Carbon nitrides and metal nanoparticles: from controlled synthesis to design principles for improved photocatalysis

Red light enhances the antibacterial properties, biofabrication, and stability of Fagonia indica callus-based silver nanoparticles

Plant-based nanoparticles can be tuned through the frequency of light for efficient synthesis, structural properties, and antibacterial applications. This research assessed the effect of material type (callus and whole-plant extract) and the interaction with a specific range of light wavelength on AgNP synthesis. All types of AgNPs were characterized by their size, shape, associated functional groups, and surface charge. Interestingly, the size of red light and callus-based AgNPs (RC-AgNPs) was smaller (6.32 nm) compared to 14.59 nm for Ultraviolet light and callus-based AgNPs (UV-C-AgNPs). Zeta potential analysis showed that RC-AgNPs had higher stability (-29.2 mV) compared to UV-C-AgNPs (-16.7 mV). Similarly, red light-based AgNPs had higher Oxidation reduction potential in both whole-plant-based and callus-based AgNPs, indicating a more oxidizing nature compared to those synthesized under UV light. This was confirmed by the lower total phenolic and flavonoid content associated with them and their lower antioxidant activity. The higher antibacterial activities and lower minimum inhibitory concentrations of red light-based AgNPs against highly resistant pathogenic bacteria demonstrated the role of red light in enhancing antibacterial activity. These results indicate that AgNPs synthesized in red light and callus extract are more active compared to those synthesized under other wavelengths and/or in whole-plant extracts.

Exploring the surface plasmon catalytic reactions mechanism by three-phase interface modification combining with in-situ EC-SERS methods

Local surface plasmon resonance (LSPR) is a novel catalytic technique that has emerged in recent years, especially in the catalysis of aromatic amine compounds. However, the response process and mechanism are still unclear in current study. In the current field of study, the response process and mechanism are still unclear. In this work, the gas-liquid-solid three-phase interface (GLSTI) was innovatively utilized in this study to validate the reaction mechanism by surface-enhanced Raman spectroscopy. P-Aminothiophenol (PATP) and P-Phenylenediamine (PDA) underwent a surface plasmon-catalyzed reaction by using a silver nano-dendrites substrate with strong SERS activity. The GLSTI significantly facilitates the occurrence of surface plasmon catalytic reactions, which can supply enough oxygen by providing three-phase points. In situ SERS and EC-SERS technologies were combined in this study for the explorations. Therefore, this work is dedicated to deepening the exploration and expanding into new directions in plasmon-induced catalytic reactions.

Embedding electronic perpetual motion into single-atom catalysts for persistent Fenton-like reactions

In our quest to leverage the capabilities of the emerging single-atom catalysts (SACs) for wastewater purification, we confronted fundamental challenges related to electron scarcity and instability. Through meticulous theoretical calculations, we identified optimal placements for nitrogen vacancies (Nv) and iron (Fe) single-atom sites, uncovering a dual-site approach that significantly amplified visible-light absorption and charge transfer dynamics. Informed by these computational insights, we cleverly integrated Nv into the catalyst design to boost electron density around iron atoms, yielding a potent and flexible photoactivator for benign peracetic acid. This exceptional catalyst exhibited remarkable stability and effectively degraded various organic contaminants over 20 cycles with self-cleaning properties. Specifically, the Nv sites captured electrons, enabling their swift transfer to adjacent Fe sites under visible light irradiation. This mechanism accelerated the reduction of the formed "peracetic acid-catalyst" intermediate. Theoretical calculations were used to elucidate the synergistic interplay of dual mechanisms, illuminating increased adsorption and activation of reactive molecules. Furthermore, electron reduction pathways on the conduction band were elaborately explored, unveiling the production of reactive species that enhanced photocatalytic processes. A six-flux model and associated parameters were also applied to precisely optimize the photocatalytic process, providing invaluable insights for future photocatalyst design. Overall, this study offers a molecule-level insight into the rational design of robust SACs in a photo-Fenton-like system, with promising implications for wastewater treatment and other high-value applications.

Preconcentration and selective extraction of trace Hg(ii) by polymeric g-C3N4 nanosheet-packed SPE column

In this study, we successfully synthesized polymeric graphitic carbon nitride (g-C3N4) nanosheets through thermal means and proposed their application in solid-phase extraction (SPE) for the enrichment of trace Hg(ii). The nanosheets underwent characterization using scanning electron microscopy, tunnelling electron microscopy, and energy-dispersive X-ray spectroscopy. The column packed with polymeric carbon nitride nanosheets demonstrated effective extraction of trace Hg(ii) ions from complex samples. The g-C3N4 nanosheets possess a zeta potential value of -20 mV, enabling strong interaction with positively charged divalent Hg(ii) ions. This interaction leads to the formation of stable chelates with the nitrogen atoms present in the polytriazine and heptazine units of the material. The proposed method exhibited a high preconcentration limit of 0.33 μg L-1, making it suitable for analysing trace amounts of Hg(ii) ions. Moreover, the method's applicability was confirmed through successful analysis of real samples, achieving an impressive preconcentration factor of 200. The detection limit for trace Hg(ii) ions was determined to be 0.6 μg L-1. To assess the accuracy of the method, we evaluated its performance by recovering spiked amounts of Hg(ii) and by analysing certified reference materials. The results indicated excellent precision, with RSD consistently below 5% for all the analyses conducted. In conclusion, the thermally synthesized polymeric carbon nitride nanosheets present a promising approach for solid-phase extraction and preconcentration of trace Hg(ii) from real samples. The method showcases high efficiency, sensitivity, and accuracy, making it a valuable tool for environmental and analytical applications.

