Hydrogel-incorporating unit in a well: 3D cell culture for high-throughput analysis

Development of a novel high-throughput culture system for hypoxic 3D hydrogel cell culture

Animal models lack physiologic relevance to the human system which results in low clinical translation of results derived from animal testing. Besides spheroids or organoids, hydrogel-based 3D in vitro models are used to mimic the in vivo situation increasing the relevance while reducing animal testing. However, to establish hydrogel-based 3D models in applications such as drug development or personalized medicine, high-throughput culture systems are required. Furthermore, the integration of oxygen-reduced (hypoxic) conditions has become increasingly important to establish more physiologic culture models. Therefore, we developed a platform technology for the high-throughput generation of miniaturized hydrogels for 3D cell culture. The Oli-Up system is based on the shape of a well-plate and allows for the parallel culture of 48 hydrogel samples, each with a volume of 15 µl. As a proof-of-concept, we established a 3D culture of gelatin-methacryloyl (GelMA)-encapsulated mesenchymal stem/stromal cells (MSCs). We used a hypoxia reporter cell line to establish a defined oxygen-reduced environment to precisely trigger cellular responses characteristic of hypoxia in MSCs. In detail, the expression of hypoxia response element (HRE) increased dependent on the oxygen concentration and cell density. Furthermore, MSCs displayed an altered glucose metabolism and increased VEGF secretion upon oxygen-reduction. In conclusion, the Oli-Up system is a platform technology for the high-throughput culture of hydrogel-based 3D models in a defined oxygen environment. As it is amenable for automation, it holds the potential for high-throughput screening applications such as drug development and testing in more physiologic 3D in vitro tissue models.

A long-term storable gel-laden chip composite built in a multi-well plate enablingin situcell encapsulation for high-throughput liver model

Hydrogels are widely used as scaffold materials for constructingin vitrothree-dimensional microphysiological systems. However, their high sensitivity to various external cues hinders the development of hydrogel-laden, microscale, and high-throughput chips. Here, we have developed a long-term storable gel-laden chip composite built in a multi-well plate, which enablesin situcell encapsulation and facilitates high-throughput analysis. Through optimized chemical crosslinking and freeze-drying method (C/FD), we have achieved a high-quality of gel-laden chip composite with excellent transparency, uniform porosity, and appropriate swelling and mechanical characteristics. Besides collagen, decellularized extracellular matrix with tissue-specific biochemical compound has been applied as chip composite. As a ready-to-use platform,in situcell encapsulation within the gel has been achieved through capillary force generated during gel reswelling. The liver-mimetic chip composite, comprising HepG2 cells or primary hepatocytes, has demonstrated favorable hepatic functionality and high sensitivity in drug testing. The developed fabrication process with improved stability of gels and storability allows chip composites to be stored at a wide range of temperatures for up to 28 d without any deformation, demonstrating off-the-shelf products. Consequently, this provides an exceptionally simple and long-term storable platform that can be utilized for an efficient tissue-specific modeling and various biomedical applications.

A Comparative Inflammation-on-a-Chip with a Complete 3D Interface: Pharmacological Applications in COPD-Induced Neutrophil Migration

Chronic obstructive pulmonary disease (COPD) is a slow-progressing inflammatory lung disease that is associated with high mortality and disability. There is a lack of appropriate preclinical models of COPD, which hampers drug discovery efforts. Herein, a comparative inflammation-on-a-chip (IoC) is developed with a complete 3D interface without the formation of any micropillar and phaseguide structures that replicated chemoattractant-induced neutrophil transendothelial migration (NTEM), a key feature of COPD. The IoC model is used to evaluate the pharmacological effects of CXCR2 inhibitors (MK-7123, AZD5069, and SB225002) on the migration of neutrophil-like cells in the presence of plasma samples from patients with COPD. This is the first study to evaluate inhibitors of CXCR2-dependent NTEM in a comparative IoC model that mimics the physiological 3D microenvironment, consisting of an endothelial barrier, extracellular compartment, and inflammatory conditions. This IoC model will be useful to investigate COPD severity using patient samples, and will aid basic and translational research involving NTEM.

