and immobilization of fungal Lac on supports made from residual biomass, including compounds such as biochar, for the removal of OC compounds are analyzed and compared with the use of synthetic supports. A qualitative and quantitative comparison of the reported results was made. In this context, the use of peanut shells is highlighted in view of the increasing peanut production worldwide. The linkage of methods with circular economy approaches that can be applied in practice is discussed.

Advances in colorimetric biosensors of exosomes: novel approaches based on natural enzymes and nanozymes

Exosomes are 30-150 nm vesicles derived from diverse cell types, serving as one of the most important biomarkers for early diagnosis and prognosis of diseases. However, the conventional detection method for exosomes faces significant challenges, such as unsatisfactory sensitivity, complicated operation, and the requirement of complicated devices. In recent years, colorimetric exosome biosensors with a visual readout underwent rapid development due to the advances in natural enzyme-based assays and the integration of various types of nanozymes. These synthetic nanomaterials show unique physiochemical properties and catalytic abilities, enabling the construction of exosome colorimetric biosensors with novel principles. This review will illustrate the reaction mechanisms and properties of natural enzymes and nanozymes, followed by a detailed introduction of the recent advances in both types of enzyme-based colorimetric biosensors. A comparison between natural enzymes and nanozymes is made to provide insights into the research that improves the sensitivity and convenience of assays. Finally, the advantages, challenges, and future directions of enzymes as well as exosome colorimetric biosensors are highlighted, aiming at improving the overall performance from different approaches.

Protein nanoscaffold enables programmable nanobody-luciferase immunoassembly for sensitive and simultaneous detection of aflatoxin B1 and ochratoxin A

Mycotoxins produced by fungi can contaminate various foods and pose significant health risks. Ensuring food safety demands rapid, highly sensitive analytical techniques. One-step Bioluminescent Enzyme Immunoassays (BLEIAs) employing nanobody-nanoluciferase fusion proteins have recently garnered attention for operational simplicity and heightened sensitivity. Nevertheless, fixed nanobody:nanoluciferase ratios in fusion proteins restrict the customization and sensitivity of traditional BLEIAs. In this study, we present a Scaffold Assembly-based BLEIA (SA-BLEIA) that overcomes these limitations through the programmable conjugation of nanobodies and luciferases onto 60-meric protein nanoscaffolds using SpyTag/SpyCatcher linkages. These nanoscaffolds facilitate the adjustable coupling of anti-aflatoxin B1 and anti-ochratoxin A nanobodies with luciferases, optimizing nanobody/luciferase ratios and diversifying specificities. Compared to conventional methods, SA-BLEIA demonstrates considerably elevated sensitivity for detecting both toxins. The elevated local concentration of luciferase significantly amplifies bioluminescence intensity, permitting reduced substrate consumption and cost-effective detection. The usage of dual-nanobody conjugates facilitates the quantification or simultaneous detection of both mycotoxins in a single test with shared reagents. The assay exhibits exceptional recovery rates in spiked cereal samples, strongly correlating with outcomes from commercial ELISA kits. Overall, this adaptable, highly sensitive, cost-effective, and multiplexed immunoassay underscores the potential of tunable scaffold assembly as a promising avenue for advancing bioanalytical diagnostic tools.

Construction of molecular enrichment accelerators via assembly of enzyme surface grafted polymer and cyclodextrin achieving rapid and stable ester catalysis for biodiesel synthesis

Efficient and stable catalysis has always been the core concept of enzyme catalysis in industrial processes for manufacturing. Here, we constructed molecular enrichment accelerators to synergistically enhance enzyme activity and stability by assembling enzyme surface grafted polymer and cyclodextrin. At 40 °C, the enzyme activity of CalB-PNIPAM212/β-CD was 2.9 times that of CalB-PNIPAM212. The enzyme activity of CalB-PNIPAM428/γ-CD had reached 1.61 times that of CalB. At the same time, the stability of CalB-PNIPAM212/β-CD and CalB-PNIPAM428/γ-CD are slightly better than that of CalB under high temperature, organic solution and extreme pH conditions. The synergistic increase in activity and stability of the lipase-polymer assembly was achieved due to the structure of assembly, in which the role of cyclodextrin could enrich substrate affecting molecular diffusion. In addition, the lipase-polymer assembly proved to be an efficient catalyst for biodiesel synthesis, with a biodiesel conversion 1.4 times that of CalB at 60 °C. Therefore, this simple and low-cost lipase-polymer assembly provides new possibilities for the construction of high-efficiency industrial biocatalytic catalysts.