Fabrication of next-generation multifunctional LBG-s-AgNPs@ g-C3N4 NS hybrid nanostructures for environmental applications

Toxic industrial wastes and microbial pathogens in water pose a continuous threat to aquatic life as well as alarming situations for humans. Developing advanced materials with an environmentally friendly approach is always preferable for heterogeneous visible light photocatalysis. As a green reducing tool, LBG-s-AgNPs@ g-C3N4 NS hybrid nanostructures were anchored onto graphitic carbon nitride (g-C3N4) using an environmentally friendly approach of anchoring/decorating AgNPs onto g-C3N4. With the help of advanced techniques, the fabricated hybrid nanostructures were characterized. Using a sheet like matrix of g-C3N4, nanosized and well-defined uniform AgNPs displayed good antibacterial activity as well as superior photodegradation of hazardous dyes, including methylene blue (MB) and Rhodamine B (RhB). Based on the disc diffusion method, three pathogenic microorganisms of clinical significance can be identified by showing the magnitude of their susceptibility. As a result, the following antimicrobial potency was obtained: E. coli ≥ M. luteus ≥ S. aureus. In this study, green synthesized (biogenic) AgNPs decorated with g-C3N4 were found to be more potent antimicrobials than traditional AgNPs. Under visible light irradiation, LBG-s-AgNPs@g-C3N4 NS (0.01 M) demonstrated superior photocatalytic performance: ∼100% RhB degradation and ∼99% of MB degradation in 160 min. LBG-s-AgNPs@g-C3N4 NS showed the highest kinetic rate, 3.44 × 10-2 min-1, which is 27.74 times for the control activity in case of MB dye. While in case of RhB dye LBG-s-AgNPs@g-C3N4 NS showed the highest kinetic rate, 2.26 × 10-2 min-1, which is 17.51 times for the control activity. Due to the surface plasmon resonance (SPR) and reduction in recombination of the electrons and holes generated during photocatalysis, anchoring AgNPs to g-C3N4 further enhanced the photocatalytic degradation of dyes. Using this photocatalyst, hazardous dyes can be efficiently and rapidly degraded, allowing it to be applied for wastewater treatment contaminated with dyes. It also showed remarkable antimicrobial activity towards Gram-ve/Gram + ve pathogens.

Size Effect of Cu Nanoparticles in Cu/g-C3N4 Composites on Properties for Highly Efficient Photocatalytic Reduction of CO2 to Methanol

The main goal of this work is to develop cheap photocatalysts for the efficient photocatalytic reduction of CO2 to methanol with water. A series of composites of Cu/g-C3N4 were prepared via a solvothermal method. Copper nanoparticle (Cu NP) size in Cu/g-C3N4 can be easily controlled by adjusting the synthesis temperature. The Cu/g-C3N4 material with the proper size of Cu NP (CuCN-100) had the best photocatalytic property (675 μmol·g-1·h-1) in reducing the amount of CO2 to methanol at room temperature under normal pressure. The particle size of Cu NPs is the key factor to improve the catalytic activity and stability because of the improved transfer and separation of photogenerated charges with the small Cu NPs. Although the sample with large Cu NPs (CuCN-200) initially gave a better activity than that of CuCN-100 due to the formation of double heterojunction, its activity was thoroughly lost after two runs resulting from the continuous photocorrosion. This work provides a valuable insight for preparing efficient semiconductor-metal photocatalysts.

Tailored Energy Funneling in Photocatalytic π-Conjugated Polymer Nanofibers for High-Performance Hydrogen Production

The creation of artificial high-performance photosynthetic assemblies with a tailorable antenna system to deliver absorbed solar energy to a photosynthetic reaction center, thereby mimicking biological photosynthesis, remains a major challenge. We report the construction of recyclable, high-performance photosynthetic nanofibers with a crystalline π-conjugated polyfluorene core as an antenna system that funnels absorbed solar energy to spatially defined sensitized Co(II) porphyrin photocatalysts for the hydrogen evolution reaction. Highly effective energy funneling was achieved by tuning the dimensions of the nanofibers to exploit the very long exciton diffusion lengths (>200 nm) associated with the highly crystalline polyfluorene core formed using the living crystallization-driven self-assembly seeded growth method. This enabled efficient solar light-driven hydrogen production from water with a turnover number of over 450 for 8 h of irradiation, an H2 production rate of ca. 65 mmol h-1 g-1, and an overall quantum yield of 0.4% in the wavelength region (<405 nm) beyond the absorption of the molecular photocatalyst. The strategy of using a tailored antenna system based on π-conjugated polymers and maximizing exciton transport to a reaction center reported in this work opens up future opportunities for potential applications in other fields such as solar overall water splitting, CO2 reduction, and photocatalytic small molecule synthesis.

