Alkyl-dependent self-assembly of the first red-emitting zwitterionic {Cu4I6} clusters from [alkyl-P(2-Py)3]+ salts and CuI: when size matters

Realizing Color Transitions for Three Copper (I) Cluster Organic-Inorganic Hybrid Materials by Adjusting Reaction Conditions

Copper iodide organic-inorganic hybrid materials have been favored by many researchers in the field of solid-state lighting (SSL) due to their structural diversity and optical adjustability. In this paper, three isomeric copper iodide cluster hybrid materials, Cu4I6(L)2(1), Cu5I4.5Cl2.5(L)2(2) and Cu5I7(L)2) (3) (L=1-(4-methylpyrimidin-2-yl)-1,4-diazabicyclo[2.2.2]octan-1-ium), were achieved by adjusting the reaction conditions. The crystal color transit from green, yellow to orange and the internal quantum yield (IQY) increase from 57 %-88 %. All three complexes have good thermal stability, good solution processability, and high quantum yield. And origin and mechanism of luminescence of complexes were further studied. This study can provide ideas and theoretical basis for the regulation of cuprous iodide cluster luminescent materials.

Structural Diversity and Rare η1 Cu-C Interactions in CuI Complexes of 1,2,3-Triazole-Functionalized Bisphosphines

This manuscript describes the synthesis of copper complexes of 1,2,3-triazolyl-phosphines: o-Ph2P(C6H4){1,2,3-N3CC6H5)C(PPh2)} (L1), (C6H5){1,2,3-N3C(C6H4(o-PPh2))-C(PPh2)} (L2), 3-Ph2P(C5H3N){1,2,3-N3C(C6H5)C(PPh2)} (L3), o-Ph2P(C6H4){1,2,3-N3C(C5H5N)C(PPh2)} (L4), and {(3,5-Ph2PC6H4-o)21,2,3-N3CCH} (L5). The reactions of L1-L3 with CuI salts afforded dimeric complexes having the general formula [Cu2(μ -X)2L2] (L = L1, X = Cl, Br and I: 1 - 3; L= L2, X = Cl, Br and I: 4- 6; L = L3; X = Cl, Br, and I: 7-9). The reaction of L4 with CuI in a 1:2 molar ratio afforded 1D-coordination polymer [{(CuI)2{o-Ph2P(C6H4){1,2,3-N3C(C5H5N)C(PPh2)}-μ-((k1-N)(k2-P,P))}}]n (10). The reaction of L5 with cuprous halides (CuX) (X = Br, I) yielded mononuclear complexes [CuX{(3,5-Ph2PC6H4-o)21,2,3-N3CCH}-κ2P,P] (X = Br, 12; I, 13). Crystal structures of complexes 12 and 13 showed close interactions between CuI and the triazole C7 carbon. These relatively short Cu···C7 separations may be due to the η1-C interaction (dπ-pπ bond) between the triazolic carbon atom (via pz orbital) and CuI or three-centered two-electron interaction between CuI and the triazolic C-H bond. The existence of the Cu···C interaction was further evinced by the QTAIM analysis in compounds 12 and 13.

Pseudohalide Ions as Ligands to Tune Architecture and Luminescence of Polymetallic CU(I) Assemblies

The reaction of preassembled Cu(I) bimetallic units {Cu2(dppm)2} and {Cu2(dppa)2} (dppm: bis(diphenylphosphino)methane and dppa: bis(diphenylphosphino)amine) with pseudohalide linkers (azido, dicyanamide, and tricyanomethanide) allows for the quantitative and selective preparation of three discrete tetrametallic metallacycles of formula [Cu4(μ2-dppm)4(N3)2](PF6)2, [Cu4(μ2-dppm)4(N(CN)2)2](PF6)2, and [Cu4(μ2-dppm)4(C(CN)3)4]. To explore further the impact of the linker on the architecture and dimensionality of the molecular edifice, the study was extended to more sophisticated tetradentate cyanocarbanion ligands (tcnsMe-: 2-(methylthio)-1,1,3,3-propanetetracarbonitrile and tcnsEt-: 2-(ethylthio)-1,1,3,3-propanetetracarbonitrile). Three ladder-like one-dimensional coordination polymers and an octametallic metallacycle have been obtained. The careful comparison of the metric and geometrical intramolecular and intermolecular parameters observed in this series of seven derivatives allows for rationalization of their molecular architectures. The subtle balance between the length and steric hindrance of the ligand and the formation of noncovalent interaction networks greatly influences the topology and dimensionality of the resulting assemblies and will be discussed hereafter. The photophysical properties of these seven polymetallic Cu(I) compounds have also been also studied.