Acid-resistant enzymes: the acquisition strategies and applications

Enzymes have promising applications in chemicals, food, pharmaceuticals, and other variety products because of their high efficiency, specificity, and environmentally friendly properties. However, due to the complexity of raw materials, pH, temperature, solvents, etc., the application range of enzymes is greatly limited in the industry. Protein engineering and enzyme immobilization are classical strategies to overcome the limitations of industrial applications. Although the pH tendency of enzymes has been extensively researched, the mechanism underlying enzyme acid resistance is unclear, and a less practical strategy for altering the pH propensity of enzymes has been suggested. This review proposes that the optimum pH of enzyme is determined by the pKa values of active center ionizable amino acid residues. Three levels of acquiring acid-resistant enzymes are summarized: mining from extreme environments and enzyme databases, modification with protein engineering and enzyme microenvironment engineering, and de novo synthesis. The industrial applications of acid-resistant enzymes in chemicals, food, and pharmaceuticals are also summarized. KEY POINTS: • The mechanism of enzyme acid resistance is fundamentally determined. • The three aspects of the method for acquiring acid-resistant enzymes are summarized. • Computer-aided strategies and artificial intelligence are used to obtain acid-resistant enzymes.

Dynamic Fusion of Nucleic Acid Functionalized Nano-/Micro-Cell-Like Containments: From Basic Concepts to Applications

Membrane fusion processes play key roles in biological transformations, such as endocytosis/exocytosis, signal transduction, neurotransmission, or viral infections, and substantial research efforts have been directed to emulate these functions by artificial means. The recognition and dynamic reconfiguration properties of nucleic acids provide a versatile means to induce membrane fusion. Here we address recent advances in the functionalization of liposomes or membranes with structurally engineered lipidated nucleic acids guiding the fusion of cell-like containments, and the biophysical and chemical parameters controlling the fusion of the liposomes will be discussed. Intermembrane bridging by duplex or triplex nucleic acids and light-induced activation of membrane-associated nucleic acid constituents provide the means for spatiotemporal fusion of liposomes or nucleic acid modified liposome fusion with native cell membranes. The membrane fusion processes lead to exchange of loads in the fused containments and are a means to integrate functional assemblies. This is exemplified with the operation of biocatalytic cascades and dynamic DNA polymerization/nicking or transcription machineries in fused protocell systems. Membrane fusion processes of protocell assemblies are found to have important drug-delivery, therapeutic, sensing, and biocatalytic applications. The future challenges and perspectives of DNA-guided fused containments and membranes are addressed.

Electrospun nanofibers: promising nanomaterials for biomedical applications

With the rapid development of nanotechnology and nanomaterials science, electrospun nanofibers emerged as a new material with great potential for a variety of applications. Electrospinning is a simple and adaptable process for generation of nanofibers from a viscoelastic fluid using electrostatic repulsion between surface charges. Electrospinning has been used to manufacture nanofibers with low diameters from a wide range of materials. Electrospinning may also be used to construct nanofibers with a variety of secondary structures, including those having a porous, hollow, or core–sheath structure. Due to many attributes including their large specific surface area and high porosity, electrospun nanofibers are suitable for biosensing and environmental monitoring. This book chapter discusses the different methods of nanofiber preparations and the challenges involved, recent research progress in electrospun nanofibers, and the ways to commercialize these nanofiber materials.

A Compartmentalized Nanoreactor Formed by Interfacial Hydrogelation for Cascade Enzyme Catalytic Therapy

Some cellular enzymatic pathways are located within a single organelle, while most others involve enzymes that are located within multiple compartmentalized cellular organelles to realize the efficient multi-step enzymatic process. Herein, bioinspired by enzyme-mediated biosynthesis and biochemical defense, a compartmented nanoreactor (Burr-NCs@Gl^SOD ) was constructed through a self-confined catalysis strategy with burr defect-engineered molybdenum disulfide/Prussian blue analogues (MoS₂ /PBA) and an interfacial diffusion-controlled hydrogel network. The specific catalytic mechanism of the laccase-like superactivity induced hydrogelation and cascade enzyme catalytic therapy were explored. The confined hydrogelation strategy introduces a versatile means for nanointerface functionalization and provides insight into biological construction of simulated enzymes with comparable activity and also the specificity to natural enzymes.