Improved Plasmonic Hot-Electron Capture in Au Nanoparticle/Polymeric Carbon Nitride by Pt Single Atoms for Broad-Spectrum Photocatalytic H2 Evolution

Rationally designing broad-spectrum photocatalysts to harvest whole visible-light region photons and enhance solar energy conversion is a "holy grail" for researchers, but is still a challenging issue. Herein, based on the common polymeric carbon nitride (PCN), a hybrid co-catalysts system comprising plasmonic Au nanoparticles (NPs) and atomically dispersed Pt single atoms (PtSAs) with different functions was constructed to address this challenge. For the dual co-catalysts decorated PCN (PtSAs-Au2.5/PCN), the PCN is photoexcited to generate electrons under UV and short-wavelength visible light, and the synergetic Au NPs and PtSAs not only accelerate charge separation and transfer though Schottky junctions and metal-support bond but also act as the co-catalysts for H2 evolution. Furthermore, the Au NPs absorb long-wavelength visible light owing to its localized surface plasmon resonance, and the adjacent PtSAs trap the plasmonic hot-electrons for H2 evolution via direct electron transfer effect. Consequently, the PtSAs-Au2.5/PCN exhibits excellent broad-spectrum photocatalytic H2 evolution activity with the H2 evolution rate of 8.8 mmol g-1 h-1 at 420 nm and 264 μmol g-1 h-1 at 550 nm, much higher than that of Au2.5/PCN and PtSAs-PCN, respectively. This work provides a new strategy to design broad-spectrum photocatalysts for energy conversion reaction.

Recent Advances in Graphitic Carbon Nitride Based Electro-Catalysts for CO2 Reduction Reactions

The electrocatalytic carbon dioxide reduction reaction is an effective means of combating the greenhouse effect caused by massive carbon dioxide emissions. Carbon nitride in the graphitic phase (g-C₃N₄) has excellent chemical stability and unique structural properties that allow it to be widely used in energy and materials fields. However, due to its relatively low electrical conductivity, to date, little effort has been made to summarize the application of g-C₃N₄ in the electrocatalytic reduction of CO₂. This review focuses on the synthesis and functionalization of g-C₃N₄ and the recent advances of its application as a catalyst and a catalyst support in the electrocatalytic reduction of CO₂. The modification of g-C₃N₄-based catalysts for enhanced CO₂ reduction is critically reviewed. In addition, opportunities for future research on g-C₃N₄-based catalysts for electrocatalytic CO₂ reduction are discussed.

Carbon-Hybridized Hydroxides for Energy Conversion and Storage: Interface Chemistry and Manufacturing

Carbon-hybridized hydroxides (CHHs) have been intensively investigated for uses in the energy conversion/storage fields. Nevertheless, the intrinsic structure-activity relationships between carbon and hydroxides within CHHs are still blurry, which hinders the fine modulation of CHHs in terms of practical applications to some degree. This review aims to figure out the intrinsic role of carbon materials in CHHs with a focus on the interface chemistry and the engineering strategy in-between two components. The fundamental effects of the carbon materials in enhancing the charge/mass transfer kinetics are first analyzed, particularly the extra electron pathways for fast charge transfer and the anchoring sites for boosting the mass transfer. Subsequently, the surface-guided/confined effects of carbon materials in CHHs to modify the morphology and tailor the hydroxides, and functional heterojunction for regulating the inner electronic structure are decoupled. The methods to efficiently construct a stable yet robust solid-solid heterointerface are summarized, including oxygen functional groups engrafting, topological defective sites construction and heteroatom incorporation to activate the inert carbon surface. The smart CHHs in some typical energy applications are demonstrated. Additionally, the methodologies that can reveal the hybridization electron configuration between two components are summed up. At last, the perspective and challenges faced by the CHHs for energy-related applications are outlined.

