A combination of monoacylglycerol crystalline network and hydrophilic antioxidants synergistically enhances the oxidative stability of gelled algae oil

Oleogel classification, physicochemical characterization methods, and typical cases of application in food: a review

The harmful effects of trans and saturated fatty acids have attracted worldwide attention. Edible oleogels, which can structure liquid oils, are promising healthy alternatives to traditional fats. Active research on oleogels is focused on the interaction between unsaturated oils with different fatty acid compositions and low molecular weight or polymer oleogels. The unique network structure inside oleogels has facilitated their application in candies, spreads, meat, and other products. However, the micro- and macro-properties, as well as the functional properties of oleogels vary by preparation method and the system composition. This review discusses the characteristics of oleogels, serving as a reference for the application of oleogels in food products. Specifically, it (i) classifies oleogels and explains the influence of gelling factors on their gelation, (ii) describes the methods for measuring the physicochemical properties of oleogels, and (iii) discusses the current applications of oleogels in food products.

Oleofoams stabilized by monoacylglycerides: Impact of chain length and concentration

Oleofoams are plant oil based whipped systems which have drawn academic and industry attention in recent years. The aim of this study was to determine the effect of fatty acid chain length and monoacylglyceride (MAG) concentration on the performance and structural properties of MAG-based oleofoams. Four different MAGs (monolaurin, monomyrystin, monopalmitin, and monostearin) were studied at three concentration levels (5, 10, and 15 wt%). The fatty acid chain length had a statistically significant impact on the size and shape of crystals formed, while higher MAG concentrations led to higher numbers of crystals in the continuous oil phase. These differences affected the performance and physical properties of the oleofoams: compared to other MAGs, monostearin based oleofoams were harder and exhibited higher values of G' and G″, had higher overrun and showed better stability. Lastly, through microscopy techniques it was successfully proved that monostearin-based oleofoams are stabilized by both bulk and Pickering stabilization.

Differences of wax-based emulsion gel in 3D printing performance: Crystal distribution and droplet stability

Six kinds of natural waxes were used for emulsion gels preparation. The differences in printing performance were explored based on the crystal distribution and droplet stability. Firstly, the effect of crystal distribution was investigated through microstructures and rheological properties. It was found that the dense crystal network/interfacial crystallization could stabilize the droplet and provide modulus to ensure the self-supporting behavior after printing, whereas excessive crystal could lead to droplet rupture and coalescence. Furthermore, all emulsion gels could recrystallize by heating, which could enhance the performance of 3D printing. Then, the droplet stability was investigated after storing/freeze-thawing. It was found that emulsion gels with dense crystal networks/interfacial crystallization had more stable droplets, which ensure the continuous extrusion during printing. Finally, printing performance was investigated comprehensively. Three emulsion gels with denser crystal networks/interfacial crystallization had higher recovery rates (16.17-21.15%) and more stable droplets, which perform better in 3D printing correspondingly.

The oxidative quality of bi-, oleo- and emulgels and their bioactives molecules delivery

During recent years, the applicability of bi-, oleo- and emulgels has been widely studied, proving several advantages as compared to conventional fats, such as increasing the unsaturated fat content of products and being more sustainable for temperate regions as compared to tropical fats. Moreover, these alternative fat systems improve the nutritional profile, increase the bioavailability of bioactive compounds, and can be used as preservation films and markers for the inactivation of pathogens, while in 3D printing facilitate the obtaining of superior food products. Furthermore, bi-, oleo- and emulgels offer food industries efficient, innovative, and sustainable alternatives to animal fats, shortenings, margarine, palm and coconut oil due to the nutritional improvements. According to recent studies, gels can be used as ingredients for the total or partial replacement of saturated and trans fats in the meat, bakery and pastry industry. The evaluation of the oxidative quality of this gelled systems is significant because the production process involves the use of heat treatments and continuous stirring where large amounts of air can be incorporated. The aim of this literature review is to provide a synthesis of studies to better understand the interaction of components and to identify future improvements that can be applied in oil gelling technology. Generally, higher temperatures used in obtaining polymeric gels, lead to more oxidation compounds, while a higher concentration of structuring agents leads to a better protection against oxidation. Due to the gel network ability to function as a barrier against oxidation factors, gelled matrices are able to provide superior protection for the bioactive compounds. The release percentage of bioactive molecules can be regulated by formulating the gel matrix (type and concentration of structuring agents and type of oil). In terms of food products, future research may include the use of antioxidants to improve the oxidative stability of the reformulated products.