Self-Assembly of an Anionic [Cu5I8]3- Supramolecular Cluster Driven by Ion-Pair Interaction and Catalytic Properties

The rational design and controlling synthesis of an anionic cuprous iodide supramolecular cluster with high nuclearity through noncovalent interactions remains a significant challenge. Herein, a cationic organic ligand (L1)3+ was driven by anion-cation ion-pair electrostatic interaction to induce free cuprous iodide to aggregate into an anionic supramolecular cluster, [(Cu5I8)3-(L1)3+] (C1). Moreover, five copper(I) atoms bind with eight iodides through multiply bridged Cu-I bonds associated with intramolecular cuprophilic interactions in this butterfly-shaped cluster core. Supramolecular cluster C1 exhibited a solid-state emission at 380 nm and an emission at 405 nm in acetonitrile at room temperature, respectively. Interestingly, this unprecedented cuprous iodide cluster demonstrated a good catalytic performance for azide-alkyne cycloaddition reaction (CuAAC) and the catalytic yield can be up to 80% for eight different substrates at 80 °C. Furthermore, the density functional theory (DFT) calculation revealed that the thermodynamic-dependent cycloaddition reaction underwent a four-step pathway with an overall energy barrier of -43.6 kcal mol-1 on the basis of intermediates monitored by mass spectrum.

Realizing near white and warm light emission of cuprous iodide complexes by alkyl-isomerization of ligands

Four novel all-in-one structured cuprous iodide hybrid materials are presented. Isomerization of the alkyl chain on the ligand improved material thermal stability and regulated their luminescence to warm and near-white light emission, with the internal quantum yield increasing from 5% to 83%. This provides a reasonable route for designing white light emitting cuprous iodide materials for solid-state lighting in future.

Solution-Processable Copper Halide Based Hybrid Materials Consisting of Cationic Ligands with Different Coordination Modes

Using cationic ligands containing both aromatic and aliphatic coordination sites, we have synthesized and structurally characterized five new CuX-based hybrid materials consisting of anionic inorganic motifs that also form coordinate bonds with the cationic organic ligands. As a result of the unique bonding nature at the inorganic/organic interfaces, these compounds demonstrate strong resistance toward heat and can be readily processed in solution. They emit light in the visible region ranging from cyan to yellow color, with the highest photoluminescence quantum yield (PLQY) reaching 71%. The influence of the different coordination modes of the ligands on their emission behavior was investigated employing both experimental and theoretical methods, which have provided insight in understanding structure-property relationships in these materials and guidelines for tuning and enhancing their chemical and physical properties.

Luminescence thermochromism in novel mixed Eu(II)-Cu(I) iodide

A new mixed Eu(II)-Cu(I) iodide [Eu(DME)₄][Cu₂I₄] (1) was synthesized by the reaction of an organosulphide salt of Eu(II) and CuI in DME media. X-ray analysis revealed that 1 is an ate-complex consisting of Eu(DME)₄ dications and tetraiododicuprate dianions. Upon UV light excitation (λ = 365 nm), the compound exhibits intense double-peaked photoluminescence (PL) at 445 and 500 nm. The relative intensity of these peaks changes dramatically when the temperature changes in the range of 180-250 K. To understand the nature of the found PL thermochromism, the structure and time-resolved PL of 1 were studied at various temperatures. The time-resolved PL studies of 1 at various temperatures revealed the presence of two luminescent centers which are excited by the capture of an electron from the conduction band. The ratio of intensities at 445 and 500 nm (R = I₄₄₅/I₅₀₀) in the PL spectra of 1 changes by almost two orders of magnitude and the relative sensitivity S (S = (∂R/∂T)/R) exceeds 5% per K in the range of 190-245 K that makes this compound a promising luminescent thermometer for the range where ammonia exists in a liquid state.

Luminescent Cu4I4-cubane clusters based on N-methyl-5,10-dihydrophenarsazines

Two luminescent Cu₄I₄-cubane tetramers with N-methyl-10-(p-halogenophenyl)-5,10-dihydrophenarsazine ligands were synthesized and characterized by NMR spectroscopy, mass spectrometry, elemental analysis, and single-crystal X-ray diffraction analysis. The UV-Vis absorption and emission properties were studied and rationalized by DFT and time-dependent DFT calculations. The luminescence behavior was found to be rather different from that of recently reported tetranuclear copper iodide cubane clusters based on As,O-analogues - 10-(aryl)phenoxarsines. The crystalline powders of both complexes exhibit the temperature-dependent dual-band emission: the low-energy emission originates from the cluster-centered (³CC) triplet state, whereas the high-energy emission was attributed to the intraligand (³IL) triplet state.

