Constructing TiO2@MOF S-scheme heterojunctions for enhanced photocatalytic degradation of antibiotics and Cr(VI) photoreduction

The residue of antibiotics and various pollutants has led to an urgent issue in environmental pollution control. In this study, we constructed an S-scheme P-TiO2@Zn-MOF heterojunction by self-assembling phosphonate-based MOFs on mesoporous phosphate-TiO2 beads. Compared to monomers, the P-TiO2@Zn-MOF2.0 heterojunction exhibits significantly higher photocatalytic activity for the photo-oxidative degradation of ciprofloxacin (97.2% in 60 min) and tetracyclic (TC) (94.5% in 100 min) and the photo-reduction of Cr(VI) (92.7% in 60 min) under simulated sunlight. Experimental results and calculations revealed the effective separation and transfer of photogenerated carriers at the P-TiO2@Zn-MOF2.0 S-scheme heterojunction interface, enabling the formation of highly active superoxide and hydroxyl radicals. Furthermore, the hybrid maintained excellent Cr(VI) photoreduction performance after recycling tests in actual electroplating industry wastewater at a strongly acidic pH.

Bridging Homogeneous and Heterogeneous Catalysis: Phosphine-Functionalized Metal-Organic Frameworks

Phosphine-functionalized metal-organic frameworks (P-MOFs) as an emerging class of coordination polymers, have provided novel opportunities for the development of heterogeneous catalysts. Yet, compared with the ubiquitous phosphine systems in homogeneous catalysis, heterogenization of phosphines in MOFs is still at its early stage. In this Minireview, we summarize the synthetic strategies, characterization and catalytic reactions based on the P-MOFs reported in literature. In particular, various catalytic reactions are discussed in detail in terms of phosphine ligand structure-function relationship, including the potential obstacles for future development. Finally, we discuss the possible solutions, including new types of reactions and techniques as the perspectives for the development of P-MOF catalysts, highlighting the opportunities and challenges.

Graphene-based strontium niobate-zinc oxide heterojunction photocatalyst for effective reduction of hexavalent chromium

A hydrothermal technique was employed to synthesize a Sr₂Nb₂O₇-rGO-ZnO (SNRZ) ternary nanocatalyst, in which ZnO and Sr₂Nb₂O₇ were deposited on reduced graphene oxide (rGO) sheets. The surface morphologies, optical properties, and chemical states, of the photocatalysts were characterized to understand their properties. The SNRZ ternary photocatalyst was superior over the reduction of Cr (VI) to harmless Cr (III) compared to the efficiencies obtained using bare, binary, and composite catalysts. The effects of various parameters, including the solution pH and weight ratio, on the photocatalytic reduction of Cr (VI) were investigated. The highest photocatalytic reduction performance (97.6%) was achieved at pH 4 and a reaction time of 70 min. Photoluminescence emission measurements were used to confirm efficient charge migration and separation across the SNRZ, which improved the reduction of Cr (VI). A feasible reduction mechanism for the SNRZ photocatalyst is proposed. This study presents an effective, inexpensive, non-toxic, and stable catalyst, for the reduction of Cr (VI) to Cr (III) using SNRZ ternary nanocatalysts.

Hourglass shaped polyoxometalate-based materials as electrochemical sensors for the detection of trace Cr(VI) in a wide pH range

Due to Chromium hexavalent Cr(VI) is one of the most carcinogenic toxic ions, it is essential for finding a low-cost, efficient and highly selective detection method. Considering the wide range of pH detection in water, a major issue is exploring high sensitive electrocatalyst. Thus, two crystalline materials with hourglass {P₄Mo₆} clusters in different metal centers were synthesized and had fabulous Cr(VI) detection performance in a wide pH range. At pH = 0, the sensitivities of CUST-572 and CUST-573 were 133.89 μA μM^-1 and 30.05 μA μM^-1, and the detection limits (LODs) of Cr(VI) were 26.81 nM and 50.63 nM which met World Health Organization (WHO) standard for drinking water. CUST-572 and CUST-573 also had good detection performance at pH = 1-4. In actual water samples, CUST-572 and CUST-573 also possessed sensitivities of 94.79 μA μM^-1 and 20.09 μA μM^-1 and LODs were 28.25 nM and 52.24 nM, showing high selectivity and chemical stability. The difference of the detection performance of CUST-572 and CUST-573 were mainly attributed to the interaction between {P₄Mo₆} and different metal centers of crystalline materials. In this work, electrochemical sensors for Cr(VI) detection in a wide pH range were explored, providing important guidance for the design of efficient electrochemical sensors for ultra-trace detection of heavy metal ions in practical environments.

