Multiplexed immunoassay using post-synthesis functionalized hydrogel microparticles

Efficient isolation of encoded microparticles in a degassed micromold for highly sensitive and multiplex immunoassay with signal amplification

Multiplex detection of low-abundance protein biomarkers in biofluids can contribute to diverse biomedical fields such as early diagnosis and precision medicine. However, conventional techniques such as digital ELISA, microarray, and hydrogel-based assay still face limitations in terms of efficient protein detection due to issues with multiplexing capability, sensitivity, or complicated assay procedures. In this study, we present the degassed micromold-based particle isolation technique for highly sensitive and multiplex immunoassay with enzymatic signal amplification. Using degassing treatment of nanoporous polydimethylsiloxane (PDMS) micromold, the encoded particles are isolated in the mold within 5 min absorbing trapped air bubbles into the mold by air suction capability. Through 10 min of signal amplification in the isolated spaces by fluorogenic substrate and horseradish peroxidase labeled in the particle, the assay signal is amplified with one order of magnitude compared to that of the standard hydrogel-based assay. Using the signal amplification assay, vascular endothelial growth factor (VEGF) and chorionic gonadotropin beta (CG beta), the preeclampsia-related protein biomarkers, are quantitatively detected with a limit of detection (LoD) of 249 fg/mL and 476 fg/mL in phosphate buffer saline. The multiplex immunoassay is conducted to validate negligible non-specific detection signals and robust recovery rates in the multiplex assay. Finally, the VEGF and CG beta in real urine samples are simultaneously and quantitatively detected by the developed assay. Given the high sensitivity, multiplexing capability, and process simplicity, the presented particle isolation-based signal amplification assay holds significant potential in biomedical and proteomic fields.

Synthesis of eco-friendly multifunctional dextran microbeads for multiplexed assays

There has been an increasing demand for simultaneous detection of multiple analytes in one sample. Microbead-based platforms have been developed for multiplexed assays. However, most of the microbeads are made of non-biodegradable synthetic polymers, leading to environmental and human health concerns. In this study, we developed an environmentally friendly dextran microbeads as a new type of multi-analyte assay platform. Biodegradable dextran was utilized as the primary material. Highly uniform magnetic dextran microspheres were successfully synthesized using the Shirasu porous glass (SPG) membrane emulsification technique. To enhance the amount of surface functional groups for ligand conjugation, we coated the dextran microbeads with a layer of dendrimers via a simple electrostatic adsorption process. Subsequently, a unique and efficient click chemistry coupling technique was developed for the fluorescence encoding of the microspheres, enabling multiplexed detection. The dextran microbeads were tested for 3-plex cytokine analysis, and exhibited excellent biocompatibility, stable coding signals, low background noise and high sensitivity.

Real-Time Signal Analysis with Wider Dynamic Range and Enhanced Sensitivity in Multiplex Colorimetric Immunoassays Using Encoded Hydrogel Microparticles

The simultaneous quantification of multiple proteins is crucial for accurate medical diagnostics. A promising technology, the multiplex colorimetric immunoassay using encoded hydrogel microparticles, has garnered attention, due to its simplicity and multiplex capabilities. However, it encounters challenges related to its dynamic range, as it relies solely on the colorimetric signal analysis of encoded hydrogel microparticles at the specific time point (i.e., end-point analysis). This necessitates the precise determination of the optimal time point for the termination of the colorimetric reaction. In this study, we introduce real-time signal analysis to quantify proteins by observing the continuous colorimetric signal change within the encoded hydrogel microparticles. Real-time signal analysis measures the "slope", the rate of the colorimetric signal generation, by focusing on the kinetics of the accumulation of colorimetric products instead of the colorimetric signal that appears at the end point. By developing a deep learning-based automatic analysis program that automatically reads the code of the graphically encoded hydrogel microparticles and obtains the slope by continuously tracking the colorimetric signal, we achieved high accuracy and high throughput analysis. This technology has secured a dynamic range more than twice as wide as that of the conventional end-point signal analysis, simultaneously achieving a sensitivity that is 4-10 times higher. Finally, as a demonstration of application, we performed multiplex colorimetric immunoassays using real-time signal analysis covering a wide concentration range of protein targets associated with pre-eclampsia.

