Bifunctional quaternary magnetic composite as efficient heterojunctions photocatalyst for simultaneous photocatalytic visible light degradation of dye and herbicide pollutants from water and bacterial disinfection

In the present study, the magnetic Fe3O4/Ag2C2O4/Ag3PO4/Ag nanocomposite were prepared through a simple co-precipitation method by using calendula officinalis seed extract as a stabilizer. The fabricated quaternary photocatalyst was applied for to degrade food dye Brilliant Blue FCF (BB) and herbicide Paraquat (PQ) as contaminants at binary mixture in a batch and continuous flow-loop photoreactor under visible light irradiation and also the antibacterial properties was investigated. The fabricated nanocomposite was determined by XRD, FESEM, EDX, BET&BJH, UV-DRS, FT-IR and VSM methods to gain insight about structure, morphology, purity, surface area, optical, functional group and magnetic properties. The photoelectrochemical experiments, PL and DRS indicate the successful coupling of the active semiconductors. The degradation efficiency of BB and PQ was announced to be 88.9% and 92.72% under optimal conditions with a high reaction rate constant value (0.03 and 0.0326 min-1), respectively. The quaternary photocatalyst exhibited superior photocatalytic performance compared with Ag3PO4/Ag2C2O4 and Ag2C2O4. Various scavengers were used to explore the mechanism of photocatalytic performance and supports that [Formula: see text] and OH. is main active species in the degradation process of BB and PQ, respectively. Furthermore, the Fe3O4/Ag2C2O4/Ag3PO4/Ag also demonstrated bactericidal activity against Staphylococcus aureus (S. aureus) as gram-positive bacteria and Escherichia coli (E. coli) as gram-negative bacteria.

Synthesis of TiO2/Al2O3 Double-Layer Inverse Opal by Thermal and Plasma-Assisted Atomic Layer Deposition for Photocatalytic Applications

In comparison to conventional nano-infiltration approaches, the atomic layer deposition (ALD) technology exhibits greater potential in the fabrication of inverse opals (IOs) for photocatalysts. In this study, TiO₂ IO and ultra-thin films of Al₂O₃ on IO were successfully deposited using thermal or plasma-assisted ALD and vertical layer deposition from a polystyrene (PS) opal template. SEM/EDX, XRD, Raman, TG/DTG/DTA-MS, PL spectroscopy, and UV Vis spectroscopy were used for the characterization of the nanocomposites. The results showed that the highly ordered opal crystal microstructure had a face-centered cubic (FCC) orientation. The proposed annealing temperature efficiently removed the template, leaving the anatase phase IO, which provided a small contraction in the spheres. In comparison to TiO₂/Al₂O₃ plasma ALD, TiO₂/Al₂O₃ thermal ALD has a better interfacial charge interaction of photoexcited electron-hole pairs in the valence band hole to restrain recombination, resulting in a broad spectrum with a peak in the green region. This was demonstrated by PL. Strong absorption bands were also found in the UV regions, including increased absorption due to slow photons and a narrow optical band gap in the visible region. The results from the photocatalytic activity of the samples show decolorization rates of 35.4%, 24.7%, and 14.8%, for TiO₂, TiO₂/Al₂O₃ thermal, and TiO₂/Al₂O₃ plasma IO ALD samples, respectively. Our results showed that ultra-thin amorphous ALD-grown Al₂O₃ layers have considerable photocatalytic activity. The Al₂O₃ thin film grown by thermal ALD has a more ordered structure compared to the one prepared by plasma ALD, which explains its higher photocatalytic activity. The declined photocatalytic activity of the combined layers was observed due to the reduced electron tunneling effect resulting from the thinness of Al₂O₃.

Engineered inverse opal structured semiconductors for solar light-driven environmental catalysis

Inverse opal (IO) macroporous semiconductor materials with unique physicochemical advantages have been widely used in solar-related environmental areas. In this minireview, we first summarize the synthetic methods of IO materials, emphasizing the two-step and three-step approaches, with the typical physicochemical properties being compared where applicable. We subsequently discuss the application of IO semiconductors (e.g., TiO₂, ZnO, g-C₃N₄) in various photo-related environmental techniques, including photo- and photoelectro-catalytic organic pollutant degradation in water, optical sensors for environmental monitoring, and water disinfection. The engineering strategies of these hierarchical structures for optimizing the activities for different catalytic reactions are discussed, ranging from heterojunction construction, cocatalyst loading, and heteroatom doping, to surface defect construction. Structure-activity relationships are established correspondingly. With a systematic understanding of the unique properties and catalytic activities, this review is expected to orient the design and structure optimization of IO semiconductor materials for photo-related performance improvement in various environmental techniques. Finally, the challenges of emerging IO structured semiconductors and future development directions are proposed.

