Simultaneous electrokinetic stacking and separation of anionic and cationic species on a paper fluidic channel

Paper Spray Mass Spectrometry with On-Paper Electrokinetic Manipulations: Part-Per-Trillion Detection of Per/Polyfluoroalkyl Substances in Water and Opioids in Urine

We developed a simple, paper-based device that enables sensitive detection by mass spectrometry (MS) without solid phase extraction or other sample preparation. Using glass fiber filter papers within a 3D printed holder, the device employs electrokinetic manipulations to stack, separate, and desalt charged molecules on paper prior to spray into the MS. Due to counter-balanced electroosmotic flow and electrophoresis, charged analytes stack on the paper and desalting occurs in minutes. One end of the paper strip was cut into a sharp point and positioned near the inlet of a MS. The stacked analyte bands move toward the paper tip with the EOF where they are ionized by paper spray. The device was applied to analysis of PFAS in tap water with sub part-per-trillion detection limits in less than ten minutes with no sample pretreatment. Analysis of opioids in urine also occurs in minutes. The crucial parameters to enable stacking, separation, and MS ionization of both positively and negatively charged analytes were determined and optimized. Experimental and computational modeling studies confirm the electrokinetic stacking and analyte transport mechanisms. On-paper separations were carried out by stacking analyte bands at different locations depending on their electrophoretic mobility, achieving baseline separation in some cases.

Paper electrophoretic enrichment-assisted ultrasensitive SERS detection

To achieve sensitive detection of trace substances in fluids by surface-enhanced Raman spectroscopy (SERS), effective enrichment of molecules at subwavelength regions (hot spots) with a large enhancement is adopted. In this work, a glass fibre paper with Ag nanoparticles (AgNPs) is employed for electrodynamic enrichment of analytes in fluids by paper electrophoresis integrated with field amplification sample stacking (FASS) and capillary effects to obtain both Raman and SERS convenient and sensitive detection. With the help of electrophoretic enrichment on the glass fibre paper and surface plasmon enhancement on the AgNPs, this paper electrophoretic enrichment could improve the detection limit of Raman and SERS detection by more than an order of magnitude, even achieving a SERS detection limit of 10-17 M for Nile Blue A. Furthermore, this flexible SERS detection method can also detect trace organic contaminants at the ppt level in aquaculture and food applications.

Microfluidic paper and thread-based separations: Chromatography and electrophoresis

Paper and thread are widely used as the substrates for fabricating low-cost, disposable, and portable microfluidic analytical devices used in clinical, environmental, and food safety monitoring. Concerning separation methods including chromatography and electrophoresis, these substrates provide unique platforms for developing portable devices. This review focuses on summarizing recent research on the miniaturization of the separation techniques using paper and thread. Preconcentration, purification, desalination, and separation of various analytes are achievable using electrophoresis and chromatography methods integrated with modified or unmodified paper/thread wicking channels. A variety of 2D and 3D designs of paper/thread platforms for zone electrophoresis, capillary electrophoresis, and modified/unmodified chromatography are discussed with emphasis on their limitation and improvements. The current progress in the signal amplification strategies such as isoelectric focusing, isotachophoresis, ion concentration polarization, isoelectric focusing, and stacking methods in paper-based devices are reviewed. Different strategies for chromatographic separations based on paper/thread will be explained. The separation of target species from complex samples and their determination by integration with other analytical methods like spectroscopy and electrochemistry are well-listed. Furthermore, the innovations for plasma and cell separation from blood as an important human biofluid are presented, and the related paper/thread modification methods are explored.

Liquid Plasticine-Based Electrokinetic Enrichment of Proteins

Protein analysis is an important approach for disease diagnosis, in which sample pretreatment is an essential step since protein samples are often complex and many protein biomarkers are of low abundance. Here, given the good openness and light transmission of liquid plasticine (LP), which is a liquid entity formed by SiO₂ nanoparticles and encapsulated aqueous solution, we developed a LP-based field-amplified sample stacking (FASS) system for protein enrichment. The system was composed of a LP container, a sample solution and a Tris-HCl solution containing hydroxyethyl cellulose (HEC). The system design, mechanism investigation, optimization of experimental parameters and characterization of LP-FASS performance for protein enrichment were well studied. Under the optimized experimental conditions of 1 % HEC, 100 mm Tris-HCl and 100 V in the LP-FASS system, a 40-80 times enrichment of proteins was obtained in 40 min using bovine hemoglobin (BHb) as the model protein using the constructed LP-FASS system. The simultaneous enrichment of multiple proteins (phycocyanin, BHb and cytochrome C) was also realized using the system. The LP-FASS system can serve as a new platform for protein enrichment which is easy to be combined with online and offline detections.