Highly Flexible Deep-Learning-Based Automatic Analysis for Graphically Encoded Hydrogel Microparticles

Graphically encoded hydrogel microparticle (HMP)-based bioassay is a diagnostic tool characterized by exceptional multiplex detectability and robust sensitivity and specificity. Specifically, deep learning enables highly fast and accurate analyses of HMPs with diverse graphical codes. However, previous related studies have found the use of plain particles as data to be disadvantageous for accurate analyses of HMPs loaded with functional nanomaterials. Furthermore, the manual data annotation method used in existing approaches is highly labor-intensive and time-consuming. In this study, we present an efficient deep-learning-based analysis of encoded HMPs with diverse graphical codes and functional nanomaterials, utilizing the auto-annotation and synthetic data mixing methods for model training. The auto-annotation enhanced the throughput of dataset preparation up to 0.11 s/image. Using synthetic data mixing, a mean average precision of 0.88 was achieved in the analysis of encoded HMPs with magnetic nanoparticles, representing an approximately twofold improvement over the standard method. To evaluate the practical applicability of the proposed automatic analysis strategy, a single-image analysis was performed after the triplex immunoassay for the preeclampsia-related protein biomarkers. Finally, we accomplished a processing throughput of 0.353 s per sample for analyzing the result image.

Hydrogel particles-on-chip (HyPoC): a fluorescence micro-sensor array for IgG immunoassay

Novel microparticles have generated growing interest in diagnostics for potential sensitivity and specificity in biomolecule detection and for the possibility to be integrated in a micro-system array as a lab-on-chip. Indeed, bead-based technologies integrated in microfluidics could speed up incubation steps, reduce reagent consumption and improve accessibility of diagnostic devices to non-expert users. To limit non-specific interactions with interfering molecules and to exploit the whole particle volume for bioconjugation, hydrogel microparticles, particularly polyethylene glycol-based, have emerged as promising materials to develop high-performing biosensors since their network can be functionalized to concentrate the target and improve detection. However, the limitations in positioning, trapping and mainly fine manipulation of a precise number of particles in microfluidics have largely impaired point-of-care applications. Herein, we developed an on-chip sandwich immunoassay for the detection of human immunoglobulin G in biological fluids. The detection system is based on finely engineered cleavable PEG-based microparticles, functionalized with specific monoclonal antibodies. By changing the particle number, we demonstrated tuneable specificity and sensitivity (down to 3 pM) in serum and urine. Therefore, a controlled number of hydrogel particles have been integrated in a microfluidic device for on-chip detection (HyPoC) allowing for their precise positioning and fluid exchange for incubation, washing and target detection. HyPoC dramatically decreases incubation time from 180 minutes to one minute and reduces washing volumes from 3.5 ml to 90 μL, achieving a limit of detection of 0.07 nM (with a dynamic range of 0.07-1 nM). Thus, the developed approach represents a versatile, fast and easy point-of-care testing platform for immunoassays.

One-step assembly of barcoded planar microparticles for efficient readout of multiplexed immunoassay

Barcoded planar microparticles are suitable for developing cost-efficient multiplexed assays, but the robustness and efficiency of the readout process still needs improvement. Here, we designed a one-step microparticle assembling chip that produces efficient and accurate multiplex immunoassay readout results. Our design was also compatible with injection molding for mass production.

Recent Advances in Polymer Additive Engineering for Diagnostic and Therapeutic Hydrogels