Visible-light-driven sonophotocatalysis for enhanced Cr(VI) reduction based on mixed-linker zirconium-porphyrin MOFs

In this study, we synthesized and characterized two mixed-linker zirconium-porphyrin metal-organic frameworks, PCN-134 and PCN-138 which constructed from tetratopic light harvesting TCPP ligand and tritopic BTB/TBTB ligand (TCPP = trakis(4-carboxyphenyl)porphyrin),...

Visible-Light-Driven Sonophotocatalysis for the Rapid Reduction of Aqueous Cr(VI) Based on Zirconium-Porphyrin Metal-Organic Frameworks with csq Topology

Photochemical treatment of highly toxic Cr(VI) is a desirable and ecofriendly method to protect the environment and human beings. In this study, a MOF-based sonophotocatalytic system is established, in which visible-light-driven sonophotocatalytic reduction of toxic Cr(VI) to Cr(III) in water is investigated using zirconium-porphyrin metal-organic frameworks (MOFs) structured as PCN-222(M) [M = H₂, Zn(II), Fe(III), Co(II)]. In the view of the synergistic effect of sonochemistry and photocatalysis, PCN-222(M) exhibited enhanced activities for Cr(VI) reduction compared with the photocatalytic process. Kinetic studies showed that apparent reaction rate constants in the sonophotocatalytic system of PCN-222(M) are 1.5-3.3 times higher than those in photocatalysis. Fluorescence and UV-vis absorption spectra measurements demonstrate that the sonophotocatalytic process promotes the transfer of photoinduced electrons from PCN-222(M) to Cr(VI), thus enhancing the catalytic performance. The innovative combination of porous MOFs and sonophotocatalytic technology might become a feasible strategy to improve the existing MOF-based photocatalytic systems.

A cadmium(II) coordination polymer with a fivefold interpenetrating diamondoid three-dimensional framework: synthesis, crystal structure, luminescence and photocatalytic properties

A novel three-dimensional (3D) Cd^II coordination polymer, namely, poly[[μ₂-4,4'-bis(2-methylimidazol-1-yl)-[1,1'-biphenyl]](μ₂-5-methylisophthalato)cadmium(II)], [Cd(C₉H₆O₄)(C₂₀H₁₈N₄)]_n or [Cd(MIP)(4,4'-BMIBP)]_n, (I), was synthesized by the hydrothermal method using 5-methylisophthalic acid (H₂MIP), 4,4'-bis(2-methylimidazol-1-yl)-[1,1'-biphenyl] (4,4'-BMIBP) and Cd(NO₃)₂·6H₂O, and characterized by single-crystal X-ray diffraction, elemental analysis, IR spectroscopy and thermogravimetric analysis. Compound (I) exhibits a novel fivefold interpenetrating 3D diamondoid framework. Additionally, it shows fluorescence emission in the solid state and promising photocatalytic activities for the degradation of methylene blue (MB) in water at room temperature.

Construction of a mixed ligand MOF as "green catalyst" for the photocatalytic degradation of organic dye in aqueous media

In the past few years, metal-organic frameworks (MOFs) have emerged as a class of fascinating materials for photocatalysis. Herein, a new MOF formulated as [Zn(bpe)(fdc)]·2DMF (BUT-206, bpe = 1,2-bis(4-pyridyl) ethylene, H₂fdc = 2,5-furan dicarboxylic acid, DMF = N,N-dimethylformamide) is reported, which was synthesized under solvothermal conditions and applied for photocatalytic degradation of dyes (crystal violet and rhodamine B). Noteworthily, BUT-206 exhibited high photocatalytic activity toward the degradation of crystal violet without using any photosensitizer or cocatalyst under UV-irradiation. The photocatalytic degradation of crystal violet by BUT-206 was effective with a degradation efficiency of 92.5% within 120 minutes. The effects of key parameters including pH, amount of photocatalyst and initial concentration of dye on the dye degradation processes were examined, and the kinetics of dye degradation was established by the pseudo-first order kinetic equation. Furthermore, BUT-206 showed good cyclic stability in photocatalytic performance for up to five regeneration cycles, making it a potential green catalyst for dye degradation.

Visible light-assisted photocatalytic degradation of methylene blue in water by highly chemically stable Cd-coordination polymers at room temperature

Mesoporous YAU-10 based on a binuclear 3D structure has been synthesized as a photocatalytic material exhibiting excellent visible light-assisted degradation of methylene blue.

