Nickel-Catalyzed Double Deoxygenative C-N Coupling of Acyloxyamines

A double deoxygenative C-N coupling protocol has been developed by employing acyloxyamines through N-O bond activation. The C-N bond formation under mild reaction conditions, employing NiCl2 as the catalyst and cataCXiumA as a ligand, results in the production of a diverse array of alkylated secondary or tertiary amines, including heterocyclic amines. This method introduces a novel catalytic strategy that emphasizes the versatility of nickel-catalyzed reactions, extending beyond traditional synthetic boundaries.

Hydrosilylative reduction of primary amides to primary amines catalyzed by a terminal [Ni-OH] complex

A terminal [Ni-OH] complex 1, supported by triflamide-functionalized NHC ligands, catalyzes the hydrosilylative reduction of a range of primary amides into primary amines in good to excellent yields under base-free conditions with key functional group tolerance. Catalyst 1 is also effective for the reduction of a variety of tertiary and secondary amides. In contrast to literature reports, the reactivity of 1 towards amide reduction follows an inverse trend, i.e., 1° amide > 3° amide > 2° amide. The reaction does not follow a usual dehydration pathway.

Organic synthesis with the most abundant transition metal–iron: from rust to multitasking catalysts

The promising aspects of iron in synthetic chemistry are being explored for three-four decades as a green and eco-friendly alternative to late transition metals. This present review unveils these rich iron-chemistry towards different transformations.

Reactivity of N-Phosphinoguanidines of the Formula (HNR)(Ph2PNR)C(NAr) toward Main Group Metal Alkyls: Facile Ligand Rearrangement from N-Phosphinoguanidinates to Phosphinimine-Amidinates

We report the reactivity of N-phosphinoguanidines of the formula (HNR)(Ph₂PNR)C(NAr) (R = ⁱPr and Ar = 2,6-ⁱPr₂C₆H₃ [Dipp] for 1a, R = ⁱPr and Ar = 2,4,6-Me₃C₆H₂ [Mes] for 1b, and R = Cy and Ar = Dipp for 1c), prepared in high yields from the corresponding trisubstituted guanidines, toward main group metal alkyls AlMe₃, ZnEt₂, MgⁿBu₂, and ⁿBuLi to obtain novel phosphinoguanidinato and phosphinimine-amidinato compounds. Reactions of 1a-c with AlMe₃ at room temperature led to the kinetic phosphinoguanidinato products [Al{κ²-N,N'-(NR)C(NAr)(NRPPh₂)}Me₂] (2a-c), whereas the mild heating (60-80 °C) of solutions of 2a-c give the thermodynamic phosphinimine-amidinato products [Al{κ²-N,N'-(NR)C(NAr)(PPh₂NR)}Me₂] (3a-c) after ligand rearrangement. The reactions of equimolar amounts of 1a-c and ZnEt₂ initially give solutions containing unstable phosphinoguanidinato compounds [Zn{κ²-N,P-(NR)C(NAr)(NRPPh₂)}Et] (4a-c), which rearrange upon mild heating to the phosphinimine-amidinato derivatives [Zn{κ²-N,N'-(NR)C(NAr)(PPh₂NR)}Et] (6a-c). Bis(phosphinoguanidinato) compounds [Zn{κ²-N,P-(NR)C(NAr)(NRPPh₂)}₂] (5a-c) can be obtained under mild conditions (<45 °C) in THF, whereas bis(phosphinimine-amidinato) compounds [Zn{κ²-N,N'-(NR)C(NAr)(PPh₂NR)}₂] (7a-c) are also accessible under more forcing conditions (55-100 °C) from (i) ZnEt₂ and 1b,c (2 equiv), (ii) 6a and 1a, or (iii) 5b,c. Equimolar mixtures of MgⁿBu₂ and 1a-c in THF at room temperature give unstable phosphinimine-amidinato monoalkyl products [Mg{κ²-N,N'-(NR)C(NAr)(PPh₂NR)}ⁿBu(THF)₂] (8a-c), whereas 2 equiv of 1a,b are required to reach the bischelate compounds [Mg{κ²-N,N'-(NⁱPr)C(NAr)(PPh₂NⁱPr)}₂] (9a,b). Finally, phosphinoguanidinato compounds [Li{κ²-N,P-(NR)C(NDipp)(NRPPh₂)}(THF)₂] (10a,c) were obtained in the reactions of 1a,c with ⁿBuLi in THF under ambient conditions. The removal of the solvent from solutions of 10a,c under partial vacuum leads to the dinuclear compounds [Li₂{μ-κ²-N,N':κ¹-N-(NR)C(NDipp)(NRPPh₂)}₂(THF)₂] (11a,c) after the decoordination of one of the THF molecules in 10a,c and dimerization. Heating solutions of 10a,c at 60 °C triggers ligand rearrangement to give phosphinimine-amidinato compounds [Li{κ²-N,N'-(NR)C(NDipp)(PPh₂NR)}(THF)₂] (12a,c). We also propose a mechanism for the ligand rearrangement reaction from 10a to give 12a, supported by DFT calculations, which fits nicely with our experimental results. It essentially involves a carbodiimide deinsertion reaction followed by a [3 + 2] cycloaddition between the resulting lithium phosphino-amide and the carbodiimide.