MOF-Immobilized Two-in-One Engineered Enzymes Enhancing Activity of Biocatalytic Cascade for Tumor Therapy

Biocatalytic systems based on enzyme cascade reactions have attracted growing interest in the field of biocatalytic medicine. However, it is a major challenge to reasonably construct enzyme cascade reactions with high stability, selectivity, and catalytic efficiency for the in vivo biocatalytic application. Herein, two-in-one engineered glucose oxidase (GOx-Fe⁰ ) is fabricated by a biomineralization strategy, through which a nanozyme (Fe⁰ NP) is anchored within the inner cavity of GOx. Then, GOx-Fe⁰ is immobilized in a pH-sensitive metal-organic framework (MOF) zeolitic imidazolate framework-8 (ZIF-8) to establish a stable and effective MOF-immobilized two-in-one engineered enzyme, GOx-Fe⁰ @ZIF-8. In vitro studies show that GOx-Fe⁰ @ZIF-8 exhibits excellent stability and high pH/glucose selectivity, and the shorter spacing between cascade enzymes can increase the cascade throughput and effectively improve the reaction efficiency of the enzyme cascade. In vivo experiments exhibit that GOx-Fe⁰ @ZIF-8 solves the instability and systemic toxicity of free enzymes, and achieves deep tumor penetration and significant chemodynamic therapeutic efficacy through a pH/glucose-selective enzyme cascade reaction in tumor site. Taken together, such an orchestrated enzyme engineering strategy can effectively improve enzyme stability, selectivity, and enzyme cascade reaction efficiency via chemical transformations, and also provide a promising strategy for the application of biocatalytic cascade reactions in vivo.

The Story of the Little Blue Box: A Tribute to Siegfried Hünig

The tetracationic cyclophane, cyclobis(paraquat-p-phenylene), also known as the little blue box, constitutes a modular receptor that has facilitated the discovery of many host-guest complexes and mechanically interlocked molecules during the past 35 years. Its versatility in binding small π-donors in its tetracationic state, as well as forming trisradical tricationic complexes with viologen radical cations in its doubly reduced bisradical dicationic state, renders it valuable for the construction of various stimuli-responsive materials. Since the first reports in 1988, the little blue box has been featured in over 500 publications in the literature. All this research activity would not have been possible without the seminal contributions carried out by Siegfried Hünig, who not only pioneered the syntheses of viologen-containing cyclophanes, but also revealed their rich redox chemistry in addition to their ability to undergo intramolecular π-dimerization. This Review describes how his pioneering research led to the design and synthesis of the little blue box, and how this redox-active host evolved into the key component of molecular shuttles, switches, and machines.

Biocatalytic gateway to convert glycerol into 3-hydroxypropionic acid in waste-based biorefineries: Fundamentals, limitations, and potential research strategies

Microbial conversion of bioenergy-derived waste glycerol into value-added chemicals has emerged as an important bioprocessing technology due to its eco-friendliness, feasible technoeconomics, and potential to provide sustainability in biodiesel and bioethanol production. Glycerol is an abundant liquid waste from bioenergy plants with a projected volume of 6 million tons by 2025, accounting for about 10% of biodiesel and 2.5% of bioethanol yields. 3-Hydroxypropionic acid (3-HP) is a major product of glycerol bioconversion, which is the third largest biobased platform compound with expected market size and value of 3.6 million tons/year and USD 10 billion/year, respectively. Despite these biorefinery values, 3-HP biosynthesis from glycerol is still at an immature stage of commercial exploitation. The main challenges behind this immaturity are the toxic effects of 3-HPA on cells, the distribution of carbon flux to undesirable pathways, low tolerance of cells to glycerol and 3-HP, co-factor dependence of enzymes, low enzyme activity and stability, and the problems of substrate inhibition and specificity of enzymes. To address these challenges, it is necessary to understand the fundamentals of glycerol bioconversion and 3-HP production in terms of metabolic pathways, related enzymes, cell factories, midstream process configurations, and downstream 3-HP recovery, as discussed in this review critically and comprehensively. It is equally important to know the current challenges and limitations in 3-HP production, which are discussed in detail along with recent research efforts and remaining gaps. Finally, possible research strategies are outlined considering the recent technological advances in microbial biosynthesis, aiming to attract further research efforts to achieve a sustainable and industrially exploitable 3-HP production technology. By discussing the use of advanced tools and strategies to overcome the existing challenges in 3-HP biosynthesis, this review will attract researchers from many other similar biosynthesis technologies and provide a common gateway for their further development.

