In situ synthesis of europium oxide (Eu2O3) nanoparticles in heteroatom doped carbon nanofibers for boosting the cycling stability of supercapacitors

Maintaining a high specific energy without losing cycling stability is the focus of the supercapacitor field. In this study, carbon nanofibers including europium oxide nanoparticles (CNF/Eu2O3) have been synthesized in the presence of thiourea via a simple approach and applied for the first time as an electrode for SCs. The CNF/Eu2O3-1 electrode doped with nitrogen and sulfur heteroatoms possessed a favorable specific capacitance of 183.2 F g-1, a specific energy of 9.15 W h kg-1, and an excellent capacitance retention of 94.8% even after 10 000 cycles at 1 A g-1. Such excellent performance is ascribed to the surface functionalities, high surface area, and good interaction of Eu2O3 with CNFs. This strategy will provide guidance for other rare element-based electrodes in the field of energy storage.

Polyindole Embedded Nickel/Zinc Oxide Nanocomposites for High-Performance Energy Storage Applications

Conducting polymers integrated with metal oxides create opportunities for hybrid capacitive electrodes. In this work, we report a one-pot oxidative polymerization for the synthesis of integrated conductive polyindole/nickel oxide (PIn/NiO), polyindole/zinc oxide (PIn/ZnO), and polyindole/nickel oxide/zinc oxide (PNZ). The polymers were analyzed thoroughly for their composition and physical as well as chemical properties by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), and thermogravimetric analysis (TGA). The PIn and its composites were processed into electrodes, and their use in symmetrical supercapacitors in two- and three-electrode setups was evaluated by cyclic voltammetry (CV), galvanostatic discharge (GCD), and electrochemical impedance spectroscopy (EIS). The best electrochemical charge storage capability was found for the ternary PNZ composite. The high performance directly correlates with its uniformly shaped nanofibrous structure and high crystallinity. For instance, the symmetrical supercapacitor fabricated with PNZ hybrid electrodes shows a high specific capacitance of 310.9 F g^-1 at 0.5 A g^-1 with an energy density of 42.1 Wh kg^-1, a power density of 13.2 kW kg^-1, and a good cycling stability of 78.5% after 5000 cycles. This report presents new electrode materials for advanced supercapacitor technology based on these results.

Rare Earth Doping Engineering Tailoring Advanced Oxygen-Vacancy Co3 O4 with Tunable Structures for High-Efficiency Energy Storage

Co₃ O₄  with high theoretical capacitance is a promising electrode material for high-end energy applications, yet the unexcited bulk electrochemical activity, low conductivity, and poor kinetics of Co₃ O₄  lead to unsatisfactory charge storage capacity. For boosting its energy storage capability, rare earth (RE)-doped Co₃ O₄  nanostructures with abundant oxygen vacancies are constructed by simple, economical, and universal chemical precipitation. By changing different types of RE (RE = La, Yb, Y, Ce, Er, Ho, Nd, Eu) as dopants, the RE-doped Co₃ O₄  nanostructures can be well transformed from large nanosheets to coiled tiny nanosheets and finally to ultrafine nanoparticles, meanwhile, their specific surface area, pore distribution, the ratio of Co²⁺ /Co³⁺ , oxygen vacancy content, crystalline phase, microstrain parameter, and the capacitance performance are regularly affected. Notably, Eu-doped Co₃ O₄  nanoparticles with good cycle stability show a maximum specific capacitance of 1021.3 F g^-1 (90.78 mAh g^-1 ) at 2 A g^-1 , higher than 388 F g^-1 (34.49 mAh g^-1 ) of pristine Co₃ O₄  nanosheets. The assembling asymmetric supercapacitor delivers a high energy density of 48.23 Wh kg^-1  at high power density of 1.2 kW kg^-1 . These findings denote the significance and great potential of RE-doped Co₃ O₄  in the development of high-efficiency energy storage.

Rare Earth-Based Nanomaterials for Supercapacitors: Preparation, Structure Engineering and Application

Supercapacitors (SCs) can effectively alleviate problems such as energy shortage and serious greenhouse effect. The properties of electrode materials directly affect the performance of SCs. Rare earth (RE) is known as "modern industrial vitamins", and their functional materials have been listed as key strategic materials. In the past few years, the number of scientific reports on RE-based nanomaterials for SCs has increased rapidly, confirming that adding RE elements or compounds to the host electrode materials with various nanostructured morphologies can greatly enhance their electrochemical performance. Although RE-based nanomaterials have made rapid progress in SCs, there are very few works providing a comprehensive survey of this field. In view of this, a comprehensive overview of RE-based nanomaterials for SCs is provided here, including the preparation methods, nanostructure engineering, compounds, and composites, along with their capacitance performances. The structure-activity relationships are discussed and highlighted. Meanwhile, the future challenges and perspectives are also pointed out. This Review can not only provide guidance for the further development of SCs but also arouse great interest in RE-based nanomaterials in other research fields such as electrocatalysis, photovoltaic cells, and lithium batteries.