The Biochemistry and Effectiveness of Antioxidants in Food, Fruits, and Marine Algae

It is more effective to maintain good health than to regain it after losing it. This work focuses on the biochemical defense mechanisms against free radicals and their role in building and maintaining antioxidant shields, aiming to show how to balance, as much as possible, the situations in which we are exposed to free radicals. To achieve this aim, foods, fruits, and marine algae with a high antioxidant content should constitute the basis of nutritional elements, since natural products are known to have significantly greater assimilation efficiency. This review also gives the perspective in which the use of antioxidants can extend the life of food products, by protecting them from damage caused by oxidation as well as their use as food additives.

Systematic comparison of structural and lipid oxidation in oil-in-water and water-in-oil biphasic emulgels: effect of emulsion type, oil-phase composition, and oil fraction

BACKGROUND

Because many common foods are emulsions (mayonnaise, margarine, salad dressing, etc.), a better understanding of lipid oxidation is crucial for the formulation, production, and storage of the relevant consumer products. We prepared oil-in-water (O/W) and water-in-oil (W/O) emulgels, and their architecture was characterized before monitoring lipid oxidation under thermally accelerated conditions to systematically compare the effect of emulsion type, oil composition, and oil fraction on the structure and lipid oxidation in thee biphasic emulgel systems.

RESULTS

Higher susceptibility of lipids to oxidation (>2.5 times) was observed in the biphasic O/W and W/O emulgels than in soybean oil owing to an interfacial region. In the heterogeneous emulsion systems, W/O emulgels had oxidation resistance than O/W emulgels did. Compared with the oil-phase composition of high oleic sunflower, soybean, and flaxseed oils, oxidation sensitivity of emulsified lipids was significantly raised as the degree of unsaturation increased from 100.72 to 203.07. Moreover, increasing oil fraction from 75% to 85% led to an obvious increase in total oxidation in O/W emulgels but a decrease in W/O emulgels. In addition to emulsion size and oil unsaturation, viscoelasticity had a remarkable effect on the low-unsaturated oil oxidation (e.g. high oleic sunflower oil).

CONCLUSION

Physical and structural phenomena played important roles in lipid oxidation based on a mass transport principle. These findings provide novel information for designing the structures of emulsion gels for controlling lipid oxidation through the cooperation of both formulation and architecture principles. © 2022 Society of Chemical Industry.

Application of Analytical Methods for the Comprehensive Analysis of Oleogels-A Review

Numerous empirical studies have already been conducted on the innovative fat-replacing system defined as oleogel, creating a real urge for setting up a framework for future research, rather than conducting studies with arbitrary methods. This study re-evaluates the utility of some analyses and states some conclusions in order to eliminate the reluctance of food processors and consumers towards the utilization of oleogels as ingredients. The review presents extensively the methods applied for the characterization of various oleogels, while highlighting their addressability or inconveniences. The discussed methods were documented from the research published in the last five years. A classification of the methods is proposed based on their aims or the utility of the results, which either describe the nano-structure and the network formation, the quality of the resulting oleogel or its suitability as food ingredient or other edible purposes. The general conclusions drawn for some classes of oleogels were also revisited, in order to ease the understanding of the oleogel behaviour, to encourage innovative research approaches and to stimulate the progress in the state of art of knowledge.