Plasmonic photothermal activation of an organosilica shielded cold-adapted lipase co-immobilised with gold nanoparticles on silica particles

Gold nanoparticles (AuNPs), owing to their intrinsic plasmonic properties, are widely used in applications ranging from nanotechnology and nanomedicine to catalysis and bioimaging. Capitalising on the ability of AuNPs to generate nanoscale heat upon optical excitation, we designed a nanobiocatalyst with enhanced cryophilic properties. It consists of gold nanoparticles and enzyme molecules, co-immobilised onto a silica scaffold, and shielded within a nanometre-thin organosilica layer. To produce such a hybrid system, we developed and optimized a synthetic method allowing efficient AuNP covalent immobilisation on the surface of silica particles (SPs). Our procedure allows to reach a dense and homogeneous AuNP surface coverage. After enzyme co-immobilisation, a nanometre-thin organosilica layer was grown on the surface of the SPs. This layer was designed to fulfil the dual function of protecting the enzyme from the surrounding environment and allowing the confinement, at the nanometre scale, of the heat diffusing from the AuNPs after surface plasmon resonance photothermal activation. To establish this proof of concept, we used an industrially relevant lipase enzyme, namely Lipase B from Candida Antarctica (CalB). Herein, we demonstrate the possibility to photothermally activate the so-engineered enzymes at temperatures as low as -10 °C.

Multiscale simulation-guided design of enzyme bioconjugates with enhanced catalysis

Biopolymer-scaffold modification is widely used to enhance enzyme catalysis. A central challenge is predicting the effects of scaffold position on enzyme properties. Here, we use a computational-experimental approach to develop a model for the effects of DNA scaffold position on enzyme kinetics. Using phosphotriesterase modified with a 20bp dsDNA, we demonstrate that conjugation position is as important as the scaffold's chemistry and structure. Multiscale simulations predict the effective substrate concentration increases close to the scaffold, which has μM-strength binding to the substrate. Kinetic analysis shows that the effective concentration that the scaffold provides is best utilized when positioned next to, but not blocking, the active site. At ~5Å distance between scaffold and active site a 7-fold increase in k cat /K M was achieved. A model that accounts for the substrate concentration as well PTE-DNA geometry accurately captures the kinetic enhancements, enabling prediction of the effect across a range of DNA positions.

Dynamic Catalysis Guided by Nucleic Acid Networks and DNA Nanostructures

Nucleic acid networks conjugated to native enzymes and supramolecular DNA nanostructures modified with enzymes or DNAzymes act as functional reaction modules for guiding dynamic catalytic transformations. These systems are exemplified with the assembly of constitutional dynamic networks (CDNs) composed of nucleic acid-functionalized enzymes, as constituents, undergoing triggered structural reconfiguration, leading to dynamically switched biocatalytic cascades. By coupling two nucleic acid/enzyme networks, the intercommunicated feedback-driven dynamic biocatalytic operation of the system is demonstrated. In addition, the tailoring of a nucleic acid/enzyme reaction network driving a dissipative, transient, biocatalytic cascade is introduced as a model system for out-of-equilibrium dynamically modulated biocatalytic transformation in nature. Also, supramolecular nucleic acid machines or DNA nanostructures, modified with DNAzyme or enzyme constituents, act as functional reaction modules driving temporal dynamic catalysis. The design of dynamic supramolecular machines is exemplified with the introduction of an interlocked two-ring catenane device that is dynamically reversibly switched between two states operating two different DNAzymes, and with the tailoring of a DNA-tweezers device functionalized with enzyme/DNAzyme constituents that guides the dynamic ON/OFF operation of a biocatalytic cascade by opening and closing the molecular device. In addition, DNA origami nanostructures provide functional scaffolds for the programmed positioning of enzymes or DNAzyme for the switchable operation of catalytic transformations. This is introduced by the tailored functionalization of the edges of origami tiles with nucleic acids guiding the switchable formation of DNAzyme catalysts through the dimerization/separation of the tiles. In addition, the programmed deposition of two-enzyme/cofactor constituents on the origami raft allowed the dynamic photochemical activation of the cofactor-mediated biocatalytic cascade on the spatially biocatalytic assembly on the scaffold. Furthermore, photoinduced "mechanical" switchable and reversible unlocking and closing of nanoholes in the origami frameworks allow the "ON" and "OFF" operation of DNAzyme units in the nanoholes, confined environments. The future challenges and potential applications of dynamic nucleic acid/enzyme and DNAzyme conjugates are discussed in the conclusion paragraph.