Stretchable Sponge-Based Electrochemical Biosensor for Real-Time Sensing of Cells in Three-Dimensional Culture

For the study of cell biology, real-time information on cell physiological processes will be more accurate and closer to the in vivo condition in a three-dimensional (3D) culture system. Although most reported 3D cell culture scaffolds can better mimic the in vivo dynamic microenvironment, the real-time analysis technique is deficient or lacking. Herein, a stretchable and conductive 3D scaffold is developed to construct an electrochemical biosensor for real-time monitoring of cell release in 3D culture under stimulation of drug stimulant and mechanical force. In our design, the polyurethane sponge (PU) dipped with conductive carbon ink (CC/PU) was used as a conductive scaffold, and gold nanoparticles (nano-Au) were electrodeposited on the CC/PU (nano-Au CC/PU) to improve the electrochemical sensing performance. The prepared nano-Au CC/PU scaffold exhibits a good electrocatalytic ability to H2O2 with a linear range from 20 nM to 43 μM. Due to the great biocompatibility, HeLa cells can be cultured directly on the nano-Au CC/PU and the in situ and real-time tracking of H2O2 secretion from cells was achieved. The results demonstrate that both the drug stimulant and mechanical force can rapidly activate the release of reactive oxygen species. This study indicates that the stretchable 3D sensing scaffold has good potential for cell biology research in an in vivo-like microenvironment and can be extensively used in the fields of tissue engineering, drug screening, and pathological research.

A 'print-pause-print' protocol for 3D printing microfluidics using multimaterial stereolithography

Methods to make microfluidic chips using 3D printers have attracted much attention because these simple procedures allow rapid fabrication of ready-to-use products from digital 3D designs with minimal human intervention. Printing high-resolution chips that are simultaneously transparent, biocompatible and contain regions of dissimilar materials is an ongoing challenge. Transparency allows for the optical inspection of specimens containing cells and labeled biomolecules inside the chip. Being able to use different materials for different layers in the product increases the number of potential applications. In this 'print-pause-print' protocol, we describe detailed strategies for fabricating transparent biomicrofluidic devices and multimaterial chips using stereolithographic 3D printing. To print transparent biomicrofluidic chips, we developed a transparent resin based on poly(ethylene glycol) diacrylate (PEG-DA) (average molecular weight: 250 g/mol, PEG-DA-250) and a smooth chip surface technique achieved using glass. Cells can be successfully cultured and visualized on PEG-DA-250 prints and inside PEG-DA-250 microchannels. The multimaterial potential of the technique is exemplified using a molecular diffusion device that comprises parts made of two different materials: the channel walls, which are water impermeable, and a porous barrier structure, which is permeable to small molecules that diffuse through it. The two materials were prepared from two different molecular-weight PEG-DA-based printing resins. Alignment of the two dissimilar material structures is performed automatically by the printer during the printing process, which only requires a simple pause step to exchange the resins. The procedure takes less than 1 h and can facilitate chip-based applications including biomolecule analysis, cell biology, organ-on-a-chip and tissue engineering.

Stepwise molecular mechanisms responsible for chemoresistance in bladder cancer cells

Chemotherapy resistance is an obstacle to cancer therapy and is considered a major cause of recurrence. Thus, understanding the mechanisms of chemoresistance is critical to improving the prognosis of patients. Here, we have established a stepwise gemcitabine-resistant T24 bladder cancer cell line to understand the molecular mechanisms of chemoresistance within cancer cells. The characteristics of the stepwise chemoresistance cell line were divided into 4 phases (parental, early, intermediate, and late phases). These four phase cells showed increasingly aggressive phenotypes in vitro and in vivo experiments with increasing phases and revealed the molecular properties of the biological process from parent cells to phased gemcitabine-resistant cell line (GRC). Taken together, through the analysis of gene expression profile data, we have characterized gene set of each phase indicating the response to anticancer drug treatment. Specifically, we identified a multigene signature (23 genes including GATA3, APOBEC3G, NT5E, MYC, STC1, FOXD1, SMAD9) and developed a chemoresistance score consisting of that could predict eventual responsiveness to gemcitabine treatment. Our data will contribute to predicting chemoresistance and improving the prognosis of bladder cancer patients.