Hydrogels are hydrophilic polymer materials that provide a wide range of physicochemical properties as well as are highly biocompatible. Biomedical researchers are adapting these materials for the ever-increasing range of design options and potential applications in diagnostics and therapeutics. Along with innovative hydrogel polymer backbone developments, designing polymer additives for these backbones has been a major contributor to the field, especially for expanding the functionality spectrum of hydrogels. For the past decade, researchers invented numerous hydrogel functionalities that emerge from the rational incorporation of additives such as nucleic acids, proteins, cells, and inorganic nanomaterials. Cases of successful commercialization of such functional hydrogels are being reported, thus driving more translational research with hydrogels. Among the many hydrogels, here we reviewed recently reported functional hydrogels incorporated with polymer additives. We focused on those that have potential in translational medicine applications which range from diagnostic sensors as well as assay and drug screening to therapeutic actuators as well as drug delivery and implant. We discussed the growing trend of facile point-of-care diagnostics and integrated smart platforms. Additionally, special emphasis was given to emerging bioinformatics functionalities stemming from the information technology field, such as DNA data storage and anti-counterfeiting strategies. We anticipate that these translational purpose-driven polymer additive research studies will continue to advance the field of functional hydrogel engineering.

Multiplex SNP Genotyping Using SWITCH: Sequence-Specific Nanoparticle with Interpretative Toehold-Mediated Sequence Decoding in Hydrogel

Single nucleotide polymorphisms (SNPs) that can alter phenotypes of individuals play a pivotal role in disease development and, more importantly, responses to therapy. However, SNP genotyping has been challenging due to the similarity of SNP alleles and their low concentration in biological samples. Sequence-specific nanoparticle with interpretative toehold-mediated sequence decoding in hydrogel (SWITCH) for multiplex SNP genotyping is presented. The encoding with gold nanoparticle probes transduces each SNP target to ≈1000 invaders with prominently different sequences between wild and mutant types, featuring polymerase chain reaction (PCR)-free amplification. Subsequently, the toehold-mediated DNA replacement in hydrogel microparticles decodes the invaders via SNP-specific fluorescence signals. The 4-plex detection of the warfarin-associated SNP targets spiked in commercially validated human serum (S1-100ML, Merck) is successfully demonstrated with excellent specificity. This work is the first technology development presenting PCR-free, multiplex SNP genotyping with a single reporting fluorophore, to the best of knowledge.

Microfluidics-assisted synthesis and functionalization of monodisperse colloidal hydrogel particles for optomechanical biosensors

The soft colloidal probe (SCP) assay is a highly versatile sensing principle employing micrometer-sized hydrogel particles as optomechanical transducer elements. We report the synthesis, optimization, and conjugation of SCPs with...

Pushing the detection limits: strategies towards highly sensitive optical-based protein detection

Proteins are one of the main constituents of living cells. Studying the quantities of proteins under physiological and pathological conditions can give valuable insights into health status, since proteins are the functional molecules of life. To be able to detect and quantify low-abundance proteins in biofluids for applications such as early disease diagnostics, sensitive analytical techniques are desired. An example of this application is using proteins as biomarkers for detecting cancer or neurological diseases, which can provide early, lifesaving diagnoses. However, conventional methods for protein detection such as ELISA, mass spectrometry, and western blotting cannot offer enough sensitivity for certain applications. Recent advances in optical-based micro- and nano-biosensors have demonstrated promising results to detect proteins at low quantities down to the single-molecule level, shining lights on their capacities for ultrasensitive disease diagnosis and rare protein detection. However, to date, there is a lack of review articles synthesizing and comparing various optical micro- and nano-sensing methods of enhancing the limits of detections of the antibody-based protein assays. The purpose of this article is to critically review different strategies of improving assay sensitivity using miniaturized biosensors, such as assay miniaturization, improving antibody binding capacity, sample purification, and signal amplification. The pros and cons of different methods are compared, and the future perspectives of this research field are discussed.

Dielectrophoresis assisted high-throughput detection system for multiplexed immunoassays

Digital ELISA is introduced as a novel platform with unique advantages for detecting multiple kinds of single-molecule in the sample. How to improve the sensitivity of detection is the direction of current related research. Here, we report an immunoassay method that applied electrokinetic effects to isolate the individual encoded beads and confine in micro-wells to improve the efficiency of cytokines detection simultaneously. The microfluidic design provided a non-uniform electric field to induce dielectrophoresis (DEP) force and to manipulate the beads. Two wavelengths of excitation light excited the encoded beads for simultaneous detection of reporters. The light was confined to the bottom slide via the principle of total internal reflection. Finally, the concentration of captured cytokines was obtained by picking up each bead from the image and then integrating the intensity of fluorescent light emitted from the reporters. The results demonstrated that the fill percentage of encoded beads was raised from 10-20% to 60-80% via DEP effect. By comparing the fluorescence color of the particle, itself and its surface, the concentration of four target cytokines, IL-2, IL-6, IL-10 and TNF-α, were calculated to the pg/ml level. The spike and recovery experiments verified the efficiency, more than 70% of the target molecules were captured. The reliability of our method was verified by flow cytometry as well. In conclusion, we expect the application of DEP can increase the sensitivity of digital ELISA for multiple rapid detection.

