Zirconium-based metal-organic frameworks and their roles in electrocatalysis

Due to their exceptional chemical stability in water and high structural tunability, zirconium(IV)-based MOFs (Zr-MOFs) have been considered attractive materials in the broad fields of electrocatalysis. Numerous studies published since 2015 have attempted to utilise Zr-MOFs in electrocatalysis, with the porous framework serving as either the active electrocatalyst or the scaffold or surface coating to further enhance the performance of the actual electrocatalyst. Herein, the roles of Zr-MOFs in electrocatalytic processes are discussed, and some selected examples reporting the applications of Zr-MOFs in various electrocatalytic reactions, including several studies from our group, are overviewed. Challenges, limitations and opportunities in using Zr-MOFs in electrocatalysis in future studies are discussed.

Metal-Organic Framework-Supported Mono Bipyridyl-Iron Hydroxyl Catalyst for Selective Benzene Hydroxylation into Phenol

Direct hydroxylation of benzene to phenol is more appealing in the industry for the economic and environmentally friendly phenol synthesis than the conventional cumene process. We have developed a UiO-metal-organic framework (MOF)-supported mono bipyridyl-Iron(II) hydroxyl catalyst [bpy-UiO-Fe(OH)2] for the selective benzene hydroxylation into phenol using H2O2 as the oxidant. The heterogeneous bpy-UiO-Fe(OH)2 catalyst showed high activity and remarkable phenol selectivity of 99%, giving the phenol mass-specific activity up to 1261 mmolPhOHgFe-1 h-1 at 60 °C. Bpy-UiO-Fe(OH)2 is significantly more active and selective than its homogeneous counterpart, bipyridine-Fe(OH)2. This enhanced catalytic activity of bpy-UiO-Fe(OH)2 over its homogeneous control is attributed to the active site isolation of the bpy-Fe(OH)2 moiety by the solid MOF that prevents intermolecular decomposition. Moreover, the exceptional selectivity of bpy-UiO-Fe(OH)2 in benzene to phenol conversion is originated via shape-selective catalysis, where the confined reaction space within the porous UiO-MOF prevents the formation of larger overoxidized products such as hydroquinone or benzoquinone, leading to the formation of only smaller-sized phenol after monohydroxylation of benzene. Spectroscopic and controlled experiments and theoretical calculations elucidated the reaction pathway, in which the in situ generated •OH radical mediated by bpy-UiO-FeII(OH)2 is the key species for benzene hydroxylation. This work underscores the significance of MOF-supported earth-abundant metal catalysts for sustainable production of fine chemicals.

Engineering P-Fe2O3-CoP nanosheets for overall freshwater and seawater splitting

Tailoring surface composition and coordinative environment of catalysts in a nano-meter region often influence their chemical performance. It is reported that CoP exhibits a low dissociation ability of H-OH, originating from the poor desorption of intermediate species. Herein, we provide a feasible method to construct P-Fe2O3-CoP nanosheets through a gas-phase phosphorization process. P doping induces the formation of interfacial structure between Fe2O3 and CoP and the generation of defective structures. The resulting P-Fe2O3-CoP nanosheets afford high freshwater/seawater oxidation activity (250/270 mV@10 mA/cm2) in 1 mol/L (M) KOH, which is even lower than commercial RuO2. Compared with CoP||CoP, P-Fe2O3||P-Fe2O3, and Co3O4||Co3O4, the assembled P-Fe2O3-CoP||P-Fe2O3-CoP exhibits the superior water/seawater electrolysis performance with 1.61/1.65 V@10 mA/cm2. The synergistic effect of P doping, defective structure, and heterojunction leads to high water oxidation efficiency and water splitting efficiency.

Elucidating pore chemistry within metal–organic frameworks via single crystal X-ray diffraction; from fundamental understanding to application

The application of metal–organic frameworks (MOFs) to diverse chemical sectors is aided by their crystallinity, which permits the use of X-ray crystallography to characterise their pore chemistry and provides invaluable insight into their properties.

Low-iridium electrocatalysts for acidic oxygen evolution

The widespread use of proton-exchange membrane water electrolysis is limited by the dynamically sluggish oxygen evolution reaction (OER), which is mediated by noble iridium-based materials as active and stable electrocatalysts. Significant efforts have been made to decrease the amount of iridium in OER catalysts without sacrificing their catalytic performances. In this frontier paper, we present the main common issues relevant to the iridium-catalyzed OER, including catalytically active species, catalytic mechanisms and activity-stability relation. We also take iridium-based perovskites as an example, and summarize the recent theoretical and experimental advances in available strategies that can lead to highly efficient, low-iridium oxygen evolution electrocatalysts under acidic conditions. Finally, we propose the remaining challenges and future directions for exploring acidic OER catalysts.