Influence of lipid nanoparticle physical state on β-carotene stability kinetics under different environmental conditions

Carotenoids are lipophilic compounds that provide important health-related benefits for human body functions. However, they have low water solubility and chemical stability, hence their incorporation in aqueous-based foods requires the use of emulsion-based lipid carriers. This work aimed at elucidating whether their inclusion in emulsion-based Solid Lipid Nanoparticles (SLNs) can provide a protective effect against β-carotene degradation under different environmental conditions in comparison to liquid lipid nanoemulsions. Glyceryl Stearate (GS) was mixed with Medium Chain Trygliceride (MCT) oil to formulate SLNs. SLNs presented a significantly enhanced β-carotene retention and a slower β-carotene degradation kinetics at increasing storage temperature, acidic conditions and light exposure. In fact, SLNs formulated with 5% GS in the lipid phase and stored at 4 °C and pH 7 retained almost 70% of the initially encapsulated β-carotene after 55 days of storage, while it was completely degraded when it was encapsulated in liquid nanoemulsions. Moreover, it was observed that the solid lipid type affects the protective effect that SLNs may confer to the encapsulated lipophilic bioactives. Saturated long chain triglycerides, such as hydrogenated palm oil (HPO) presented slower and lower β-carotene degradation kinetics in comparison to solid lipids composed of MCT, such as Coconut Oil (CNUT) or MCT + 5% of GS in the lipid phase. This work evidences that the incorporation of lipophilic bioactive compounds, such as β-carotene, into SLNs slows down their degradation kinetics which might be attributed to a reduced diffusion of the oxidative species due to the lipid crystalline structure.

Formation and Stabilization of W1/O/W2 Emulsions with Gelled Lipid Phases

Water-in-oil-in-water (W₁/O/W₂) emulsions are emulsion-based systems where the dispersed phase is an emulsion itself, offering great potential for the encapsulation of hydrophilic bioactive compounds. However, their formation and stabilization is still a challenge mainly due to water migration, which could be reduced by lipid phase gelation. This study aimed to assess the impact of lipid phase state being liquid or gelled using glyceryl stearate (GS) at 1% (w/w) as well as the hydrophilic emulsifier (T80: Tween 80 or lecithin) and the oil type (MCT:medium chain triglyceride or corn oil (CO) as long chain triglyceride) on the formation and stabilization of chlorophyllin W₁/O/W₂ emulsions. Their colloidal stability against temperature and light exposure conditions was evaluated. Gelling both lipid phases (MCT and CO) rendered smaller W₁ droplets during the first emulsification step, followed by formation of W₁/O/W₂ emulsions with smaller W₁/O droplet size and more stable against clarification. The stability of W₁/O/W₂ emulsions was sensitive to a temperature increase, which might be related to the lower gelling degree of the lipid phase at higher temperatures. This study provides valuable insight for the formation and stabilization of W₁/O/W₂ emulsions with gelled lipid phases as delivery systems of hydrophilic bioactive compounds under common food storage conditions.

How To Stabilize ω-3 Polyunsaturated Fatty Acids (PUFAs) in an Animal Feeding Study?-Effects of the Temperature, Oxygen Level, and Antioxidant on Oxidative Stability of ω-3 PUFAs in a Mouse Diet

Substantial studies have shown that ω-3 polyunsaturated fatty acids (PUFAs) have various health-promoting effects; however, there are inconsistent results from animal studies that showed that ω-3 PUFAs have no effects or even detrimental effects. Emerging research suggests that oxidized ω-3 PUFAs have different effects compared to unoxidized ω-3 PUFAs; therefore, lipid oxidation of dietary ω-3 PUFAs could contribute to the mixed results of ω-3 PUFAs in animal studies. Here, we prepared an AIN-93G-based, semi-purified, powder diet, which is one of the most commonly used rodent diets in animal studies, to study the oxidative stability of fortified ω-3 PUFAs in animal feed. We found that lowering the storage temperature or the addition of a certain antioxidant, notably tert-butylhydroquinone (TBHQ), helps to stabilize ω-3 PUFAs and suppress ω-3 oxidation in the animal diet, while reducing the level of oxygen in the storage atmosphere is not very effective. The addition of 50 ppm of TBHQ in the diet inhibited 99.5 ± 0.1% formation of primary oxidation products and inhibited 96.1 ± 0.7% formation of secondary oxidation products, after 10 days of storage of the prepared diet at a typical animal-feeding experiment condition. Overall, our results highlight that ω-3 PUFAs are highly prone to lipid oxidation in a typical animal-feeding experiment, emphasizing the critical importance to stabilize ω-3 PUFAs in animal studies.