Synthetic investigations of low-coordinate (N-phosphino-amidinate) nickel chemistry: agostic alkyl complexes and benzene insertion into Ni-H

Treatment of (PN)NiX (X = NHdipp or OtBu; PN = N-phosphinoamidinate ligand) with Me2PhSiH in benzene solvent afforded the crystallographically characterized, antifacial-coordinated, dinuclear species 1, the formation of which corresponds to the hitherto unknown net Ni-H addition of two equivalents of the putative (PN)NiH intermediate across C[double bond, length as m-dash]C units within a single benzene molecule. Computational analysis supports the view of 1 as being comprised of two cationic (PN)NiII fragments ligated by a substituted butadiene dianion μ2-η3:η3-C6H82- bridging group. Also described is the formation and characterization of three-coordinate (PN)Ni(alkyl) complexes stabilized by β-agostic (alkyl = Et, 2; n-Bu, 3; n-hexyl, 4) or γ-agostic (alkyl = neopentyl, 5) interactions, and our efforts to employ 2 and 3 as synthons for the generation of (PN)NiHvia β-hydride elimination. Notably, compound 5 represents both the first crystallographically characterized three-coordinate Ni-alkyl complex featuring a heterobidentate ligation, and the first neutral γ-agostic NiII-alkyl complex.

Base Metal Catalysts for Deoxygenative Reduction of Amides to Amines

The development of efficient methodologies for production of amines attracts significant attention from synthetic chemists, because amines serve as essential building blocks in the synthesis of many pharmaceuticals, natural products, and agrochemicals. In this regard, deoxygenative reduction of amides to amines by means of transition-metal-catalyzed hydrogenation, hydrosilylation, and hydroboration reactions represents an attractive alternative to conventional wasteful techniques based on stoichiometric reductions of the corresponding amides and imines, and reductive amination of aldehydes with metal hydride reagents. The relatively low electrophilicity of the amide carbonyl group makes this transformation more challenging compared to reduction of other carbonyl compounds, and the majority of the reported catalytic systems employ precious metals such as platinum, rhodium, iridium, and ruthenium. Despite the application of more abundant and environmentally benign base metal (Mn, Fe, Co, and Ni) complexes for deoxygenative reduction of amides have been developed to a lesser extent, such catalytic systems are of great importance. This review is focused on the current achievements in the base-metal-catalyzed deoxygenative hydrogenation, hydrosilylation, and hydroboration of amides to amines. Special attention is paid to the design of base metal catalysts and the mechanisms of such catalytic transformations.

Unusual ligand rearrangement: from N-phosphinoguanidinato to phosphinimine-amidinato compounds

Novel N-phosphinoguanidines (HNiPr)(Ph2PNiPr)C(NAr) (Ar = 2,6-iPr2C6H3, 2,4,6-Me3C6H2) react with AlMe3 to afford phosphinimine-amidinato derivatives, via an unprecedented rearrangement of an initial N-phosphinoguanidinato intermediate. A reasonable mechanism has been proposed for this transformation, supported by DFT calculations, involving carbodiimide de-insertion followed by a [3+2] cycloaddition.

POCN Ni(ii) pincer complexes: synthesis, characterization and evaluation of catalytic hydrosilylation and hydroboration activities

(POCN)Ni(ii) complexes were found to mediate a variety of carbonyl hydroboration reactions, including chemoselective hydroboration of benzaldehyde and hydroborative reduction of amides.