Lab-on-Paper Devices for Diagnosis of Human Diseases Using Urine Samples-A Review

In recent years, microfluidic lab-on-paper devices have emerged as a rapid and low-cost alternative to traditional laboratory tests. Additionally, they were widely considered as a promising solution for point-of-care testing (POCT) at home or regions that lack medical infrastructure and resources. This review describes important advances in microfluidic lab-on-paper diagnostics for human health monitoring and disease diagnosis over the past five years. The review commenced by explaining the choice of paper, fabrication methods, and detection techniques to realize microfluidic lab-on-paper devices. Then, the sample pretreatment procedure used to improve the detection performance of lab-on-paper devices was introduced. Furthermore, an in-depth review of lab-on-paper devices for disease measurement based on an analysis of urine samples was presented. The review concludes with the potential challenges that the future development of commercial microfluidic lab-on-paper platforms for human disease detection would face.

Salty Biofluidic Sample Clean-Up and Preconcentration with a Paper-Based Ion Concentration Polarization Interface

Charged species from complex media could be separated and enriched taking advantage of ion concentration polarization (ICP) effect; thus, ICP can be used for sample purification and improvement of detection sensitivity. In this paper, a novel and reliable ICP interface was established on a paper-based analytical device (PAD) by using ion exchange membrane, and electrokinetic stacking of target analytes from salty media was successfully demonstrated. Steady ICP effect was well observed in aqueous solution with up to 400 mM NaCl as shown by a fluorescent probe, which makes it possible to directly process salty physiological samples such as blood and urine with this type of PAD. Application of this method was demonstrated by direct online stacking of total protein from urine samples and image-based colorimetric detection by a smartphone camera. The linear response was in the range of 50-350 mg/L (R² = 0.99), with recovery rate in the range of 94.8-107.6% and relative standard deviation below 7.1%. The obtained results were consistent with that of the clinical method. As an off-line sample pretreatment method, the feasibility for rapid tandem mass spectrometry detection of amino acids from serum samples was also investigated, and promising results were obtained. This PAD method is of low cost, easy to operate, and reliable. As a disposable PAD, it is useful not only for sensitive point-of-care testing but also for direct purification and concentration of complex and highly conductive physiological samples for fast and accurate detection with advanced analytical instruments.

Cr speciation analysis based on electrokinetic sample pretreatment with a paper based analytical device

This work presents a new method of Cr speciation analysis based on micro sample pretreatment with a paper-based analytical device (PAD). By using electrokinetic separation and stacking on the PAD, Cr (VI) and Cr (III) can be separated and the recovered to achieve speciation analysis without have to be subjected to subtraction treatment. The separation and recovery properties of Cr (VI) and Cr (III) were characterized and optimized by UV-Vis spectrophotometry, with which the LOQ of 19.0 μg L^-1 and 28.7 μg L^-1, and the recoveries of 88-108% and 90-110%, were obtained for Cr (VI) and Cr (III), respectively. In addition, direct analysis of Cr (VI)/Cr (III) from an electroplating wastewater sample was also demonstrated with this method combined with atomic spectroscopy (GF-AAS and ICP-OES). This sample pretreatment method is fast, cheap and easy to be used. Combined with the high sensitivity and elemental selectivity of atomic spectroscopy and mass spectrometry, this PAD sample pretreatment method could be a compensation to their lack in speciation discrimination, and may play an important role in the speciation analysis of Cr.

Recent Advances in Microfluidic Devices for Contamination Detection and Quality Inspection of Milk

Milk is a necessity for human life. However, it is susceptible to contamination and adulteration. Microfluidic analysis devices have attracted significant attention for the high-throughput quality inspection and contaminant analysis of milk samples in recent years. This review describes the major proposals presented in the literature for the pretreatment, contaminant detection, and quality inspection of milk samples using microfluidic lab-on-a-chip and lab-on-paper platforms in the past five years. The review focuses on the sample separation, sample extraction, and sample preconcentration/amplification steps of the pretreatment process and the determination of aflatoxins, antibiotics, drugs, melamine, and foodborne pathogens in the detection process. Recent proposals for the general quality inspection of milk samples, including the viscosity and presence of adulteration, are also discussed. The review concludes with a brief perspective on the challenges facing the future development of microfluidic devices for the analysis of milk samples in the coming years.

