Relating the rate of growth of metal nanoparticles to cluster size distribution in electroless deposition

Conducting Gold Nanoparticle Films via Sessile Drop Evaporation

The deposit patterns obtained from the evaporation of drops containing insoluble solute particles are vital for several technologies, including inkjet printing and optical and electronic device manufacturing. In this work, we consider the evaporation of an aqueous reaction mixture typically used for gold nanoparticle (AuNP) synthesis. The patterns obtained from the evaporation-driven assembly of in situ generated AuNPs are studied using optical microscopy and SEM analyses. The evaporation of drops withdrawn at different reaction times is found to significantly influence the distribution of AuNPs in the dried patterns. The evolution of the deposit patterns is also explored by drying multiple drops on the solid substrate, wherein a drop of a fresh reaction mixture is introduced over the deposit pattern left by the evaporation of the drop dispensed at an earlier time. Using quantitative image analysis, we show that the interparticle separation between the AuNPs in the dried patterns left on the solid substrate decreases when the number of drops is increased. We find optimal conditions to achieve solid-supported AuNP films, wherein the particles are in close physical contact, leading to a conducting deposit. The current through the AuNP deposit is found to increase with increase in the number of drops due to evaporation-driven self-assembly of AuNPs into branch-like structures with reduced interparticle separation. In addition, we also show that it is possible to produce conducting AuNP deposits by drying multiple drops withdrawn from the same reaction mixture. The evaporation-driven assembly of the in situ grown nanoparticles from a reaction mixture presented in this work can be further exploited in optical and electronic device fabrication.

SERS-based immunoassay on a plasmonic syringe filter for improved sampling and labeling efficiency of biomarkers

Rapid, sensitive, and quantitative detection of biomarkers is needed for early diagnosis of disease and surveillance of infectious outbreaks. Here, we exploit a plasmonic syringe filter and surface-enhanced Raman spectroscopy (SERS) in the development of a rapid detection system, using human IgG as a model diagnostic biomarker. The novel assay design facilitates multiple passages of the sample and labeling solution through the detection zone enabling us to investigate and maximize sampling efficiency to the capture substrate. The vertical flow immunoassay process in this study involves the utilization of filter paper embedded with gold nanoparticles (AuNPs) to form a plasmonic substrate. Capture antibody (anti-human IgG) is then immobilized onto the prepared plasmonic paper and inserted into a vertical flow device (syringe filter holder). Sample solution is passed through the filter paper and the target antigen (human IgG) is selectively captured by the immobilized antibody to form an antibody-antigen complex. Next, functionalized AuNPs as extrinsic Raman labels (ERLs) are passed through the filter paper to label the captured biomarker molecules forming a layered structure. This sandwiched geometry enhances plasmonic coupling and SERS signal to provide highly sensitive detection of biomolecules. Systematic studies to investigate the impact of multiple infuse/withdraw cycles of the sample and labeling solutions reveal that antigen and ERL binding are maximized with 10 and 20 cycles, respectively. The optimized assay achieves a detection limit of ∼0.2 ng mL-1 for human IgG with a total assay time of less than 5 minutes, meeting the demands for rapid point of care diagnostics. Additionally, the optimized platform was implemented in the quantitative analysis of the SARS-CoV-2 nucleocapsid protein, the typical target in commercial, FDA-approved rapid antigen tests for COVID-19.

Controlling oxygen vacancies of CoMn2O4 by loading on planar and tubular clay minerals and its application for boosted PMS activation

A representative transition metal oxide (TMO), CoMn₂O₄ (CMO), is recognized as an effective peroxymonosulfate (PMS) activator with disadvantages like limited reactive sites and metal leakage. Herein, novel catalysts were synthesized by anchoring CMO on kaolinite (Kln) and halloysite (Hal) matrixes, two natural clay minerals with lamellar and tubular structures, for PMS activation in pharmaceutical degradation. Hal and Kln helped to control the crystallinity of CMO spontaneously with induce oxygen vacancies (OVs), which significantly enhanced the working efficiency. The reaction rate constants of Hal/CMO and Kln/CMO towards OFX degradation were nearly triple and twice that of bare CMO, respectively, with a 60% decrease in metal usage. The formation of OVs provided additional active sites for the reaction and accelerated the electron transfer. CMO/Hal and CMO/Kln exhibited better stability and durability than CMO, while CMO/Kln showed higher structural stability with lower metal leaching after 3 rounds of reaction. The higher crystallinity of CMO/Kln resulted in less OVs, but higher structural stability. The universal applicability of CMO/Hal and CMO/Kln were verified by using three other pharmaceuticals as probes. This work shed light on the modification of TMO catalysts by introducing clay mineral substrates for the efficient and ecofriendly remediation of pharmaceuticals in wastewater.