Efficient photo-assisted Fenton-like reaction of yolk-shell CuSe(Cu2Se)/g-C3N4 heterojunctions for methylene blue degradation

Herein, a CuSe(Cu₂Se) yolk-shell structure (CC) was synthesized when room temperature was 25 degree Celsius using Cu₂O as a soft template, and the g-C₃N₄/CuSe(Cu₂Se) heterojunction (CC-G) was formed by coupling appropriate amounts of g-C₃N₄ in the selenization process to provide a novel, green, economical, and efficient photo-Fenton catalytic material. Photo-Fenton degradation experiments proved that in the presence of hydrogen peroxide (H₂O₂), a small amount of g-C₃N₄ hybridization on Cu-based Fenton catalysts significantly improved methylene blue (MB) degradation. The suitable amount of g-C₃N₄ hybridization was selected according to the degradation efficiency. The mass of g-C₃N₄ constituted 20% of the mass of the Cu₂O soft template. The composite material prepared using this combination (CC-G-20) exhibited the best MB degradation performance. The MB degradation efficiency in the CC-G-20/H₂O₂/visible light system was almost 98.3% after 60 min, which is higher than those of the parent materials (g-C₃N₄, 12.7%; CC, 58.6%) and had cyclic stability. The catalytic system can also stably degrade MB under dark conditions, where the MB degradation was almost 82% after 60 min. The heterojunction prevented excessive electrons and holes (e ^- and h⁺) recombination, stabilizing the reactive active substance of hydroxyl in the photo-Fenton-like catalytic system. Electron paramagnetic resonance and photoluminescence experiments confirmed this inference.

Fusarium oxysporum; its enhanced entomopathogenic activity with acidic silver nanoparticles against Rhipicephalus microplus ticks

Fusarium oxysporum is an entomopathogenic fungus, and it has anti-biological activity against arthropods. Ticks are blood sucking arthropods which are responsible for transmitting different diseases in humans and animals. The use of chemical insecticides against ticks is not eco-friendly option and results in the development of acaricide resistance. Previously, we had cultured a local isolate of Fusarium oxysporum from soil samples which were identified through microscopy and confirmed through molecular technique. In our previous experiments, we have prepared Silver nanoparticles (AgNP) at pH 7 and they had been characterized through X-Ray Diffraction (XRD), UV-visible and zeta-potential. In our current study, the AgNP were prepared at different pH conditions and characterized through Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The protein molecules of F. oxysporum were charged with Ag ions. F. oxysporum NP were observed to enhance anti-biological activity by killing Rhipicephalus microplus and they caused 100% mortality at pH 4 and pH 5 in 24 h in anti-tick biological assay. Our study is the first report to do biological assay against Rhipicehalus ticks by using Fusarium AgNP at acidic pH. Biological control using entomopathogenic fungi can be the best alternative of the chemical method to control the tick population.

Design of the Synergistic Rectifying Interfaces in Mott-Schottky Catalysts

The functions of interfacial synergy in heterojunction catalysts are diverse and powerful, providing a route to solve many difficulties in energy conversion and organic synthesis. Among heterojunction-based catalysts, the Mott-Schottky catalysts composed of a metal-semiconductor heterojunction with predictable and designable interfacial synergy are rising stars of next-generation catalysts. We review the concept of Mott-Schottky catalysts and discuss their applications in various realms of catalysis. In particular, the design of a Mott-Schottky catalyst provides a feasible strategy to boost energy conversion and chemical synthesis processes, even allowing realization of novel catalytic functions such as enhanced redox activity, Lewis acid-base pairs, and electron donor-acceptor couples for dealing with the current problems in catalysis for energy conversion and storage. This review focuses on the synthesis, assembly, and characterization of Schottky heterojunctions for photocatalysis, electrocatalysis, and organic synthesis. The proposed design principles, including the importance of constructing stable and clean interfaces, tuning work function differences, and preparing exposable interfacial structures for designing electronic interfaces, will provide a reference for the development of all heterojunction-type catalysts, electrodes, energy conversion/storage devices, and even super absorbers, which are currently topics of interest in fields such as electrocatalysis, fuel cells, CO₂ reduction, and wastewater treatment.

Plasmonic Nanozymes: Leveraging Localized Surface Plasmon Resonance to Boost the Enzyme-Mimicking Activity of Nanomaterials

Nanozymes, a type of nanomaterials that function similarly to natural enzymes, receive extensive attention in biomedical fields. However, the widespread applications of nanozymes are greatly plagued by their unsatisfactory enzyme-mimicking activity. Localized surface plasmon resonance (LSPR), a nanoscale physical phenomenon described as the collective oscillation of surface free electrons in plasmonic nanoparticles under light irradiation, offers a robust universal paradigm to boost the catalytic performance of nanozymes. Plasmonic nanozymes (PNzymes) with elevated enzyme-mimicking activity by leveraging LSPR, emerge and provide unprecedented opportunities for biocatalysis. In this review, the physical mechanisms behind PNzymes are thoroughly revealed including near-field enhancement, hot carriers, and the photothermal effect. The rational design and applications of PNzymes in biosensing, cancer therapy, and bacterial infections elimination are systematically introduced. Current challenges and further perspectives of PNzymes are also summarized and discussed to stimulate their clinical translation. It is hoped that this review can attract more researchers to further advance the promising field of PNzymes and open up a new avenue for optimizing the enzyme-mimicking activity of nanozymes to create superior nanocatalysts for biomedical applications.