High-Resolution Patterning of Hydrogel Sensing Motifs within Fibrous Substrates for Sensitive and Multiplexed Detection of Biomarkers

There has been an increasing and urgent demand to develop nucleic acid bioassays which not only offer high analytical performance but which are also amenable with point-of-care testing. Hydrogels present a versatile class of materials with biocompatible antifouling properties and the ability to be engineered for a range of advanced sensing applications. Fibrous substrates like nitrocellulose offer low-cost and durable platforms to run complex bioassays while enabling portability and ease of handling. We demonstrate herein the ability to synergistically combine these two materials into a portable biosensing platform by leveraging projection lithography. We demonstrate the direct polymerization of hydrogel sensing motifs within a range of fibrous substrates with precise control over their shape, size, location, and functionality. Spatial encoding of the hydrogel motifs enables the multiplex detection of multiple biomarkers on the same test. As a proof-of-concept, we apply the platform to the detection of microRNA, an emerging class of circulating biomarkers with promising potential for early diagnosis and monitoring of cancer. The assay offers a large dynamic range (over three orders of magnitude), high sensitivity (limit of detection of 2.5 amol), as well as versatility and ease of handling. Finally, the bioassay is validated using real biological samples, namely, total RNA extracted from the sera of late-stage breast cancer patients, demonstrating its utility and compatibility with clinical biosensing applications.

Discontinuous Dewetting in a Degassed Mold for Fabrication of Homogeneous Polymeric Microparticles

Discontinuous dewetting (DD) is an attractive technique that enables the production of large liquid arrays in microwells and is applicable to the synthesis of anisotropic microparticles with complex morphologies. However, such loading of liquids into microwells presents a significant challenge, as the liquids used in this technique should exhibit low mold surface wettability. This study introduces DD in a degassed mold (DM), a simple yet powerful technique that achieves uniform loading of microparticle precursors into large microwell arrays within 1 min. Using this technique, hydrogel microparticles are produced by different polymerization mechanisms with various shapes and sizes, ranging from a few micrometers to hundreds of micrometers. Hydrophobic oil microparticles are produced by the simple plasma treatment of the DM, and agarose microparticles encapsulating bovine serum albumin (in a well-dispersed state) are produced by submerging the DM in fluorinated oil. To demonstrate additional functionality of microparticles using this technique, high concentrations of magnetic nanoparticles are loaded into microparticles for particle-based immunoassays performed in a microwell plate, and the immunoassay performance is comparable to that of ELISA.

Hydrogel-Based Technologies for the Diagnosis of Skin Pathology

Hydrogels, swellable hydrophilic polymer networks fabricated through chemical cross-linking or physical entanglement are increasingly utilized in various biomedical applications over the past few decades. Hydrogel-based microparticles, dressings and microneedle patches have been explored to achieve safe, sustained and on-demand therapeutic purposes toward numerous skin pathologies, through incorporation of stimuli-responsive moieties and therapeutic agents. More recently, these platforms are expanded to fulfill the diagnostic and monitoring role. Herein, the development of hydrogel technology to achieve diagnosis and monitoring of pathological skin conditions are highlighted, with proteins, nucleic acids, metabolites, and reactive species employed as target biomarkers, among others. The scope of this review includes the characteristics of hydrogel materials, its fabrication procedures, examples of diagnostic studies, as well as discussion pertaining clinical translation of hydrogel systems.