Facile Synthesis with TiO2 Xerogel and Urea Enhanced Aniline Aerofloat Degradation Performance of Direct Z-Scheme Heterojunction TiO2/g-C3N4 Composite

Different TiO₂/g-C₃N₄ (TCN) composites were synthesized by a simple pyrolysis method with TiO₂ xerogel and urea. The structure and physicochemical properties of TCN were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, ultraviolet-visible diffuse reflectance spectrum, X-ray photoelectron spectroscopy, N₂-adsorption isotherms and electrochemical impedance spectroscopy. Aniline Aerofloat was chosen as a typical degradation-resistant contaminant to investigate the photodegradation activity of TCN under UV irradiation. The results indicated that TCN had higher light absorption intensity, larger specific surface area and smaller particle size compared to pure TiO₂. Furthermore, TCN had great recycling photocatalytic stability for the photodegradation of Aniline Aerofloat. The photocatalytic activity depends on the synergistic reaction between holes (h⁺) and hydroxyl radicals (·OH). Meanwhile, the direct Z-scheme heterojunction structure of TiO₂ and g-C₃N₄ postpones the recombination of h⁺ and electrons to enhance UV-light photocatalytic activity.

Whether planar or corrugated graphitic carbon nitride combined with titanium dioxide exhibits better photocatalytic performance?

The density functional theory method was performed to study the electronic structures of planar (pGN), corrugated (cGN) graphitic carbon nitride and their interactions with titanium dioxide cluster (TiO₂)₇. The transfer of photoinduced electrons was analyzed and electronic excitations were calculated. The obtained results show that cGN is thermodynamically more stable than pGN. cGN chemically interacts with titanium dioxide clusters, while the interaction between pGN and the cluster is assigned to physical nature. The combination of cGN and pGN with (TiO₂)₇ reduces the energy of the first excited states compared to that of the pure substances. The photocatalytic activities were estimated based on hypotheses on the location of the reduction and oxidation sites, the distance between the photoinduced holes and electrons and the electron density of molecular orbitals involved in the excitation. cGN/TiO₂ is predicted to have a higher photocatalytic activity than pGN/TiO₂.

Titanium dioxide and graphitic carbon nitride-based nanocomposites and nanofibres for the degradation of organic pollutants in water: a review

The paper reviews graphitic carbon nitride-based nanostructured photocatalytic materials and nanofibres for applications in water purification. Titanium dioxide has shown unique features that continue to attract research and development (R&D) due to its unique properties such as availability, ultraviolet absorptivity, photocatalysis, adsorption of pollutants and solar cell engineering. Graphitic carbon nitride is an attractive photocatalyst due to its non-toxicity characteristics, good visible light absorption and good thermal and chemical stabilities. In water purification, nanofibres are currently noticed due to their distinctive properties of effective separation and sometimes elimination of organic pollutants in water. In this review, synthesis and utility of doped titanium dioxide and carbon nitride with metal nanoparticles and polymeric nanofibres from nanocomposites as effective materials for the degradation of organic contaminations from water are discussed. The history, current trends and future perspectives are highlighted.

An innovative magnetic Ni0.1Co0.9Fe2O4/g-C3N4 nano-micro-spherical heterojunction composite photocatalyst with an extraordinarily prominent visible-light-irradiation degradation performance toward organic pollutants

Environmental pollution removal is attracting more attention these days because of increasing environmental problems. The use of photodegradation catalysts is a promising avenue in resolving environmental issues and therefore high-performance photocatalysts are urgently needed. Herein, we solvothermally synthesized a micro-spherical g-C3N4 photocatalyst and a nanospherical Ni0.1Co0.9Fe2O4 photocatalyst, and then innovatively employed small amounts of Ni0.1Co0.9Fe2O4 nanospheres coupled with g-C3N4 microspheres to fabricate a novel magnetic Ni0.1Co0.9Fe2O4/g-C3N4 nano-micro-spherical heterojunction photocatalyst through post co-calcination. Various techniques, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform-infrared spectroscopy and UV-vis diffuse reflectance spectroscopy, were employed to analyze the as-synthesized hybrid photocatalyst. The resultant photocatalyst exhibits a record high photocatalytic degradation activity against methylene blue under visible-light irradiation with a 100% degradation rate within only 10 min, corresponding to an extraordinarily prominent degradation reaction rate constant k value of up to 0.586 min-1. Our strategy opens a new effective way for fabricating high-performance photocatalysts and our novel Ni0.1Co0.9Fe2O4/g-C3N4 heterojunction photocatalyst is of great potential for application in environmental treatments.

Phosphorus-doped inverse opal g-C3N4 for efficient and selective CO generation from photocatalytic reduction of CO2

In this work, inverse opal (IO) structure construction and phosphorus doping were combined to modify carbon nitride (g-C₃N₄) for the photocatalytic reduction of CO₂.

Effects of the preparation method of Pt/g-C3N4 photocatalysts on their efficiency for visible-light hydrogen production

Pt NPs have been loaded on ultrathin porous g-C₃N₄ nanosheets (CNS) by either a chemical reduction (CR) or a photoreduction (PR) method. The Pt/CNS-CR photocatalyst shows a much higher efficiency for H₂ evolution than that of the Pt/CNS-PR.