A high-throughput biomimetic bone-on-a-chip platform with artificial intelligence-assisted image analysis for osteoporosis drug testing

Although numerous organ-on-a-chips have been developed, bone-on-a-chip platforms have rarely been reported because of the high complexity of the bone microenvironment. With an increase in the elderly population, a high-risk group for bone-related diseases such as osteoporosis, it is essential to develop a precise bone-mimicking model for efficient drug screening and accurate evaluation in preclinical studies. Here, we developed a high-throughput biomimetic bone-on-a-chip platform combined with an artificial intelligence (AI)-based image analysis system. To recapitulate the key aspects of natural bone microenvironment, mouse osteocytes (IDG-SW3) and osteoblasts (MC3T3-E1) were cocultured within the osteoblast-derived decellularized extracellular matrix (OB-dECM) built in a well plate-based three-dimensional gel unit. This platform spatiotemporally and configurationally mimics the characteristics of the structural bone unit, known as the osteon. Combinations of native and bioactive ingredients obtained from the OB-dECM and coculture of two types of bone cells synergistically enhanced osteogenic functions such as osteocyte differentiation and osteoblast maturation. This platform provides a uniform and transparent imaging window that facilitates the observation of cell-cell interactions and features high-throughput bone units in a well plate that is compatible with a high-content screening system, enabling fast and easy drug tests. The drug efficacy of anti-SOST antibody, which is a newly developed osteoporosis drug for bone formation, was tested via β-catenin translocation analysis, and the performance of the platform was evaluated using AI-based deep learning analysis. This platform could be a cutting-edge translational tool for bone-related diseases and an efficient alternative to bone models for the development of promising drugs.

Culture and in situ H2O2-mediated electrochemical study of cancer cells using three-dimensional scaffold based on graphene foam coated with Fe3O4 nanozyme

For real-time evaluation of the cell behavior and function under in vivo-like 3D environment, the 3D functionalized scaffolds simultaneously integrate the function of 3D cell culture, and electrochemical sensing is a convincing candidate. Herein, Fe₃O₄ nanoparticles as the nanozyme (peroxide oxidase mimics) were modified on graphene foam scaffold to construct a 3D integrated platform. The platform displayed a wide linear range of 100 nM to 20 μM and a high sensitivity of 53.2 nA μM^-1 toward detection of hydrogen peroxide (H₂O₂) under the working potential of + 0.6 V (vs. Ag/AgCl). The obtained 3D scaffold also displayed satisfactory selectivity toward the possible interferents that appeared in the cell culture environment. Furthermore, the cells still maintained high cell viability (almost 100%) after their growth and proliferation on the scaffold for 7 days. With the superior performance on cell culture and electrochemical monitoring, the functions on the 3D culture of MCF-7 or HeLa cells and in situ monitoring of cell-released H₂O₂ was easily achieved on this 3D platform, which show its great application prospects on further cancer-related disease diagnosis or drug screening. A nanozyme-based three-dimensional graphene scaffold was successfully constructed for cell culture and identification of cancer cells through in situ electrochemical monitoring of the cell-released H₂O₂.