Single-Atom (Iron-Based) Catalysts: Synthesis and Applications

Supported single-metal atom catalysts (SACs) are constituted of isolated active metal centers, which are heterogenized on inert supports such as graphene, porous carbon, and metal oxides. Their thermal stability, electronic properties, and catalytic activities can be controlled via interactions between the single-metal atom center and neighboring heteroatoms such as nitrogen, oxygen, and sulfur. Due to the atomic dispersion of the active catalytic centers, the amount of metal required for catalysis can be decreased, thus offering new possibilities to control the selectivity of a given transformation as well as to improve catalyst turnover frequencies and turnover numbers. This review aims to comprehensively summarize the synthesis of Fe-SACs with a focus on anchoring single atoms (SA) on carbon/graphene supports. The characterization of these advanced materials using various spectroscopic techniques and their applications in diverse research areas are described. When applicable, mechanistic investigations conducted to understand the specific behavior of Fe-SACs-based catalysts are highlighted, including the use of theoretical models.

Experimental and Theoretical Studies on Sustainable Synthesis of Gold Sol Displaying Dichroic Effect

Gold nanoparticles depending on their shape and mixtures of multiple shapes can exhibit peculiar optical properties, including the dichroic effect typical of the Lycurgus cup, which has puzzled scientists for a long time. Such optical properties have been recently exploited in several fields such as paint technology, sensors, dichroic polarizers, display (LCD) devices, laser applications, solar cells and photothermal therapy among others. In this article, we have demonstrated a simple room temperature one-pot synthesis of gold sol displaying a dichroic effect using a slow reduction protocol involving only trisodium citrate as a reducing agent. We found that the dichroic gold sol can be easily formed at room temperature by reducing gold salt by trisodium citrate below a certain critical concentration. The sol displayed an orangish-brown color in scattered/reflected light and violet/blue/indigo/purple/red/pink in transmitted light, depending on the experimental conditions. With minor changes such as the introduction of a third molecule or replacing a small amount of water in the reaction mixture with ethanol, the color of the gold sol under transmitted light changed and a variety of shades of red, pink, cobalt blue, violet, magenta and purple were obtained. The main advantage of the proposed method lies in its simplicity, which involves the identification of the right ratio of the reactants, and simple mixing of reactants at room temperature with no other requirements. TEM micrographs displayed the formation of two main types of particles viz. single crystal gold nanoplates and polycrystalline faceted polyhedron nanoparticles. The mechanism of growth of the nanoplates and faceted polyhedron particles have been described by an enhanced diffusion limited aggregation numerical scheme, where it was assumed that both trisodium citrate and the gold ions in solution undergo a stochastic Brownian motion, and that the evolution of the entire system is regulated by a principle of energy minimization. The predictions of the model matched with the experiments with a good accuracy, indicating that the initial hypothesis is correct.

3D-MID Technology for Surface Modification of Polymer-Based Composites: A Comprehensive Review

The three-dimensional molded interconnected device (3D-MID) has received considerable attention because of the growing demand for greater functionality and miniaturization of electronic parts. Polymer based composite are the primary choice to be used as substrate. These materials enable flexibility in production from macro to micro-MID products, high fracture toughness when subjected to mechanical loading, and they are lightweight. This survey proposes a detailed review of different types of 3D-MID modules, also presents the requirement criteria for manufacture a polymer substrate and the main surface modification techniques used to enhance the polymer substrate. The findings presented here allow to fundamentally understand the concept of 3D-MID, which can be used to manufacture a novel polymer composite substrate.

Sandwiching analytes with structurally diverse plasmonic nanoparticles on paper substrates for surface enhanced Raman spectroscopy

This report describes the systematic combination of structurally diverse plasmonic metal nanoparticles (AgNPs, AuNPs, Ag core–Au shell NPs, and anisotropic AuNPs) on flexible paper-based materials to induce signal-enhancing environments for surface enhanced Raman spectroscopy (SERS) applications. The anisotropic AuNP-modified paper exhibits the highest SERS response due to the surface area and the nature of the broad surface plasmon resonance (SPR) neighboring the Raman excitation wavelength. The subsequent addition of a second layer with these four NPs (e.g., sandwich arrangement) leads to the notable increase of the SERS signals by inducing a high probability of electromagnetic field environments associated with the interparticle SPR coupling and hot spots. After examining sixteen total combinations, the highest SERS response is obtained from the second layer with AgNPs on the anisotropic AuNP paper substrate, which allows for a higher calibration sensitivity and wider dynamic range than those of typical AuNP–AuNP arrangement. The variation of the SERS signals is also found to be below 20% based on multiple measurements (both intra-sample and inter-sample). Furthermore, the degree of SERS signal reductions for the sandwiched analytes is notably slow, indicating their increased long-term stability. The optimized combination is then employed in the detection of let-7f microRNA to demonstrate their practicability as SERS substrates. Precisely introducing interparticle coupling and hot spots with readily available plasmonic NPs still allows for the design of inexpensive and practical signal enhancing substrates that are capable of increasing the calibration sensitivity, extending the dynamic range, and lowering the detection limit of various organic and biological molecules.

Systematic combination of plasmonic nanoparticles on a paper-based substrate introduces SERS-based signal-enhancement environments via interparticle coupling and hot spots.