Recent advances in lab-on-paper diagnostic devices using blood samples

Lab-on-paper, or microfluidic paper-based analytical devices (μPADs), use paper as a substrate material, and are patterned with a system of microchannels, reaction zones and sensing elements to perform analysis and detection. The sample transfer in such devices is performed by capillary action. As a result, external driving forces are not required, and hence the size and cost of the device are significantly reduced. Lab-on-paper devices have thus attracted significant attention for point-of-care medical diagnostic purposes in recent years, particularly in less-developed regions of the world lacking medical resources and infrastructures. This review discusses the major advances in lab-on-paper technology for blood analysis and diagnosis in the past five years. The review focuses particularly on the many clinical applications of lab-on-paper devices, including diabetes diagnosis, acute myocardial infarction (AMI) detection, kidney function diagnosis, liver function diagnosis, cholesterol and triglyceride (TG) analysis, sickle-cell disease (SCD) and phenylketonuria (PKU) analysis, virus analysis, C-reactive protein (CRP) analysis, blood ion analysis, cancer factor analysis, and drug analysis. The review commences by introducing the basic transmission principles, fabrication methods, structural characteristics, detection techniques, and sample pretreatment process of modern lab-on-paper devices. A comprehensive review of the most recent applications of lab-on-paper devices to the diagnosis of common human diseases using blood samples is then presented. The review concludes with a brief summary of the main challenges and opportunities facing the lab-on-paper technology field in the coming years.

Recent advances in paper-based preconcentrators by utilizing ion concentration polarization

One of the most cited limitations of biochemical detection is its poor sensitivity, owing to the relatively high complexity of micro-samples. Moreover, some samples cannot be easily self-replicated and their abundance cannot be increased through traditional technologies. Therefore, the preconcentration of low-abundance samples is a key requirement for microfluidic biological analysis. In recent years, the ion-concentration polarization phenomenon has aroused widespread interest in the application of microfluidic technology. In addition, paper-based materials are readily available, easy to modify, and exhibit good hydrophilicity. The study of the ion-concentration polarization preconcentration of micro-samples in paper-based microfluidic chips is of considerable significance. In this review, we discuss the development and applications of ion-concentration polarization paper-based preconcentrator in the past 5 years, with emphasis on key progresses in chip fabrication and performance optimization under different conditions. The current needs and development prospects in this field have also been discussed.

Focusing, sorting, and separating microplastics by serial faradaic ion concentration polarization

In this article, we report continuous sorting of two microplastics in a trifurcated microfluidic channel using a new method called serial faradaic ion concentration polarization (fICP). fICP is an electrochemical method for forming ion depletion zones and their corresponding locally elevated electric fields in microchannels. By tuning the interplay between the forces of electromigration and convection during a fICP experiment, it is possible to control the flow of charged objects in microfluidic channels. The key findings of this report are threefold. First, fICP at two bipolar electrodes, configured in series and operated with a single power supply, yields two electric field gradients within a single microfluidic channel (i.e., serial fICP). Second, complex flow variations that adversely impact separations during fICP can be mitigated by minimizing convection by electroosmotic flow in favor of pressure-driven flow. Finally, serial fICP within a trifurcated microchannel is able to continuously and quantitatively focus, sort, and separate microplastics. These findings demonstrate that multiple local electric field gradients can be generated within a single microfluidic channel by simply placing metal wires at strategic locations. This approach opens a vast range of new possibilities for implementing membrane-free separations.

Sensitive colorimetric detection of Pb2+ by geometric field amplification and surface plasmon resonance visualization

Pb²⁺ is one of the major environmental pollutants, which can be visually detected by surface plasmon resonance of nanoparticles. Paper based analytical device, as a newly developed microfluidic detection platform, is featured in cost-effective and suitable for on-site analysis. In this paper, a sensitive and portable detection method for Pb²⁺ was proposed, in which Pb²⁺ was electrokinetically stacked on the paper fluidic channel by geometric field amplification effect and visualized online by glutathione-modified silver nanoparticles. Colorimetric quantification of the visualized stacking band was conducted by smart phone camera. To avoid unfavorable influence from pH change on the surface plasmon resonance visualization, field amplification effect was introduced by geometric design of the paper fluidic channel. The enriched Pb²⁺ was clearly visible on the paper substrate, and the stacking band intensity was about four orders of magnitude enhanced, comparing to the intensity without stacking. A linear response to Pb²⁺ was observed in the range of 0.3-7.0 μM (R² = 0.997) with a limit of detection of 86 nM and a limit of quantity of 0.28 μM. The established method was used in the detection of Pb²⁺ from river and lake water samples, and the results were confirmed by atomic absorption spectroscopy method.

Electro-kinetically driven route for highly sensitive blood pathology on a paper-based device

Enhancing the sensitivity of colorimetric detection in paper-devices is a quintessential step in achieving frugal diagnosis. Here, we demonstrate an effective way of improving the detection sensitivity of paper-based devices, as mediated by electro-kinetic mechanisms. By directly employing blood plasma, we investigate the electro-kinetic clustering of glucose, a neutral molecule in paper devices. Under the influence of uniform electric field, dispersed glucose gets accumulated in the paper strips. Due to the combination of EOF and electrophoretic migration, we achieve twofold increase in the colour intensity for both normal and diabetic samples. This approach is robust and possesses better sensitivity than conventional colorimetric assays and can be easily extended to other body fluid based diagnosis. These results may turn out to be of profound importance in improving the quality of pathological diagnosis in low-cost paper-based point-of-care devices deployed in resource-limited settings.