Precipitation-based colorimetric multiplex immunoassay in hydrogel particles

Despite a growing demand for more accessible diagnostic technologies, current methods struggle to simultaneously detect multiple analytes with acceptable sensitivity and portability. Colorimetric assays have been widely used due to their simplicity of signal readout, but the lack of multiplexibility has been a perpetual constraint. Meanwhile, particle-based assays offer multiplex detection by assigning an identity code to each analyte, but they often require lab-based equipment unsuitable for portable diagnostics. Here, by merging the two approaches, this paper reports a colorimetric multiplex immunoassay based on hydrogel microparticles that achieves the best of both worlds. The low-cost portable multiplex assay demonstrates sensitivities as high as and dynamic ranges greater than the lab-based enzyme-linked immunosorbent assay (ELISA). These critical advances are made possible by local precipitation and amplification of insoluble colour dyes inside the hydrogel networks. For the first time, enzymatic accumulation of colour dyes in hydrogel particles is reported and the kinetics of colour development is characterized in this work. By taking advantage of the colour signals in the visible spectrum, the hydrogel microparticles were imaged and analysed using low-cost portable devices. The colorimetric multiplex immunoassay was used to successfully detect three target biomarkers of preeclampsia and validated clinically using healthy and patient-derived plasma samples.

A platform for multiplexed colorimetric microRNA detection using shape-encoded hydrogel particles

We report a platform utilizing a reporter enzyme, which produces a chromogenic indigo precipitate that preferentially localizes within a hydrogel microparticle. The 3D network of the hydrogel maintains the rapid target binding kinetics found in solution, while multiplexed target detection is achieved through shape-encoding of the particles. Moreover, the precipitate-laden hydrogels can be imaged with a simple phone camera setup. We used this system to detect microRNA (miRNA) down to 0.22 fmol. We then showed the compatibility of this system with real samples by performing multiplexed miRNA measurements from total RNA from matched colon cancer and normal adjacent tissue.

Phosphorylcholine-based encoded hydrogel microparticles with enhanced fouling resistance for multiplex immunoassays

Due to the growing interest in multiplex protein detection, encoded hydrogel microparticles have received attention as a possible path to high performance multiplex immunoassays through a combination of high multiplexing capability and enhanced binding kinetics. However, their practical operation in real complex samples is still limited because polyethylene glycol, which is the main component of hydrogel particles, suffers from oxidative damage and relatively high fouling properties in biochemical solutions. Here, we introduce poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)-based encoded hydrogel microparticles to perform fouling-resistant multiplex immunoassays, where the anti-fouling characteristics are attributed to the zwitterionic PMPC. By applying a newly developed molding lithography technique, viscous PMPCs with low reactivity were successfully incorporated into the hydrogel network while maintaining uniformity and rigidity for use in multiplex immunoassays. Non-specific protein adsorption on the PMPC particles was reduced by about 37.5% compared to that of conventional PEG particles, which leads to better assay sensitivity. We also validate the multiplex capability of the PMPC particles by performing multiplex detection of two target proteins. Furthermore, we verify that the PMPC particles have a 70% enhancement in anti-fouling characteristics compared to PEG particles in human platelet-rich plasma, potentiating a practical immunoassay platform for clinical diagnosis.

Multiplexed homogeneous digital immunoassay based on single-particle motion analysis

Homogeneous digital immunoassay is a powerful analytical method for highly sensitive protein biomarker detection with a simple protocol. However, it has not been multiplexed yet. In this study, we developed a multiplexed homogeneous digital immunoassay based on single-particle motion analysis (digital homogeneous non-enzyme-linked immunosorbent assay, digital Ho-Non ELISA). In this assay, multiple target antigen molecules react with the optical subpopulation of magnetic nanobeads labeled with fluorescent dyes and capture antigen-specific antibodies. Then, these beads are magnetically pulled into femtoliter-sized reactors. The surface of these reactors is modified with multiple detection antibodies specific to each antigen by molecular tethers. Each antigen on the particles reacts with the detection antibodies anchored to the surface of the reactors. Magnetic force enhances the efficiency of bead encapsulation in the reactors, and subsequent physical compartmentalization of beads enhances the binding efficiency of the antigen-antibody reaction. The tethered beads show characteristic Brownian motion distinct from free diffusion or non-specific binding of the antigen-free beads. The color of the beads is attributed to target-identification, and the number of tethered beads is attributed to the concentration of the specific target. We measured two biomarkers (PSA and IL6) as model targets by multiplexed digital Ho-Non ELISA. Our method showed higher sensitivity compared to previous digital Ho-Non ELISA and could detect multiple targets simultaneously with the same performance as in single-plex detection. This new strategy has the potential to open a new avenue for next-generation multiplexed immunoassays in in vitro diagnostics.