Syntheses, design strategies, and photocatalytic charge dynamics of metal–organic frameworks (MOFs): a catalyzed photo-degradation approach towards organic dyes

The presented review focuses on design strategies to develop tailor-made MOFs/CPs of main group, transition and inner-transition elements and their photocatalytic properties to decompose dyes in wastewater discharge and their photocatalytic mechanism.

Asymmetric Supercapacitors Based on Hierarchically Nanoporous Carbon and ZnCo2O4 From a Single Biometallic Metal-Organic Frameworks (Zn/Co-MOF)

Metal-organic framework (MOF)-derived nanoporous carbons (NPCs) and porous metal oxide nanostructures or nanocomposites have gathered considerable interest due to their potential use in supercapacitor (SCs) applications, owing to their precise control over porous architectures, pore volumes, and surface area. Bimetallic MOFs could provide rich redox reactions deriving from improved charge transfer between different metal ions, so their supercapacitor performance could be further greatly enhanced. In this study, "One-for-All" strategy is adopted to synthesize both positive and negative electrodes for hybrid asymmetric SCs (ASCs) from a single bimetallic MOF. The bimetallic Zn/Co-MOF with cuboid-like structures were synthesized by a simple method. The MOF-derived nanoporous carbons (NPC) were then obtained by post-heat treatment of the as-synthesized Zn/Co-MOF and rinsing with HCl, and bimetallic oxides (ZnCo₂O₄) were achieved by sintering the Zn/Co-MOF in air. The as-prepared MOF-derived NPC and bimetallic oxides were utilized as negative and positive materials to assemble hybrid ASCs with 6 M KOH as an electrolyte. Owing to the matchable voltage window and specific capacitance between the negative (NPC) and positive (ZnCo₂O₄), the as-assembled ASCs delivered high specific capacitance of 94.4 F/g (cell), excellent energy density of 28.6 Wh/kg at a power density of 100 W/kg, and high cycling stability of 87.2% after 5,000 charge-discharge cycles. This strategy is promising in producing high-energy-density electrode materials in supercapacitors.

Coordination-Bond-Driven Dissolution-Recrystallization Structural Transformation with the Expansion of Cuprous Halide Aggregate

Metal-organic frameworks (MOFs) with cuprous-halide-aggregates have shown superiority as organic LED (OLED) and semiconductor materials, while engineering MOF flexibility by involving the expansion of cuprous aggregates remains a great challenge. In this particular work, a dissolution-recrystallization structural transformation (DRST) with the dramatic growth of Cu^I-I aggregates, from 2D NJNU-100 to 3D NJNU-101 has been successfully realized. The unsaturated coordination nodes (2-positional nitrogen atoms) in NJNU-100 have been demonstrated to be the driven force for DRST to NJNU-101 via the formation of coordination bonds. The structural transformation process was irreversible and observed with optical microscopy and powder XRD. The expansion of Cu^I-I aggregates was also computational simulated accompanying with the rotation of the neutral tripodal TTTMB ligand (1,3,5-tris(1,2,4-triazol-1-ylmethyl)-2,4,6-trimethylbenzene) and the reduction of Cu^II to Cu^I. Moreover, the intermediate product NJNU-102 was captured by adding the planar molecular anthrancene to shut down the reaction, where only partial 2-positional nitrogen atoms coordinated to the aggregates and the anthrancene was oxidized to anthraquinone. NJNU-102 has further confirmed that DRST involved the breakage and recombination of coordination bonds and the electron transfer. NJNU-100 and NJNU-101 could be applied as semiconductor and OLED materials. This work has provided insights for crystal engineering, especially for the construction of the Cu^I_xX_y aggregates, and illustrated that DRST could be controlled with a rational design (as the unsaturated coordination modes).

Highly Stable Phosphonate-Based MOFs with Engineered Bandgaps for Efficient Photocatalytic Hydrogen Production

Photoactive metal-organic frameworks (MOFs) represent one of the most promising materials for photocatalytic hydrogen production, but phosphonate-based MOFs have remained largely underdeveloped compared to other conventional MOFs. Herein, a photocatalyst of 1D titanium phosphonate MOF is designed through an easy and scalable stirring hydrothermal method. Homogeneous incorporation of organophosphonic linkers can narrow the bandgap, which is due to the strong electron-donating ability of the OH functional group that can efficiently shift the top of the valence band, moving the light absorption to the visible portion of the spectrum. In addition, the unique 1D nanowire topology enhances the photoinduced charge carrier transport and separation. Accordingly, the titanium phosphonate nanowires deliver remarkably enhanced photocatalytic hydrogen evolution activity under irradiation of both visible light and a full-spectrum simulator. Such concepts of engineering both nanostructures and electronic states herald a new paradigm for designing MOF-based photocatalysts.