Is enzyme immobilization a mature discipline? Some critical considerations to capitalize on the benefits of immobilization

Enzyme immobilization has been developing since the 1960s and although many industrial biocatalytic processes use the technology to improve enzyme performance, still today we are far from full exploitation of the field. One clear reason is that many evaluate immobilization based on only a few experiments that are not always well-designed. In contrast to many other reviews on the subject, here we highlight the pitfalls of using incorrectly designed immobilization protocols and explain why in many cases sub-optimal results are obtained. We also describe solutions to overcome these challenges and come to the conclusion that recent developments in material science, bioprocess engineering and protein science continue to open new opportunities for the future. In this way, enzyme immobilization, far from being a mature discipline, remains as a subject of high interest and where intense research is still necessary to take full advantage of the possibilities.

Enzyme-Inspired Microenvironment Engineering of a Single-Molecular Heterojunction for Promoting Concerted Electrochemical CO2 Reduction

Challenges remain in the development of novel multifunctional electrocatalysts and their industrial operation on low-electricity pair-electrocatalysis platforms for the carbon cycle. Herein, an enzyme-inspired single-molecular heterojunction electrocatalyst ((NH_x )₁₆ -NiPc/CNTs) with specific atomic nickel centers and amino-rich local microenvironments for industrial-level electrochemical CO₂ reduction reaction (eCO₂ RR) and further energy-saving integrated CO₂ electrolysis is designed and developed. (NH_x )₁₆ -NiPc/CNTs exhibit unprecedented catalytic performance with industry-compatible current densities, ≈100% Faradaic efficiency and remarkable stability for CO₂ -to-CO conversion, outperforming most reported catalysts. In addition to the enhanced CO₂ capture by chemisorption, the sturdy deuterium kinetic isotope effect and proton inventory studies sufficiently reveal that such distinctive local microenvironments provide an effective proton ferry effect for improving local alkalinity and proton transfer and creating local interactions to stabilize the intermediate, ultimately enabling the high-efficiency operation of eCO₂ RR. Further, by using (NH_x )₁₆ -NiPc/CNTs as a bifunctional electrocatalyst in a flow cell, a low-electricity overall CO₂ electrolysis system coupling cathodic eCO₂ RR with anodic oxidation reaction is developed to achieve concurrent feed gas production and sulfur recovery, simultaneously decreasing the energy input. This work paves the new way in exploring molecular electrocatalysts and electrolysis systems with techno-economic feasibility.

Structure-based rational design of hydroxysteroid dehydrogenases for improving and diversifying steroid synthesis

A group of steroidogenic enzymes, hydroxysteroid dehydrogenases are involved in steroid metabolism which is very important in the cell: signaling, growth, reproduction, and energy homeostasis. The enzymes show an inherent function in the interconversion of ketosteroids and hydroxysteroids in a position- and stereospecific manner on the steroid nucleus and side-chains. However, the biocatalysis of steroids reaction is a vital and demanding, yet challenging, task to produce the desired enantiopure products with non-natural substrates or non-natural cofactors, and/or in non-physiological conditions. This has driven the use of protein design strategies to improve their inherent biosynthetic efficiency or activate their silent catalytic ability. In this review, the innate features and catalytic characteristics of enzymes based on sequence-structure-function relationships of steroidogenic enzymes are reviewed. Combining structure information and catalytic mechanisms, progress in protein redesign to stimulate potential function, for example, substrate specificity, cofactor dependence, and catalytic stability are discussed.

Machine Learning on a Robotic Platform for the Design of Polymer-Protein Hybrids

Polymer-protein hybrids are intriguing materials that can bolster protein stability in non-native environments, thereby enhancing their utility in diverse medicinal, commercial, and industrial applications. One stabilization strategy involves designing synthetic random copolymers with compositions attuned to the protein surface, but rational design is complicated by the vast chemical and composition space. Here, a strategy is reported to design protein-stabilizing copolymers based on active machine learning, facilitated by automated material synthesis and characterization platforms. The versatility and robustness of the approach is demonstrated by the successful identification of copolymers that preserve, or even enhance, the activity of three chemically distinct enzymes following exposure to thermal denaturing conditions. Although systematic screening results in mixed success, active learning appropriately identifies unique and effective copolymer chemistries for the stabilization of each enzyme. Overall, this work broadens the capabilities to design fit-for-purpose synthetic copolymers that promote or otherwise manipulate protein activity, with extensions toward the design of robust polymer-protein hybrid materials.