Copper(I) iodide-based organic–inorganic hybrid compounds as phosphor materials

Two photoluminescent copper(I) iodide inorganic-organic hybrid materials have been synthesized and structurally characterized as 1D-Cu2I2(bpoe)2 (1) and 1D-Cu2I2(bbtpe-m)2 (2) (bpoe = 1,2-bis(pyridin-3-yloxy)ethane, bbtpe-m = 1,1′-(3-methylpentane-1,5-diyl)bis(1H-benzo[1,2,3]triazole). Both are chain-like structures composed of Cu2I2 rhomboid dimers connected by bidentate ligands. Their emission colors range from cyan to yellow with relatively high internal quantum yields in the solid state. The tunable band gap and emission color is achieved by varying the LUMO energies of the ligands. The structures are robust and remain stable up to T = 260 °C, and coupled with their efficient and adjustable luminescence, facile synthesis, and non-toxic nature, these compounds demonstrate potential as rare earth element (REE)-free phosphors.

Photoinduced Dynamics of (CH3NH3)4Cu2Br6 Thin Films Indicating Efficient Triplet Photoluminescence

Hybrid organic-inorganic halogenidocuprates based on copper(I) represent materials with rich structural diversity and high photoluminescence (PL) quantum yield, yet the mechanism responsible for their efficient, strongly Stokes-shifted emission is still unclear. Here we report the successful preparation of (CH₃NH₃)₄Cu₂Br₆ thin films with a zero-dimensional molecular salt structure featuring "isolated" [Cu₂Br₆]^4- ions. Time-resolved broadband PL measurements provide an excited-state lifetime of 114 μs at 298 K. Results from femto- to microsecond UV-vis-NIR transient absorption experiments combined with DFT/TDDFT calculations suggest the formation of a long-lived structurally relaxed triplet species through intersystem crossing (61 ps), which almost exclusively decays by phosphorescence. In addition, time scales for structural relaxation and cooling processes are extracted from a global kinetic analysis of the transient spectra. Calculations for the isolated [Cu₂Br₆]^4- anion and the (CH₃NH₃)₄Cu₂Br₆ crystal suggest a strong impact of the crystal environment on the structure of the anion.

All-in-one: a new approach toward robust and solution-processable copper halide hybrid semiconductors by integrating covalent, coordinate and ionic bonds in their structures

Conventional inorganic semiconductors are best known for their superior physical properties and chemical robustness, and their widespread use in optoelectronic devices. However, implementation of these materials in many other applications has been hindered by their poor solubility and/or solution-processability, a longstanding drawback that is largely responsible for issues such as high cost. While recent progress on hybrid perovskites, an important class of inorganic-organic hybrid materials, has shed light on the development of high-performance solution processable semiconductors, they rely heavily on toxic metals and generally suffer from framework instability. To address these issues, a new group of hybrid semiconductors based on anionic copper(i) halide and cationic organic ligands has been developed. These compounds are noted as All-In-One (AIO) structures as they consist of covalently bonded anionic CuX inorganic modules that form both coordinate and ionic bonds with cationic organic ligands. Studies demonstrate that framework stability and solution processibility of these materials are greatly enhanced as a result of such bonds. In the perspective, we highlight the development of this newly emerged type of materials including their crystal structures, chemical and physical properties and possible applications. The untapped potential that the AIO approach can offer for other hybrid families is also discussed.

Self-assembled luminescent Cu(i) tetranuclear metallacycles based on 3,3′-bipyridine ligands

Three luminescent tetranuclear macrocycles are obtained selectively, applying coordination-driven supramolecular processes to the reaction of 3,3′-bipyridine ligand with in situ formed Cu(i) bimetallic units bearing a coordination angle of ca. 120°.

Coordination-driven supramolecular syntheses of new homo- and hetero-polymetallic Cu(i) assemblies: solid-state and solution characterization

New luminescent Cu(i) discrete assemblies D and FM and 1D coordination polymer E are reported. Deep insights of self-assembly processes based on flexible Cu(i) precursors are highlighted together with the preservation in solution of Cu(i) assemblies.

A copper(i) bromide organic–inorganic zwitterionic coordination compound with a new type of core: structure, luminescence properties, and DFT calculations

A new organic–inorganic Cu(i) bromide complex based on protonated tris(2-pyridyl)phosphine, [(HPy)₃PCu₂Br₅], has been synthesized by a straightforward reaction in solution or by modification of the [Cu₂Br₂(Py₃P)₂] complex using hydrobromic acid.

Intramolecular rearrangements guided by adaptive coordination-driven reactions toward highly luminescent polynuclear Cu(i) assemblies

Highly luminescent solid-state Cu₆, Au₂Cu₁₀ and Pt₄Cu₁₁ derivatives are obtained in one step reaction thanks to adaptive coordination-driven supramolecular chemistry using pre-assembled flexible Cu(i) precursors.

Luminescent vapochromic single crystal to single crystal transition in one-dimensional coordination polymer featuring the first Cu(i) dimer bridged by an aqua ligand

Vapochromic luminescence caused by included solvent mobility is observed in reversible single-crystal to single-crystal (SC–SC) transitions in a one-dimensional coordination polymer bearing the first reported water molecule bridging two Cu(i) ions.