Conversion of bio-derived crude glycerol into renewable high-octane gasoline-stock

Here, we report an efficient catalytic process that operates on a bi-metallic ZSM-5 supported catalyst (0.1Ga-1Zn/ZSM-5) for 100% carbon conversion of glycerol to produce 71.4C% liquid fuel-stock possessing a high concentration of alkyl-aromatics and octane potential (>97 RON) for fuel applications, achieved and reported for the first time to the best of our knowledge. In addition, the H₂-rich (36 mol%) gas stream produced as a byproduct is attractive for green fuel applications. The process adds up to an ∼80% increase in the value addition of bio-glycerol, which improves the overall fuel yield of the biodiesel production process towards improved atom efficiency and process economy.

Catalytic conversion of glycerol and co-feeds (fatty acids, alcohols, and alkanes) to bio-based aromatics: remarkable and unprecedented synergetic effects on catalyst performance

Glycerol is an attractive bio-based platform chemical that can be converted to a variety of bio-based chemicals. We here report a catalytic co-conversion strategy where glycerol in combination with a second (bio-)feed (fatty acids, alcohols, alkanes) is used for the production of bio-based aromatics (BTX). Experiments were performed in a fixed bed reactor (10 g catalyst loading and WHSV of (co-)feed of 1 h-1) at 550 °C using a technical H-ZSM-5/Al2O3 catalyst. Synergistic effects of the co-feeding on the peak BTX carbon yield, product selectivity, total BTX productivity, catalyst life-time, and catalyst regenerability were observed and quantified. Best results were obtained for the co-conversion of glycerol and oleic acid (45/55 wt%), showing a peak BTX carbon yield of 26.7 C%. The distribution of C and H of the individual co-feeds in the BTX product was investigated using an integrated fast pyrolysis-GC-Orbitrap MS unit, showing that the aromatics are formed from both glycerol and the co-feed. The results of this study may be used to develop optimized co-feeding strategies for BTX formation.

Dye-functionalized metal-organic frameworks with the uniform dispersion of MnO2 nanosheets for visualized fluorescence detection of alanine aminotransferase

The wide applications of metal-organic framework (MOF) luminescent materials in the field of optics have attracted the general attention of researchers. Therefore, the development of simple and multifunctional MOF light-emitting platforms have become a research hotspot. The composites (MnO2@ZIF-8-luminol) were prepared by an in situ synthesis method and room-temperature covalent reaction. The composites and o-phenylenediamine (OPD) constitute a dual emission sensor for detecting alanine aminotransferase (ALT). OPD can be oxidized by MnO₂ to 2,3-diaminophenazine (DAP) with yellow fluorescence emission, which inhibits the blue emission of luminol through fluorescence resonance energy transfer (FRET). The presence of tiopronin (TP) will destroy the FRET process, extinguishing the yellow fluorescence emission and restoring the blue fluorescence emission. The special effect between ALT and TP will further reverse the changes in the two fluorescent signals. Moreover, in the detection process, when the blue and yellow fluorescence energies in the system are within a certain range, a new white light emission will be generated, which causes the sensing of ALT to present ternary visualization. In addition, a high-security anti-counterfeiting platform is constructed by using the prepared materials and agarose hydrogels. The anti-counterfeiting platform can encrypt information on demand according to the luminous characteristics of different materials. This study not only provides a typical case of ternary visualization sensing by MOF-based materials but also develops a possible method for the construction of a MOF-based hydrogel anti-counterfeiting platform.

Catalytic upgrading of penicillin fermentation residue bio-oil by metal-supported HZSM-5

Antibiotic fermentation residue (AR) is composed of hazardous organic waste produced by the pharmaceutical industry. AR can be effectively converted into bio-oil by fast pyrolysis, but its high nitrogen content limits the prospect of bio-oil as a fuel resource. In order to further reduce the nitrogen content of AR bio-oil, we have examined the catalytic removal of N and O from penicillin fermentation residue (PR) bio-oil under fast pyrolysis conditions. We have used M/HZSM-5 (M = Fe, Co, Ni, Cu, Zn, Zr, Mo, Ag and Ce) metal catalysts, with a metal oxide content of 10%. Additionally, the effect of mixed and separated catalytic forms on catalytic upgrading were analyzed, and changes in the catalyst itself before and after pyrolysis under separated catalytic conditions were specifically investigated. Our results show that the metal elements in the fresh catalyst will exist in the form of oxides, ions and simple metals. In-situ reduction caused by pyrolysis gas in the catalytic pyrolysis process makes some ionic metals (e.g., Co²⁺, Cu²⁺ and Ag⁺) in the catalyst transform into oxides, and some metal oxides are reduced to simple metals or suboxides (including Fe, Ni, Cu and Mo). The N content in the mixed catalytic bio-oil decreased from 10.09 wt% to Zn/HZSM-5 (6.98 wt%), Co/HZSM-5 (7.1 wt%), Cu/HZSM-5 (7.18 wt%) and Ce/HZSM-5 (7.18 wt%). We also observed significant reduction in the O content (9.77 wt%) with Ag/HZSM-5 (3.75 wt%), Mo/HZSM-5 (6.86 wt%), Ce/HZSM-5 (8.39 wt%) and Fe/HZSM-5 (8.54 wt%) in the separated catalytic bio-oil. The Ni/HZSM-5 catalystcan reduce the organic acid content in bio-oil from 22.9% to 10.8%. The separated catalysis methodology also promoted an increase of hydrocarbons in the bio-oil: Zn/HZSM-5, Ag/HZSM-5, Mo/HZSM-5, Zr/HZSM-5 and Ce/HZSM-5 reached 11.6%, 11.5%, 11.1%, 10.1%, and 8.8%, respectively. Carbon deposition formed by aromatic carbon/graphite carbon, pyrrole and pyridine compounds leads to deactivation of the catalyst.

Effects of Additives and Metals on Crystallization of Nano-Sized HZSM-5 Zeolite for Glycerol Aromatization

Nano-sized HZSM-5 (n-HZSM-5) was synthesized and applied in the aromatization of glycerol. The effects of additives (carboxymethylcellulose sodium, NaCl, sodium alginate, etc.) on the chemical and physic properties of n-HZSM-5 during preparation were investigated. Metal modification was also investigated based on the synthesized n-HZSM-5. The results showed that the addition of carboxymethylcellulose sodium (CMC-Na), NaCl and sodium alginate (SA) led to forming smaller sizes of HZSM-5 and promoted the acid amounts of the catalysts, which increased its catalytic activities for obtaining BTX. The highest BTX yield of ~35% was obtained by SA derived n-HZSM-5, and the life of the catalyst were both obviously promoted by the additives with a highest of ~11 h by γ-(2,3-epoxypropoxy)propytrimethoxysilane (KH-560) derived n-HZSM-5. BTX yields could be improved by 40%by the addition of Zn and Cd in n-HZSM-5 while having little effect on the catalyst life.

Direct production of aromatics from syngas over a hybrid FeMn Fischer–Tropsch catalyst and HZSM-5 zeolite: local environment effect and mechanism-directed tuning of the aromatic selectivity

The aromatics formation mechanism and tuning of the aromatic selectivity over FeMn–HZSM-5 catalyst system are presented.