Light-Fueled Hydrogel Actuators with Controlled Deformation and Photocatalytic Activity

Hydrogel actuators have shown great promise in underwater robotic applications as they can generate controllable shape transformations upon stimulation due to their ability to absorb and release water reversibly. Herein, a photoresponsive anisotropic hydrogel actuator is developed from poly(N-isopropylacrylamide) (PNIPAM) and gold-decorated carbon nitride (Au/g-C3 N4 ) nanoparticles. Carbon nitride nanoparticles endow hydrogel actuators with photocatalytic properties, while their reorientation and mobility driven by the electrical field provide anisotropic properties to the surrounding network. A variety of light-fueled soft robotic functionalities including controllable and programmable shape-change, gripping, and locomotion is elicited. A responsive flower-like photocatalytic reactor is also fabricated, for water splitting, which maximizes its energy-harvesting efficiency, that is, hydrogen generation rate of 1061.82 µmol g-1 h-1 , and the apparent quantum yield of 8.55% at 400 nm, by facing its light-receiving area adaptively towards the light. The synergy between photoactive and photocatalytic properties of this hydrogel portrays a new perspective for the design of underwater robotic and photocatalytic devices.

Regulated synthesis of Zr-metal-organic frameworks with variable hole size and its influence on the performance of novel MOF-based heterogeneous amino acid-thiourea catalysts

We present an efficient and easy synthesis method for incorporating organocatalytic moieties into Zr-metal organic frameworks (Zr-MOFs). The catalytic activity and selectivity of the new chiral catalysts were improved by adjusting the aperture of the MOF cavities. The hole size of the Zr-MOF was modulated by adding acid and replacing bridge ligands during synthesis. The difunctional chiral units of amino acid-thiourea are anchored onto the Zr-MOF by a mild synthesis method from an isothiocyanate intermediate which could effectively avoid the racemization of chiral moieties in the synthesis process. By means of specific surface area measurement (BET), scanning electron microscopy (SEM) and powder X-ray Diffraction (PXRD), it was confirmed that Zr-MOFs with different pore sizes were synthesized without breaking the basic octahedral structure of the MOF. Finally, good yields (up to 83%) and ee values (up to 73%) were achieved with the new heterogeneous catalysts in 48 hours for the aldol reaction of 4-nitrobenzaldehyde with acetone. By contrast, using the catalyst support without modulating the synthesis, the yield (30%) and the ee-value (26%) were both low. Experiments have confirmed the important influence on the reaction selectivity of providing a suitable reaction environment by controlling the aperture of MOF cavities.

N-hexane-assisted synthesis of plasmonic Au-mediated polymeric carbon nitride photocatalyst for remarkable H2 evolution under visible-light irradiation

Plasmonic Au-mediated polymeric carbon nitride (PCN) has been recognized as one of the promising materials for photocatalytic applications due to its excellent properties in wide visible light spectrum, however it is still hindered by low catalytic efficiency. In this work, it was established that strong metal-support interactions (MSI) at the interface between plasmonic Au nanoparticles (NPs) and PCN nanosheets (PCNS) improves its photocatalytic efficiency. The resulting Au/PCNS_2.5 exhibits excellent photocatalytic activity with H₂ evolution rate up to 4.84 mmol g^-1h^-1 under visible light, 12.4 times higher than that of bulk PCN. Such strong MSI significantly strengthens the localized surface plasmon resonance (LSPR) effect of Au NPs and the charge "pump" role of Schottky junctions at Au-PCNS interface, resulting in broad light absorption range as well as effective separation and transfer of charge carrier. This work provides a new way to design the plasmonic photocatalysts for splitting water as well as other plasmon-driven chemical reactions.

Unveiling the Synthetic Potential of 1,3,5-Tri(10H-phenothiazin-10-yl)benzene-Based Optoelectronic Material: A Metal-Free and Recyclable Photocatalyst for Sequential Functionalization of C(sp2)-H Bonds

1,3,5-Tri(10H-phenothiazin-10-yl)benzene (3PTZ) is endowed with unique redox and photoresponsive characteristics and has been utilized as a p-type redox center for organic battery cathode material and a room-temperature phosphorescence (RTP) material, respectively. Conversely, its exploration in other research fields, particularly organic synthesis, remains unknown. Here, we demonstrate that 3PTZ-POP synthesized via cross-linking of 3PTZ is capable of harvesting visible-light photons and selectively converting solar energy to chemical energy. Specifically, 3PTZ-POP functions as a metal-free and recyclable photocatalyst to promote the sequential C(sp²)-H functionalizations of N-arylacrylamides with readily available trifluoromethylsulfonyl chloride as the radical precursor. An array of 3,3-disubstituted 2-oxindoles bearing a pharmaceutically important CF₃ moiety are delivered in moderate to excellent yields under mild and sustainable conditions.