The presence and role of the intermediary CO reservoir in heterogeneous electroreduction of CO2

SignificanceThe electroconversion of CO2 to value-added products is a promising path to sustainable fuels and chemicals. However, the microenvironment that is created during CO2 electroreduction near the surface of heterogeneous Cu electrocatalysts remains unknown. Its understanding can lead to the development of ways to improve activity and selectivity toward multicarbon products. This work introduces a method called on-stream substitution of reactant isotope that provides quantitative information of the CO intermediate species present on Cu surfaces during electrolysis. An intermediary CO reservoir that contains more CO molecules than typically expected in a surface adsorbed configuration was identified. Its size was shown to be a factor closely associated with the formation of multicarbon products.

Colorimetric and Fluorescence Dual-Mode Biosensors Based on Peroxidase-Like Activity of the Co3O4 Nanosheets

The mimic enzyme has become a research hotspot in recent years because of its advantages of high stability, convenient preparation, and low price. In this article, Co₃O₄ nanosheets synthesized by a simple hydrothermal method possess the characteristics of a peroxidase-like activity. The results demonstrated that 3,3′,5,5′-Tetramethylbenzidine (TMB) could be oxidized by H₂O₂ to produce a typical blue product (oxTMB) which has a strong absorption at 650 nm wavelength with the help of the Co₃O₄ nanosheets. Thus, a simple and sensitive colorimetric detection method for H₂O₂ was established with a good linear relationship (2–200 μM) and a low limit of detection (0.4 μM). Meanwhile, the colorimetric product can effectively quench the fluorescence emitted by Ru(bpy)₃²⁺. Therefore, a colorimetric and fluorescence dual detection mode photochemical sensor for H₂O₂ detection is constructed based on the principle of the inner filter effect (IFE) between the colorimetric product (oxTMB) and Ru(bpy)₃²⁺. It can effectively avoid the false positive problem of a single detection mode. In the presence of glucose oxidase, glucose can be catalyzed to produce gluconic acid and H₂O₂; therefore, the sensor can also be used for the determination of glucose with a good linear relationship (0.02–2 μM) and a low limit of detection (5 nM). Experimental results showed that the sensor has a high sensitivity and strong anti-interference ability which can be used for the detection of actual samples.

Bioprospecting of microbial enzymes: current trends in industry and healthcare

Microbial enzymes have an indispensable role in producing foods, pharmaceuticals, and other commercial goods. Many novel enzymes have been reported from all domains of life, such as plants, microbes, and animals. Nonetheless, industrially desirable enzymes of microbial origin are limited. This review article discusses the classifications, applications, sources, and challenges of most demanded industrial enzymes such as pectinases, cellulase, lipase, and protease. In addition, the production of novel enzymes through protein engineering technologies such as directed evolution, rational, and de novo design, for the improvement of existing industrial enzymes is also explored. We have also explored the role of metagenomics, nanotechnology, OMICs, and machine learning approaches in the bioprospecting of novel enzymes. Overall, this review covers the basics of biocatalysts in industrial and healthcare applications and provides an overview of existing microbial enzyme optimization tools. KEY POINTS: • Microbial bioactive molecules are vital for therapeutic and industrial applications. • High-throughput OMIC is the most proficient approach for novel enzyme discovery. • Comprehensive databases and efficient machine learning models are the need of the hour to fast forward de novo enzyme design and discovery.

Cascaded Enzyme Reactions over a Three-Dimensional, Wireframe DNA Origami Scaffold

DNA nanotechnology has increasingly been used as a platform to scaffold enzymes based on its unmatched ability to structure enzymes in a desired format. The capability to organize enzymes has taken many forms from more traditional 2D pairings on individual scaffolds to recent works introducing enzyme organizations in 3D lattices. As the ability to define nanoscale structure has grown, it is critical to fully deconstruct the impact of enzyme organization at the single-scaffold level. Here, we present an open, three-dimensional (3D) DNA wireframe octahedron which is used to create a library of spatially arranged organizations of glucose oxidase and horseradish peroxidase. We explore the contribution of enzyme spacing, arrangement, and location on the 3D scaffold to cascade activity. The experiments provide insight into enzyme scaffold design, including the insignificance of scaffold sequence makeup on activity, an increase in activity at small enzyme spacings of <10 nm, and activity changes that arise from discontinuities in scaffold architecture. Most notably, the experiments allow us to determine that enzyme colocalization itself on the DNA scaffold dominates over any specific enzyme arrangement.