Inhibition of tumor progression and M2 microglial polarization by extracellular vesicle-mediated microRNA-124 in a 3D microfluidic glioblastoma microenvironment

Background: Glioblastoma (GBM) is one of the most aggressive types of brain cancer. GBM progression is closely associated with microglia activation; therefore, understanding the regulation of the crosstalk between human GBM and microglia may help develop effective therapeutic strategies. Elucidation of efficient delivery of microRNA (miRNA) via extracellular vesicles (EVs) and their intracellular communications is required for therapeutic applications in GBM treatment. Methods: We used human GBM cells (U373MG) and human microglia. MiRNA-124 was loaded into HEK293T-derived EVs (miR-124 EVs). Various anti-tumor effects (proliferation, metastasis, chemosensitivity, M1/M2 microglial polarization, and cytokine profile) were investigated in U373MG and microglia. Anti-tumor effect of miR-124 EVs was also investigated in five different patient-derived GBM cell lines (SNU-201, SNU-466, SNU-489, SNU-626, and SNU-1105). A three-dimensional (3D) microfluidic device was used to investigate the interactive microenvironment of the tumor and microglia. Results: MiR-124 EVs showed highly efficient anti-tumor effects both in GBM cells and microglia. The mRNA expression levels of tumor progression and M2 microglial polarization markers were decreased in response to miR-124 EVs. The events were closely related to signal transducer and activator of transcription (STAT) 3 signaling in both GBM and microglia. In 3D microfluidic experiments, both U373MG and microglia migrated to a lesser extent and showed less-elongated morphology in the presence of miR-124 EVs compared to the control. Analyses of changes in cytokine levels in the microfluidic GBM-microglia environment showed that the treatment with miR-124 EVs led to tumor suppression and anti-cancer immunity, thereby recruiting natural killer (NK) cells into the tumor. Conclusions: In this study, we demonstrated that EV-mediated miR-124 delivery exerted synergistic anti-tumor effects by suppressing the growth of human GBM cells and inhibiting M2 microglial polarization. These findings provide new insights toward a better understanding of the GBM microenvironment and provide substantial evidence for the development of potential therapeutic strategies using miRNA-loaded EVs.

Recapitulating Tumorigenesis in vitro: Opportunities and Challenges of 3D Bioprinting

Cancer is considered one of the most predominant diseases in the world and one of the principal causes of mortality per year. The cellular and molecular mechanisms involved in the development and establishment of solid tumors can be defined as tumorigenesis. Recent technological advances in the 3D cell culture field have enabled the recapitulation of tumorigenesis in vitro, including the complexity of stromal microenvironment. The establishment of these 3D solid tumor models has a crucial role in personalized medicine and drug discovery. Recently, spheroids and organoids are being largely explored as 3D solid tumor models for recreating tumorigenesis in vitro. In spheroids, the solid tumor can be recreated from cancer cells, cancer stem cells, stromal and immune cell lineages. Organoids must be derived from tumor biopsies, including cancer and cancer stem cells. Both models are considered as a suitable model for drug assessment and high-throughput screening. The main advantages of 3D bioprinting are its ability to engineer complex and controllable 3D tissue models in a higher resolution. Although 3D bioprinting represents a promising technology, main challenges need to be addressed to improve the results in cancer research. The aim of this review is to explore (1) the principal cell components and extracellular matrix composition of solid tumor microenvironment; (2) the recapitulation of tumorigenesis in vitro using spheroids and organoids as 3D culture models; and (3) the opportunities, challenges, and applications of 3D bioprinting in this area.

A Three-Dimensional Electrochemical Biosensor Integrated with Hydrogel Enables Real-Time Monitoring of Cells under Their In Vivo-like Microenvironment