Physical properties and cookie-making performance of oleogels prepared with crude and refined soybean oil: a comparative study

The objective of this research was to fabricate crude soybean oil oleogels (CSO) using β-sitosterol (BS) and/or monoacylglycerol (MAG) and compare their role with that of refined soybean oil oleogels (RSO) in cookie making. Both crude and refined soybean oil oleogels were formed with BS or MAG, or the combination of both (1 : 1) at a fixed concentration of 10 wt%. The thermal behavior of the oleogels was measured using differential scanning calorimetry (DSC). The crystal structure and morphology of the oleogels were characterized using X-ray diffraction (XRD) and polarized light microscopy (PLM). The hardness of the oleogel and commercial vegetable shortening was compared using a texture analyzer. The characteristics of cookies made with the oleogels were compared with those of cookies made with commercial vegetable shortening. Overall, the incorporation of BS and/or MAG into crude and refined soybean oil can produce oleogels with solid-like properties. Refined soybean oil formed stronger and firmer oleogels as compared to crude soybean oil. RSO structured by BS presented branched fiber-like, elongated plate-like, and needle-like crystals while the same oil gelled by MAG contained spherulite crystals. RSO made with the combination of BS and MAG displayed crystal morphologies from both BS and MAG. The same crystal morphologies were observed in CSO with lower quantities. Comparing the quality of cookies made with the oleogels and commercial vegetable shortening, equal or better performance of both RSO and CSO in terms of weight, thickness, width, spread ratio, and hardness of cookies than that of commercial vegetable shortening was observed. By combining the results of the physical characterization and cookie making performance, it can be concluded that both crude and refined soybean oleogels could resemble commercial shortening, which offers the possibility of using oleogels to replace shortening in the baking industry.

Tailoring Properties of Mixed-Component Oleogels: Wax and Monoglyceride Interactions Towards Flaxseed Oil Structuring

The combination of oleogelators in oil structuring has an untapped potential, since effective pairs have usually been found by serendipity. The aim of this work was to evaluate the combination of berry (BEW) or sunflower wax (SHW) with glycerol monostearate (GMS) in flaxseed oil (FXO) at 5 and 25 °C. The thermal and mechanical properties, microstructure, and stability of oleogels were investigated. Self-standing and translucent gels were obtained from BEW in FXO. However, the mixture BEW:GMS resulted in a decrease of dynamic moduli. Moreover, changes in the crystal network and a reduction of oil binding capacity were noticed. Thus, the GMS prevented the complete organization of BEW in polyunsaturated chains of FXO. Conversely, a positive interaction was found for GMS:SHW, since both alone were not able to impart the structure in FXO. Interestingly, gel was formed with improved properties, even with a small addition of GMS, although an ideal ratio of 1:1 (GMS50:50SHW) was found. Oxidative stability analysis showed that all gels resembled the behavior of liquid oil (~12.00 meqO₂/kg) over 30 days storage. Therefore, semi-solid systems with nutritional and techno-functional claims were created by using waxes and fatty-acid derivative oleogelator in a rational fashion; this opened the opportunity to tailor oleogel properties.

Formation, characterization, and potential food application of rice bran wax oleogels: Expeller-pressed corn germ oil versus refined corn oil

The expeller-pressed (EP) corn germ oil oleogels were prepared using rice bran wax (RBX) at different concentrations (3, 5, 7, and 9 wt%). Their structural properties, including color, hardness, thermal behavior, rheological property, and crystal structure were evaluated. The performance of oleogels for potential food application was examined by incorporating oleogels into cookies as a fully replacement for commercial shortenings. Overall, RBX could form oleogels in both refined and EP corn germ oils at a concentration ≥3 wt%. Refined corn oil produced a stronger gel than crude corn oil. When comparing cookie characteristics, cookies made with both types of oleogels showed similar properties with commercial cookies. This result indicates that oleogels made by refined and EP corn germ oil together with RBX have the potential to imitate the functionality of commercial shortening in the baking industry.