Enzymatic activity of individual bioelectrocatalytic viral nanoparticles: dependence of catalysis on the viral scaffold and its length

The enzymatic activity of tobacco mosaic virus (TMV) nanorod particles decorated with an integrated electro-catalytic system, comprising the quinoprotein glucose-dehydrogenase (PQQ-GDH) enzyme and ferrocenylated PEG chains as redox mediators, is probed at the individual virion scale by atomic force microscopy-scanning electrochemical atomic force microscopy (AFM-SECM). A marked dependence of the catalytic activity on the particle length is observed. This finding can be explained by electron propagation along the viral backbone, resulting from electron exchange between ferrocene moieties, coupled with enzymatic catalysis. Thus, the use of a simple 1D diffusion/reaction model allows the determination of the kinetic parameters of the virus-supported enzyme. Comparative analysis of the catalytic behavior of the Fc-PEG/PQQ-GDH system assembled on two differing viral scaffolds, TMV (this work) and bacteriophage-fd (previous work), reveals two distinct kinetic effects of scaffolding: An enhancement of catalysis that does not depend on the virus type and a modulation of substrate inhibition that depends on the virus type. AFM-SECM detection of the enzymatic activity of a few tens of PQQ-GDH molecules, decorating a 40 nm-long viral domain, is also demonstrated, a record in terms of the lowest number of enzyme molecules interrogated by an electrochemical imaging technique.

Hierarchically encapsulating enzymes with multi-shelled metal-organic frameworks for tandem biocatalytic reactions

Biocatalytic transformations in living organisms, such as multi-enzyme catalytic cascades, proceed in different cellular membrane-compartmentalized organelles with high efficiency. Nevertheless, it remains challenging to mimicking biocatalytic cascade processes in natural systems. Herein, we demonstrate that multi-shelled metal-organic frameworks (MOFs) can be used as a hierarchical scaffold to spatially organize enzymes on nanoscale to enhance cascade catalytic efficiency. Encapsulating multi-enzymes with multi-shelled MOFs by epitaxial shell-by-shell overgrowth leads to 5.8~13.5-fold enhancements in catalytic efficiencies compared with free enzymes in solution. Importantly, multi-shelled MOFs can act as a multi-spatial-compartmental nanoreactor that allows physically compartmentalize multiple enzymes in a single MOF nanoparticle for operating incompatible tandem biocatalytic reaction in one pot. Additionally, we use nanoscale Fourier transform infrared (nano-FTIR) spectroscopy to resolve nanoscale heterogeneity of vibrational activity associated to enzymes encapsulated in multi-shelled MOFs. Furthermore, multi-shelled MOFs enable facile control of multi-enzyme positions according to specific tandem reaction routes, in which close positioning of enzyme-1-loaded and enzyme-2-loaded shells along the inner-to-outer shells could effectively facilitate mass transportation to promote efficient tandem biocatalytic reaction. This work is anticipated to shed new light on designing efficient multi-enzyme catalytic cascades to encourage applications in many chemical and pharmaceutical industrial processes.

Mimicking multi-enzyme catalytic cascades in natural systems with spatial organization in confined structures is gaining increasing attention in the emerging field of systems chemistry. Here, the authors demonstrate that multi-shelled metal-organic frameworks can be used as a hierarchical scaffold to spatially organize enzymes on nanoscale to enhance cascade catalytic efficiency.

Simulation design of natural enzyme binding pocket structure in MOFs for enhanced catalytic activity

This study confirms the activity gap between MOFs (Fe) and horseradish peroxidase can be bridged by simulating the binding pocket structure and adding active center. The customized structure promoted the...

Phospholipids (PLs) know-how: exploring and exploiting phospholipase D for its industrial dissemination

Owing to their numerous nutritional and bioactive functions, phospholipids (PLs), which are major components of biological membranes in all living organisms, have been widely applied as nutraceuticals, food supplements, and cosmetic ingredients. To date, PLs are extracted solely from soybean or egg yolk, despite the diverse market demands and high cost, owing to a tedious and inefficient manufacturing process. A microbial-based manufacturing process, specifically phospholipase D (PLD)-based biocatalysis and biotransformation process for PLs, has the potential to address several challenges associated with the soybean- or egg yolk-based supply chain. However, poor enzyme properties and inefficient microbial expression systems for PLD limit their wide industrial dissemination. Therefore, sourcing new enzyme variants with improved properties and developing advanced PLD expression systems are important. In the present review, we systematically summarize recent achievements and trends in the discovery, their structural properties, catalytic mechanisms, expression strategies for enhancing PLD production, and its multiple applications in the context of PLs. This review is expected to assist researchers to understand current advances in this field and provide insights for further molecular engineering efforts toward PLD-mediated bioprocessing.