The mesoscale mechanism of P-dopant defects and interface synergy for phenols degradation

The semiconductor based photocatalysis has become a hot spot of current research, and the key challenges are the construction of strong functional heterojunction photocatalysts, and insights on the working mechanism involved. In this work, we constructed a NiFe- LDHs/P-TCN heterojunction with P-dopant defects and interface synergy, and elucidated its mesoscale mechanism among different constituent interfaces. The interface photoelectron transfer was detected by PAS, EPR and other methods, and the enhancing mechanism of the defect sites for interface electron transfer and photocatalytic activity was proposed. The interfacial electrons, photoelectric properties and photocatalytic activity are found to be positively correlated. The result is conducive for a better understanding on working mechanism of heterogeneous photocatalysts, which opened up a broader research space for the rational design and construction of functional interfaces.

Nanoengineering of Catalysts for Enhanced Hydrogen Production

Hydrogen (H2) has emerged as a sustainable energy carrier capable of replacing/complementing the global carbon-based energy matrix. Although studies in this area have often focused on the fundamental understanding of catalytic processes and the demonstration of their activities towards different strategies, much effort is still needed to develop high-performance technologies and advanced materials to accomplish widespread utilization. The main goal of this review is to discuss the recent contributions in the H2 production field by employing nanomaterials with well-defined and controllable physicochemical features. Nanoengineering approaches at the sub-nano or atomic scale are especially interesting, as they allow us to unravel how activity varies as a function of these parameters (shape, size, composition, structure, electronic, and support interaction) and obtain insights into structure–performance relationships in the field of H2 production, allowing not only the optimization of performances but also enabling the rational design of nanocatalysts with desired activities and selectivity for H2 production. Herein, we start with a brief description of preparing such materials, emphasizing the importance of accomplishing the physicochemical control of nanostructures. The review finally culminates in the leading technologies for H2 production, identifying the promising applications of controlled nanomaterials.

Understanding the mechanism of interfacial interaction enhancing photodegradation rate of pollutants at molecular level: Intermolecular π-π interactions favor electrons delivery

Uncovering the interaction between photocatalyst and reaction substrate as well as subsequent electron transfer process is critical to achieve high-performance photodegradation of pollutants. Herein, based on the reduced density gradient (RDG) method, we visualize the simulation of the π-π interactions between photocatalyst (g-C₃N₄) and pollutant molecule (flumequine, FLU). Results revealed that π-π interactions between g-C₃N₄ and FLU favor electrons delivery, resulting in enhanced charge separation efficiency and direct hole oxidation of FLU. Moreover, it is found that the charge transfer rate is determined by the valence band (VB) level of g-C₃N₄ and E_HOMO of FLU, of which the deeper VB position of g-C₃N₄ favors faster charge transfer, leading to further enhancement in photocatalytic degradation rate of FLU. Additionally, the possible degradation pathways of FLU were proposed by theoretical calculation and the determined intermediates. Our work afforded a new insight into pollutants degradation and the rational design of highly efficient photocatalysts.

Thermo-photo catalysis: a whole greater than the sum of its parts

Thermo-photo catalysis, which is the catalysis with the participation of both thermal and photo energies, not only reduces the large energy consumption of thermal catalysis but also addresses the low efficiency of photocatalysis. As a whole greater than the sum of its parts, thermo-photo catalysis has been proven as an effective and promising technology to drive chemical reactions. In this review, we first clarify the definition (beyond photo-thermal catalysis and plasmonic catalysis), classification, and principles of thermo-photo catalysis and then reveal its superiority over individual thermal catalysis and photocatalysis. After elucidating the design principles and strategies toward highly efficient thermo-photo catalytic systems, an ample discussion on the synergetic effects of thermal and photo energies is provided from two perspectives, namely, the promotion of photocatalysis by thermal energy and the promotion of thermal catalysis by photo energy. Subsequently, state-of-the-art techniques applied to explore thermo-photo catalytic mechanisms are reviewed, followed by a summary on the broad applications of thermo-photo catalysis and its energy management toward industrialization. In the end, current challenges and potential research directions related to thermo-photo catalysis are outlined.

Recent Advances in g-C3 N4 -Based Photocatalysts for Pollutant Degradation and Bacterial Disinfection: Design Strategies, Mechanisms, and Applications

Emerging photocatalytic technology promises to provide an effective solution to the global energy crisis and environmental pollution. Graphite carbon nitride (g-C₃ N₄ ) has gained extensive attention in the scientific community due to its excellent physical and chemical properties, attractive electronic band structure, and low cost. In this paper, research progress in design strategies for g-C₃ N₄ -based photocatalysts in the past five years is reviewed from the perspectives of nanostructure construction, element doping, and heterostructure construction. To clarify the relationship between application requirements and structural design, variations in the morphology, electronic energy band structure, light absorption capacity, as well as interfacial charge transfer caused by various modification strategies are discussed in detail. The recent applications of g-C₃ N₄ -based photocatalysts for pollutant degradation and bacterial disinfection are reviewed, as well as the antimicrobial activity and degradation mechanisms. Finally, current challenges and future development directions for the practical application of g-C₃ N₄ -based photocatalysts are tentatively discussed.