A new two-fold interpenetrating two-dimensional copper(II) coordination polymer constructed from 4,4′-bis(2-methylimidazol-1-yl)diphenyl ether

A new Cu(II) metal-organic framework, [Cu(BMIOPE)(Br-BDC)] n (1) [Br-H2BDC = 5-bromo-isophthalic acid, BMIOPE = 4,4′-bis(2-methylimidazol-1-yl)diphenyl ether], has been hydrothermally synthesized and characterized through IR spectroscopy, elemental and thermal analysis, and single-crystal X-ray diffraction. Complex 1 possesses a unique two-fold interpenetrating two-dimensional framework with sql topology. The photocatalytic property of complex 1 for oxidative degradation of methyl orange and methylene blue with hydrogen peroxide was examined under UV irradiation.

Photochemical reduction of Cr(vi) compounds by amino acid Schiff base copper complexes with a hydroxyl group and titanium oxide composites in aqueous solutions

The photo-driven reduction reaction of Cr(vi) to Cr(iii) by Schiff base Cu(ii) complexes was studied in aqueous and methanol solutions. The Cr(vi) reduction ratio with the CuVDB–TiO₂ system reached 91%.

Flexible bifunctional monoethylphosphonate/carboxylates of Zn(ii) and Co(ii) reinforced with DABCO co-ligand: paradigmatic structural organization with topology

The prototypal [M₂(EtBCP)₂(DABCO)_0.5] MOFs, compliant with isoreticular expansion in two-dimensions, show flexibility manifested by a two-step CO₂ adsorption isotherm, which might be associated to the “lever-action” of the metal-phosphonate moieties.

Changes in magnetic order through two consecutive dehydration steps of metal-phosphonate diamond chains

Hydrothermal reactions of the multitopic ligand 1-hydroxy-1-(piperidin-4-yl)methylidenebisphosphonic acid (hpdpH₄) with cobalt or nickel sulfates afforded two new isostructural metal phosphonates, M₃^II(hpdpH)₂(H₂O)₆·4H₂O [M = Co (Co-10H₂O), Ni (Ni-10H₂O)]. Their structures consist of parallel diamond chains of three MO₆ octahedra bridged by the PO₃C tetrahedra. Six of the seven oxygen atoms of the ligand are involved in coordination; for two ligands that amounts to 12 bonds for 3 MO₆ and the remaining six are occupied by terminal water molecules. In addition, four water molecules sit in between the chains providing H-bonds to the formation of a 3D-net. Thermal analyses show identical two-step dehydration processes involving first the departure of six water molecules followed by the remaining four. A detailed study of the ac- and dc-magnetization as a function of temperature, field and frequency reveals associated drastic changes. The virgin form Co-10H₂O is a paramagnet while its partial dehydrated form Co-4H₂O is an antiferromagnet displaying canting below T_N = 4.7 K and the fully dehydrated form Co is a ferrimagnet (T_C = 12 K). Ni-10H₂O and Ni-4H₂O exhibit long-range ordered antiferromagnetism (T_N = 2.7 and 4.0 K, respectively) and also become ferrimagnets (T_C = 9.4 K) when fully dehydrated to Ni. The dehydrated samples can be fully rehydrated with the complete recovery of both the structures and magnetic properties.

M₃^II(hpdpH)₂(H₂O)₆·4H₂O (M = Co, Ni) experience identical two-step dehydration processes associated with drastic magnetic changes from paramagnet to antiferromagnet/metamagnetic to ferrimagnet for M = Co, and from antiferromagnet to antiferromagnet to ferrimagnet for M = Ni.

A novel nitrogen heterocyclic ligand-based MOF: synthesis, characterization and photocatalytic properties

The synthesis of novel coordination polymers that are highly efficient, stable and reusable photocatalysts for the degradation of MB dye.

6,6′-(Perfluoropropane-2,2-diyl)bis(2,3-dihydrophthalazine-1,4-dione)-based coordination polymers and their sensing properties towards Cr2O72−

The structures of six new diacylhydrazidate-based coordination polymers were reported. Based on their better photoluminescence properties, their sensing abilities towards Cr2O₇²⁻ were investigated.

Effect of Fe/Sn doping on the photocatalytic performance of multi-shelled ZnO microspheres: experimental and theoretical investigations

A series of multi-shelled Fe³⁺/Sn⁴⁺-doped ZnO microspheres were synthesized by calcining carbon microspheres as sacrificial templates.