Molecular and heterogenized dinuclear Ir-Cp* water oxidation catalysts bearing EDTA or EDTMP as bridging and anchoring ligands

The development of efficient water oxidation catalysts (WOCs) is of key importance in order to drive sustainable reductive processes aimed at producing renewable fuels. Herein, two novel dinuclear complexes, [(Cp*Ir)₂(μ-κ³-O,N,O-H₄-EDTMP)] (Ir-H₄-EDTMP, H₄-EDTMP^4- = ethylenediamine tetra(methylene phosphonate)) and [(Cp*Ir)₂(μ-κ³-O,N,O-EDTA)] (Ir-EDTA, EDTA^4- = ethylenediaminetetraacetate), were synthesized and completely characterized in solution, by multinuclear and multidimensional NMR spectroscopy, and in the solid state, by single crystal X-Ray diffraction. They were supported onto rutile TiO₂ nanocrystals obtaining Ir-H₄-EDTMP@TiO₂ and Ir-EDTA@TiO₂ hybrid materials. Both molecular complexes and hybrid materials were found to be efficient catalysts for WO driven by NaIO₄, providing almost quantitative yields, and TON values only limited by the amount of NaIO₄ used. As for the molecular catalysts, Ir-H₄-EDTMP (TOF up to 184 min^-1) exhibited much higher activity than Ir-EDTA (TOF up to 19 min^-1), likely owing to the higher propensity of the former to generate a coordination vacancy through the dissociation of a Ir-OP bond (2.123 Å, significantly longer than Ir-OC, 2.0913 Å), which is a necessary step to activate these saturated complexes. Ir-H₄-EDTMP@TiO₂ (up to 33 min^-1) and Ir-EDTA@TiO₂ (up to 41 min^-1) hybrid materials showed similar activity that was only marginally reduced in the second and third catalytic runs carried out after having separated the supernatant, which did not show any sign of activity, instead. The observed TOF values for hybrid materials are higher than those reported for analogous systems deriving from heterogenized mononuclear complexes. This suggests that supporting dinuclear molecular precursors could be a successful strategy to obtain efficient heterogenized water oxidation catalysts.

Engineering MoS2 nanostructures from various MoO3 precursors towards hydrogen evolution reaction

MoS₂, MoO₂–MoS₂-B and MoO₂–MoS₂-R nanoflowers were prepared using α-MoO₃ particles, α-MoO₃ nanobelts and h-MoO₃ microrods, respectively; larger exposure of Mo–S and lower amounts of Mo–O were responsible for the higher HER performance.

Coordination polymers as heterogeneous catalysts in hydrogen evolution and oxygen evolution reactions

This article highlights various strategies of designing coordination polymers for catalysing water splitting reactions.

Fighting Deactivation: Classical and Emerging Strategies for Efficient Stabilization of Molecular Electrocatalysts

Development of highly active molecular electrocatalysts for fuel-forming reactions has relied heavily on understanding mechanistic aspects of the electrochemical transformations. Careful fine-tuning of the ligand environment oriented mechanistic pathways towards higher activity and optimal product distribution for several catalysts. Unfortunately, many catalysts deactivate in bulk electrolysis conditions, diminishing the impact of the plethora of highly tuned molecular electrocatalytic systems. This Minireview covers classical and emerging methods developed to circumvent catalyst deactivation and degradation, with an emphasis on successes with molecular electrocatalysts.

Metal–Organic Frameworks Toward Electrocatalytic Applications

Metal–organic frameworks (MOFs) are a class of porous materials constructed from metal-rich inorganic nodes and organic linkers. Because of their regular porosity in microporous or mesoporous scale and periodic intra-framework functionality, three-dimensional array of high-density and well-separated active sites can be built in various MOFs; such characteristics render MOFs attractive porous supports for a range of catalytic applications. Furthermore, the electrochemically addressable thin films of such MOF materials are reasonably considered as attractive candidates for electrocatalysis and relevant applications. Although it still constitutes an emerging subfield, the use of MOFs and relevant materials for electrocatalytic applications has attracted much attention in recent years. In this review, we aim to focus on the limitations and commonly seen issues for utilizing MOFs in electrocatalysis and the strategies to overcome these challenges. The research efforts on utilizing MOFs in a range of electrocatalytic applications are also highlighted.

Pyrite FeS2/C nanoparticles as an efficient bi-functional catalyst for overall water splitting

Pyrite FeS₂/C nanoparticles exhibited excellent OER/HER activity and show good overall water splitting efficiency.