Copper alumina @ poly (aniline-co-indole) nanocomposites: synthesis, characterization, electrical properties and gas sensing applications

Poly(aniline-co-indole)/copper alumina (PANI-co-PIN/Cu–Al₂O₃) with excellent AC conductivity, dielectric properties, and ammonia gas detecting capabilities were synthesised via in situ chemical oxidative polymerization. The presence of Cu–O bonding vibrations and shift of some characteristic peaks in the Fourier transform infrared spectroscopy (FT-IR) revealed the successful encapsulation of Cu–Al₂O₃ nanoparticles in the copolymer. The XRD studies showed the crystalline peaks of Cu–Al₂O₃ in the PANI-co-PIN nanocomposites. The high-resolution transmission electron microscopy (HR-TEM) images confirmed the reinforcement of the inorganic moiety in the copolymer. The results from thermogravimetric analysis (TGA) showed that the inclusion of Cu–Al₂O₃ in the copolymer matrix greatly increases the thermal stability of PANI-co-PIN. The alternate current (AC) conductivity and dielectric properties of nanocomposites were higher than pure PANI-co-PIN. The improved electrical properties of nanocomposites were due to strong contact between the copolymer and metal oxide surfaces. The gas sensing properties of synthesized copolymer nanocomposites showed excellent sensitivity and response towards ammonia gas at room temperature. The PANI-co-PIN/5 wt% Cu–Al₂O₃ nanocomposite has the best gas sensing characteristics. The higher AC conductivity, dielectric properties and gas sensing characteristics of PANI-co-PIN/Cu–Al₂O₃ might be used to develop electrochemical sensing devices.

PANI-co-PIN/Cu–Al₂O₃ nanocomposites synthesised via in situ polymerization showed excellent electrical and NH₃ gas sensing properties.

Synthesis, Characterization and Electrochemical Performance of a Redox-Responsive Polybenzopyrrole@Nickel Oxide Nanocomposite for Robust and Efficient Faraday Energy Storage

A polybenzopyrrole@nickel oxide (Pbp@NiO) nanocomposite was synthesized by an oxidative chemical one-pot method and tested as an active material for hybrid electrodes in an electrochemical supercapattery device. The as-prepared composite material exhibits a desirable 3D cross-linked nanostructured morphology and a synergistic effect between the polymer and metal oxide, which improved both physical properties and electrochemical performance. The unprocessed material was characterized by X-ray diffraction, FTIR and UV-Vis spectroscopy, scanning electron microscopy/energy disperse X-ray analysis, and thermogravimetry. The nanocomposite material was deposited without a binder on gold current collectors and investigated for electrochemical behavior and performance in a symmetrical two- and three-electrode cell setup. A high specific capacity of up to 105 C g-1 was obtained for the Pbp@NiO-based electrodes with a gravimetric energy density of 17.5 Wh kg-1, a power density of 1925 W kg-1, and excellent stability over 10,000 cycles.

Fabrication of a composite material of Gd2O3, Co3O4 and graphene on nickel foam for high-stability supercapacitors

The Gd2O3/Co3O4/rGO/NF electrode was prepared using a one-step hydrothermal method and annealing process, with high specific capacitance and excellent cycle stability.

Ternary 3D reduced graphene oxide/Ni0.5Zn0.5Fe2O4/polyindole nanocomposite for supercapacitor electrode application

A facile two-step strategy has been reported for the preparation of a ternary 3D reduced graphene oxide/Ni_0.5Zn_0.5Fe₂O₄/polyindole nanocomposite (GNP) and this composite is applied as an electrode material for supercapacitor applications. Remarkably, Ni_0.5Zn_0.5Fe₂O₄ nanoparticles (NZF) decorated on reduced graphene oxide (GN2) are achieved by a facile hydrothermal method followed by coating with polyindole (PIN) through an in situ emulsion polymerization process. The structure, porosity, morphology, and thermal stability of the resulting ternary GNP hybrid material were characterized via X-ray diffraction (XRD), Raman spectroscopy, Brunauer–Emmett–Teller (BET) surface area measurements, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). This combination of hybrid material has a favorable mesoporous structure that enables high exposure of active sites for fast electron transport for supercapacitor applications. We demonstrate here that the ternary GNP hybrid electrode material is capable of delivering a favorable specific capacitance of ∼320 F g⁻¹ at 0.3 A g⁻¹ within the potential range from −0.1 to 1 V, with desirable rate stability and excellent cycling stability in the three-electrode system. Furthermore, an asymmetric supercapacitor (ASC) of a two-electrode configuration was fabricated using 3D RGO and GNP as the negative and positive electrodes, respectively. Such a device manifests a favourable C_sp of 48.9 F g⁻¹ at 0.5 A g⁻¹ and retains stability of 84% even after 2000 cycles. This ASC device exhibits a significant energy density of 16.38 W h kg⁻¹ at a power density of 1784 W kg⁻¹. The synergistic effects of pseudo and double layer capacitive contributions from PIN and GN2 make this ternary GNP hybrid electrode material of great promise in supercapacitor applications.