Elimination of Unreacted Acrylate Double Bonds in the Polymer Networks of Microparticles Synthesized via Flow Lithography

Flow lithography (FL), a versatile technique used to synthesize anisotropic multifunctional microparticles, has attracted substantial interest, given that the resulting particles with complex geometries and multilayered biochemical functionalities can be used in a wide variety of applications. However, after this process, there are double bonds remaining from the cross-linkable groups of monomers. The unreacted cross-linkable groups can affect the particles' biochemical properties. Here, we verify that the microparticles produced by FL contain a significant number of unreacted acrylate double bonds (UADBs), which could cause irreversible biochemical changes in the particle and pernicious effects to biological systems. We also confirm that the particles contain a considerable number of UADBs, regardless of the various synthetic (lithographic) conditions that can be used in a typical FL process. We present an effective way to eliminate a substantial amount of UADBs after synthesis by linking biochemically inert poly(ethylene glycol) based on click chemistry. We verify that eliminating UADBs by using this click chemistry approach can efficiently resolve problems, such as the occurrence of random reactions and the cytotoxicity of UADBs.

Direct Conjugation of Streptavidin to Encoded Hydrogel Microparticles for Multiplex Biomolecule Detection with Rapid Probe-Set Modification

Encoded hydrogel microparticles synthesized via flow lithography have drawn attention for multiplex biomarker detection due to their high multiplex capability and solution-like hybridization kinetics. However, the current methods for preparing particles cannot achieve a flexible, rapid probe-set modification, which is necessary for the production of various combinations of target panels in clinical diagnosis. In order to accomplish the unmet needs, streptavidin was incorporated into the encoded hydrogel microparticles to take advantage of the rapid streptavidin–biotin interactions that can be used in probe-set modification. However, the existing methods suffer from low efficiency of streptavidin conjugation, cause undesirable deformation of particles, and impair the assay capability. Here, we present a simple and powerful method to conjugate streptavidin to the encoded hydrogel microparticles for better assay performance and rapid probe-set modification. Streptavidin was directly conjugated to the encoded hydrogel microparticles using the aza-Michael addition click reaction, which can proceed in mild, aqueous condition without catalysts. A highly flexible and sensitive assay was developed to quantify DNA and proteins using streptavidin-conjugated encoded hydrogel microparticles. We also validated the potential applications of our particles conducting multiplex detection of cancer-related miRNAs.

Degassed micromolding lithography for rapid fabrication of anisotropic hydrogel microparticles with high-resolution and high uniformity

Replica molding techniques, which are used to synthesize microparticles inside anisotropic micromolds, have been developed to enable the mass production of hydrogel particles. However, these techniques are limited in their ability to synthesize only a narrow range of particle compositions and shapes because of the difficulty in loading precursors into the micromolds as well as the low particle homogeneity due to the uneven evaporation of the precursors. Herein, we describe a simple yet powerful technique, called degassed micromolding lithography, which can load precursors within 1 min regardless of the wettability. This technique is based on the gas-solubility of a degassed micromold that acts as a suction pump to completely fill the mold by drawing precursor liquids in. The semi-closed system within the micromold prevents the uneven evaporation of the precursor, which is essential for the production of homogeneous particles. Furthermore, controlled uniformity of the hydrogel microparticles (C.V. < 2%) can be achieved by engineering the design of the micromold array.

Linker-free antibody conjugation for sensitive hydrogel microparticle-based multiplex immunoassay

Graphically encoded hydrogel microparticles were directly conjugated with reduced antibodies without linkers for highly sensitive multiplex immunoassay.