Applications of DNA-Functionalized Proteins

As an important component that constitutes all the cells and tissues of the human body, protein is involved in most of the biological processes. Inspired by natural protein systems, considerable efforts covering many discipline fields were made to design artificial protein assemblies and put them into application in recent decades. The rapid development of structural DNA nanotechnology offers significant means for protein assemblies and promotes their application. Owing to the programmability, addressability and accurate recognition ability of DNA, many protein assemblies with unprecedented structures and improved functions have been successfully fabricated, consequently creating many brand-new researching fields. In this review, we briefly introduced the DNA-based protein assemblies, and highlighted the limitations in application process and corresponding strategies in four aspects, including biological catalysis, protein detection, biomedicine treatment and other applications.

Hierarchical micro- and mesoporous ZIF-8 with core-shell superstructures using colloidal metal sulfates as soft templates for enzyme immobilization

Metal-organic frameworks (MOFs), with large specific surface area and tunable porosity, have gained lots of attention for immobilizing enzymes. However, the intrinsic open channels of most reported MOFs are generally smaller than 2 nm, which significantly prevents the passage of enzymes, and the diffusion efficiency of substrates and products. Here we report a new hierarchical micro-mesoporous zeolitic imidazolate framework-8 (ZIF-8) with core-shell superstructure (HZIF-8) using colloidal hydrated zinc sulfate (ZnSO₄·7H₂O) as a soft template for enzyme immobilization. The ZnSO₄·7H₂O forms an aggregation of colloids due to the self-conglobation effect in methanol, which affords a soft template for the formation of HZIF-8. Cytochrome C (Cyt C) was immobilized in interior of HZIF-8 through entrapment during the formation of HZIF-8. The resultant immobilized Cyt C (Cyt C@HZIF-8) exhibited 4-fold and 3-fold higher activity than free Cyt C and Cyt C encapsulated in conventional microporous ZIF-8 (Cyt C@ZIF-8), respectively. Meanwhile, the Km value of Cyt C@HZIF-8 significantly decreased due to the presence of mesopores compared with Cyt C@ZIF-8, indicating enhanced substrate affinity. After 7 cycles, Cyt C@HZIF-8 still maintained 70% of its initial activity whereas Cyt C@ZIF-8 only retained 10% of its initial activity. Moreover, the obtained HZIF-8 showed outstanding performance in co-immobilization of multi-enzyme for the detection of glucose.

Structurally Engineered Light-Responsive Nanozymes for Enhanced Substrate Specificity

Mimicking enzyme specificity via construction of on-demand geometric structures on nanozymes is of great interest in recent years. Although building substrate-specific polymers on nanozymes has achieved great success, polymer-blocked active sites would inevitably lead to decreased activity of nanozymes. Here, we have developed three photoactive metal-organic framework (MOF)-based nanozymes (called 2D-TCPP, 3D-TCPP, and AD-TCPP), which have different geometric structures as well as unshielded active sites. Together with their structural variations and excellent photoresponsive oxidase-like activities, these photoactive nanozymes exhibit structure-dependent specificity for three kinds of substrates (typical oxidase substrates, organic pollutants, and antioxidants). Moreover, AD-TCPP and 3D-TCPP show potential applications for environmental protection and bioanalysis, respectively. This work offers a promising approach to the development of nanozymes with enzyme-like specificity.

Multienzyme nanoassemblies: from rational design to biomedical applications

Multienzyme nanoassemblies (MENAs) that combine the functions of several enzymes into one entity have attracted widespread research interest due to their improved enzymatic performance and great potential for multiple applications. Considerable progress has been made to design and fabricate MENAs in recent years. This review begins with an introduction of the up-to-date strategies in designing MENAs, mainly including substrate channeling, compartmentalization and control of enzyme stoichiometry. The desirable properties that endow MENAs with important applications are also discussed in detail. Then, the recent advances in utilizing MENAs in the biomedical field are reviewed, with a particular focus on biosensing, tumor therapy, antioxidant and drug delivery. Finally, the challenges and perspectives for development of versatile MENAs are summarized.