A facile two-step strategy has been reported for the preparation of a ternary 3D reduced graphene oxide/Ni_0.5Zn_0.5Fe₂O₄/polyindole nanocomposite (GNP) and this composite is applied as an electrode material for supercapacitor applications.

Physical, Chemical, and Electrochemical Properties of Redox-Responsive Polybenzopyrrole as Electrode Material for Faradaic Energy Storage

Polybenzopyrrole (Pbp) is an emerging candidate for electrochemical energy conversion and storage. There is a need to develop synthesis strategies for this class of polymers that can help improve its overall properties and make it as suitable for energy storage applications as other well-studied polymers in this substance class, such as polyaniline and polypyrrole. In this study, by synthesizing Pbp in surfactant-supported acidic medium, we were able to show that the physicochemical and electrochemical properties of Pbp-based electrodes are strongly influenced by the respective polymerization conditions. Through appropriate optimization of various reaction parameters, a significant enhancement of the thermal stability (up to 549.9 °C) and the electrochemical properties could be achieved. A maximum specific capacitance of 166.0 ± 2.0 F g⁻¹ with an excellent cycle stability of 87% after 5000 cycles at a current density of 1 A g⁻¹ was achieved. In addition, a particularly high-power density of 2.75 kW kg⁻¹ was obtained for this polybenzopyrrole, having a gravimetric energy density of 17 Wh kg⁻¹. The results show that polybenzopyrroles are suitable candidates to compete with other conducting polymers as electrode materials for next-generation Faradaic supercapacitors. In addition, the results of the current study can also be easily applied to other systems and used for adaptations or new syntheses of advanced hybrid/composite Pbp-based electrode materials.

A new neodymium-phosphine compound for supercapacitors with long-term cycling stability

A new neodymium-phosphine compound (Nd-(Ph)3P) was used for the first time as an electrode for supercapacitors and exhibited an extraordinary capacitance of 951 F g-1 at 0.5 A g-1 with a high capacitance retention of 96% after 10 000 cycles at 10 A g-1, which is the highest capacitance for rare earth based materials in SCs. Such an excellent performance might be due to the fact that this material can provide plenty of electron-active sites for charge storage and electrolyte diffusion can be efficiently promoted.

Ce(OH)3 as a novel negative electrode material for supercapacitors

Novel electrode materials with desired specific capacitances are needed for supercapacitors. Rare-earth (RE)-based materials are fascinating in the field of catalysis and energy. Herein, a series of hydroxides including La, Ce, Pr and Nd was synthesized via in situ precipitation. Interestingly, only Ce(OH)₃ showed a redox peak in both positive and negative ranges. The other RE hydroxides exhibited a redox peak only in the positive range. Therefore, in order to certify that Ce(OH)₃ can be used as a negative electrode, symmetrical supercapacitors consisting of Ce(OH)₃ as both positive and negative electrodes were assembled, and showed a voltage window of 1.3 V. Moreover, asymmetrical supercapacitors were successfully fabricated, in which the positive electrode was composed of La(OH)₃, Pr(OH)₃ or Nd(OH)₃. These results may pave the way to novel negative electrode materials.

Ultrasound-assisted fabrication of a new nanocomposite electrode of samaria and borazon for high performance supercapacitors

The fabrication of hetero structured materials with supercapacitor applications for industrial use remains a key challenge. This work reports a new supercapacitor material with high capacitance, comprising samaria and borazon (O₃Sm₂/BN) synthesized ultrasonically (40 ± 3 kHz, 200 W). The successful synthesis, probable interfaces between O₃Sm₂ and BN and thermal stability of the nanocomposite were studied by UV-Vis. and FT-IR spectroscopies, X-ray diffraction (XRD) and thermo gravimetric analyses (TGA). The morphology of nanocomposite was investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Elemental mapping analysis and energy dispersive X-ray analysis (EDAX) confirmed the elements present in the material. This supercapacitor material shows a maximum discharge capacitance of 414 Fg^-1 at 0.25 Ag^-1 and an exceptional retention of specific capacitance (92.5%) in 5000 cycles. Such nanocomposite with better specific capacitance and charge/discharge rates makes it a right candidate as next generation supercapacitor, which certainly finds applications in various unconventional energy storage devices.

Terbium metal–organic frameworks as capable electrodes for supercapacitors

Tb-MOF as electrode material for supercapacitors with high specific capacitance and excellent capacitance retention.

The electrochemical applications of rare earth-based nanomaterials

This review presents a general description of the synthesis and electrochemical properties of rare earth-based nanomaterials and their electrochemical applications.