Confinement synthesis in porous molecule-based materials: a new opportunity for ultrafine nanostructures

A balance between activity and stability is greatly challenging in designing efficient metal nanoparticles (MNPs) for heterogeneous catalysis. Generally, reducing the size of MNPs to the atomic scale can provide high atom utilization, abundant active sites, and special electronic/band structures, for vastly enhancing their catalytic activity. Nevertheless, due to the dramatically increased surface free energy, such ultrafine nanostructures often suffer from severe aggregation and/or structural degradation during synthesis and catalysis, greatly weakening their reactivities, selectivities and stabilities. Porous molecule-based materials (PMMs), mainly including metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and porous organic polymers (POPs) or cages (POCs), exhibit high specific surface areas, high porosity, and tunable molecular confined space, being promising carriers or precursors to construct ultrafine nanostructures. The confinement effects of their nano/sub-nanopores or specific binding sites can not only effectively limit the agglomeration and growth of MNPs during reduction or pyrolysis processes, but also stabilize the resultant ultrafine nanostructures and modulate their electronic structures and stereochemistry in catalysis. In this review, we highlight the latest advancements in the confinement synthesis in PMMs for constructing atomic-scale nanostructures, such as ultrafine MNPs, nanoclusters, and single atoms. Firstly, we illustrated the typical confinement methods for synthesis. Secondly, we discussed different confinement strategies, including PMM-confinement strategy and PMM-confinement pyrolysis strategy, for synthesizing ultrafine nanostructures. Finally, we put forward the challenges and new opportunities for further applications of confinement synthesis in PMMs.

Porous organic polymers for light-driven organic transformations

As a new generation of porous materials, porous organic polymers (POPs), have recently emerged as a powerful platform of heterogeneous photocatalysis. POPs are constructed using extensive organic synthesis methodologies, with various functional organic units being connected via high-energy covalent bonds. This review systematically presents the recent advances in POPs for visible-light driven organic transformations. Herein, we firstly summarize the common construction strategies for POP-based photocatalysts based on two major approaches: pre-design and post-modification; secondly, we categorize and summarize the synthesis methods and organic reaction types for constructing various types of POPs. We then classify and introduce the specific reactions of current light-driven POP-mediated organic transformations. Finally, we outline the current state of development and the problems faced in light-driven organic transformations by POPs, and we present some perspectives to motivate the reader to explore solutions to these problems and confront the present challenges in the development process.

An organometallic approach for the preparation of Au-TiO2 and Au-g-C3N4 nanohybrids: improving the depletion of paracetamol under visible light

The photocatalytic degradation of paracetamol (a common analgesic also known as acetaminophen) in ultrapure water with different photocatalytic systems was performed under ultraviolet or visible irradiation. The photocatalysts employed were: commercial Degussa-P25 TiO₂ and Au-TiO₂ under UVA irradiation (365 nm) and g-C₃N₄ and Au-g-C₃N₄ under visible light irradiation (low-power (4 × 10 W) white light LEDs), improving the effectiveness of degradation rates when the gold nanoparticles (Au NPs) were combined with the semiconductors. The nanostructured photocatalysts were synthesised and characterised by transmission electron microscope (TEM), UV-vis diffuse reflectance spectroscopy and, in the case of g-C₃N₄ photocatalysts by X-ray photoelectron spectroscopy (XPS). The influence of the pH in the depletion of paracetamol with g-C₃N₄ and visible light was evaluated. In addition, the stability and lifetime of the photocatalyst g-C₃N₄ in the degradation of paracetamol were studied.

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)-Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4-metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4-metal-oxide-based heterojunctions.

Recent progress of noble metals with tailored features in catalytic oxidation for organic pollutants degradation

With the increasing serious water pollutions, an increasing interest has given for the nanocomposites as environmental catalysts. To date, noble metals-based nanocomposites have been extensively studied by researchers in environmental catalysis. In detail, serving as key functional parts, noble metals are usually combined with other nanomaterials for rationally designing nanocomposites, which exhibit enhanced catalytic properties in pollutants removal. Noble metals in the nanocomposites possess tailored properties, thus playing different important roles in catalytic oxidation reactions for pollutants removal. To motivate the research and elaborate the progress of noble metals, this review (i) summarizes advanced characterization techniques and rising technology of theoretical calculation for evaluating noble metal, and (ii) classifies the roles according to their disparate mechanism in different catalytic oxidation reactions. Meanwhile, the enhanced mechanism and influence factors are discussed. (iii) The conclusions, facing challenges and perspectives are proposed for further development of noble metals-based nanocomposites as environmental catalysts.

Modification of graphite carbon nitride by adding an ultra-micro amount of triaminotriphenylamine for superior photocatalytic hydrogen evolution

The electron–hole pairs separated effectively by intermolecular charge transfer between triphenylamine and heptazine of doped g-C3N4 improve photocatalytic hydrogen evolution.

Facile regeneration of oxidized porous carbon nitride rods from the de-aromatization of the heptazine network in bulk g-C3N4

The production of nanostructure g-C3N4 with remarkable charge separation efficiency in a one-step, green, and economic approach is of great challenge. Herein, one-dimensional oxidized porous carbon nitride rods are successfully...