Three-dimensional (3D) cell culture can better reproduce the in vivo cell environment and has been extensively used in fields such as tissue engineering, drug screening, and pathological research. Despite the tremendous advancement of 3D cultures, an analysis technique that could collect real-time information of the biological processes therein is sorely lacking. Electrochemical sensing with fast response and high sensitivity has played a vital role in real-time monitoring of living cells, but most current sensors are based on planar electrodes and fail to perfectly match the 3D cell culture matrix. Herein, we developed a robust 3D electrochemical sensor based on functionalized graphene foam (GF), which could be integrated with hydrogels for the 3D culture and in situ monitoring of cells for the first time. Specifically, platinum nanoparticles (Pt NPs) electrodeposited on GF (GF/Pt NPs) conferred the prominent electrochemical sensing performance, and the anti-fouling coating of poly(3,4-ethylenedioxythiophene) (PEDOT) endowed the GF/Pt NPs electrode with greatly improved stability. As a proof of concept, collagen hydrogel with microglia seeded in was filled into the interspace of the 3D GF/Pt NPs/PEDOT sensor to establish an integrated platform, which allowed the successful real-time monitoring of reactive oxygen species released from microglia in the collagen matrix. Given the versatility, our proposed biosensor in conjunction with various 3D culture models will serve as an excellent tool to provide biochemical information of cells under their in vivo-like microenvironment.

Programmable multilayer printing of a mechanically-tunable 3D hydrogel co-culture system for high-throughput investigation of complex cellular behavior

Hydrogels are widely used as a 3D cell culture platform, as they can be tailored to provide suitable microenvironments to induce cellular phenotypes with physiological significance. Hydrogels are especially deemed attractive as a co-culture platform, in which two or more different types of cells are cultured together in close proximity, since the spatial distribution of different cell types can be rendered possible by advanced microfabrication schemes. Herein, programmable multilayer photolithography is employed to develop a 3D hydrogel-based co-culture system in an efficient and scalable manner, which consists of an inner microgel array containing one cell type covered by an outer hydrogel overlay containing another cell type. In particular, the mechanical properties of microgel array and hydrogel overlay are independently controlled in a wide range, with elastic moduli ranging from 1.7 to 31.6 kPa, allowing the high-throughput investigation of both individual hydrogel mechanics and mechanical gradients generated at their interface. Utilizing this system, phenotypical changes (i.e. proliferation, spheroid formation and Mφ polarization) of macrophages encapsulated in microgel array, in response to complex mechanical microenvironment and co-cultured fibroblasts, are comprehensively explored.

High-throughput cell migration assay under combinatorial chemical environments by a novel 24-well-plate based device

The quantitative studies of cell proliferation and migration under different chemical environments are important for both scientists and clinicians searching for new therapeutics. In this study, we developed a new device to pattern several types of cells in 24-well-plate and demonstrated its' application in cancer cell proliferation and migration assay. The new device combined 3D-printed-silica-part for multi cell types loading with PDMS-through-hole-layer-part for cell micro-patterning which was matched with commercial 24-well-plate. This 24-well-plate based device is flexible and feasible in many applications and can be used in one piece or multi pieces. Besides the application for two types of cells proliferation and migration assay in one chemical condition, as a demonstration, the migration behaviors of four types of cells under 24 types of EGF + bFGF combinatorial conditions were studied. We believed this device could be widely used in clinical searching for new anti-cancer therapeutics and other related studies.

Microfluidic three-dimensional cell culture of stem cells for high-throughput analysis

Although the recent advances in stem cell engineering have gained a great deal of attention due to their high potential in clinical research, the applicability of stem cells for preclinical screening in the drug discovery process is still challenging due to difficulties in controlling the stem cell microenvironment and the limited availability of high-throughput systems. Recently, researchers have been actively developing and evaluating three-dimensional (3D) cell culture-based platforms using microfluidic technologies, such as organ-on-a-chip and organoid-on-a-chip platforms, and they have achieved promising breakthroughs in stem cell engineering. In this review, we start with a comprehensive discussion on the importance of microfluidic 3D cell culture techniques in stem cell research and their technical strategies in the field of drug discovery. In a subsequent section, we discuss microfluidic 3D cell culture techniques for high-throughput analysis for use in stem cell research. In addition, some potential and practical applications of organ-on-a-chip or organoid-on-a-chip platforms using stem cells as drug screening and disease models are highlighted.