Second harmonic generation-based nonlinear plasmonic RI-sensing in solution: the pivotal role of the particle size

Here, we demonstrate the utility of the second harmonic generation (SHG) for refractometric sensing in the solution phase. We employ an aqueous colloid of gold nanorods as our sensors, and modulation in their SHG with the surrounding refractive index (RI) is mirrored using second-harmonic light scattering (SHLS). A limit of detection (LOD) as low as 9 × 10^-4 RIU is achieved. The RI sensitivity of our SHLS-based approach is two orders of magnitude higher than that obtained using linear Rayleigh scattering. Most importantly, we show that the particle size plays a crucial role in controlling the nonlinear plasmonic sensing performance of gold nanorods.

Impact of graphitic carbon nitrides synthesized from different precursors on Schottky junction characteristics

Graphitic carbon nitride (g-CN) has gained wide interest in many areas, such as energy and the environmental remediation as a layered polymeric semiconductor that allows the formation of catalytically active Schottky junctions due to its proper electronic band structure. Interestingly, although it is known that the precursors used in the synthesis, can influence the properties of the g-CN, no detailed study on these effects on Schottky junctions could be found in the literature. In this research, the effects of g-CNs synthesized by thermal polycondensation of different precursors on the photocatalytic efficiency of Schottky junctions were investigated. For this purpose, urea, thiourea, melamine, and guanidine hydrochloride were used as different precursors, while the photocatalytic dehydrogenation of formic acid was used as a test reaction. The Schottky junctions were formed by decorating the as-prepared g-CNs with AgPd alloy nanoparticles (NP), which were synthesized by reduction of Ag and Pd salts with NaBH₄. The structural, electronic and charge carrier dynamics of all prepared structures have been fully characterized by TEM, XRD, BET, XPS, UV-Vis DRS, PL, and PL life measurements. The results showed that the charge transfer dynamics of g-CNs surface defects are more effective in the photocatalytic performance of Schottky junctions than in structural features such as the size of the metal NPs or the surface area of the catalysts.

Supramolecular Self-Assembly of Nitrogen-Deficient Ag/g-C3N4 Nanofiber Films with Enhanced Charge Transfer Dynamics for Efficient Visible-Light Photocatalytic Activity

Molecular self-assembly of organic molecules through noncovalent interactions is a powerful strategy for designing functional materials. Herein, we fabricated a novel free-standing Ag/g-C₃N₄ nanofiber (Ag/CNNF) film via a water-based molecular engineering approach followed by pyrolysis using a cyanuric acid-melamine complex as the precursor. Uniform dispersion of plasmonic Ag nanoparticles and incorporation of nitrogen vacancies were synchronously introduced into the 3D highly interconnected porous CNNF framework. The resulting Ag/CNNF film with multilevel interlayer spacing distributions significantly expedited more sufficient charge transfer dynamics not only at Schottky junction sites but also throughout hierarchical CN by exciton dissociation. Benefiting from the synergistic enhancement in visible light harvesting capability and steered charge carrier transfer in a longitudinal direction, the Ag/CNNF film presented remarkably boosted photocatalytic ability both for hydrogen production and tetracycline degradation. The optimal Ag/CNNF-2 film exhibited a prominent photocatalytic hydrogen evolution rate of 1240 μmol g^-1 h^-1 without the Pt co-catalyst under visible light illumination, which was 10.3 times as high as that of bulk g-C₃N₄. Significantly, 1D Ag/g-C₃N₄ nanofibers self-assembled into an ordered and macroscopic film, which was more favorable in practical applications owing to good reusability and high processability. This work paved the way for the facile preparation of supramolecular self-assembled CN-based film photocatalysts.

Defect engineering in polymeric carbon nitride photocatalyst: Synthesis, properties and characterizations

Polymer carbon nitride (CN) has unique structure and electronic properties, making it attractive in photocatalysis fields. However, the photocatalytic efficiency of the pristine CN photocatalyst is still unsatisfactory. In this regard, the introduction of vacancy defects can effectively tune photoelectric properties of CN photocatalyst through tailoring the electronic structure and bandgap engineering. In this review, the effect of vacancy defects on CN is reviewed from the aspects of light absorption, charge separation and surface photoreactivity of CN. Meanwhile, the current progress in the design of vacancy defects with the classified carbon vacancies (CVs), nitrogen vacancies (NVs), amino and cyano groups on CN to boost the photocatalytic performance is summarized. Furthermore, various characterization methods have been summarized and highlighted, including microscopic characterization (SEM, TEM, AFM, HAADF-STEM), spectroscopic characterization (XRD, FTIR, XAFS, XANES, EPR, PAS, XPS, raman spectroscopy, solid-state NMR spectroscopy), elemental analysis, and computational characterization. Finally, the future opportunities and challenges of CN photocatalysts designed with vacancies and defects are proposed to highlight the development direction of this research field.